Successful Implementation of an ERP System

Työn tarkoituksena on tarkastella ERP-järjestelmän käyttöönottoa ja tarjota ohjekartta kuinka tehdä se menestyksekkäästi. Lisäksi työ kartoittaa Konecranesin saamia etuja ja hyötyjä yrityksen ottaessa ERP-järjestelmä käyttöön. Käyttöönottoprojekti, sen vaiheet ja muut merkittävät ERP-projekteihin liittyvät vaiheet on kuvattu työssä yksityiskohtaisesti. Ensiksi ERP-järjestelmän käyttöönottoa tarkastellaan kirjallisuuteen perustuen. Myöhemmin sitä tarkastellaan perustuen kirjoittajan kokemuksiin ja havaintoihin ERP-järjestelmän käyttöönotosta, ja vertaillaan käytännön suhdetta teoriaan.ERP-järjestemät ovat kalliita ja niiden käyttöön ottaminen on aikaa vievää. Viimeisen vuosikymmenen aikana yritykset ovat enenevissä määrin alkaneet ottamaan ERP-järjestelmiä käyttöön. ERP-järjestelmät ovat saavuttaneet kasvavaa suosiota mm. niiden operaatioita integroivan ja tehostavan luonteesta ansiosta sekä niiden kyvystä tarjota päivitettyä tietoa reaaliajassa.Myös menestyksekkäissä ERP-projekteissa on parantamisen varaa. Mitattaessa ERP- projektin menestyksellisyyttä pitäisi käyttää sekä määrällisiä että laadullisia mittareita. On helppoa käyttää ainoastaan määrällisiä mittareita. Usein kuitenkin laadulliset asiat ovat tärkeämpiä. Ihmiset on saatava sitoutumaan yhteiseen tavoitteeseen kommunikaation avulla. Huonoja ensivaikutelmia on vaikea muuttaa. Vaikka vaikuttaisikin siltä, että ERP-projekti on onnistunut, kun kaikki näyttää hyvältä ”paperilla”, loppujen lopuksi systeemiä käyttävät ihmiset päättävät projektin menestyksellisyydestä. Järjestelmän käyttöönottohetkeä on pidettävä ERP-projektin ensimmäisenä vaiheena.

Operational Reliability Analysis of a Three-Tiered Thin-Client ERP-system in an International Corporate Environment

Internationalization and the following rapid growth have created the need to concentrate the IT systems of many small-to-medium-sized production companies. Enterprise Resource Planning systems are a common solution for such companies. Deployment of these ERP systems consists of many steps, one of which is the implementation of the same shared system at all international subsidiaries. This is also one of the most important steps in the internationalization strategy of the company from the IT point of view. The mechanical process of creating the required connections for the off-shore sites is the easiest and most well-documented step along the way, but the actual value of the system, once operational, is perceived in its operational reliability. The operational reliability of an ERP system is a combination of many factors. These factors vary from hardware- and connectivity-related issues to administrative tasks and communication between decentralized administrative units and sites. To accurately analyze the operational reliability of such system, one must take into consideration the full functionality of the system. This includes not only the mechanical and systematic processes but also the users and their administration. All operational reliability in an international environment relies heavily on hardware and telecommunication adequacy so it is imperative to have resources dimensioned with regard to planned usage. Still with poorly maintained communication/administration schemes no amount of bandwidth or memory will be enough to maintain a productive level of reliability. This thesis work analyzes the implementation of a shared ERP system to an international subsidiary of a Finnish production company. The system is Microsoft Dynamics Ax, currently being introduced to a Slovakian facility, a subsidiary of Peikko Finland Oy. The primary task is to create a feasible base of analysis against which the operational reliability of the system can be evaluated precisely. With a solid analysis the aim is to give recommendations on how future implementations are to be managed.

