Euroopan yhteisö ja maailman kansallisvaltiot

Alkuperäinen artikkeli : Daedalus 122 (1993) 3 s. 115-140.

The Present State and a Development Plan of Cost Accounting in Batch Production of Wind Turbine Gears

The aim of this master’s thesis was to document the present state and to create a development plan for Moventas Wind’s cost accounting. The current cost accounting system was evaluated and most fundamental problems were chosen as areas of focus in development work. The development plan includes both short- and long-term development proposals for problems identified. This report presents two alternative models for product costing. Benchmarking of cost accounting practices and modern cost accounting theories were used in development of cost accounting. It was found that the current cost accounting system functions quite well and the adjustments in unit cost rate calculation have only a minor influence on costs of goods sold. An OEE-based standard cycle concept was also developed and it was found that the implementation of this new system is worthwhile in the long-term.

The state of research and development in Australia: implications for future development

The scale of research and development (R&D), and other technological activities, and the way in which the available resources are managed and organized at the enterprise and national level contribute to the rate of technological change in a country. A well organized national innovation system can be a powerful engine of progress, whereas a lack of interaction between institutions results in the slowing down of technological change, thereby diminishing its contribution to economic growth and welfare. The research object of this thesis is Australia’s national innovation system and the state of R&D in Australia. In order to establish an overall picture of the situation and to be able to make recommendations for future development, the general level of R&D activity and the main performers and funders of R&D within the system are analyzed. The framework policies supporting R&D and prevalent dynamics between different actors and sectors are of specific interest of the research. The findings reveal that the Australian culture is not a culture of research and innovation and that the main challenge is building a coherent system with strong domestic and international linkages.

Outsourcing and Offshore Software Development in Africa

Globalization of software today is making many companies in the industrialized nations to outsource their work to low-wage countries. This thesis aims at obtaining an initial general overview of offshore software development in Africa. It seeks to explore the state of offshore software outsourcing in Africa with a focus on the factors contributing to the successes and challenges of offshore software development practicesin Africa. The thesis made use of electronic questionnaires and voice interviews to collect the data. Identified African vendors were interviewed, and the data was analyzed qualitatively. The study found that theAfrican software outsourcing industry is still at its infancy. It is expected that the industry will grow. However, a lot needs to be done, and African governments are called upon to actively implement supportive infrastructures that will promote the growth of the local and export software industries. Further research is recommended to cover the wide context ofthe topic.

Exploration of the social dimension of corporate responsibility in a welfare state

This study focuses on corporate social responsibility (or CSR)as the latest dimension to emerge in the corporate responsibility and sustainability agenda, which in the recent past has rapidly risen to the top of the list of concerns for civil societies worldwide. Despite the continuing debates and discussions about the scope, benefits, and impacts of CSR to business and community in various sectors, levels, and types of society, many companies have moved forward to confront the opportunities and challenges of CSR. Thus, this study is about those proactive companies with a focus on the importance of CSR and its management inside and outside the company. It is an exploration and learning from the experience of Finnish companies, as well as other actors interested or involved in shaping the course of CSR, locally and globally. It also looks closely at how national culture affects the views, thinking, and management of CSR in a welfare state. This dissertation primarily draws on the analyses of information collected from a series of qualitative interviews and the existing literature in the area. This is complemented by an analysis of written and published documents on CSR from various sources. The results of the study give insightful information and detailed descriptions of a roadmap useful in learning and understanding CSR in Finnish companies. Despite the varying conceptual connotations, essential roadmap indicators point to the importance of framing CSR within the corporate responsibility concept, Finnish development and the welfare state system, globalization, stakeholders, and the pursuit of sustainable development as the main drivers of CSR, the remarkable progress of CSR in companies, and identification of key management areas and practices relevant to CSR. Similarly,the study reveals the importance of culture as essential in understanding and learning CSR. Finnish culture has a positive influence on the views, thinking, and management practices of CSR issues. Such a positive influence of culture, therefore, makes it easy for business people to discuss and understand CSR, because those CSR issues are already considered common and taken-for-granted by Finns and are implicit in the welfare state provisions. The experience of Finnish companies in implementing CSR policies in the supply chain is a concrete proactive step in advancing the message of CSR, that is, to bring companies and suppliers together to work on improving and strengthening relationships towards socially responsible practices worldwide. Such a forward step to deal with CSR issues in the supply chain reflects the companies' commitments and belief that CSR can be managed with the suppliers and gain positive benefits. Despite the problems and complexities, particularly in the global supply chain, managing CSR for Finnish companies presents new opportunities and challenges that are expected to intensify in the near future. The focus on CSR policy implementation inthe supply chain points to the importance of companies taking initiatives and forging cooperation with suppliers with the aim of addressing and improving CSR questions in the supply chains. The proactive stance of Finnish companies toward CSR is complemented by the active supporting role of important societalactors such as the government and NGOs. These actors carry out various promotional efforts and campaigns, thus bringing CSR into the mainstream of Finnish companies and strengthening the synergistic learning about CSR within the Finnish business and civil circles. The efforts of the government and NGOs to promote CSR are indicative of the importance of multipartite involvement and the emergence of better civil regulations. Likewise, their drive to learn from each other, exchange experiences, and contribute in CSR debates facilitated the evolution of CSRnetworks in the country. The results of this study add to the mounting evidence that CSR, in general, has created a new dimension in managing corporate sustainability. This study provides compelling empirical evidence and some direct quotations about CSR in the Finnish context. This information can be used to learn and gain new useful insights, approaches, and concepts for managing CSR.

