Koivupintaisen havuvanerin kustannustehokkuuden parantaminen

Metsäteollisuuden kiristyvä kilpailutilanne ja globalisoituminen ajavat metsäteollisuusyritykset uuteen tilanteeseen. Säästöä ja tehokkuutta pyritään hakemaan kaikin keinoin ja kaikesta toiminnasta. Samalla kehitetään uusia liiketoimintamuotoja tukemaan jo olemassa olevia ja korvaamaan vanhentuneita. Uuden tuotteen lanseeraus ei aina käy kivuttomasti, eikä elinkaarensa alkuvaiheessa tuotteen valmistaminen välttämättä tuota toivottua taloudellista tulosta. Verrattain uuden vanerituotteen kustannustehokkuuden parantamisen tarve havaittiin myös kohdeyrityksessä. Kirjallisuuden perusteella selvitettiin kohdeyrityksen tilanteeseen soveltuvia menetelmiä tietyn vanerituotteen valmistuskustannusten alentamiseksi. Tavoitekustannuslaskenta, Kaizen-laskenta ja jatkuvan parantamisen periaatteet ovat yleisesti tunnettuja menetelmiä tuotteen valmistuskustannusten hallitsemiseen. Näitä menetelmiä sovellettiin työssä kohdeyrityksen tarpeen mukaisiksi, tavoitteena tietyn vanerituotteen valmistuskustannusten alentaminen. Aluksi paikallistettiin tuotteen kustannusten muodostuminen ja suurimmat kustannuksia aiheuttavat tekijät. Selvityksen pohjalta määritettiin konkreettisia kustannustehokkuutta parantavia toimenpiteitä. Raaka-aineen kulutuksen vähentäminen ja tuoterakenteiden optimointi havaittiin teoreettisten laskelmien perusteella tehokkaimmiksi valmistuskustannusten alentamiskeinoiksi.

Costs and Benefits of a Shared Digital Long-Term Preservation System

Paper presented at the 40th Annual Conference of LIBER (Ligue des Bibliothèques Européennes de Recherche - Association of European Research Libraries) on July 1st, 2011; with the slides used at the presentation.

Costs and Benefits of a Shared Digital Long-Term Preservation System

This paper describes the cost-benefit analysis of digital long-term preservation (LTP) that was carried out in the context of the Finnish National Digital Library Project (NDL) in 2010. The analysis was based on the assumption that as many as 200 archives, libraries, and museums will share an LTP system. The term ‘system’ shall be understood as encompassing not only information technology, but also human resources, organizational structures, policies and funding mechanisms. The cost analysis shows that an LTP system will incur, over the first 12 years, cumulative costs of €42 million, i.e. an average of €3.5 million per annum. Human resources and investments in information technology are the major cost factors. After the initial stages, the analysis predicts annual costs of circa €4 million. The analysis compared scenarios with and without a shared LTP system. The results indicate that a shared system will have remarkable benefits. At the development and implementation stages, a shared system shows an advantage of €30 million against the alternative scenario consisting of five independent LTP solutions. During the later stages, the advantage is estimated at €10 million per annum. The cumulative cost benefit over the first 12 years would amount to circa €100 million.

Generic Life Cycle Cost Model and Cost-effective Solutions

Life cycle costing (LCC) practices are spreading from military and construction sectors to wider area of industries. Suppliers as well as customers are demanding comprehensive cost knowledge that includes all relevant cost elements through the life cycle of products. The problem of total cost visibility is being acknowledged and the performance of suppliers is evaluated not just by low acquisition costs of their products, but by total value provided through the life time of their offerings. The main purpose of this thesis is to provide better understanding of product cost structure to the case company. Moreover, comprehensive theoretical body serves as a guideline or methodology for further LCC process. Research includes the constructive analysis of LCC related concepts and features as well as overview of life cycle support services in manufacturing industry. The case study aims to review the existing LCC practices within the case company and provide suggestions for improvements. It includes identification of most relevant life cycle cost elements, development of cost breakdown structure and generic cost model for data collection. Moreover, certain cost-effective suggestions are provided as well. This research should support decision making processes, assessment of economic viability of products, financial planning, sales and other processes within the case company.

Effects of a Financial Transaction Tax - Do Transaction Costs Lower Volatility?: A Literature Review

In this literature review the theorethical framework of Financial transaction taxes and their assumed effect on market volatility is assessed. The empirical evidence from various studies is compared against the theory and a simple empirical review of the Finnish stock market is conducted. The findings implicate that financial transaction taxes can not reduce volatility and their actual effect on markets is dependend by many other factors as well. Some evidence even suggests that transactions taxes may actually raise volatility.

