Innovation process management of complex consumer products and services in new innovation paradigm – case location based business

Innovation is the word of this decade. According to innovation definitions, without positive sales impact and meaningful market share the company’s product or service has not been an innovation. Research problem of this master thesis is to find out what is the innovation process of complex new consumer products and services in new innovation paradigm. The objective is to get answers to two research questions: 1) What are the critical success factors what company should do when it is implementing the paradigm change in mass markets consumer business with complex products and services? 2) What is the process or framework one firm could follow? The research problem is looked from one company’s innovation creation process, networking and organization change management challenges point of views. Special focus is to look the research problem from an existing company perspective which is entering new business area. Innovation process management framework of complex new consumer products and services in new innovation paradigm has been created with support of several existing innovation theories. The new process framework includes the critical innovation process elements companies should take into consideration in their daily activities when they are in their new business innovation implementing process. Case company location based business implementation activities are studied via the new innovation process framework. This case study showed how important it is to manage the process, look how the target market and the competition in it is developing during company’s own innovation process, make decisions at right time and from beginning plan and implement the organization change management as one activity in the innovation process. In the end this master thesis showed that all companies need to create their own innovation process master plan with milestones and activities. One plan does not fit all, but all companies can start their planning from the new innovation process what was introduced in this master thesis.

Asiakaslähtöisyyden huomioiminen teollisuusyritysten hinnanasetannassa

Tämän työn tarkoituksena oli tutkia tuotteen hinnanasetantaa teollisuusyrityksissä asiakaslähtöisyyden näkökulmasta. Hinnoittelumenetelmiä ja hinnoittelustrategioita tutkimalla pyrittiin etsimään ne tekijät, jotka tulisi ottaa huomioon suunniteltaessa arvoperusteista hinnoittelumenetelmää. Tutkimus on toteutettu yhden tapauksen kvalitatiivisena tutkimuksena ja se suoritettiin teollisuuden tuotteita valmistavassa yrityksessä. Haastattelut tehtiin vuoden 2008 alussa yksilöhaastatteluina käyttäen pohjana puolistrukturoitua haastattelurunkoa. Tutkimustulokset osoittavat, että kohdeyrityksestä voidaan löytää ne tekijät, jotka teorian mukaan tulisi ottaa huomioon suunniteltaessa asiakkaan arvoon perustuvaa hinnoittelua. Tutkimustulosten mukaan asiakaslähtöisyyttä tarkastellaan asiakkaan näkökulmasta. Asiakas määrittelee näin ollen itse tuotteista kokemansa/havaitsemansa arvon. Tuotteen arvon onnistunut argumentointi asiakkaalle nähdään myös tärkeänä kilpailutekijänä.