Physical layer development in third generation protocol software architecture

Diplomityön tavoitteena oli kehittää kolmannen sukupolven fyysistä protokollakerrosta matkapuhelimen ohjelmistoarkkitehtuurille. Kolmannen sukupolven matkapuhelinjärjestelmät ovat aikaisempia järjestelmiä monimutkaisempia. Ohjelmiston koon ja monimutkaisuuden sekä aikataulujen kiireellisyyden vuoksi on tullut tarve ottaa käyttöön formaaleja menetelmiä ohjelmiston kehitystyöhön. Formaalit kuvauskielet mahdollistavat tarkan, yksiselitteisen ja simuloitavissa olevan järjestelmäkuvauksen muodostamisen. Fyysinen protokollakerros tarjoaa tiedon siirtoa ylemmille protokollakerroksille. Tämän tiedonsiirron hallinta vaatii protokollakerrosten välistä viestinvälitystä. Formaaleja kuvauskieliä käyttämällä voidaan viestinvälityksen toteutusta automatisoida ja siinä tarvittavaa logiikkaa havainnollistaa. Työssä suunniteltiin, toteutettiin ja testattiin ylempien protokollakerrosten kanssa kommunikoivaa osaa fyysisestä protokollakerroksesta. Tuloksena saatiin solunvalintatoiminnallisuuden vaatiman kommunikoinnin ja tilakoneen toteutus ohjelmistoarkkitehtuurissa. Ohjelmistonkehityksen alkuvaiheiden havaittiin olevan fyysisen kerroksen suorituskyvyn kannalta merkittävässä asemassa, koska tällöin viestinvälityksen optimointi on helpointa. Formaalit kuvauskielet eivät ole sellaisenaan täysin soveltuvia tarkoin määritellyn ohjelmistoarkkitehtuurin osien kehitykseen.

Development of e-Service tools for customer services and processes, Case: KONE Oyj Finland

Tutkimuksen tavoitteena oli selvittää miten kehittää yrityksen nykyistä e-palvelujärjestelmää, Internet -teknologiaan perustuvaa sähköisiä kommunikaatio- ja tiedonjakojärjestelmää, yrityksen business-to-business asiakkuuksien johtamisessa. Tavoitteena oli myös luoda ehdotukset uusista e-palvelusopimusmalleista. Tutkimuksen teoriaosuudessa pyrittiin kehittämään aikaisempiin tutkimuksiin, tietokirjallisuuteen ja asiantuntijoihin perustuva viitekehysmalli. Empiirisessä osassa tutkimuksen tavoitteisiin pyrittiin haastattelemalla yrityksen asiakkaita ja henkilöstöä, sekä tarkastelemalla asiakaskontaktien nykyistä tilaa ja kehittymistä. Näiden tietojen perusteella selvitettiin e-palvelun käyttäjien tarpeita, profiilia ja valmiuksia palvelun käyttöön sekä palvelun nykyistä houkuttelevuutta. Tutkimuksen teoriaosan lähdeaineistona käytettiin kirjallisuutta, artikkeleita ja tilastoja asiakashallinnasta sekä e-palveluiden, erityisesti Internet ja verkkopalveluiden markkinoinnista, nykytilasta sekä palveluiden kehittämisestä. Lisäksi tutkittiin kirjallisuutta arvoverkostoanalyysistä, asiakkaan arvosta, informaatioteknologiasta, palvelun laadusta ja asiakastyytyväisyydestä. Tutkimuksen empiirinen osa perustuu yrityksen henkilöstöltä sekä asiakkailta haastatteluissa kerättyihin tietoihin, yrityksen ennalta keräämiin materiaaleihin sekä Taloustutkimuksen keräämiin tietoihin. Tutkimuksessa käytettiin case -menetelmää, joka oli yhdistelmä sekä kvalitatiivista että kvantitatiivista tutkimusta. Casen tarkoituksena oli testata mallin paikkansapitävyyttä ja käyttökelpoisuutta, sekä selvittää onko olemassa vielä muita tekijöitä, jotka vaikuttavat asiakkaan saamaan arvoon. Kvalitatiivinen aineisto perustuu teemahaastattelumenetelmää soveltaen haastateltuihin asiakkaisiin ja yrityksen työntekijöihin. Kvantitatiivinen tutkimus perustuu Taloustutkimuksen tutkimukseen ja yrityksen asiakaskontakteista kerättyyn tietoon. Haastatteluiden perusteella e-palvelut nähtiin hyödyllisinä ja tulevaisuudessa erittäin tärkeinä. E-palvelut nähdään yhtenä tärkeänä kanavana, perinteisten kanavien rinnalla, tehostaa business-to-business -asiakkuuksien johtamista. Tutkimuksen antamien tulosten mukaan asiakkaiden palveluun liittyvän tieto-, taito-, tarpeellisuus- ja kiinnostavuustasojen vaihtelevaisuus osoittaa selvän tarpeen eritasoisille e-palvelupaketti ratkaisuille. Tuloksista muodostettu ratkaisuehdotus käsittää neljän eri e-palvelupaketin rakentamisen asiakkaiden eri tarpeita mukaillen.