Thermal modelling of semiconductor switches in three-level Neutral Point Clamped Medium Voltage DTC-inverter

The aim of this thesis is to investigate the thermal loading of medium voltage three-level NPC inverter’s semiconductor IGCT switches in different operation points. The objective is to reach both a fairly accurate off-line simulation program and also so simple a simulation model that its implementation into an embedded system could be reasonable in practice and a real time use should become feasible. Active loading limitation of the inverter can be realized with a thermal model which is practical in a real time use. Determining of the component heating has been divided into two parts; defining of component losses and establishing the structure of a thermal network. Basics of both parts are clarified. The simulation environment is Matlab-Simulink. Two different models are constructed – a more accurate one and a simplified one. Potential simplifications are clarified with the help of the first one. Simplifications are included in the latter model and the functionalities of both models are compared. When increasing the calculation time step a decreased number of considered components and time constants of the thermal network can be used in the simplified model. Heating of a switching component is dependent on its topological position and inverter’s operation point. The output frequency of the converter defines mainly which one of the switching components is – because of its losses and heating – the performance limiting component of the converter. Comparison of results given by different thermal models demonstrates that with larger time steps, describing of fast occurring switching losses becomes difficult. Generally articles and papers dealing with this subject are written for two-level inverters. Also inverters which apply direct torque control (DTC) are investigated rarely from the heating point of view. Hence, this thesis completes the former material.

The determination of EONIA rate: The impact of the financial crisis and the effects of the changes in the monetary policy implementation framework

EONIA is a market based overnight interest rate, whose role as the starting point of the yield curve makes it critical from the perspective of the implementation of European Central Bank´s common monetary policy in the euro area. The financial crisis that started in 2007 had a large impact on the determination mechanism of this interest rate, which is considered as the central bank´s operational target. This thesis examines the monetary policy implementation framework of the European Central Bank and changes made to it. Furthermore, we discuss the development of the recent turmoil in the money market. EONIA rate is modelled by means of a regression equation using variables related to liquidity conditions, refinancing need, auction results and calendar effects. Conditional volatility is captured by an EGARCH model, and autocorrelation is taken into account by employing an autoregressive structure. The results highlight how the tensions in the initial stage of the market turmoil were successfully countered by ECB´s liquidity policy. The subsequent response of EONIA to liquidity conditions under the full allotment liquidity provision procedure adopted after the demise of Lehman Brothers is also established. A clear distinction in the behavior of the interest rate between the sub-periods was evident. In the light of the results obtained, some of the challenges posed by the exit-strategy implementation will be addressed.

Dialogue in the crisis of representation : realism and antirealism in the context of the conversation between theologians and quantum physicists in Göttingen 1949-1961

The aim of this study is to analyse the content of the interdisciplinary conversations in Göttingen between 1949 and 1961. The task is to compare models for describing reality presented by quantum physicists and theologians. Descriptions of reality indifferent disciplines are conditioned by the development of the concept of reality in philosophy, physics and theology. Our basic problem is stated in the question: How is it possible for the intramental image to match the external object?Cartesian knowledge presupposes clear and distinct ideas in the mind prior to observation resulting in a true correspondence between the observed object and the cogitative observing subject. The Kantian synthesis between rationalism and empiricism emphasises an extended character of representation. The human mind is not a passive receiver of external information, but is actively construing intramental representations of external reality in the epistemological process. Heidegger's aim was to reach a more primordial mode of understanding reality than what is possible in the Cartesian Subject-Object distinction. In Heidegger's philosophy, ontology as being-in-the-world is prior to knowledge concerning being. Ontology can be grasped only in the totality of being (Dasein), not only as an object of reflection and perception. According to Bohr, quantum mechanics introduces an irreducible loss in representation, which classically understood is a deficiency in knowledge. The conflicting aspects (particle and wave pictures) in our comprehension of physical reality, cannot be completely accommodated into an entire and coherent model of reality. What Bohr rejects is not realism, but the classical Einsteinian version of it. By the use of complementary descriptions, Bohr tries to save a fundamentally realistic position. The fundamental question in Barthian theology is the problem of God as an object of theological discourse. Dialectics is Barth¿s way to express knowledge of God avoiding a speculative theology and a human-centred religious self-consciousness. In Barthian theology, the human capacity for knowledge, independently of revelation, is insufficient to comprehend the being of God. Our knowledge of God is real knowledge in revelation and our words are made to correspond with the divine reality in an analogy of faith. The point of the Bultmannian demythologising programme was to claim the real existence of God beyond our faculties. We cannot simply define God as a human ideal of existence or a focus of values. The theological programme of Bultmann emphasised the notion that we can talk meaningfully of God only insofar as we have existential experience of his intervention. Common to all these twentieth century philosophical, physical and theological positions, is a form of anti-Cartesianism. Consequently, in regard to their epistemology, they can be labelled antirealist. This common insight also made it possible to find a common meeting point between the different disciplines. In this study, the different standpoints from all three areas and the conversations in Göttingen are analysed in the frameworkof realism/antirealism. One of the first tasks in the Göttingen conversations was to analyse the nature of the likeness between the complementary structures inquantum physics introduced by Niels Bohr and the dialectical forms in the Barthian doctrine of God. The reaction against epistemological Cartesianism, metaphysics of substance and deterministic description of reality was the common point of departure for theologians and physicists in the Göttingen discussions. In his complementarity, Bohr anticipated the crossing of traditional epistemic boundaries and the generalisation of epistemological strategies by introducing interpretative procedures across various disciplines.

