Field Sales Management Control: Towards a Multi-Level Theory

The purpose of this dissertation is to increase the understanding and knowledge of field sales management control systems (i.e. sales managers monitoring, directing, evaluating and rewarding activities) and their potential consequences on salespeople. This topic is important because research conducted in the past has indicated that the choice of control system type can on the other hand have desirable consequences, such as high levels of motivation and performance, and on the other hand leadto harmful unintended consequences, such as opportunistic or unethical behaviors. Despite the fact that marketing and sales management control systems have been under rigorous research for over two decades, it still is at a very early stage of development, and several inconsistencies can be found in the research results. This dissertation argues that these inconsistencies are mainly derived from misspecification of the level of analysis in the past research. These different levels of analysis (i.e. strategic, tactical, and operational levels) involve very different decision-making situations regarding the control and motivation of sales force, which should be taken into consideration when conceptualizing the control. Moreover, the study of salesperson consequences of a field sales management control system is actually a cross-level phenomenon, which means that at least two levels of analysis are simultaneously involved. The results of this dissertation confirm the need to re-conceptualize the field sales management control system concept. It provides empirical evidence for the assertion that control should be conceptualized with more details atthe tactical/operational level of analysis than at the strategic levelof analysis. Moreover, the results show that some controls are more efficiently communicated to field salespeople than others. It is proposed that this difference is due to different purposes of control; some controls aredesigned for influencing salespersons' behavior (aim at motivating) whereas some controls are designed to aid decision-making (aim at providing information). According to the empirical results of this dissertation, the both types of controls have an impact to the sales force, but this impactis not as strong as expected. The results obtained in this dissertation shed some light to the nature of field sales management control systems, and their consequences on salespeopl

Organisaation strateginen kyvykkyys uudistumiseen

Tämän Pro Gradun tavoitteena oli selvittää organisaation strategisen kyvykkyyden merkitys organisaation uudistumiselle. Strateginen kyvykkyys käsitellään tässä työssä seuraavien strategisen johtamisen teorioiden kautta: toimialan taloustiede, resurssiperustainen näkemys, evoluutioteoria organisaation muutoksesta, tietoperustainen näkemys sekä dynaamisten kyvykkyyksien näkemys. Yrityksen uudistumiskyky ymmärretään tässä työssä yrityksen kyvyksi oppia ja kehittää uutta tietopääomaa sekä tuottaa uusia innovaatioita. Tutkimuksen empiirisen osan tarkoituksena oli selvittää case-yrityksen strategisen kyvykkyyden tämän hetkinen taso ja kuinka strategista kyvykkyyttä uudistumiseen voidaan mitata. Empiirinen tutkimus suoritettiin case-tutkimuksena ja siinä käytettiin kvantitatiivista ja kvalitatiivista tutkimusmenetelmää. Tutkimuksen lähestymistapa on kuvaileva, joten siinä ei ole asetettu tutkimushypoteeseja. Kvantitatiivinen osuus suoritettiin selainpohjaisena kyselynä. Kvalitatiivinen osuus suoritettiin teemahaastatteluin ja sen tarkoituksena oli syventää ymmärrystä caseyrityksen strategiseen kyvykkyyteen. Tämän tutkimuksen tärkein tulos oli havainto, että oppimisella ja uuden tiedon luonnilla on selvä yhteys yrityksen innovointiin ja uudistumiseen. Lisäksi havaittiin, että yrityksen ulkoisen toimintakentän ja asiakkaiden tarpeiden tuntemuksella on vaikutusta strategiseen kyvykkyyteen.