Development of an investor relations strategy - Case SSH Communications Security Corp. Communications Security Corp.

Tutkimuksen tavoitteena oli muodostaa viitekehys sijoittajaviestinnän strategian muodostamiseen ja soveltaa viitekehystä käytännössä. Tutkimusongelma nousi case-yrityksestä, SSH Communications Security Oyj:stä, joka listautui vuoden 2000 lopussa. Teoreettinen viitekehys perustuu aikaisempaan kirjallisuuteen sijoittajaviestinnästä, strategian kehittämisestä ja rahoitusteoriasta. Rahoitusteorian alueet, joita käsiteltiin tutkimuksessa ovat; vapaaehtoinen tiedottaminen, markkinatehokkuus ja agenttiteoria. Tutkimuksen empiirinen osa toteutettiin soveltamalla teoreettista viitekehystä case yritykseen. Empiirisessä osuudessa käytiin läpi seuraavat vaiheet; nykyisen tilan ulkoinen ja sisäinen analyysi, tavoitteiden asettaminen ja sijoittajaviestintä strategia ehdotuksen muodostaminen case yritykseen. Tutkielman viimeinen kappale kokoaa tärkeimmät löydökset, pohtii työn teoreettista kontribuutiota ja liikkeenjohdollisia kytköksiä sekä esittää tutkimuksen herättämiä ehdotuksia jatkotutkimuksille

Improving Evaluation and Development Capability in Verification and Validation

Validation and verification operations encounter various challenges in product development process. Requirements for increasing the development cycle pace set new requests for component development process. Verification and validation usually represent the largest activities, up to 40 50 % of R&D resources utilized. This research studies validation and verification as part of case company's component development process. The target is to define framework that can be used in improvement of the validation and verification capability evaluation and development in display module development projects. Validation and verification definition and background is studied in this research. Additionally, theories such as project management, system, organisational learning and causality is studied. Framework and key findings of this research are presented. Feedback system according of the framework is defined and implemented to the case company. This research is divided to the theory and empirical parts. Theory part is conducted in literature review. Empirical part is done in case study. Constructive methode and design research methode are used in this research A framework for capability evaluation and development was defined and developed as result of this research. Key findings of this study were that double loop learning approach with validation and verification V+ model enables defining a feedback reporting solution. Additional results, some minor changes in validation and verification process were proposed. There are a few concerns expressed on the results on validity and reliability of this study. The most important one was the selected research method and the selected model itself. The final state can be normative, the researcher may set study results before the actual study and in the initial state, the researcher may describe expectations for the study. Finally reliability of this study, and validity of this work are studied.

Cuticular and Suberin Polymers of Edible Plants. Analysis by Gas Chromatographic-Mass Spectrometric and Solid State Spectroscopic Methods