The success factors of the Danish energy service industry

The objective of the research was to understand the success factors of the Danish energy service industry. The research phenomenon was studied greatly but the aim was to examine it from the service logic point of view. The research was threefold and it examined the phenomena from the company, industrial and national levels. The purpose of the multi-level study was to understand all the success factors and to examine how they are combined together. First, the research problem was approached through the literature review. After that, the empirical part of the study was conducted as a case study and the data was collected by theme interviews. The collected data was analyzed through theoretical point of view and compared with earlier studies. This study shows that the most important success factor was the country, because it has affected to the other aspects of the success. Because the actors of the industry are linked together tightly, communication and common understanding of business is essential to the industry success. The new energy technologies do not produce directly added value for the customers. This has sifted energy business towards service business, and the customers have been included in the value creation process.

Beauty for Sale - An Empirical Study of Appearance-Related Consumption in Finland

This study examines appearance-related consumption in Finland. The theoretical portion discusses appearance-related consumption, on one hand from a consumer culture perspective, as both a possibility and responsibility for everyone; and on the other hand, from the point of view of behaviour and attitudes associated with sociodemographic and lifestyle-related factors. The empirical part of the study concentrates on the following aspects: 1) Finns’ appearance-related consumption patterns, attitudes towards appearance-related consumption and attending to one’s looks through consumption, as well as general changes in consumption patterns and attitudes; 2) gender differences in attitudes and consumption patterns, and their possible changes over time, and; 3) other differences among population groups in attitudes and consumption patterns, and their possible changes over time. The following dissertation utilises data from seven different nationally representative surveys. Data include Finnish Household Budget surveys from 1998 (N=4 359), 2001 (N=5 495) and 2006 (N=4 007), as well as, The Everyday Life and Well-being Survey (N=908) collected in 2011, and Finland 1999 (N=2 417), Finland 2004 (N=3 574) and Finland 2009 (N=1 202) surveys. The study indicates that Finns’ relationship to appearance-related consumption is, generally, somewhat inconsistent. In Finland, a significant share of a household’s total spending, around the EU average, is allocated to products and services related to appearance. In addition, at an attitudinal level, physical appearance is important to most Finnish consumers. However, in many respects, these attitudes reflect a certain reservation towards appearance-related consumption practices. The number of those consumers who see themselves as truly dedicated to attending to their looks through consumption is quite small, whereas the amount of those willing to take a reserved or even negative attitude towards appearance-related consumption is clearly higher. Attitudes towards attending to one’s looks and the importance of appearance-related consumption had not changed during the past decade. Study shows that at present, appearance-related consumption is a form of consumption that is particularly important to women, younger consumers, people with middle or higher income, and those with normal weight. Gender is in the key role when explaining appearance-related consumption and contrary to common belief, gender differences seem to have stayed quite stable. The results also indicate that, to some extent, differences between younger and older age groups might be diminishing.

