Means and challenges in international operations for a Finnish mobile application provider

Master’s Thesis concentrates to means and challenges in international operations for a Finnish mobile application provider Small Planet Oy during its various company stages from founding till maturing and during macro economical phases between year 1998 and 2008. Small Planet has just celebrated its 10 year anniversary and is therefore quite an extraordinary company which has survived all the highs and lows during past ten years and which has operated in the market as long as the whole mobile application industry has existed. Master’s Thesis describes possibilities for a company’s internationalization with different entry modes like exporting, licensing, investment entry and co-operative operations which are suitable for a mobile application provider. Unsuitable entry modes like franchising or contract manufacturing are not explained. The goal has been to analyze Small Planet’s international operations and to make conclusions from the practical experiences. Analysis and conclusions shall help Small Planet in its international operations in the future and should give insight to other mobile application companies and their managers who are in the situation of planning their own international operations. Results show that the best ways for Small Planet to internationalize its operations has been the co-operation with a big domestic client and the co-operation with Finnish operator infrastructure providers which have complementary products with Small Planet. Through these co-operations Small Planet has got lot of new international clients. Same time financial risks and investment need for international operations have been low. Co-operative international sales can be the most efficient international entry mode for a mobile application provider.

Sales and Operations Planning Implementation

The master’s thesis focused on implementing a sales and operations planning process. The main objectives were to create planning methods and tools for the implementation. The ultimate goal of the process, beyond this master’s thesis, is to balance the supply of products with customer demand, with optimized profitability. The theoretical part focused on giving a thorough view on the sales and operations planning process. The basis for a monthly planning cycle was identified. Methods, tools, and metrics for demand forecasting and operations planning were also introduced. Based on the theoretical part, a method for forecasting, a forecast spreadsheet, and a forecast accuracy metric were designed. A spreadsheet tool and methods were also designed for the monthly planning of production volumes, capacity, and inventory. The implementation progress was reviewed for two product families for three months. The sales and operations planning process was able to successfully identify a demand peak for the product families. Suggestions for the future of sales and operations planning were also made.

RFID-teknologian hyödyntäminen puolustusvoimien yksilöseurattavan materiaalin hallinnassa - CASE: maavoimat, Karjalan Prikaati

RFID-teknologian käyttöönotto on vakaassa kasvussa ja kiinnostus tekniikan soveltami-seen on erityisesti yksilöseurannan alueella. Diplomityössä on tutkittu RFID -teknologian mahdollisuuksia puolustusvoimien normaaliolojen kriittisen yksilöseurattavan materiaalin hallintaan. Case-joukko-osastona tutkimuksessa on toiminut Karjalan Prikaati. Tutkimus-aihetta on tarkasteltu prosessiajattelun näkökulmasta, mutta myös tiedon keräämistä on käsitelty. RFID-pohjainen tieto eroaa perinteisellä tavalla kerätystä tiedosta. RFID-teknologian hyödyntäminen tarjoaa kuitenkin entistä monipuolisemman ja virheettö-mämmän tiedon keräämisen reaaliajassa, joten se tukee hyvin prosessimaista toimintaa. Tutkimuksen painopisteenä on ollut logistiikan resurssien käytön tehostaminen RFID-teknologiaan tukeutuvan prosessimaisen toiminnan kautta. Tehokas prosessimainen toi-minta soveltuu hyvin sotilasorganisaatioihin. Prosessien määrittely ja kuvaaminen autta-vat tunnistamaan niissä ilmeneviä ongelmia ja samalla kuvaamaan mahdollisten muutos-ten vaikutukset prosesseihin sekä organisaatioihin. Perusteet prosessien uudelleen suun-nittelulle lähtevät prosessimaisen toiminnan tunnistamisesta ja kuvaamisesta. Case-joukko-osaston nykytilan kartoituksessa havaittiin, että joukko-osastotasolta on tähän asti puuttunut kokonaisvaltainen prosessimainen toimintatapa. Nykytila-analyysin pohjalta tutkimustyössä rakennettiin yksilöseurattavan materiaalin käsittelyä kuvaava toimintaprosessi, joka muodostui kuudesta eri osaprosessista. Tutki-mustyölle valitun painopisteen mukaisesti osaprosesseista viisi liittyi logistiikkaan ja kun-nossapitoon yksi. Tämän jälkeen keskityttiin tutkiman RFID-tekniikan avulla saavutetta-via keskeisiä hyötyjä. RFID-teknologian ja prosessimaisen toiminnan avulla joukko-osastotasolla on saavutettavissa useita hyötyjä verrattuna nykytilan toimintaan. Uudessa toimintatavassa keskeisiä tunnistettuja hyötyjä ovat toiminnan automatisoituminen, teho-kas tiedonkeruu, toiminnan hyvä laatu ja tehokkuus. Toiminnan tehokkuutta organisaati-on logistisissa toiminnoissa on siis mahdollista kasvattaa ja samalla lisätä näkyvyyttä toimitusketjun sisälle ja sen eri vaiheisiin. Lisäksi RFID-teknologian käyttöönotolla pys-tytään tukemaan hyvin puolustusvoimien kunnossapidon strategista kumppanuutta.

