Supply chain integration: studies on linking customer responsiveness and operational efficiency in logistics policy planning

Abstract The research problem in the thesis deals with improving the responsiveness and efficiency of logistics service processes between a supplier and its customers. The improvement can be sought by customizing the services and increasing the coordination of activities between the different parties in the supply chain. It is argued that to achieve coordination the parties have to have connections on several levels. In the framework employed in this research, three contexts are conceptualized at which the linkages can be planned: 1) the service policy context, 2) the process coordination context, and 3) the relationship management context. The service policy context consists of the planning methods by which a supplier analyzes its customers' logistics requirements and matches them with its own operational environment and efficiency requirements. The main conclusion related to the service policy context is that it is important to have a balanced selection of both customer-related and supplier-related factors in the analysis. This way, while the operational efficiency is planned a sufficient level of service for the most important customers is assured. This kind of policy planning involves taking multiple variables into the analysis, and there is a need to develop better tools for this purpose. Some new approaches to deal with this are presented in the thesis.The process coordination context and the relationship management context deal with the issues of how the implementation of the planned service policies can be facilitated in an inter-organizational environment. Process coordination includes typically such mechanisms as control rules, standard procedures and programs, but inhighly demanding circumstances more integrative coordination mechanisms may be necessary. In the thesis the coordination problems in third-party logistics relationship are used as an example of such an environment. Relationship management deals with issues of how separate companies organize their relationships to improve the coordination of their common processes. The main implication related to logistics planning is that by integrating further at the relationship level, companies can facilitate the use of the most efficient coordination mechanisms and thereby improve the implementation of the selected logistics service policies. In the thesis, a case of a logistics outsourcing relationship is used to demonstrate the need to address the relationship issues between the service provider andthe service buyer before the outsourcing can be done.The dissertation consists of eight research articles and a summarizing report. The principal emphasis in the articles is on the service policy planning context, which is the main theme of six articles. Coordination and relationship issues are specifically addressed in two of the papers.

Studies on integrating kinematic design method with mechanical systems simulation techniques

Theultimate goal of any research in the mechanism/kinematic/design area may be called predictive design, ie the optimisation of mechanism proportions in the design stage without requiring extensive life and wear testing. This is an ambitious goal and can be realised through development and refinement of numerical (computational) technology in order to facilitate the design analysis and optimisation of complex mechanisms, mechanical components and systems. As a part of the systematic design methodology this thesis concentrates on kinematic synthesis (kinematic design and analysis) methods in the mechanism synthesis process. The main task of kinematic design is to find all possible solutions in the form of structural parameters to accomplish the desired requirements of motion. Main formulations of kinematic design can be broadly divided to exact synthesis and approximate synthesis formulations. The exact synthesis formulation is based in solving n linear or nonlinear equations in n variables and the solutions for the problem areget by adopting closed form classical or modern algebraic solution methods or using numerical solution methods based on the polynomial continuation or homotopy. The approximate synthesis formulations is based on minimising the approximation error by direct optimisation The main drawbacks of exact synthesis formulationare: (ia) limitations of number of design specifications and (iia) failure in handling design constraints- especially inequality constraints. The main drawbacks of approximate synthesis formulations are: (ib) it is difficult to choose a proper initial linkage and (iib) it is hard to find more than one solution. Recentformulations in solving the approximate synthesis problem adopts polynomial continuation providing several solutions, but it can not handle inequality const-raints. Based on the practical design needs the mixed exact-approximate position synthesis with two exact and an unlimited number of approximate positions has also been developed. The solutions space is presented as a ground pivot map but thepole between the exact positions cannot be selected as a ground pivot. In this thesis the exact synthesis problem of planar mechanism is solved by generating all possible solutions for the optimisation process ¿ including solutions in positive dimensional solution sets - within inequality constraints of structural parameters. Through the literature research it is first shown that the algebraic and numerical solution methods ¿ used in the research area of computational kinematics ¿ are capable of solving non-parametric algebraic systems of n equations inn variables and cannot handle the singularities associated with positive-dimensional solution sets. In this thesis the problem of positive-dimensional solutionsets is solved adopting the main principles from mathematical research area of algebraic geometry in solving parametric ( in the mathematical sense that all parameter values are considered ¿ including the degenerate cases ¿ for which the system is solvable ) algebraic systems of n equations and at least n+1 variables.Adopting the developed solution method in solving the dyadic equations in direct polynomial form in two- to three-precision-points it has been algebraically proved and numerically demonstrated that the map of the ground pivots is ambiguousand that the singularities associated with positive-dimensional solution sets can be solved. The positive-dimensional solution sets associated with the poles might contain physically meaningful solutions in the form of optimal defectfree mechanisms. Traditionally the mechanism optimisation of hydraulically driven boommechanisms is done at early state of the design process. This will result in optimal component design rather than optimal system level design. Modern mechanismoptimisation at system level demands integration of kinematic design methods with mechanical system simulation techniques. In this thesis a new kinematic design method for hydraulically driven boom mechanism is developed and integrated in mechanical system simulation techniques. The developed kinematic design method is based on the combinations of two-precision-point formulation and on optimisation ( with mathematical programming techniques or adopting optimisation methods based on probability and statistics ) of substructures using calculated criteria from the system level response of multidegree-of-freedom mechanisms. Eg. by adopting the mixed exact-approximate position synthesis in direct optimisation (using mathematical programming techniques) with two exact positions and an unlimitednumber of approximate positions the drawbacks of (ia)-(iib) has been cancelled.The design principles of the developed method are based on the design-tree -approach of the mechanical systems and the design method ¿ in principle ¿ is capable of capturing the interrelationship between kinematic and dynamic synthesis simultaneously when the developed kinematic design method is integrated with the mechanical system simulation techniques.

