Pre- and postnatal nutrition – target for allergy risk reduction

A rapid increase in allergic diseases in Western societies has led to the conclusion that our modern lifestyle is a risk factor for immune dysregulation. Potential culprits and benefactors are searched among early dietary and microbial exposures, which may act to program later allergic disease. The aim of this thesis was to investigate the role of early maternal and child nutrition in reducing the risk of child allergy. The study population comprised of 256 mother – child pairs from families with a history of allergy participating in a randomized controlled dietary counseling and probiotic intervention (Lactobacillus rhamnosus GG and Bifidobacterium lactis Bb12) study from early pregnancy onwards. The dietary counseling aimed for a diet complying with dietary recommendations for pregnant and lactating women, with special attention to fat quality. Maternal dietary counseling was reflected in cord blood fatty acids suggesting better essential fatty acid status in infants in the counseling group. Dietary counseling with probiotics or placebo had no effect on child allergy risk, but associations between maternal diet during pregnancy and breastfeeding and child allergic outcomes were found in secondary analyses. During pregnancy, milk intake was related to decreased and cheese intake to increased risk of child atopic eczema. During breastfeeding, intake of vitamin C was related to increased risk of asthma and intake of egg was related to decreased risk of atopic eczema. The timing of introduction of complementary foods to infant’s diet was not associated with risk of atopic eczema, when adjusted with parental opinion of child allergic symptoms (i.e., potential reverse causality). In conclusion, the results demonstrate that infant fatty acid supply can be modified via maternal dietary changes. In addition, interesting associations of maternal diet with child allergy risk were discovered. However, no difference in the incidence of allergic diseases with dietary counseling was observed. This suggests that more potent dietary interventions might be necessitated to induce clinical risk reduction of allergy. Highrisk families can safely adhere to dietary recommendations for pregnant and lactating women, and the results support the current conception that no additional benefit is gained with delaying introduction of complementary feeding.

Collective Action in Commons: Its Diverse Ends and Consequences

Collective Action in Commons: Its Diverse Ends and Consequences explores new ways in which collective action theories can contribute to our understanding of natural resource management, especially the management of common-pools. Combining classical collective action theories and lessons from earlier empirical works, the study shows that cooperation among resource users is not only a possible solution to “the tragedy of the commons”, but it can be a part of the problem as well. That is, successful cooperation may increase the likelihood of resource depletion, for example, through more effective resource utilization or collusion against sanctioning and monitoring systems. The study also explores how analytic narratives can be used to tell the story behind problems of resource use and their solutions, including the diverse roles of cooperation.

Evidencing and Sharing Value with Decision Making Models in an Industrial Maintenance Network

The objective of this thesis is to concretize the potential benefits that the industrial maintenance case network could achieve through using the value-based life-cycle model and the flexible asset management model. It is also inspected what factors prevent value creation and sharing in the maintenance contract practices of the case network. This thesis is a case study which utilizes modelling. Four scenarios were developed to demonstrate value creation in the future. The data was partly provided by the collaborating company, partly gathered from public financial statement information. The results indicate that value has been created through the past maintenance of the collaborating company’s rod mill and that profitability of the collaborating company has been mostly on satisfactory level during the past few years. Potential value might be created by increasing the share of proactive maintenance of the rod mill in the future. Profitability of the network could be improved in the future through flexible asset management operations. The main obstacle for value creation and sharing seems to be the lack of sufficient trust between the network members.

The requirements and needs of global data usage in product lifecycle management

This study was done for ABB Ltd. Motors and Generators business unit in Helsinki. In this study, global data movement in large businesses is examined from a product data management (PDM) and enterprise resource planning (ERP) point-of-view. The purpose of this study was to understand and map out how a large global business handles its data in a multiple site structure and how it can be applied in practice. This was done by doing an empirical interview study on five different global businesses with design locations in multiple countries. Their master data management (MDM) solutions were inspected and analyzed to understand which solution would best benefit a large global architecture with many design locations. One working solution is a transactional hub which negates the effects of multisite transfers and reduces lead times. Also, the requirements and limitations of the current MDM architecture were analyzed and possible reform ideas given.  