Evaluation of Teacher Education Programs by Students and Graduates

The purpose of this research was to do a repeated cross-sectional research on class teachers who study in the 4th year and also graduated at the Faculty of Education, University of Turku between the years of 2000 through 2004. Specifically, seven research questions were addressed to target the main purpose of the study: How do class teacher education masters’ degree senior students and graduates rate “importance; effectiveness; and quality” of training they have received at the Faculty of Education? Are there significant differences between overall ratings of importance; effectiveness and quality of training by year of graduation, sex, and age (for graduates) and sex and age (for senior students)? Is there significant relationship between respondents’ overall ratings of importance; effectiveness and their overall ratings of the quality of training and preparation they have received? Are there significant differences between graduates and senior students about importance, effectiveness, and quality of teacher education programs? And what do teachers’ [Graduates] believe about how increasing work experience has changed their opinions of their preservice training? Moreover the following concepts related to the instructional activities were studied: critical thinking skills, communication skills, attention to ethics, curriculum and instruction (planning), role of teacher and teaching knowledge, assessment skills, attention to continuous professional development, subject matters knowledge, knowledge of learning environment, and using educational technology. Researcher also tried to find influence of some moderator variables e.g. year of graduation, sex, and age on the dependent and independent variables. This study consisted of two questionnaires (a structured likert-scale and an open ended questionnaire). The population in study 1 was all senior students and 2000-2004 class teacher education masters’ degree from the departments of Teacher Education Faculty of Education at University of Turku. Of the 1020 students and graduates the researcher was able to find current addresses of 675 of the subjects and of the 675 graduates contacted, 439 or 66.2 percent responded to the survey. The population in study 2 was all class teachers who graduated from Turku University and now work in the few basic schools (59 Schools) in South- West Finland. 257 teachers answered to the open ended web-based questions. SPSS was used to produce standard deviations; Analysis of Variance; Pearson Product Moment Correlation (r); T-test; ANOVA, Bonferroni post-hoc test; and Polynomial Contrast tests meant to analyze linear trend. An alpha level of .05 was used to determine statistical significance. The results of the study showed that: A majority of the respondents (graduates and students) rated the overall importance, effectiveness and quality of the teacher education programs as important, effective and good. Generally speaking there were only a few significant differences between the cohorts and groups related to the background variables (gender, age). The different cohorts were rating the quality of the programs very similarly but some differences between the cohorts were found in the importance and effectiveness ratings. Graduates of 2001 and 2002 rated the importance of the program significantly higher than 2000 graduates. The effectiveness of the programs was rated significantly higher by 2001 and 2003 graduates than other groups. In spite of these individual differences between cohorts there were no linear trends among the year cohorts in any measure. In respondents’ ratings of the effectiveness of teacher education programs there was significant difference between males and females; females rated it higher than males. There were no significant differences between males’ and females’ ratings of the importance and quality of programs. In the ratings there was only one difference between age groups. Older graduates (35 years or older) rated the importance of the teacher training significantly higher that 25-35 years old graduates. In graduates’ ratings there were positive but relatively low correlations between all variables related to importance, effectiveness and quality of Teacher Education Programs. Generally speaking students’ ratings about importance, effectiveness and quality of teacher education program were very positive. There was only one significant difference related to the background variables. Females rated higher the effectiveness of the program. The comparison of students’ and graduates’ perception about importance, effectiveness, and quality of teacher education programs showed that there were no significant differences between graduates and students in the overall ratings. However there were differences in some individual variables. Students rated higher in importance of “Continuous Professional Development”, effectiveness of “Critical Thinking Skills” and “Using Educational Technology” and quality of “Advice received from the advisor”. Graduates rated higher in importance of “Knowledge of Learning Environment” and effectiveness of “Continuous Professional Development”. According to the qualitative data of study 2 some graduates expressed that their perceptions have not changed about the importance, effectiveness, and quality of training that they received during their study time. They pointed out that teacher education programs have provided them the basic theoretical/formal knowledge and some training of practical routines. However, a majority of the teachers seems to have somewhat critical opinions about the teacher education. These teachers were not satisfied with teacher education programs because they argued that the programs failed to meet their practical demands in different everyday situations of the classroom e.g. in coping with students’ learning difficulties, multiprofessional communication with parents and other professional groups (psychologists and social workers), and classroom management problems. Participants also emphasized more practice oriented knowledge of subject matter, evaluation methods and teachers’ rights and responsibilities. Therefore, they (54.1% of participants) suggested that teacher education departments should provide more practice-based courses and programs as well as closer collaboration between regular schools and teacher education departments in order to fill gap between theory and practice.

Spend-analyysin toteuttaminen ja hyödyntäminen hankintatoimen kehittämisessä epäsuorien hankintojen osalta

Tutkimuksen tavoitteena oli selvittää, miten spend-analyysiä voidaan hyödyntää hankintatoimen kehittämisessä epäsuorien hankintojen osalta. Tutkimuksessa hyödynnettiin kohdeyrityksessä spend-analyysin toteuttamiseen kehitettyä työvälinettä, jonka avulla aikaa ja resursseja vievä datan kerääminen useista toiminnanohjausjärjestelmistä on saatu automatisoitua. Tutkimus suoritettiin toimintatutkimuksena, jonka lisäksi tietoa kohdeyrityksestä ja spend-analyysin käytöstä kerättiin kyselyillä. Kirjallisuutta tutkittiin niiltä osin, kun sen katsottiin tukevan tutkimusta. Tutkimuksen tuloksena havaittiin, että spend-analyysi luo pohjan hankintatoimen kehittämiselle. Spend-analyysiä voidaan hyödyntää hankintojen seuraamisessa, osana toimittajien hallinnointia, synergiaetujen löytämisessä, hankintojen hallinnoinnissa, kustannusten hallinnoinnissa, toiminnan suunnittelussa sekä suunnitelmien seurannassa, sopimusten noudattamisen seurannassa, kustannustietoisuuden parantamisessa sekä päätöksenteossa hyödynnettävän informaation tuottamiseksi. Lisäksi havaittiin, että kohdeyrityksessä käytössä olevaa työvälinettä voidaan kehittää spend-analyysin laadun parantamiseksi esimerkiksi yhdenmukaistamalla kirjauskäytäntöjä.