Numerical and ExperimentalModelling of Gas Flow and Heat Transfer in the Air Gap of An Electric Machine

This work deals with the cooling of high-speed electric machines, such as motors and generators, through an air gap. It consists of numerical and experimental modelling of gas flow and heat transfer in an annular channel. Velocity and temperature profiles are modelled in the air gap of a high-speed testmachine. Local and mean heat transfer coefficients and total friction coefficients are attained for a smooth rotor-stator combination at a large velocity range. The aim is to solve the heat transfer numerically and experimentally. The FINFLO software, developed at Helsinki University of Technology, has been used in the flow solution, and the commercial IGG and Field view programs for the grid generation and post processing. The annular channel is discretized as a sector mesh. Calculation is performed with constant mass flow rate on six rotational speeds. The effect of turbulence is calculated using three turbulence models. The friction coefficient and velocity factor are attained via total friction power. The first part of experimental section consists of finding the proper sensors and calibrating them in a straight pipe. After preliminary tests, a RdF-sensor is glued on the walls of stator and rotor surfaces. Telemetry is needed to be able to measure the heat transfer coefficients at the rotor. The mean heat transfer coefficients are measured in a test machine on four cooling air mass flow rates at a wide Couette Reynolds number range. The calculated values concerning the friction and heat transfer coefficients are compared with measured and semi-empirical data. Heat is transferred from the hotter stator and rotor surfaces to the coolerair flow in the air gap, not from the rotor to the stator via the air gap, althought the stator temperature is lower than the rotor temperature. The calculatedfriction coefficients fits well with the semi-empirical equations and precedingmeasurements. On constant mass flow rate the rotor heat transfer coefficient attains a saturation point at a higher rotational speed, while the heat transfer coefficient of the stator grows uniformly. The magnitudes of the heat transfer coefficients are almost constant with different turbulence models. The calibrationof sensors in a straight pipe is only an advisory step in the selection process. Telemetry is tested in the pipe conditions and compared to the same measurements with a plain sensor. The magnitudes of the measured data and the data from the semi-empirical equation are higher for the heat transfer coefficients than thenumerical data considered on the velocity range. Friction and heat transfer coefficients are presented in a large velocity range in the report. The goals are reached acceptably using numerical and experimental research. The next challenge is to achieve results for grooved stator-rotor combinations. The work contains also results for an air gap with a grooved stator with 36 slots. The velocity field by the numerical method does not match in every respect the estimated flow mode. The absence of secondary Taylor vortices is evident when using time averagednumerical simulation.