Multiple sclerosis and pregnancy: clinical and immunological aspects

Background: Multiple Sclerosis (MS) is an autoimmune disease of the central nervous system that affects most commonly young women in their childbearing age. Previous studies have shown that MS relapse rate usually reduces during pregnancy and increases again after delivery. Patients with MS and their treating physicians are interested to know more about the risks the disease can cause to pregnancy and how pregnancy affects the disease. The reasons for increased relapse rate after delivery are not entirely clear, but loss of pregnancy related immune tolerance and changes in the hormonal status at the time of delivery seem to be of relevance. Aims and methods: The aims of this study were to follow the natural course of MS during and after pregnancy, evaluate pregnancy related risks among MS patients, follow the inflammatory response of MS patients during and after pregnancy and clarify the risk of relevant co-morbidities known to affect other autoimmune diseases after pregnancy and compare these results to healthy controls. This study was a part of a prospective nation-wide follow-up study of 60 Finnish MS patients. All eligible MS patients were enrolled in the study during the years 2003-2005. A prospective followup continued from early pregnancy until six months postpartum. MS relapses, EDSS scores and obstetric details were recorded. Blood samples were obtained from the patients at early, middle, and late pregnancy, after delivery and one month, three months and six months postpartum. Results: MS patients were no more likely to experience pregnancy or delivery complications than the Finnish mothers in general. The need of instrumental assistance, however, was higher among mothers with MS. Disease activity followed the course seen in previous studies. The majority of mothers (90.2%) breastfed their babies. Contrary to previous results, breastfeeding did not protect MS patients from disease worsening after delivery in present study. Mothers with active pre-pregnancy disease chose to breastfeed less frequently and started medication instead. MS patients presented with higher prevalence of elevated thyroid autoantibodies postpartum than healthy controls, but the rate of thyroid hormonal dysfunction was similar as that of healthy controls. The mode of delivery nor the higher rate of tissue damage assessed with C-reactive protein concentration were not predictive of postpartum relapses. The prevalence of gestational diabetes was slightly higher among mothers with MS compared to Finnish mothers in general, but postpartum depression was observed in similar rates. MS patients presented with significantly lower serum concentrations of vitamin D during pregnancy and postpartum than healthy controls. Conclusions: Childbearing can be regarded as safe for mothers with MS as it is for healthy mothers in general. Breastfeeding can be recommended, but it should be done only after careful evaluation of the individual risk for postpartum disease activation. Considering MS patients tend to develop thyroid antibody positivity after delivery more often than healthy controls and that certain treatments can predispose MS patients to thyroid hormonal dysfunction, we recommend MS mothers to be screened for thyroid abnormalities during pregnancy and after delivery. Increased risk for gestational diabetes should be kept in mind when following MS mothers and glucose tolerance test in early pregnancy should be considered. Adequate vitamin D supplementation is essential for MS mothers also during pregnancy and postpartum period.

Production planning and optimization of a pulp mill: introduction of the optimisation based scheduling software for pulp industry

The objective of this project was to introduce a new software product to pulp industry, a new market for case company. An optimization based scheduling tool has been developed to allow pulp operations to better control their production processes and improve both production efficiency and stability. Both the work here and earlier research indicates that there is a potential for savings around 1-5%. All the supporting data is available today coming from distributed control systems, data historians and other existing sources. The pulp mill model together with the scheduler, allows what-if analyses of the impacts and timely feasibility of various external actions such as planned maintenance of any particular mill operation. The visibility gained from the model proves also to be a real benefit. The aim is to satisfy demand and gain extra profit, while achieving the required customer service level. Research effort has been put both in understanding the minimum features needed to satisfy the scheduling requirements in the industry and the overall existence of the market. A qualitative study was constructed to both identify competitive situation and the requirements vs. gaps on the market. It becomes clear that there is no such system on the marketplace today and also that there is room to improve target market overall process efficiency through such planning tool. This thesis also provides better overall understanding of the different processes in this particular industry for the case company.

Graphene from Graphite by Chemical and Physical Techniques.

Graphene is a material with extraordinary properties. Its mechanical and electrical properties are unparalleled but the difficulties in its production are hindering its breakthrough in on applications. Graphene is a two-dimensional material made entirely of carbon atoms and it is only a single atom thick. In this work, properties of graphene and graphene based materials are described, together with their common preparation techniques and related challenges. This Thesis concentrates on the topdown techniques, in which natural graphite is used as a precursor for the graphene production. Graphite consists of graphene sheets, which are stacked together tightly. In the top-down techniques various physical or chemical routes are used to overcome the forces keeping the graphene sheets together, and many of them are described in the Thesis. The most common chemical method is the oxidisation of graphite with strong oxidants, which creates a water-soluble graphene oxide. The properties of graphene oxide differ significantly from pristine graphene and, therefore, graphene oxide is often reduced to form materials collectively known as reduced graphene oxide. In the experimental part, the main focus is on the chemical and electrochemical reduction of graphene oxide. A novel chemical route using vanadium is introduced and compared to other common chemical graphene oxide reduction methods. A strong emphasis is placed on electrochemical reduction of graphene oxide in various solvents. Raman and infrared spectroscopy are both used in in situ spectroelectrochemistry to closely monitor the spectral changes during the reduction process. These in situ techniques allow the precise control over the reduction process and even small changes in the material can be detected. Graphene and few layer graphene were also prepared using a physical force to separate these materials from graphite. Special adsorbate molecules in aqueous solutions, together with sonic treatment, produce stable dispersions of graphene and few layer graphene sheets in water. This mechanical exfoliation method damages the graphene sheets considerable less than the chemical methods, although it suffers from a lower yield.