Terästuotteiden hinnaston uudistaminen

Työn tavoitteena oli uudistaa Rautaruukki Steelin terästuotteiden hinnasto päätuotteiden osalta. Rautaruukki Steelin päätuotteita ovat kuuma- ja kylmävalssatut, kuumasinkityt ja maalipinnoitetut Raahen ja Hämeenlinnan tehtaiden tuottamat terästuotteet. Ensin selvitettiin tuotantohyödykkeiden hinnoittelua ja eri hinnoittelumenetelmiä kirjallisuuden avulla. Tämän jälkeen selvitettiin hinnaston nykytilaa ja uudistetun hinnaston tavoitteita. Hinnaston uudistamisessa käytettiin apuna kilpailijaseurantaa kahden tärkeimmän kilpailijan osalta, paperiteollisuuden benchmarkingia sekä myyntihenkilöstön ja asiakkaiden haastatteluja. Lopuksi perehdyttiin tuotanto- ja kustannusrakenteeseen. Hinnaston uudistamisen taustalla ovat yrityksen strategia- ja teräsmarkkinoiden muutokset. Teräksen hinnoittelu voi olla nyt vapaampaa ja harmonisoiduista hinnastorakenteista ja yhtenevistä perushintaan perustuvista hinnoista voidaan siirtyä kohti Rautaruukin omia tuotanto- ja kustannusrakenteita vastaavaan hinnoitteluun. Hinnaston uudistuksella pyritään myös läpinäkyvyyden ja vertailtavuuden häivyttämiseen. Lisäksi taustalla on brandituotteiden aseman vahvistaminen ja kannattavuuden nostaminen. Perushintapohjaisesta hinnoittelusta kokonaan luopuminen kaatui suurimmaksi osaksi myyntihenkilöstön vastustukseen, jonka vuoksi hinnasto jaettiin kahteen osaan: standardituote- ja brandituotehinnastoihin. Standardituotteiden hinnoittelussa pitäydyttiin nykyisen kaltaisessa kilpailijasuuntautuneessa hinnoittelussa, kun taas brandituotteiden hinnoittelussa sovellettiin markkinalähtöistä efektiivihinnoittelua.

Tietämyksen hallinta ja tietopääoma liiketoiminnassa – case ABC-liikennemyymäläketju

Tässä tutkimuksessa tutkittiin tietämyksen hallintaa, tietopääomaa ja niiden ilmentymiä liiketoiminnassa. Tutkimuksen avulla pyrittiin selvittämään, pystytäänkö tutkimukseen valittujen mallien avulla määrittelemään S-ryhmään kuuluvan ABC-liikennemyymäläketjun liiketoiminnan kannalta oleellinen tietämyksen hallinta ja tietopääoma. Tutkimus toteutettiin case-tutkimuksena puolistrukturoiduilla teemahaastatteluilla. Haastatteluja tehtiin yhteensä 13 kappaletta. Analyysi, tulokset ja johtopäätökset perustuivat tutkimuksen tekijän omiin tulkintoihin, jotka perustuivat haastatteluista saatujen havaintojen vertailusta teoriaan ja muihin sivutietolähteisiin. Tutkimus osoitti, että tietämyksen hallinnan ja tietopääoman määrittely kyettiin tekemään, mutta lopputulos ei ollut lähtökohtamallin mukainen. Itse määrittelyprosessi ei ollut helppo toteuttaa, mikä johtui tietämyksen hallinnan ja tietopääoman eri osa-alueiden laajuudesta, päällekkäisyydestä, käsitteiden ja aihepiirin vieraudesta haastateltaville. Tutkimuksen oleellisin tulos oli se, että lähtökohtamalliin tehtiin muutoksia tietopääoman osa-alueelle: 1. aineettomaan varallisuuteen lisättiin ”organisaatio” ja poistettiin ”tekniset järjestelmät”, 2. organisaation osaamiseen lisättiin ”verkosto-osaaminen” ja 3. organisaation uudistumiskykyyn lisättiin ”operatiivinen kyvykkyys”. Keskeisin johtopäätös oli, että määritelläkseen liiketoiminnalle ominaisen tietämyksen hallinnan ja tietopääoman ilmentymät, tulee organisaation lähteä liikkeelle yhdestä mallista ja sopia yhteisistä käytettävistä käsitteistä. Organisaatiot ovat eri toimialoilta, joten kaikkia ilmentymiä ei välttämättä esiinny tai löytyy mallissa esiintymättömiä ilmentymiä. Tällöin tulee tehdä muutoksia lähtökohtakohtamalliin.