Experimental and Numerical Analysis of Different Volutes in a Centrifugal Compressor

In a centrifugal compressor the flow around the diffuser is collected and led to the pipe system by a spiral-shaped volute. In this study a single-stage centrifugal compressor with three different volutes is investigated. The compressorwas first equipped with the original volute, the cross-section of which was a combination of a rectangle and semi-circle. Next a new volute with a fully circular cross-section was designed and manufactured. Finally, the circular volute wasmodified by rounding the tongue and smoothing the tongue area. The overall performance of the compressor as well as the static pressure distribution after the impeller and on the volute surface were measured. The flow entering the volute was measured using a three-hole Cobra-probe, and flow visualisations were carriedout in the exit cone of the volute. In addition, the radial force acting on theimpeller was measured using magnetic bearings. The complete compressor with thecircular volute (inlet pipe, full impeller, diffuser, volute and outlet pipe) was also modelled using computational fluid dynamics (CFD). A fully 3-D viscous flow was solved using a Navier-Stokes solver, Finflo, developed at Helsinki University of Technology. Chien's k-e model was used to take account of the turbulence. The differences observed in the performance of the different volutes were quite small. The biggest differences were at low speeds and high volume flows,i.e. when the flow entered the volute most radially. In this operating regime the efficiency of the compressor with the modified circular volute was about two percentage points higher than with the other volutes. Also, according to the Cobra-probe measurements and flow visualisations, the modified circular volute performed better than the other volutes in this operating area. The circumferential static pressure distribution in the volute showed increases at low flow, constant distribution at the design flow and decrease at high flow. The non-uniform static pressure distribution of the volute was transmitted backwards across the vaneless diffuser and observed at the impeller exit. At low volume flow a strong two-wave pattern developed into the static pressure distribution at the impeller exit due to the response of the impeller to the non-uniformity of pressure. The radial force of the impeller was the greatest at the choke limit, the smallest atthe design flow, and moderate at low flow. At low flow the force increase was quite mild, whereas the increase at high flow was rapid. Thus, the non-uniformityof pressure and the force related to it are strong especially at high flow. Theforce caused by the modified circular volute was weaker at choke and more symmetric as a function of the volume flow than the force caused by the other volutes.

Theoretical and numerical study of thermomagnetic convection in magnetic fluids

In this thesis, the magnetic field control of convection instabilities and heat and mass transfer processesin magnetic fluids have been investigated by numerical simulations and theoretical considerations. Simulation models based on finite element and finite volume methods have been developed. In addition to standard conservation equations, themagnetic field inside the simulation domain is calculated from Maxwell equations and the necessary terms to take into account for the magnetic body force and magnetic dissipation have been added to the equations governing the fluid motion.Numerical simulations of magnetic fluid convection near the threshold supportedexperimental observations qualitatively. Near the onset of convection the competitive action of thermal and concentration density gradients leads to mostly spatiotemporally chaotic convection with oscillatory and travelling wave regimes, previously observed in binary mixtures and nematic liquid crystals. In many applications of magnetic fluids, the heat and mass transfer processes including the effects of external magnetic fields are of great importance. In addition to magnetic fluids, the concepts and the simulation models used in this study may be applied also to the studies of convective instabilities in ordinary fluids as well as in other binary mixtures and complex fluids.

Selective catalytic reduction of nitrogen oxides with ammonia in forced unsteady state reactors - Case based reasoning and mathematical model simulation reasoning