The intrinsic mechanisms of softwood fiber damage in brown stock fiber line unit operations Lappeenranta 2010

The effects of pulp processing on softwood fiber properties strongly influence the properties of wet and dry paper webs. Pulp strength delivery studies have provided observations that much of the strength potential of long fibered pulp is lost during brown stock fiber line operations where the pulp is merely washed and transferred to the subsequent processing stages. The objective of this work was to study the intrinsic mechanisms which maycause fiber damage in the different unit operations of modern softwood brown stock processing. The work was conducted by studying the effects of industrial machinery on pulp properties with some actions of unit operations simulated in laboratory scale devices under controlled conditions. An optical imaging system was created and used to study the orientation of fibers in the internal flows during pulp fluidization in mixers and the passage of fibers through the screen openings during screening. The qualitative changes in fibers were evaluated with existing and standardized techniques. The results showed that each process stage has its characteristic effects on fiber properties: Pulp washing and mat formation in displacement washers introduced fiber deformations especially if the fibers entering the stage were intact, but it did not decrease the pulp strength properties. However, storage chests and pulp transfer after displacement washers contributed to strength deterioration. Pulp screening proved to be quite gentle, having the potential of slightly evening out fiber deformations from very deformed pulps and vice versa inflicting a marginal increase in the deformation indices if the fibers were previously intact. Pulp mixing in fluidizing industrial mixers did not have detrimental effects on pulp strength and had the potential of slightly evening out the deformations, provided that the intensity of fluidization was high enough to allow fiber orientation with the flow and that the time of mixing was short. The chemical and mechanical actions of oxygen delignification had two distinct effects on pulp properties: chemical treatment clearly reduced pulp strength with and without mechanical treatment, and the mechanical actions of process machinery introduced more conformability to pulp fibers, but did not clearly contribute to a further decrease in pulp strength. The chemical composition of fibers entering the oxygen stage was also found to affect the susceptibility of fibers to damage during oxygen delignification. Fibers with the smallest content of xylan were found to be more prone to irreversibledeformations accompanied with a lower tensile strength of the pulp. Fibers poor in glucomannan exhibited a lower fiber strength while wet after oxygen delignification as compared to the reference pulp. Pulps with the smallest lignin content on the other hand exhibited improved strength properties as compared to the references.

Quality and analysis of administration processes in server operations

IT outsourcing refers to the way companies focus on their core competencies and buy the supporting functions from other companies specialized in that area. Service is the total outcome of numerous of activities by employees and other resources to provide solutions to customers' problems. Outsourcing and service business have their unique characteristics. Service Level Agreements quantify the minimum acceptable service to the user. The service quality has to be objectively quantified so that its achievement or non-achievement of it can be monitored. Usually offshoring refers to the transferring of tasks to low-cost nations. Offshoring presents a lot of challenges that require special attention and they need to be assessed thoroughly. IT Infrastructure management refers to installation and basic usability assistance of operating systems, network and server tools and utilities. ITIL defines the industry best practices for organizing IT processes. This thesis did an analysis of server operations service and the customers’ perception of the quality of daily operations. The agreed workflows and processes should be followed better. Service providers’ processes are thoroughly defined but both the customer and the service provider might disobey them. Service provider should review the workflows regarding customer functions. Customer facing functions require persistent skill development, as they communicate the quality to the customer. Service provider needs to provide better organized communication and knowledge exchange methods between the specialists in different geographical locations.

Study of mesoscopic tunnel junctions between two normal metals

The main purpose of this work was to study different kinds of metal-based tunnel junctions at low temperatures. The problem which had to be solved was creating a junction with appropriate properties at these temperatures. The materials for junctions were found experimentally. The goal was to find an alloy material that can provide a high quality tunnel junction, which remains in the normal conductive state at low temperatures without applying magnetic field. The fabrication technology of such a device, based on an alloy of aluminium and manganese, is described in detail. In this thesis theoretical properties of tunnel junctions are considered and results of experiments with tunnel junctions are described and quantitative properties of the junctions are analyzed based on the experimental data.