Materiaalin varaus globaalissa paperiteollisuuden järjestelmässä

Tärkeä osa paperiteollisuuden myyntitapahtumaa on tarkistaa tilatun tuotteen saatavuus ja toimittamisen aikataulu. Käytännössä tämä tarkoittaa kuljetusten, tuotannon ja valmistetun materiaalin tarkistamista. Tässä työssä on tehty olemassa olevan vapaan materiaalin tarkistaminen. Materiaalin tarkastus ei ole uusi idea, mutta kapasiteettivarauksen uudelleen toteutus on tehty tulevan ylläpitotyön helpottamiseksi ja järjestelmän suorituskyvyn parantamiseksi. Lisäksi uutta varauslogiikkaa pystytään käyttämään muissakin tuotannonohjausjärjestelmän ohjelmistoissa. Kapasiteettivaraukseen on myös rakennettu uusi kustannuspohjainen priorisointijärjestelmä, ja mietitty kuinka tätä olisi tulevaisuudessa helppo jalostaa. Erityishuomiota on kiinnitetty toiminnan läpinäkyvyyteen eli siihen, että tarkistuslogiikka kertoo syyt eri materiaalin hylkäämiseen. Työn yhteydessä on analysoitu materiaalivarauksen aiheuttamaa kuormaa järjestelmässä ja mietitty eri tekniikoita suorituskyvyn parantamiseksi.

Tuotetiedon soveltaminen varastotiedon hallinnan parantamisessa

Inventory data management is defined as an accurate creation and maintenance of item master data, inventory location data and inventory balances per an inventory location. The accuracy of inventory data is dependent of many elements of the product data management like the management of changes during a component’s life-cycle and the accuracy of product configuration in enterprise resource planning systems. Cycle-counting is counting of inventory balances per an inventory location and comparing them to the system data on a daily basis. The Cycle-counting process is a way to measure the accuracy of the inventory data in a company. Through well managed cycle-counting process a company gets a lot of information of their inventory data accuracy. General inaccuracy of the inventory data can’t be fixed through only assigning resources to the cycle-counting but the change requires disciplined following of the defined processes from all parties involved in updating inventory data through a component’s life-cycle. The Processes affecting inventory data are mapped and the appropriate metrics are defined in order to achieve better manageability of the inventory data. The Life-cycles of a single component and of a product are used in evaluation of the processes.

Kattilalaitosten järjestelmällinen suunnittelu ja modulaarinen rakenne

Tämän diplomityön tavoitteena on tutkia kattilalaitosten järjestelmällistä suunnittelua, huomioiden laitoksen elinkaariprosessit ja modulaarinen tuoterakenne. Kattilalaitokset investointituotteina toteutetaan tyypillisesti projektitoimintamallilla, jolloin jokainen toimitus suunnitellaan alusta kyseisen kohteen vaatimusten perusteella. Päätöksenteon peruste on laitosasiakkaiden osalta tyypillisesti hinta, jonkavuoksi laitoksen perusratkaisut tulee olla ennalta määriteltyjä ja toimitusprosessi huolellisesti suunniteltu, jotta kustannukset ja aikataulu ovat ennustettavissa. Projektitoimituksissa projektipäälliköllä on merkittävä vastuu myös suunnittelun onnistumisesta ja käytössä olevat projektinhallintamallit ovat hyvin tuotekeskeisiä, jolloin vaatimuksia ei riittävästi huomioida ja siten toteutettu laitosratkaisu ei täytä usein sidosryhmien asettamia vaatimuksia. Monimutkaisten järjestelmien kehittämiseen ja suunnitteluun on olemassa Systems Engineering - suunnittelumalli, jonka hyödyntäminen energiatekniikan alalla on ollut vielä vähäistä. Malli tarjoaa yhdessä ISO/ICE 15288 standardin kanssa valmiit prosessit tuotteen järjestelmälliselle suunnittelulle. Modulaariset tuoterakenteet ovat olleet perusvaatimus komponenttien toimitusten osalta, mutta laitosjärjestelmien tuotteistaminen on koettu vaikeaksi runsaan räätälöintitarpeen takia. Prosessimaisella toimintamallilla voidaan tuottaa modulaarisia tuoterakenteita ja tehostaa kattilalaitosten muutosten hallintaa. Tutkimuksessa tunnistettiin tyypilliset kattilalaitoksen suunnittelun prosessit kattilalaitosten kokonaistoimituksiin erikoistuneelle KPA Unicon Oy:lle.