The application of forced unsteady-state reactors in case of selective catalytic reduction of nitrogen oxides (NOx) with ammonia (NH3) is sustained by the fact that favorable temperature and composition distributions which cannot be achieved in any steady-state regime can be obtained by means of unsteady-state operations. In a normal way of operation the low exothermicity of the selective catalytic reduction (SCR) reaction (usually carried out in the range of 280-350°C) is not enough to maintain by itself the chemical reaction. A normal mode of operation usually requires supply of supplementary heat increasing in this way the overall process operation cost. Through forced unsteady-state operation, the main advantage that can be obtained when exothermic reactions take place is the possibility of trapping, beside the ammonia, the moving heat wave inside the catalytic bed. The unsteady state-operation enables the exploitation of the thermal storage capacity of the catalyticbed. The catalytic bed acts as a regenerative heat exchanger allowing auto-thermal behaviour when the adiabatic temperature rise is low. Finding the optimum reactor configuration, employing the most suitable operation model and identifying the reactor behavior are highly important steps in order to configure a proper device for industrial applications. The Reverse Flow Reactor (RFR) - a forced unsteady state reactor - corresponds to the above mentioned characteristics and may be employed as an efficient device for the treatment of dilute pollutant mixtures. As a main disadvantage, beside its advantages, the RFR presents the 'wash out' phenomena. This phenomenon represents emissions of unconverted reactants at every switch of the flow direction. As a consequence our attention was focused on finding an alternative reactor configuration for RFR which is not affected by the incontrollable emissions of unconverted reactants. In this respect the Reactor Network (RN) was investigated. Its configuration consists of several reactors connected in a closed sequence, simulating a moving bed by changing the reactants feeding position. In the RN the flow direction is maintained in the same way ensuring uniformcatalyst exploitation and in the same time the 'wash out' phenomena is annulated. The simulated moving bed (SMB) can operate in transient mode giving practically constant exit concentration and high conversion levels. The main advantage of the reactor network operation is emphasizedby the possibility to obtain auto-thermal behavior with nearly uniformcatalyst utilization. However, the reactor network presents only a small range of switching times which allow to reach and to maintain an ignited state. Even so a proper study of the complex behavior of the RN may give the necessary information to overcome all the difficulties that can appear in the RN operation. The unsteady-state reactors complexity arises from the fact that these reactor types are characterized by short contact times and complex interaction between heat and mass transportphenomena. Such complex interactions can give rise to a remarkable complex dynamic behavior characterized by a set of spatial-temporal patterns, chaotic changes in concentration and traveling waves of heat or chemical reactivity. The main efforts of the current research studies concern the improvement of contact modalities between reactants, the possibility of thermal wave storage inside the reactor and the improvement of the kinetic activity of the catalyst used. Paying attention to the above mentioned aspects is important when higher activity even at low feeding temperatures and low emissions of unconverted reactants are the main operation concerns. Also, the prediction of the reactor pseudo or steady-state performance (regarding the conversion, selectivity and thermal behavior) and the dynamicreactor response during exploitation are important aspects in finding the optimal control strategy for the forced unsteady state catalytic tubular reactors. The design of an adapted reactor requires knowledge about the influence of its operating conditions on the overall process performance and a precise evaluation of the operating parameters rage for which a sustained dynamic behavior is obtained. An apriori estimation of the system parameters result in diminution of the computational efforts. Usually the convergence of unsteady state reactor systems requires integration over hundreds of cycles depending on the initial guess of the parameter values. The investigation of various operation models and thermal transfer strategies give reliable means to obtain recuperative and regenerative devices which are capable to maintain an auto-thermal behavior in case of low exothermic reactions. In the present research work a gradual analysis of the SCR of NOx with ammonia process in forced unsteady-state reactors was realized. The investigation covers the presentationof the general problematic related to the effect of noxious emissions in the environment, the analysis of the suitable catalysts types for the process, the mathematical analysis approach for modeling and finding the system solutions and the experimental investigation of the device found to be more suitable for the present process. In order to gain information about the forced unsteady state reactor design, operation, important system parameters and their values, mathematical description, mathematicalmethod for solving systems of partial differential equations and other specific aspects, in a fast and easy way, and a case based reasoning (CBR) approach has been used. This approach, using the experience of past similarproblems and their adapted solutions, may provide a method for gaining informations and solutions for new problems related to the forced unsteady state reactors technology. As a consequence a CBR system was implemented and a corresponding tool was developed. Further on, grooving up the hypothesis of isothermal operation, the investigation by means of numerical simulation of the feasibility of the SCR of NOx with ammonia in the RFRand in the RN with variable feeding position was realized. The hypothesis of non-isothermal operation was taken into account because in our opinion ifa commercial catalyst is considered, is not possible to modify the chemical activity and its adsorptive capacity to improve the operation butis possible to change the operation regime. In order to identify the most suitable device for the unsteady state reduction of NOx with ammonia, considering the perspective of recuperative and regenerative devices, a comparative analysis of the above mentioned two devices performance was realized. The assumption of isothermal conditions in the beginningof the forced unsteadystate investigation allowed the simplification of the analysis enabling to focus on the impact of the conditions and mode of operation on the dynamic features caused by the trapping of one reactant in the reactor, without considering the impact of thermal effect on overall reactor performance. The non-isothermal system approach has been investigated in order to point out the important influence of the thermal effect on overall reactor performance, studying the possibility of RFR and RN utilization as recuperative and regenerative devices and the possibility of achieving a sustained auto-thermal behavior in case of lowexothermic reaction of SCR of NOx with ammonia and low temperature gasfeeding. Beside the influence of the thermal effect, the influence of the principal operating parameters, as switching time, inlet flow rate and initial catalyst temperature have been stressed. This analysis is important not only because it allows a comparison between the two devices and optimisation of the operation, but also the switching time is the main operating parameter. An appropriate choice of this parameter enables the fulfilment of the process constraints. The level of the conversions achieved, the more uniform temperature profiles, the uniformity ofcatalyst exploitation and the much simpler mode of operation imposed the RN as a much more suitable device for SCR of NOx with ammonia, in usual operation and also in the perspective of control strategy implementation. Theoretical simplified models have also been proposed in order to describe the forced unsteady state reactors performance and to estimate their internal temperature and concentration profiles. The general idea was to extend the study of catalytic reactor dynamics taking into account the perspectives that haven't been analyzed yet. The experimental investigation ofRN revealed a good agreement between the data obtained by model simulation and the ones obtained experimentally.