Kohti dynaamista organisaatioviestintää ja organisaatiota – teoreettinen synteesi

Tutkimuksen tarkoituksena on selvittää, mitä on dynaaminen organisaatio- viestintä, minkälaisesta maailmankuvasta se ponnistaa ja mitä yhtymä- kohtia sillä on tietojohtamisen kolmiulotteiseen organisaatiomalliin. Tutkimus on teoreettinen synteesi, jonka avulla on tarkoitus löytää myös käytännön menetelmiä, joilla voidaan tukea dynaamista organisaatio- viestintää, organisaation dynaamisuutta sekä itseuudistumista. Tutkimuksen teoreettisina lähtökohtina ovat Pekka Aulan dynaamisen organisaatioviestinnän teoria sekä pääasiassa Pirjo Ståhlen luoma kolmiulotteinen organisaatiomalli ja siihen liittyvä itseuudistuvien systeemien teoriaehdotus. Tutkimuksen käytännönläheisessä osassa analysoidaan suomalaisia organisaatioviestinnän oppikirjoja dynaamisen organisaatioviestinnän teorian valossa. Lopuksi muodostetaan malli, joka tukee dynaamista organisaatioviestintää ja organisaatiota. Tutkimus osoittaa, että useiden teoreetikoiden mielestä organisaatioiden pitäisi luopua vanhentuneista organisaatiorakenteistaan ja kehittää työympäristöjään nostamalla inhimilliset voimavarat ensisijaisiksi sekä keskittymällä työntekijöiden välisen vuorovaikutuksen, tiedon sekä informaation vaihtoon.

Concepts and Reference. Defending a Dual Theory of Natural Kind Concepts

In this thesis I argue that the psychological study of concepts and categorisation, and the philosophical study of reference are deeply intertwined. I propose that semantic intuitions are a variety of categorisation judgements, determined by concepts, and that because of this, concepts determine reference. I defend a dual theory of natural kind concepts, according to which natural kind concepts have distinct semantic cores and non-semantic identification procedures. Drawing on psychological essentialism, I suggest that the cores consist of externalistic placeholder essence beliefs. The identification procedures, in turn, consist of prototypes, sets of exemplars, or possibly also theory-structured beliefs. I argue that the dual theory is motivated both by experimental data and theoretical considerations. The thesis consists of three interrelated articles. Article I examines philosophical causal and description theories of natural kind term reference, and argues that they involve, or need to involve, certain psychological elements. I propose a unified theory of natural kind term reference, built on the psychology of concepts. Article II presents two semantic adaptations of psychological essentialism, one of which is a strict externalistic Kripkean-Putnamian theory, while the other is a hybrid account, according to which natural kind terms are ambiguous between internalistic and externalistic senses. We present two experiments, the results of which support the strict externalistic theory. Article III examines Fodor’s influential atomistic theory of concepts, according to which no psychological capacities associated with concepts constitute them, or are necessary for reference. I argue, contra Fodor, that the psychological mechanisms are necessary for reference.

Statistical Inversion Theory in X-ray Tomography

In this thesis the X-ray tomography is discussed from the Bayesian statistical viewpoint. The unknown parameters are assumed random variables and as opposite to traditional methods the solution is obtained as a large sample of the distribution of all possible solutions. As an introduction to tomography an inversion formula for Radon transform is presented on a plane. The vastly used filtered backprojection algorithm is derived. The traditional regularization methods are presented sufficiently to ground the Bayesian approach. The measurements are foton counts at the detector pixels. Thus the assumption of a Poisson distributed measurement error is justified. Often the error is assumed Gaussian, altough the electronic noise caused by the measurement device can change the error structure. The assumption of Gaussian measurement error is discussed. In the thesis the use of different prior distributions in X-ray tomography is discussed. Especially in severely ill-posed problems the use of a suitable prior is the main part of the whole solution process. In the empirical part the presented prior distributions are tested using simulated measurements. The effect of different prior distributions produce are shown in the empirical part of the thesis. The use of prior is shown obligatory in case of severely ill-posed problem.