NIR-Vis Up-Conversion Luminescence in the Yb3+,Er3+ Doped Y2O2S, ZrO2, and NaYF4 Nanomaterials

Since the discovery of the up-conversion phenomenon, there has been an ever increasing interest in up-converting phosphors in which the absorption of two or more low energy photons is followed by emission of a higher energy photon. Most up-conversion luminescence materials operate by using a combination of a trivalent rare earth (lanthanide) sensitizer (e.g. Yb or Er) and an activator (e.g. Er, Ho, Tm or Pr) ion in a crystal lattice. Up-converting phosphors have a variety of potential applications as lasers and displays as well as inks for security printing (e.g. bank notes and bonds). One of the most sophisticated applications of lanthanide up-conversion luminescence is probably in medical diagnostics. However, there are some major problems in the use of photoluminescence based on the direct UV excitation in immunoassays. Human blood absorbs strongly UV radiation as well as the emission of the phosphor in the visible. A promising way to overcome the problems arising from the blood absorption is to use a long wavelength excitation and benefit from the up-conversion luminescence. Since there is practically no absorption by the whole-blood in the near IR region, it has no capability for up-conversion in the excitation wavelength region of the conventional up-converting phosphor based on the Yb3+ (sensitizer) and Er3+ (activator) combination. The aim of this work was to prepare nanocrystalline materials with high red (and green) up-conversion luminescence efficiency for use in quantitative whole-blood immunoassays. For coupling to biological compounds, nanometer-sized (crystallite size below 50 nm) up-converting phosphor particles are required. The nanocrystalline ZrO2:Yb3+,Er3+, Y2O2S:Yb3+,Er3+, NaYF4:Yb3+,Er3+ and NaRF4-NaR’F4 (R: Y, Yb, Er) materials, prepared with the combustion, sol-gel, flux, co-precipitation and solvothermal synthesis, were studied using the thermal analysis, FT-IR spectroscopy, transmission electron microscopy, EDX spectroscopy, XANES/EXAFS measurements, absorption spectroscopy, X-ray powder diffraction, as well as up-conversion and thermoluminescence spectroscopies. The effect of the impurities of the phosphors, crystallite size, as well as the crystal structure on the up-conversion luminescence intensity was analyzed. Finally, a new phenomenon, persistent up-conversion luminescence was introduced and discussed. For efficient use in bioassays, more work is needed to yield nanomaterials with smaller and more uniform crystallite sizes. Surface modifications need to be studied to improve the dispersion in water. On the other hand, further work must be carried out to optimize the persistent up-conversion luminescence of the nanomaterials to allow for their use as efficient immunoassay nanomaterials combining the advantages of both up-conversion and persistent luminescence.

Employee layoff announcements and shareholder wealth: empirical evidence from Finland 2008-2013

This thesis investigates the short-term stock price reaction to layoff announcements in Finland. It also studies whether the characteristics of the firm or the layoff announcement have an impact on the stock market reaction. Standard event study methodology was utilized to examine the stock price reactions to layoffs and to test the created hypotheses. The event pool consisted of 102 publicly disclosed layoff announcements that were announced during the time period from June 2008 to December 2013. The empirical results show that the stock market reaction is strongly positive in the pre-event period of -10 to -1 with CAAR of 2,69%. The reaction is however slightly negative on the event date with AAR of -0,57%. Based on the results the conclusion is that either the managers are timing the markets or the layoffs are seen as efficiency improving acts and the market becomes aware of such actions pre-event. Additionally different characteristic hypotheses are tested to find out whether they would explain the reaction. The characteristics are: the reason stated by the management, business cycle, industry group, prior performance, leverage-ratio, the size of the company, the size of the layoff and the duration of the layoff.