APPLICATION INTEGRATION IN GLOBAL ENTERPRISE

Diplomityö tehtiin Partek Oyj Abp:lle antamaan IT-järjestelmistä vastuussa oleville ja niihin tukeutuville johtohenkilöille yleisnäkemys IT-sovellusintegroinnista sekä luomaan ohjeet integrointi projekteihin. Diplomityön alkuosassa esitellään liiketoiminnan prosessien pulmakohtia ja sovellusintegrointien liiketoiminnalle tuomia etuja yleisellä tasolla perustuen kirjallisuuteen. Yleisen tason etuja saadaan mm. nopeampien prosessien, paremman tiedon saatavuuden ja ihmisille tulevien uusien toimintatapojen kautta tulevista eduista. Työn seuraavassa osiossa esitellään mitä sovellusintegraatio tarkoittaa käytännössä, mitä erilaisia vaihtoehtoja integroinneille on ja mitä etuja ja haittoja erilaisista integrointitavoista on. Integrointitavoista viesti-pohjainen integrointitapa on noussut suosituimmaksi sen yksinkertaisuuden, luotettavuuden ja helpon liitettävyyden takia. Integrointisovelluksilla on mahdollista siirtää, muokata, prosessoida ja varastoida viestejä. Näiden ominaisuuksien avulla on mahdollista luoda reaaliaikaisia yhteistyöverkostoja. Tämä osio perustuu kirjallisuuteen , artikkeleihin ja haastatteluihin. Kolmas osio keskittyy integrointi projektin ominaispiirteisiin luoden toimintakartan integrointiprojektin kululle. Osiossa esitellään huomioitavat tekniset asiat, kustannukset ja edut sekä mallipohjia integroinnin dokumentointiin. Osio perustuu omiin kokemuksiin, haastatteluihin sekä kirjallisuuteen. Neljännessä osiossa esitellään Partekissa tehty integrointiprojekti. Integrointityö tehtiin ostajille tarkoitetun toimittajarekisterin (PPM) ja ERP-järjestelmän (Baan) välillä. Integrointiin käytettiin yhtä suosituinta integrointityökalua nimeltään IBM WebSphere MQ.Osio perustuu projektin dokumentointiin, omiin kokemuksiin ja kirjallisuuteen. Diplomityön päättää yhteenveto. Kolme pääetua voidaan saavuttaa integroinneilla ja toimintakartalla; tiedon luotettavuus paranee, toimintakartalla saadaan integroinneille malli ja luodaan riippumattomuutta tiettyihin avain henkilöihin tarkalla dokumentoinnilla ja toimintatapojen standardoinnilla.