The theory of classical Greek music

Luettelointi kesken

The theory and practice of just intonation

Luettelointi kesken

Role of references in international industrial marketing : a theory-building case study about supplier’s processes of utilizing references

Scientific studies regarding specifically references do not seem to exist. However, the utilization of references is an important practice for many companies involved in industrial marketing. The purpose of the study is to increase the understanding about the utilization of references in international industrial marketing in order to contribute to the development of a theory of reference behavior. Specifically, the modes of reference usage in industry, the factors affecting a supplier's reference behavior, and the question how references are actually utilized, are explored in the study. Due to the explorative nature of the study, a research design was followed where theory and empirical studies alternated. An Exploratory Framework was developed to guide a pilot case study that resulted in Framework 1. Results of the pilot study guided an expanded literature review that was used to develop first a Structural Framework and a Process Framework which were combined in Framework 2. Then, the second empirical phase of the case study was conducted in the same (pilot) case company. In this phase, Decision Systems Analysis (DSA) was used as the analysis method. The DSA procedure consists of three interviewing waves: initial interviews, reinterviews, and validating interviews. Four reference decision processes were identified, described and analyzed in the form of flowchart descriptions. The flowchart descriptions were used to explore new constructs and to develop new propositions to develop Framework 2 further. The quality of the study was ascertained by many actions in both empirical parts of the study. The construct validity of the study was ascertained by using multiple sources of evidence and by asking the key informant to review the pilot case report. The DSA method itself includes procedures assuring validity. Because of the choice to conduct a single case study, external validity was not even pursued. High reliability was pursued through detailed documentation and thorough reporting of evidence. It was concluded that the core of the concept of reference is a customer relationship regardless of the concrete forms a reference might take in its utilization. Depending on various contingencies, references might have various tasks inside the four roles of increasing 1) efficiency of sales and sales management, 2) efficiency of the business, 3) effectiveness of marketing activities, and 4) effectiveness in establishing, maintaining and enhancing customer relationships. Thus, references have not only external but internal tasks as well. A supplier's reference behavior might be affected by many hierarchical conditions. Additionally, the empirical study showed that the supplier can utilize its references as a continuous, all pervasive decision making process through various practices. The process includes both individual and unstructured decision making subprocesses. The proposed concept of reference can be used to guide a reference policy recommendable for companies for which the utilization of references is important. The significance of the study is threefold: proposing the concept of reference, developing a framework of a supplier's reference behavior and its short term process of utilizing references, and conceptual structuring of an unstructured and in industrial marketing important phenomenon to four roles.