Decision making and decision support in service systems

This thesis is a literature study that develops a conceptual model of decision making and decision support in service systems. The study is related to the Ä-Logi, Intelligent Service Logic for Welfare Sector Services research project, and the objective of the study is to develop the necessary theoretical framework to enable further research based on the research project results and material. The study first examines the concepts of service and service systems, focusing on understanding the characteristics of service systems and their implications for decision making and decision support to provide the basis for the development of the conceptual model. Based on the identified service system characteristics, an integrated model of service systems is proposed that views service systems through a number of interrelated perspectives that each offer different, but complementary, implications on the nature of decision making and the requirements for decision support in service systems. Based on the model, it is proposed that different types of decision making contexts can be identified in service systems that may be dominated by different types of decision making processes and where different types of decision support may be required, depending on the characteristics of the decision making context and its decision making processes. The proposed conceptual model of decision making and decision support in service systems examines the characteristics of decision making contexts and processes in service systems, and their typical requirements for decision support. First, a characterization of different types of decision making contexts in service systems is proposed based on the Cynefin framework and the identified service system characteristics. Second, the nature of decision making processes in service systems is proposed to be dual, with both rational and naturalistic decision making processes existing in service systems, and having an important and complementary role in decision making in service systems. Finally, a characterization of typical requirements for decision support in service systems is proposed that examines the decision support requirements associated with different types of decision making processes in characteristically different types of decision making contexts. It is proposed that decision support for the decision making processes that are based on rational decision making can be based on organizational decision support models, while decision support for the decision making processes that are based on naturalistic decision making should be based on supporting the decision makers’ situation awareness and facilitating the development of their tacit knowledge of the system and its tasks. Based on the proposed conceptual model a further research process is proposed. The study additionally provides a number of new perspectives on the characteristics of service systems, and the nature of decision making and requirements for decision support in service systems that can potentially provide a basis for further discussion and research, and support the practice alike.

Operations management in courts of justice - outlining functions, challenges and development possibilities

Professional services are an increasingly important group of economy and related to them there has been identified a fairly new concept called professional service operations management. However professional service operations management is still quite under-researched area which needs further research especially in specific contexts. This study aims to respond to that need by examining courts as an environment for operations management. As a result there is a preliminary structured description of what operations management is and could be in courts. The study also aims to inspire and tentatively classify possible areas for future research. Courts are examined based on three common perspectives for typical characteristics of professional services which can be identified in literature: the nature of customer role, the nature of professional work and the nature of process and product. The examination is based on research data from several research projects conducted in Finland and other European countries. Based on the examination it can be said that the operational environment of courts is highly complex and demanding because the case as an object of operations management tasks is challenging, the process sets strict requirements to the handling of the cases and the workforce is hard to direct.

Feeling vs. Being like a Domestic Goddess: Cookbooks and Lifestyle Choices

Tämä pro gradu -tutkielma tarkastelee, miten keittokirjat muovaavat pääasiassa naispuolista lukijakuntaansa. Tärkein kysymys, johon tutkielmassa on etsitty vastausta on, että onko naisilla, menneiden sukupolvien taisteltua vuosikymmeniä tasa-arvon puolesta, oikeus valita viettää aikaa keittiössä ja oikeasti nauttiakin siitä. Kahtena päälähteenä tutkielmassa on käytetty brittiläisen Nigella Lawsonin keittokirjoja How to Eat ja How to be a Domestic Goddess. Näiden kirjojen analysoinnin ja muiden lähteiden avulla tutkielmassa on käsitelty ruuanlaiton ja leipomisen nautittavuutta ja sitä onko se ylipäätään sallittua vai syntistä. Lawson on julkaissut urallaan sitten vuoden 1998 yhteensä yhdeksän keittokirjaa, joiden lisäksi kirjojen tueksi on tehty useita televisiosarjoja. How to Eat on yleispätevä opas hyvän ruuan nautintoihin ja periaatteisiin, How to be a Domestic Goddess taas sisältää lähinnä leivontareseptejä. Nämä kaksi kirjaa ovat Lawsonin ensimmäiset keittokirjat. Nigella Lawsonin keittokirjat eivät ole vain reseptikokelmia eivätkä reseptit vain aineisosalistoja ja valmistusohjeita. Lawsonin kirjoja voi lukea kirjallisuutena eikä vain reseptien takia. Lawson viittaa usein naisen asemaan ja yrittää vakuuttaa lukijoitaan ruuanlaiton ja leipomisen nautittavuudesta.