Drivers and Barriers of Collaboration in the Value Chain of Paperboard-Packed Consumer Goods

Value chain collaboration has been a prevailing topic for research, and there is a constantly growing interest in developing collaborative models for improved efficiency in logistics. One area of collaboration is demand information management, which enables improved visibility and decrease of inventories in the value chain. Outsourcing of non-core competencies has changed the nature of collaboration from intra-enterprise to cross-enterprise activity, and this together with increasing competition in the globalizing markets have created a need for methods and tools for collaborative work. The retailer part in the value chain of consumer packaged goods (CPG) has been studied relatively widely, proven models have been defined, and there exist several best practice collaboration cases. The information and communications technology has developed rapidly, offering efficient solutions and applications to exchange information between value chain partners. However, the majority of CPG industry still works with traditional business models and practices. This concerns especially companies operating in the upstream of the CPG value chain. Demand information for consumer packaged goods originates at retailers' counters, based on consumers' buying decisions. As this information does not get transferred along the value chain towards the upstream parties, each player needs to optimize their part, causing safety margins for inventories and speculation in purchasing decisions. The safety margins increase with each player, resulting in a phenomenon known as the bullwhip effect. The further the company is from the original demand information source, the more distorted the information is. This thesis concentrates on the upstream parts of the value chain of consumer packaged goods, and more precisely the packaging value chain. Packaging is becoming a part of the product with informative and interactive features, and therefore is not just a cost item needed to protect the product. The upstream part of the CPG value chain is distinctive, as the product changes after each involved party, and therefore the original demand information from the retailers cannot be utilized as such – even if it were transferred seamlessly. The objective of this thesis is to examine the main drivers for collaboration, and barriers causing the moderate adaptation level of collaborative models. Another objective is to define a collaborative demand information management model and test it in a pilot business situation in order to see if the barriers can be eliminated. The empirical part of this thesis contains three parts, all related to the research objective, but involving different target groups, viewpoints and research approaches. The study shows evidence that the main barriers for collaboration are very similar to the barriers in the lower part of the same value chain; lack of trust, lack of business case and lack of senior management commitment. Eliminating one of them – the lack of business case – is not enough to eliminate the two other barriers, as the operational model in this thesis shows. The uncertainty of the future, fear of losing an independent position in purchasing decision making and lack of commitment remain strong enough barriers to prevent the implementation of the proposed collaborative business model. The study proposes a new way of defining the value chain processes: it divides the contracting and planning process into two processes, one managing the commercial parts and the other managing the quantity and specification related issues. This model can reduce the resistance to collaboration, as the commercial part of the contracting process would remain the same as in the traditional model. The quantity/specification-related issues would be managed by the parties with the best capabilities and resources, as well as access to the original demand information. The parties in between would be involved in the planning process as well, as their impact for the next party upstream is significant. The study also highlights the future challenges for companies operating in the CPG value chain. The markets are becoming global, with toughening competition. Also, the technology development will most likely continue with a speed exceeding the adaptation capabilities of the industry. Value chains are also becoming increasingly dynamic, which means shorter and more agile business relationships, and at the same time the predictability of consumer demand is getting more difficult due to shorter product life cycles and trends. These changes will certainly have an effect on companies' operational models, but it is very difficult to estimate when and how the proven methods will gain wide enough adaptation to become standards.