Cross-border post-acquisition integration performed by a Nordic information & telecommunication technology company in the transition economy context of the Czech Republic

Diplomityön tarkoituksena oli arvioida akvisition jälkeistä integraatioprosessia. Integraation tarkoitus on mukauttaa ostettu yritys toimivaksi osaksi konsernia. Työn empiirisenä ongelmana oli yleisesti tunnustettu integraatiojohtamisen kompleksisuus. Samoin myöskin akateemisesta kirjallisuudesta puuttui koherentti malli, jolla arvioida integraatiota. Tutkimuskohteena oli akvisitio, jossa suomalainen tietotekniikkan suuryritys osti osake-enemmistön tsekkiläisestä keskisuuresta ohjelmistoyrityksestä. Tutkimuksessa generoitiin integraatiojohtamisen malli tietopohjaiseen organisaatioon. Mallin mukaan integraatio koostuu kolmesta eriävästä, mutta toisiaan tukevasta alueesta: organisaatiokulttuurin yhdentyminen, tietopääoman tasaaminen ja konsernin sisäisten prosessien yhdenmukaistaminen. Näistä kaksi kaksi jälkimmäistä ovat johdettavissa, mutta kulttuurin yhdentymiseen integraatiojohtamisella voidaan vaikuttaa vain katalysoivasti. Organisaatiokulttuuri levittäytyy vain osallisten vuorovaikuksien kautta. Lisäksi tutkimus osoitti, miten akvisitio on revolutionaarinen vaihe yrityksen kehityksessä. Integraation ensimmäinen ajanjakso on revolutionaarista. Tällöin suurimmat ja näkyvimmät johdettavat muutokset pyritään saamaan aikaan, jotta integraatiossa edettäisiin evolutionaariseen kehitykseen. Revolutionaarisen intergaation vetojuhtana toimii integraatiojohto, kun taas evolutionaarinen integraatio etenee osallisten (organisaation jäsenten) itsensä toiminnan ja vuorovaikutusten kautta.

ADVANCED NUMERICAL METHODS FOR SIMULATING MICROBUBBLE IN AN AERATED MIXING TANK

Fluid mixing in mechanically agitated tanks is one of the major unit operations in many industries. Bubbly flows have been of interest among researchers in physics, medicine, chemistry and technology over the centuries. The aim of this thesis is to use advanced numerical methods for simulating microbubble in an aerated mixing tank. Main components of the mixing tank are a cylindrical vessel, a rotating Rushton turbine and the air nozzle. The objective of Computational Fluid Dynamics (CFD) is to predict fluid flow, heat transfer, mass transfer and chemical reactions. The CFD simulations of a turbulent bubbly flow are carried out in a cylindrical mixing tank using large eddy simulation (LES) and volume of fluid (VOF) method. The Rushton turbine induced flow is modeled by using a sliding mesh method. Numerical results are used to describe the bubbly flows in highly complex liquid flow. Some of the experimental works related to turbulent bubbly flow in a mixing tank are briefly reported. Numerical simulations are needed to complete and interpret the results of the experimental work. Information given by numerical simulations has a major role in designing and scaling-up mixing tanks. The results of this work have been reported in the following scientific articles: ·Honkanen M., Koohestany A., Hatunen T., Saarenrinne P., Zamankhan P., Large eddy simulations and PIV experiments of a two-phase air-water mixer, in Proceedings of ASME Fluids Engineering Summer Conference (2005). ·Honkanen M., Koohestany A., Hatunen T., Saarenrinne P., Zamankhan P., Dynamical States of Bubbling in an Aerated Stirring Tank, submitted to J. Computational Physics.