Hydrometallurgical recovery of valuable metals from secondary raw materials

Wastes and side streams in the mining industry and different anthropogenic wastes often contain valuable metals in such concentrations their recovery may be economically viable. These raw materials are collectively called secondary raw materials. The recovery of metals from these materials is also environmentally favorable, since many of the metals, for example heavy metals, are hazardous to the environment. This has been noticed in legislative bodies, and strict regulations for handling both mining and anthropogenic wastes have been developed, mainly in the last decade. In the mining and metallurgy industry, important secondary raw materials include, for example, steelmaking dusts (recoverable metals e.g. Zn and Mo), zinc plant residues (Ag, Au, Ga, Ge, In) and waste slurry from Bayer process alumina production (Ga, REE, Ti, V). From anthropogenic wastes, waste electrical and electronic equipment (WEEE), among them LCD screens and fluorescent lamps, are clearly the most important from a metals recovery point of view. Metals that are commonly recovered from WEEE include, for example, Ag, Au, Cu, Pd and Pt. In LCD screens indium, and in fluorescent lamps, REEs, are possible target metals. Hydrometallurgical processing routes are highly suitable for the treatment of complex and/or low grade raw materials, as secondary raw materials often are. These solid or liquid raw materials often contain large amounts of base metals, for example. Thus, in order to recover valuable metals, with small concentrations, highly selective separation methods, such as hydrometallurgical routes, are needed. In addition, hydrometallurgical processes are also seen as more environmental friendly, and they have lower energy consumption, when compared to pyrometallurgical processes. In this thesis, solvent extraction and ion exchange are the most important hydrometallurgical separation methods studied. Solvent extraction is a mainstream unit operation in the metallurgical industry for all kinds of metals, but for ion exchange, practical applications are not as widespread. However, ion exchange is known to be particularly suitable for dilute feed solutions and complex separation tasks, which makes it a viable option, especially for processing secondary raw materials. Recovering valuable metals was studied with five different raw materials, which included liquid and solid side streams from metallurgical industries and WEEE. Recovery of high purity (99.7%) In, from LCD screens, was achieved by leaching with H2SO4, extracting In and Sn to D2EHPA, and selectively stripping In to HCl. In was also concentrated in the solvent extraction stage from 44 mg/L to 6.5 g/L. Ge was recovered as a side product from two different base metal process liquors with Nmethylglucamine functional chelating ion exchange resin (IRA-743). Based on equilibrium and dynamic modeling, a mechanism for this moderately complex adsorption process was suggested. Eu and Y were leached with high yields (91 and 83%) by 2 M H2SO4 from a fluorescent lamp precipitate of waste treatment plant. The waste also contained significant amounts of other REEs such as Gd and Tb, but these were not leached with common mineral acids in ambient conditions. Zn was selectively leached over Fe from steelmaking dusts with a controlled acidic leaching method, in which the pH did not go below, but was held close as possible to, 3. Mo was also present in the other studied dust, and was leached with pure water more effectively than with the acidic methods. Good yield and selectivity in the solvent extraction of Zn was achieved by D2EHPA. However, Fe needs to be eliminated in advance, either by the controlled leaching method or, for example, by precipitation. 100% Pure Mo/Cr product was achieved with quaternary ammonium salt (Aliquat 336) directly from the water leachate, without pH adjustment (pH 13.7). A Mo/Cr mixture was also obtained from H2SO4 leachates with hydroxyoxime LIX 84-I and trioctylamine (TOA), but the purities were 70% at most. However with Aliquat 336, again an over 99% pure mixture was obtained. High selectivity for Mo over Cr was not achieved with any of the studied reagents. Ag-NaCl solution was purified from divalent impurity metals by aminomethylphosphonium functional Lewatit TP-260 ion exchange resin. A novel preconditioning method, named controlled partial neutralization, with conjugate bases of weak organic acids, was used to control the pH in the column to avoid capacity losses or precipitations. Counter-current SMB was shown to be a better process configuration than either batch column operation or the cross-current operation conventionally used in the metallurgical industry. The raw materials used in this thesis were also evaluated from an economic point of view, and the precipitate from a waste fluorescent lamp treatment process was clearly shown to be the most promising.