Strategiamenetelmän hyödyntäminen huonekaluliiketoiminnan kehittämisessä

Strategia on yrityksen toiminnan perusta. Perinteisillä toimialoilla ei välttämättä nähdä tavoitteellisen strategian tarpeellisuutta ja tärkeä strategiasuunnittelu jää toissijaiseksi. Löytämällä erottuva strategia omaa yritys kilpailuedun. Sinisen meren strategia on teoreettinen viitekehys luoda erilaistavaa liiketoimintaa. Strategian avulla voidaan tunnistaa ja luoda strategiaprofiili uudelle liiketoiminnalle jossa kilpailu ei tehnyt toiminnasta liian haavoittuvaista. Tämä nykytilanteen analysointiin ja siitä erilaistumiseen perustuva muutos voi liittyä itse tuotteeseen tai palveluun, sen tuotteistamiseen tai tuotteen jakelutien uudelleenasemointiin. Strategiatyön tarpeellisuus huonekalujen valmistamisessa ja myynnissä on muuttuvassa tilanteessa avainasemassa. Korkea valmistamisen kustannustaso ei mahdollista kilpailua edullisien tuontituotteiden kanssa ja korkeamman hintatason tuotteilla on toisaalta rajattu ostajakunta sisämarkkinoilla. Monelle toimijalle vientityön aloittaminen on riskialtis kustannuserä. Huonekaluteollisuudessa ja –jakeluteissä on ylikapasiteettia suhteessa kannattavaan liiketoimintaan. Erilaistavina markkinatekijöinä on pidetty hintaa molemmissa ääripäissä, laatua ja designiä. Hyvän jakelutien omaavat yritykset ovat hoitaneet valtakunnallisen myynnin karsien pienet toimijat alalta. Valmistuksessa innovatiivisuus perustuu lähinnä tehokkaaseen tuotantotekniikkaan, mikä osaltaan on nostanut investointien tasoa ja toteutuksen mielekkyyttä. Tuotteena huonekalu on kuitenkin teknisiltä ominaisuuksiltaan yleensä matala ja jo pienellä pääomalla on aloitettavissa tuotannollinen toiminta, mutta tällöin ei menestytä välttämättä tuottavuudessa. Uusina tekijöinä kompleksisessa tilanteessa on nähtävissä voimakkaasti tulossa oleva ympäristöarvojen suurempi huomioiminen. Näistä elementeistä voidaan etsiä strategiaprofiilin avulla uusia markkinarajapintoja, joissa kilpailutilanne mahdollistaa kannattavan liiketoiminnan. Työssä tutkitaan strategiamenetelmän hyödyntämismahdollisuutta, sen perusteita ja tarpeellisuutta perinteisen muutosjäykän teollisuudenalan ja kilpailtujen huonekalumarkkinoiden segmentissä. Uuden toimintamallin tarpeen, strategian, ymmärtämiseksi on tiedostettava ympäristössä tapahtuneet muutokset ja kartoitettava nykyinen strategiaprofiili. Tähän liittyen läpikäydään ne seikat jotka ovat aiheuttaneet nykytilanteen ja näin muutostarpeen tässä markkinassa.

Assessment of an information product project success: case business blueprint

The objective of this study was to find out how project success can be measured in a case where the output of a project is an intangible information product, what kind of framework can be used to evaluate the project success, and how the project assessment can be done in practice. As a case example, the success of a business blueprint project was assessed from the product point of view. A framework for assessing business blueprint project success was made based on a literature review. Furthermore, separate frameworks for measuring information product quality and project costs were developed. The theory of business blueprinting was discovered not to be firmly institutionalized and it is briefly covered in the thesis. The possible net benefits from the strategic business process harmonization were noted to be much more significant than the costs of the business blueprint project. The project was seen as a sufficient success from the viewpoint of the created output.

Creating Global Competitive Advantage by Global Product Technology Transfers

Globalization is the trend which is realized in all areas in today’s business world. Pressure for cost reduction, changes in market situation and available scale economies have changed business environment more global than ever. To respond to new situation, companies are establishing global strategies. In this thesis, available global competitive advantages in electrical machine industry are studied in context of gaining them by global technology transfers. In theory part, establishing global strategy and competitive advantage is considered with connection to global sourcing and supply chain management. Additionally, market development in 21st century and its impact on global strategies is studied. In practice, global manufacturing is enabled by technology transfer projects. Smooth and fast project implementation enables faster and more flexible production ramp up. By starting the production available competitive advantages can be realized. In this thesis the present situation of technology transfer projects and the risks and advantages related to global manufacturing are analyzed. The analysis of implemented technology transfer projects indicates that project implementation is in good level. For further development of project execution 10 minor suggestions could be presented with two major ones: higher level standardization and development of product information model to support better global manufacturing.