Mobile Banking and Mobile Payments: Changing Banking Services in Finland

The purpose of this thesis is to examine how mobile banking and mobile payments services will change the banking sector in Finland, and what role non-bank companies from the IT and telecom industries will play in this process. The thesis consists of a literature review and a qualitative study. The literature review forms a comprehensive overview of mobile banking and mobile payments services. The qualitative research was conducted as a descriptive study, focusing on the views of bank and non-bank players. The results show that banks have a significant advantage over their IT and telecom rivals in regards to their service offering, financial buffer, and status as trustworthy institutions. The banks’ embrace of mobile financial services will change the Finnish banking sector into one, with a light branch network focused on sales power, and a heavy emphasis on new mobile devices providing service power regardless of time and place.

Taxonomy and Species Richness of Amazonian Pimplinae and Rhyssinae (hymenoptera: ichneumonidae)

The Amazonian region, the biggest rain forest of our planet, is known for its extraordinary biodiversity. Most of this diversity is still unexplored and new species of different taxa are regularly found there. In this region, as in most areas of the world, insects are some of the most abundant organisms. Therefore, studying this group is important to promote the conservation of these highly biodiverse ecosystems of the planet. Among insects, parasitoid wasps are especially interesting because they have potential for use as biodiversity indicators and biological control agents in agriculture and forestry. The parasitoid wasp family Ichneumonidae is one of the most species rich groups among the kingdom Animalia. This group is still poorly known in many areas of the world; the Amazonian region is a clear example of this situation. Ichneumonids have been thought to be species poor in Amazonia and other tropical areas. However, recent studies are suggesting that parasitoid wasps may be quite abundant in Amazonia and possibly in most tropical areas of the world. The aim of my doctoral thesis is to study the species richness and taxonomy of two of the best known ichneumonid subfamilies in the Neotropical region, Pimplinae and Rhyssinae. To do this I conducted two extensive sampling programs in the Peruvian Amazonia. I examined also a large number of Neotropical ichneumonids deposited to different natural history museums. According to the results of my thesis, the species richness of these parasitoids in the Amazonian region is considerably higher than previously reported. In my research, I firstly further develop the taxonomy of these parasitoids by describing many new species and reporting several new faunistic records (I, II, III). In this first part I focus on two genera (Xanthopimpla and Epirhyssa) which were thought to be rather species poor. My thesis demonstrates that these groups are actually rather species rich in the Amazonian region. Secondly, I concentrate on the species richness of these parasitoids in a global comparison showing that the Neotropical region and especially the Peruvian Amazonia is one of the most species rich areas of Pimpliformes ichneumonids (V). Furthermore, I demonstrate that with the data available to date no clear latitudinal gradient in species richness is visible. Thirdly, increasing the macroecological knowledge of these parasitoids I show that some previously unreported ichneumonid subfamilies are present in the Amazonian region (IV). These new insights and the results of the global comparison of ichneumonid inventories suggest that the previous belief of low diversity in the tropics is most likely related to a lack of sampling effort in the region. Overall, my research increases the knowledge of Neotropical ichneumonids highlighting the importance of Peruvian Amazonia as one of the diversity hotspots of parasitoid wasps.

Value based pricing and marketing of marine engines

Objective of the thesis is to create a value based pricing model for marine engines and study the feasibility of implementing such model in the sales organization of a specific segment in the case company’s marine division. Different pricing strategies, concept of “value”, and how perceptions of value can be influenced through value based marketing are presented as theoretical background for the value based pricing model. Forbis and Mehta’s Economic Value to Customer (EVC) was selected as framework to create the value based pricing model for marine engines. The EVC model is based on calculating and comparing life-cycle costs of the reference product and competing products, thus showing the quantifiable value of the company’s own product compared to competition. In the applied part of the thesis, the components of the EVC model are identified for a marine diesel engine, the components are explained, and an example calculation created in Excel is presented. When examining the possibilities to implement in practice a value based pricing strategy based on the EVC model, it was found that the lack of precise information on competing products is the single biggest obstacle to use EVC exactly as presented in the literature. It was also found that sometimes necessary communication channels are missing and that there is simply a lack of interest from some clients and product end-users part to spend time on studying the life-cycle costs of the product. Information on the company’s own products is however sufficient and the sales force is capable to communicate to sufficiently high executive levels in the client organizations. Therefore it is suggested to focus on quantifying and communicating the company’s own value proposition. The dynamic nature of the business environment (variance in applications in which engines are installed, different clients, competition, end-clients etc.) means also that each project should be created its own EVC calculation. This is demanding in terms of resources needed, thus it is suggested to concentrate on selected projects and buyers, and to clients where the necessary communication channels to right levels in the customer organization are available. Finally, it should be highlighted that as literature suggests, implementing a value based pricing strategy is not possible unless the whole business approach is value based.