Dual light barrier method for six degrees of freedom tool center point calibration of an industrial robot

Tool center point calibration is a known problem in industrial robotics. The major focus of academic research is to enhance the accuracy and repeatability of next generation robots. However, operators of currently available robots are working within the limits of the robot´s repeatability and require calibration methods suitable for these basic applications. This study was conducted in association with Stresstech Oy, which provides solutions for manufacturing quality control. Their sensor, based on the Barkhausen noise effect, requires accurate positioning. The accuracy requirement admits a tool center point calibration problem if measurements are executed with an industrial robot. Multiple possibilities are available in the market for automatic tool center point calibration. Manufacturers provide customized calibrators to most robot types and tools. With the handmade sensors and multiple robot types that Stresstech uses, this would require great deal of labor. This thesis introduces a calibration method that is suitable for all robots which have two digital input ports free. It functions with the traditional method of using a light barrier to detect the tool in the robot coordinate system. However, this method utilizes two parallel light barriers to simultaneously measure and detect the center axis of the tool. Rotations about two axes are defined with the center axis. The last rotation about the Z-axis is calculated for tools that have different width of X- and Y-axes. The results indicate that this method is suitable for calibrating the geometric tool center point of a Barkhausen noise sensor. In the repeatability tests, a standard deviation inside robot repeatability was acquired. The Barkhausen noise signal was also evaluated after recalibration and the results indicate correct calibration. However, future studies should be conducted using a more accurate manipulator, since the method employs the robot itself as a measuring device.

Performance improvement in mediterranean operations using risk management analysis : Case study of Containerships Group Ltd

Emerging markets of Northern Africa and Turkey provide growth opportunities for logistics service companies in the middle of low growth environment of European Union. The purpose of this research is to explore and analyze the risk factors in container shipping industry and third party logistics (3PL) services. The research empirically examined the risk factors, which are related within the interaction between these two parties in emerging markets of Mediterranean area. The previous studies have provided a valuable insight into the operational risks faced by container shipping industries. However, most of these studies have focused on one or several operational risk factors from a single point of view, and no studies have inclusively examined the possible operational risks faced in the container shipping industry from dual perspective of 3PL provider and its customers. A questionnaire has been deployed to collect related data; and the impacts of the risks were then be assessed and ranked using the method of risk mapping. Respondents were located in Turkey, Algeria, Tunisia, and Libya. Research presents the most important risk factors identified, and compares them between 3PL provider and its customers. The research also provide some risk mitigation strategies for the key risk factors, and tried to figure out a common risk picture, which guides the managers in both sides to have a better decisions and as a result, improve the performance of the container shipping operations. Challenge during project execution time was that customers identified vast amount of more risks than what was the case with logistics service operator.

In Search for the European solidarity: The rule of law within the European Union in the framework of constitutional pluralism

The dissertation examines the rule of law within the European Union in the theoretical framework of constitutional pluralism. The leading lines of constitutional pluralism are examined with relation to the traditional and prevailing, monistic and hierarchical conceptions on how to perceive legal orders in Europe. The theoretical part offers also historical perspective by highlighting some of the turning points for the Union constitutional legal order in the framework of European integration. The concept of rule of law is examined in legal terms and its meaning to the Union constitutional constellation as a constitutional principle and a common value is observed. The realization of the rule of law at supranational and national level is explored with a view to discover that recent developments in some of the Member States give rise to concern about the viability of the rule of law within the European Union. It is recognized that the inobservance of the rule of law at national level causes a threat to the supranational constitutional legal order. The relationship between the supranational and national legal orders is significant in this respect and therefore particularly the interaction between the Court of Justice of the European Union (hereinafter the ECJ) and the Member States’ (constitutional/supreme) courts takes focus. It is observed that functioning dialogue between the supranational and national courts based on mutual respect and judicial deference is an important prerequisite for the realization of the rule of law within Europe. In order to afford a concrete example, a recent case C-62/14 Gauweiler v Deutscher Bundestag is introduced and analysed in relation to the notorious relationship between the Federal Constitutional Court of Germany and the ECJ. The implications of the ECJ’s decision in Gauweiler v Deutscher Bundestag is assessed with reference to some of the pressing issues of constitutionalism within Europe and some institutional aspects are also brought forward. Lastly, the feasibility of constitutional pluralism as a theoretical setting is measured against the legal reality of today’s Europe and its many constitutions. The hierarchical idea of one ultimate source of power, stemming from the traditional approaches to legal systems, is then assessed with relation to the requirement of the realization of the rule of law within the European Union from the supranational and national point of view.