Harmonization of Environmental Costs and Investments Reporting

The objective of this Master’s Thesis is to examine the current state of environmental costs and investments reporting at Stora Enso in the Business Area of Printing and Reading. Differences and the factors causing the differences in environmental costs and investments reporting are examined in order to further harmonize the reporting between the mills. Research method is a case study, which comprises 11 paper mills. Environmental costs are studied from year 2012 and environmental investments from year 2011 or from 2012 depending on the mill. The results show that there are two types of differences such as actual and harmonisable affecting to environmental costs reporting. Actual differences result from factors such as location and technical features of the mill. Harmonisable differences represent differences, which distort the actual differences. Factors that cause harmonisable differences are identification and traceability of environmental costs as well as interpretation of the instructions. Estimation of the environmental share of indirect environmental investments causes differences between the mills in environmental investments reporting, as it has to be done case-by-case judgments. A further research could consider a detailed examination of the data registering process in order to further improve traceability of environmental costs. Furthermore, identification and reporting of potential savings could be studied from environmental point of view as resource efficiency is an increasing interest.

Supply network risks and costs in Finnish project business

This report summarizes the results of the survey HAVERI – Supply network risks in business. The survey was conducted in Finland during the spring and summer of year 2013. The survey is part of a large two-year research project started in June 2012 in Finland (on-going 06/2012–07/2014). The project is launched and financed by TEKES, the Finnish Funding Agency for Technology and Innovation, and executed together with the researchers from Lappeenranta University of Technology and Tampere University of Technology. The overall goal of this on-going research project is to find out the decision-making practices in the project-oriented companies in their purchasing decisions especially in the mechanical engineering and construction industries in Finland. The objective of the survey was to gain cross-sectional data concerning the challenges, risks and cost factors in Finnish project business companies. The results show that Finnish companies rely on their experience and supplier references in their risk management. In general, the understanding of the total cost structure varies among the industries and companies. The main cost factor in risk management was costs before the actual purchase decision. Overall, it seems that the monetary value of the whole project and capability of purchasing personnel are the main influencing factors on risk management activity in project purchasing.

ERP Systems as Investments: Analysing Costs vs. Benefits

An ERP system investment analysis method using a Fuzzy Pay-Off approach for Real Option valuation is examined. It is studied, how the investment can be incrementally adopted and analyzed as a compounding Real Option model. The modeling allows follow-up. IS system development model COCOMO is presented as an example for investment analysis. The thesis presents the usage of Real Options as an alternative for the valuation of an investment. An idea is presented to use a continuous investment follow-up during the investment. This analysis can be performed using Real Options. As a tool for the analysis, the Fuzzy Pay-Off method is presented as an alternative for investment valuation.

Comparative lifecycle assessment on organic and conventional carrots – case: Carrots from South-Savo and imported carrots from Italy

Organic farming is perceived to be an environmental friendly method of food production, thus assumed to be an alternative means of minimizing food-based environmental footprints. However, lower yield and unproductive years in organic crop rotation raise questions of whether it is really an environmentally friendly farming practice. Thus, the aim of this thesis was to examine the carbon footprint and energy demands of organic carrots cultivated and sold in South-Savo, Finland and compare them with those of local and imported conventional carrots using lifecycle assessment (LCA) as a method. From the investigation, it was found that organic carrots produced in South-Savo have the lowest GHG emissions and energy demand. The GHG emissions of local organic, local conventional and imported conventional carrots were found to be 4g CO2 eq. kgcarrots-1, 142g CO2 eq. kgcarrots-1 and 280 g CO2 eq. kgcarrots-1, respectively. On the other hand, energy demand for those carrots was found to be 1,33 MJ, 1,88 MJ and 3,68 MJ kgcarrots-1. Furthermore, it was also found that local organic carrots would have approximately similar GHG emissions as conventional counterpart if soil carbon stock change was excluded from the study.