Integration and Implementation of Accounting Information Systems in Global Companies Case: The UPM-Kymmene Group

Tämän tutkielman tavoitteena on perehtyä globaalin yrityksen laskentatoimen tietojärjestelmien yhtenäistämiseen ja käyttöönottoon esimerkkinä UPM-Kymmene konsernin projekti. Tutkielmassa sovelletaan hermeneuttista tutkimusotetta. Teoreettisesti aihetta tarkastellaan globalisoitumisen ja laskentatoimen tietojärjestelmille asetettavien vaatimusten pohjalta, sekä järjestelmän muutosprosessin eri vaiheissa huomioon otettavien muuttujien perusteella. Yhtenäisen laskentatoimen tietojärjestelmän tuomat edut globaalille yritykselle ovat ilmeisiä. Ennen yhtenäisen projektin kehittelyä on olennaista tutkia lähtökohdat projektin onnistumiselle ja suunnitella projektin eri vaiheet huolella. Tutkielmassa havaitaan myös, että globaalissa yrityksessä tulee huomioida eri yrityskulttuurit sekä tulosyksiköiden erilaiset toimintatavat. Johtopäätöksenä todetaan, että sekä yritysjohdon että tulosyksiköiden sitoutuneisuus projektiin ja yhtenäiset tavoitteet ovat oleellisia projektin onnistumisen kannalta.

Integration of Economics into Life Cycle Assessment in the Finnish Pulp and Paper Industry

Taloudellisen laskennan yhdistäminen elinkaariarviointiin (LCA) on alkanut kiinnostaa eri teollisuuden aloja maailmanlaajuisesti viime aikoina. Useat LCA-tietokoneohjelmat sisältävät kustannuslaskentaominaisuuksia ja yksittäiset projektit ovat yhdistäneet ympäristö- ja talouslaskentamenetelmiä. Tässä projektissa tutkitaan näiden yhdistelmien soveltuvuutta suomalaiselle sellu- ja paperiteollisuudelle, sekä kustannuslaskentaominaisuuden lisäämistä KCL:n LCA-ohjelmaan, KCL-ECO 3.0:aan. Kaikki tutkimuksen aikana löytyneet menetelmät, jotka yhdistävät LCA:n ja taloudellista laskentaa, on esitelty tässä työssä. Monet näistä käyttävät elinkaarikustannusarviointia (LCCA). Periaatteessa elinkaari määritellään eri tavalla LCCA:ssa ja LCA:ssa, mikä luo haasteita näiden menetelmien yhdistämiselle. Sopiva elinkaari tulee määritellä laskennan tavoitteiden mukaisesti. Työssä esitellään suositusmenetelmä, joka lähtee suomalaisen sellu- ja paperiteollisuuden erikoispiirteistä. Perusvaatimuksena on yhteensopivuus tavanomaisesti paperin LCA:ssa käytetyn elinkaaren kanssa. Menetelmän yhdistäminen KCL-ECO 3.0:aan on käsitelty yksityiskohtaisesti.

Challenges of Post-acquisition Integration

Työ käsittelee suomalaisen kemianalan yrityksen Yhdysvalloissa tekemää yritysostoa. Tarkastelun kohteena on yritysoston jälkeinen integraatio erityisesti kulttuurin näkökulmasta. Ongelma on jaettu kahteen suurempaan osakokonaisuuteen: kulttuurierojen analysointiin sekä mahdollisten muiden ongelma-alueiden kartoittamiseen. Kulttuuri on jaettu työssä neljään tasoon. Koska kyseessä on kansainvälinen liiketoiminta, laajimmasta tasosta, kansallisesta kulttuurista on erotettu omaksi käsitteekseen liiketoimintatavat tietyssä maassa. Lisäksi tarkastellaan teollisuudenalan kulttuuria ja yrityskulttuuria. Näitä kulttuurin eri dimensioita on lähestytty empiirisessä osassa lähinnä haastattelujen avulla. Kultuurierojen lisäksi muita huomioitavia seikkoja Yhdysvalloissa tehtävien yritysostojen integraatiossa ovat mm. riittävä ja selkeä kommunikonti, etukäteissuunnitelmat ja –tutkimukset, päätöksenteon ja organisaatiorakenteen erilaisuus sekä asianajajien merkittävä asema amerikkalaisessa yhteiskunnassa. Tulokset analysoitiin kyselystä, joka lähetettiin niille suomalaisille yrityksille, jotka vuoden 1990 jälkeen olivat tehneet yritysostoja Yhdysvalloissa.