Hybrid LC Filter for Power Electronic Drives: Theory and Implementation

Power electronic converter drives use, for the sake of high efficiency, pulse-width modulation that results in sequences of high-voltage high-frequency steep-edged pulses. Such a signal contains a set of high harmonics not required for control purposes. Harmonics cause reflections in the cable between the motor and the inverter leading to faster winding insulation ageing. Bearing failures and problems with electromagnetic compatibility may also result. Electrical du/dt filters provide an effective solution to problems caused by pulse-width modulation, thereby increasing the performance and service life of the electrical machines. It is shown that RLC filters effectively decrease the reflection phenomena in the cable. Improved (simple, but effective) solutions are found for both differential- and common-mode signals; these solutions use a galvanic connection between the RLC filter star point and the converter DC link. Foil chokes and film capacitors are among the most widely used components in high-power applications. In actual applications they can be placed in different parts of the cabinet. This fact complicates the arrangement of the cabinet and decreases the reliability of the system. In addition, the inductances of connection wires may prevent filtration at high frequencies. This thesis introduces a new hybrid LC filter that uses a natural capacitance between the turns of the foil choke based on integration of an auxiliary layer into it. The main idea of the hybrid LC filter results from the fact that both the foil choke and the film capacitors have the same roll structure. Moreover, the capacitance between the turns (“intra capacitance”) of the foil inductors is the reason for the deterioration of their properties at high frequencies. It is shown that the proposed filter has a natural cancellation of the intra capacitance. A hybrid LC filter may contain two or more foil layers isolated from each other and coiled on a core. The core material can be iron or even air as in the filter considered in this work. One of the foils, called the main foil, can be placed between the inverter and the motor cable. Other ones, called auxiliary foils, may be connected in star to create differential-mode noise paths, and then coupled to the DC link midpoint to guarantee a traveling path, especially for the common-mode currents. This way, there is a remarkable capacitance between the main foil and the auxiliary foil. Investigations showed that such a system can be described by a simple equivalent LC filter in a wide range of frequencies. Because of its simple hybrid construction, the proposed LC filter can be a cost-effective and competitive solution for modern power drives. In the thesis, the application field of the proposed filter is considered and determined. The basics of hybrid LC filter design are developed further. High-frequency behaviour of the proposed filter is analysed by simulations. Finally, the thesis presents experimental data proving that the hybrid LC filter can be used for du/dt of PWM pulses and reduction of common-mode currents.

On the Application of Beam on Elastic Foundation Theory to the Analysis of Stiffened Plate Strips

The main objective of this thesis is to show that plate strips subjected to transverse line loads can be analysed by using the beam on elastic foundation (BEF) approach. It is shown that the elastic behaviour of both the centre line section of a semi infinite plate supported along two edges, and the free edge of a cantilever plate strip can be accurately predicted by calculations based on the two parameter BEF theory. The transverse bending stiffness of the plate strip forms the foundation. The foundation modulus is shown, mathematically and physically, to be the zero order term of the fourth order differential equation governing the behaviour of BEF, whereas the torsion rigidity of the plate acts like pre tension in the second order term. Direct equivalence is obtained for harmonic line loading by comparing the differential equations of Levy's method (a simply supported plate) with the BEF method. By equating the second and zero order terms of the semi infinite BEF model for each harmonic component, two parameters are obtained for a simply supported plate of width B: the characteristic length, 1/ λ, and the normalized sum, n, being the effect of axial loading and stiffening resulting from the torsion stiffness, nlin. This procedure gives the following result for the first mode when a uniaxial stress field was assumed (ν = 0): 1/λ = √2B/π and nlin = 1. For constant line loading, which is the superimposition of harmonic components, slightly differing foundation parameters are obtained when the maximum deflection and bending moment values of the theoretical plate, with v = 0, and BEF analysis solutions are equated: 1 /λ= 1.47B/π and nlin. = 0.59 for a simply supported plate; and 1/λ = 0.99B/π and nlin = 0.25 for a fixed plate. The BEF parameters of the plate strip with a free edge are determined based solely on finite element analysis (FEA) results: 1/λ = 1.29B/π and nlin. = 0.65, where B is the double width of the cantilever plate strip. The stress biaxial, v > 0, is shown not to affect the values of the BEF parameters significantly the result of the geometric nonlinearity caused by in plane, axial and biaxial loading is studied theoretically by comparing the differential equations of Levy's method with the BEF approach. The BEF model is generalised to take into account the elastic rotation stiffness of the longitudinal edges. Finally, formulae are presented that take into account the effect of Poisson's ratio, and geometric non linearity, on bending behaviour resulting from axial and transverse inplane loading. It is also shown that the BEF parameters of the semi infinite model are valid for linear elastic analysis of a plate strip of finite length. The BEF model was verified by applying it to the analysis of bending stresses caused by misalignments in a laboratory test panel. In summary, it can be concluded that the advantages of the BEF theory are that it is a simple tool, and that it is accurate enough for specific stress analysis of semi infinite and finite plate bending problems.