The requirements and needs of global data usage in product lifecycle management

This study was done for ABB Ltd. Motors and Generators business unit in Helsinki. In this study, global data movement in large businesses is examined from a product data management (PDM) and enterprise resource planning (ERP) point-of-view. The purpose of this study was to understand and map out how a large global business handles its data in a multiple site structure and how it can be applied in practice. This was done by doing an empirical interview study on five different global businesses with design locations in multiple countries. Their master data management (MDM) solutions were inspected and analyzed to understand which solution would best benefit a large global architecture with many design locations. One working solution is a transactional hub which negates the effects of multisite transfers and reduces lead times. Also, the requirements and limitations of the current MDM architecture were analyzed and possible reform ideas given.  

Customer´s perceptions of value during the lifecycle of concentrate filtration

The objective of this study was to examine how customers purchase complex industrial solutions in mining industry, and what kind of value they perceive during different phases of the solution life cycle. In addition, a systematic method for understanding customer value was developed, which can be applied for other company’s offerings as well. The method includes step-by-step instructions for 1) the collection of customer value data and 2) implementation of the findings. The theoretical part of the study focuses on solution and customer value literature in business-to-business markets. In this study qualitative embedded multiple-case study was used as a research method. The primary data was collected through in-depth interviews in two market areas and by participating in customer meetings as an external observer. The results show that there are two ways of buying solutions that needs to be treated individually. Customers prefer to buy solutions from engineering companies as they think that suppliers still need to work on their solution capabilities. Therefore, Outotec should focus more on marketing itself as a solution provider. Customers buy solutions that create the most value with the lowest risk and they need to be supported throughout the solution lifecycle. References that demonstrate previous experience are the most effective way to reduce customers’ risk. However, the customer-perceived values and challenges differ between the market areas, and thus, suppliers should have divergent strategies for specific market areas.

Threat modeling a factory environment using Microsoft Security Development Lifecycle methodology

The number of security violations is increasing and a security breach could have irreversible impacts to business. There are several ways to improve organization security, but some of them may be difficult to comprehend. This thesis demystifies threat modeling as part of secure system development. Threat modeling enables developers to reveal previously undetected security issues from computer systems. It offers a structured approach for organizations to find and address threats against vulnerabilities. When implemented correctly threat modeling will reduce the amount of defects and malicious attempts against the target environment. In this thesis Microsoft Security Development Lifecycle (SDL) is introduced as an effective methodology for reducing defects in the target system. SDL is traditionally meant to be used in software development, principles can be however partially adapted to IT-infrastructure development. Microsoft threat modeling methodology is an important part of SDL and it is utilized in this thesis to find threats from the Acme Corporation’s factory environment. Acme Corporation is used as a pseudonym for a company providing high-technology consumer electronics. Target for threat modeling is the IT-infrastructure of factory’s manufacturing execution system. Microsoft threat modeling methodology utilizes STRIDE –mnemonic and data flow diagrams to find threats. Threat modeling in this thesis returned results that were important for the organization. Acme Corporation now has more comprehensive understanding concerning IT-infrastructure of the manufacturing execution system. On top of vulnerability related results threat modeling provided coherent views of the target system. Subject matter experts from different areas can now agree upon functions and dependencies of the target system. Threat modeling was recognized as a useful activity for improving security.

Omnibus accounts to Finnish investors? – An analysis of the costs and benefits that omnibus account structure brings to Finnish account operators and investors

The Finnish Securities Markets are being harmonized to enable better, more reliable and timely settlement of securities. Omnibus accounts are a common practice in the European securities markets. Finland forbids the use of omnibus accounts from its domestic investors. There is a possibility that the omnibus account usage is allowed for Finnish investors in the future. This study aims to build a comprehensive image to Finnish investors and account operators in determining the costs and benefits that the omnibus account structure would have for them. This study uses qualitative research methods. A literature review provides the framework for this study. Different kinds of research articles, regulatory documents, studies performed by European organisations, and Finnish news reportages are used to analyse the costs and benefits of omnibus accounts. The viewpoint is strictly of account operators and investors, and different effects on them are contemplated. The results of the analysis show that there are a number of costs and benefits that investors and account operators must take into consideration regarding omnibus accounts. The costs are related to development of IT-systems so that participants are able to adapt to the new structure and operate according to its needs. Decrease in the holdings’ transparency is a disadvantage of the structure and needs to be assessed precisely to avoid some problems it might bring. Benefits are mostly related to the increased competition in the securities markets as well as to the possible cost reductions of securities settlement. The costs and benefits were analysed according to the study plan of this thesis and as a result, the significance and impact of omnibus accounts to Finnish investors and account operators depends on the competition level and the decisions that all market participants make when determining if the account structure is beneficial for their operations.