Problems of the architecture design in the system integration

This thesis studies the problems and their reasons a software architect faces in his work. The purpose of the study is to search and identify potential factors causing problens in system integration and software engineering. Under a special interest are non-technical factors causing different kinds of problems. Thesis was executed by interviewing professionals that took part in e-commerce project in some corporation. Interviewed professionals consisted of architects from technical implementation projects, corporation's architect team leader, different kind of project managers and CRM manager. A specific theme list was used as an guidance of the interviews. Recorded interviews were transcribed and then classified using ATLAS.ti software. Basics of e-commerce, software engineering and system integration is described too. Differences between e-commerce and e-business as well as traditional business are represented as are basic types of e-commerce. Software's life span, general problems of software engineering and software design are covered concerning software engineering. In addition, general problems of the system integration and the special requirements set by e-commerce are described in the thesis. In the ending there is a part where the problems founded in study are described and some areas of software engineering where some development could be done so that same kind of problems could be avoided in the future.

Stock and Bond Market Integration: Evidence from Russian Financial Markets

Minimizing the risks of an investment portfolio but not in the favour of expected returns is one of the key interests of an investor. Typically, portfolio diversification is achieved using two main strategies: investing in different classes of assets thought to have little or negative correlations or investing in similar classes of assets in multiple markets through international diversification. This study investigates integration of the Russian financial markets in the time period of January 1, 2003 to December 28, 2007 using daily data. The aim is to test the intra-country and cross-country integration of the Russian stock and bond markets between seven countries. Our test methodology for the short-run dynamics testing is the vector autoregressive model (VAR) and for the long-run cointegration testing we use the Johansen cointegration test which is an extension to VAR. The empirical results of this study show that the Russian stock and bond markets are not integrated in the long-run either at intra-country or cross-country level which means that the markets are relatively segmented. The short-run dynamics are also relatively low. This implies a presence of potential gains from diversification.

Integration of a Bioethanol Process to a Pulp Mill

Tässä diplomityössä tutkittiin puuhakkeen esihydrolyysi- ja hakkuujätteen hydrolyysiprosessien integroimista sellutehtaaseen bioetanolin tuottamiseksi. Tällaisesta ns. biojalostamosta luotiin WinGEMS-simulointiohjelmalla simulointimalli, jonka avulla tutkittiin bioetanoliprosessin vaikutusta sellutehtaan massa- ja energiataseisiin sekä alustavaa biojalostamon kannattavuutta. Simuloinnissa tarkasteltiin kolmea eri tapausta, joissa mäntysellun tuotannon ajateltiin olevan 1000 tonnia päivässä ja hakkuujätettä käytettävän 10 % tarvittavan kuitupuun määrästä: 1) Puuhakkeen esihydrolyysi ja hakkuujätteen hydrolyysi etanolin tuottamiseksi 2) Puuhakkeen esihydrolyysi, hakkuujäte kuorikattilaan poltettavaksi 3) Ei esihydrolyysiä, hakkuujäte kuorikattilaan poltettavaksi Verrattuna tapaukseen 3, puun kulutus kasvaa 16 % esihydrolysoitaessa puuhake ennen keittoa tapauksissa 1 ja 2. Kasvaneella puun kulutuksella tuotetaan tapauksessa 1 149 tonnia etanolia ja 240 MWh enemmän ylimääräsähköä päivässä. Tapauksessa 2 tuotetaan 68 tonnia etanolia ja 460 MWh enemmän ylimääräsähköä päivässä. Tämä tuottaisi vuotuista lisäkassavirtaa 18,8 miljoonaa euroa tapauksessa 1 ja 9,4 miljoonaa euroa tapauksessa 2. Hydrolyysin tuoteliuoksen, hydrolysaatin, haihduttaminen sekä hydrolyysiprosessien orgaanisten jäännöstuotteiden haihduttaminen ja polttaminen kasvattavat haihduttamon ja soodakattilan kuormitusta. Verrattuna tapaukseen 3, tapauksissa 1 ja 2 haihduttamon vaiheiden määrä on kasvatettava viidestä seitsemään ja tarvittavat lämmönsiirtopinta-alat lähes kaksinkertaistettava. Soodakattilan kuormitus kasvaa 39 % tapauksessa 1 ja 26 % tapauksessa 2.