Työntömastotrukkien tuotannon optimointi

Tutkimuksessa luodaan Tuko Logistics Oy:n työntömastotrukkien toimintaa opti-moivia toimintaehdotuksia varastonohjausjärjestelmästä saatavan työntömastotruk-kidatan pohjalta. Tutkimus on toteutettu haastattelututkimuksena ja käyttäen apuna tieteellisiä julkaisuja. Tehtävien lomittamistutkimuksen ja loogiseen päättelyn tulok-sena on luotu kaksi toimintaehdotusta: A ja B. Toimintaehdotusten vaikutuksia van-haan järjestelmään verrataan mittareilla, joista osa on tehty jonoteorian jonomallien laskukaavojen pohjalta. Mittareita ovat: tehdyt tehtävät tunnissa, tuottamattoman ajon suhde tuottavaan, normaalitehtäväjonon pituus ja normaalitehtäväjonon koko-naisodotusaika. Toimintaehdotus B osoittautuu tehokkaammaksi ehdotukseksi, mutta Toimintaehdotus A:lla voi varmistaa tehtävien riittämisen työntömastotrukeille. Tut-kimuksessa ehdotetaan myös muita työntömastotrukkien toimintaa optimoivia muu-toksia, jotka voidaan ottaa käyttöön jokaisessa toimintamallissa.

Possibilities and challenges of longitudinal studies in operations management

Longitudinal studies are quite rare in the area of Operations Management. One reason might be the time needed to conduct such studies, and then the lack of experience and real-life examples and results. The aim of the thesis is to examine longitudinal studies in the area of OM and the possible advantages, challenges and pitfalls of such studies. A longitudinal benchmarking study, Made in Finland, was analyzed in terms of the study methodology and its outcomes. The timeline of this longitudinal study is interesting. The first study was made in 1993, the second in 2004 and the third in 2010. Between these studies some major changes occurred in the Finnish business environment. Between the first and second studies, Finland joined the ETA and the EU, and globalization started with the rise of the Internet era, while between the second and third studies financial turmoil started in 2007. The sample and cases used in this study were originally 23 manufacturing sites in Finland. These sites were interviewed in 1993, in 2004 and 2010. One important and interesting aspect is that all the original sites participated in 2004, and 19 sites were still able to participate in 2010. Four sites had been closed and/or moved abroad. All of this gave a good opportunity to study the changes that occurred in the Finnish manufacturing sites and their environment, and how they reacted to these changes, and the effects on their performance. It is very seldom, if ever, that the same manufacturing sites have been studied in a longitudinal setting by using three data points. The results of this study are thus unique, and the experience gained is valuable for practitioners.

Streamlining Launch Support Operations in a Product Platform

The new product development process is a massive investment to a company that aims to reduce their products’ time-to-market. Capability to shorter time-to market allows longer life-cycle to products which are introduced to market earlier but also give advantage to start product launch later while simultaneously learning from customer behavior and competitors. The product launch support operations are the last ramp-up activities before the product launching. This study defines what these operations mean in a product platform and how they can be streamlined to be more efficient. The methodology includes interviews, innovative group brainstorming and regular working group meetings. The challenges concerning the current situation of product launch support operations are allocated into four categories: General, Process, Project Resources and Project Management including altogether ten sub challenges. The challenges include issues related to technology and marketing management, branding strategy, organizing the global platform structure, harmonizing processes and clarifying handovers between shareholders in the process. The study makes a suggestion of a new Product Launch Support organization and clarification of its roles, responsibilities and tasks. In addition a new project management tool and Lessons Learned are suggested to improve the project management. The study can be seen as a pre-study when having an aim at combining technological and marketing know-how in the product ramp-up process before actual production. The future proceedings are suggested to include more detailed specifications and implementation in order to reach the long range target, reduced the time-to-market.

Hazard Risk Management in Large Nordic Companies' Operations in Russia

The objective of this research was to describe how Nordic companies manage hazard risks in their operations in Russia and how the local business environment is considered to affect the hazard risks. Research methods used in this research were literature review and expert interviews. Twelve Nordic industrial companies operating in different fields of industry were interviewed. Large Nordic companies typically guide risk management centralized from the parent company on behalf of the whole company group and the risk management standards and policies are integrated in all subsidiaries. Parent companies typically control hazard risk management in Russia by regular risk management reporting, auditing the Russian sites and by training local managers and employees to risk management work. Many companies have experienced several losses in the first years of operating in Russia before the risk management policies have been implemented in Russian subsidiaries. The companies have learned to take local characteristics better into account by experience and most companies are quite satisfied with their current risk management standards in Russia. The interviews indicate that companies experience especially the poor quality of infrastructure, some features in Russian organizational culture and high level of criminality to increase hazard risks in Russia. However, understanding these features and risks in the business environment makes the management of these risks possible. Risks related to infrastructure can be managed in advance by decreasing dependencies of infrastructure and considering the infrastructure quality already when planning the business operations. Also good local network is often considered critical in order to overcome the complications related to infrastructure. Russian personnel has typically different attitude towards risk management than Nordic personnel and neglecting safety and maintenance and concealing losses is more typical in Russia. By training and guiding the local personnel risk management and safety work and desired ways of actions these risks can be decreased. Criminality risks are often managed to certain extent by investing in security, increasing supervising and paying attention to reliability of the employees and other interest groups of the company.

Normal Mannesmann-Mulag kardanvagn

kuv., 24 x 16 cm