Cutin and suberin are structural and protective polymers of plant surfaces. The epidermal cells of the aerial parts of plants are covered with an extracellular cuticular layer, which consists of polyester cutin, highly resistant cutan, cuticular waxes and polysaccharides which link the layer to the epidermal cells. A similar protective layer is formed by a polyaromatic-polyaliphatic biopolymer suberin, which is present particularly in the cell walls of the phellem layer of periderm of the underground parts of plants (e.g. roots and tubers) and the bark of trees. In addition, suberization is also a major factor in wound healing and wound periderm formation regardless of the plants’ tissue. Knowledge of the composition and functions of cuticular and suberin polymers is important for understanding the physiological properties for the plants and for nutritional quality when these plants are consumed as foods. The aims of the practical work were to assess the chemical composition of cuticular polymers of several northern berries and seeds and suberin of two varieties of potatoes. Cutin and suberin were studied as isolated polymers and further after depolymerization as soluble monomers and solid residues. Chemical and enzymatic depolymerization techniques were compared and a new chemical depolymerization method was developed. Gas chromatographic analysis with mass spectrometric detection (GC-MS) was used to assess the monomer compositions. Polymer investigations were conducted with solid state carbon-13 cross polarization magic angle spinning nuclear magnetic resonance spectroscopy (13C CP-MAS NMR), Fourier transform infrared spectroscopy (FTIR) and microscopic analysis. Furthermore, the development of suberin over one year of post-harvest storage was investigated and the cuticular layers from berries grown in the North and South of Finland were compared. The results show that the amounts of isolated cuticular layers and cutin monomers, as well as monomeric compositions vary greatly between the berries. The monomer composition of seeds was found to differ from the corresponding berry peel monomers. The berry cutin monomers were composed mostly of long-chain aliphatic ω-hydroxy acids, with various mid-chain functionalities (double-bonds, epoxy, hydroxy and keto groups). Substituted α,ω-diacids predominated over ω-hydroxy acids in potato suberin monomers and slight differences were found between the varieties. The newly-developed closed tube chemical method was found to be suitable for cutin and suberin analysis and preferred over the solvent-consuming and laborious reflux method. Enzymatic hydrolysis with cutinase was less effective than chemical methanolysis and showed specificity towards α,ω-diacid bonds. According to ₁₃C CP-MAS NMR and FTIR, the depolymerization residues contained significant amounts of aromatic structures, polysaccharides and possible cutan-type aliphatic moieties. Cultivation location seems to have effect on cuticular composition. The materials studied contained significant amounts of different types of biopolymers that could be utilized for several purposes with or without further processing. The importance of the so-called waste material from industrial processes of berries and potatoes as a source of either dietary fiber or specialty chemicals should be further investigated in detail. The evident impact of cuticular and suberin polymers, among other fiber components, on human health should be investigated in clinical trials. These by-product materials may be used as value-added fiber fractions in the food industry and as raw materials for specialty chemicals such as lubricants and emulsifiers, or as building blocks for novel polymers.

Distribution development in global business environment

The purpose of this master’s thesis was to analyze a case company’s distribution and its elements. With different distribution structure options a customer can be served with different ways. However, cost elements and service elements create different trade-offs. In this work the case company’s distribution’s present state was analyzed and conclusions were made. Based on these conclusions different alternatives for distribution were created. These different alternatives were analyzed through simulations and with more traditional calculations to compose the total operative costs of each alternative. Also other aspects were considered, such as required organizational changes and the possible better customer service. With the suggested 3-stock distribution structure shorter delivery times and possibly more punctual deliveries for products kept in stock could be achieved with the same operative costs as in current direct delivery model. Also, similar benefits could be achieved with other products with the 3-stock model.

Mental Well-being at Work. A Sign of a Healthy Organisation and a Necessary Precondition for Organisational Development

One of the aims of the study was to clarify the reliability and validity of the Job Diagnostic Survey (JDS) and the Eigenzustand (EZ) method as measures of the objective characteristics of work and short-term mental work load in the Finnish data. The reliability and validity were examined taking into consideration the theoretical backgrounds of the methods and the reliability of the measurements. The methods were used for finding out the preconditions for organisational development based on self-improvement and clarifying the impacts of working environment (organisational functioning and job characteristics) on a worker’s mental state and health. The influences were examined on a general level - regardless of individual personal or specific contextual factors. One aim was also to clarify how cognitions and emotions are intertwined and how they influence a person’s perception of the working environment. The data consisted of 15 blue-collar organisations in the public sector. The organisations were divided in target and comparison groups depending on the research frames. The data was collected by questionnaires by post. The exploratory and confirmatory factor analyses (Lisrel) were used as the main statistical methods in examining the structures of the methods and impacts between the variables. It was shown that it is possible for organisations to develop their working conditions themselves on specific preconditions. The advance of the development processes could be shown by the amount of the development activity as well as by the changes of the mental well-being (ability to act) and sick absenteeism of the personnel. It was found that the JDS and the EZ methods were reliable and valid measures in the Finnish data. It was shown that, in addition to the objective working environment (organisational functioning and job characteristics), also such a personal factor as selfesteem influences a person’s perception of mental work load. However, the influence did not seem to be direct. The importance of job satisfaction as a general indicator of perceived working conditions was emphasised. Emotional and cognitive factors were found to be functionally intertwined constituting a common factor. Organisational functioning and the characteristics of work had connections with a person’s health measured by sick absenteeism.

Corporate Social Responsibility in the Oil and Gas Industry: Environmental Management Systems as a Source of Sustainable Development

The environmental aspect of corporate social responsibility (CSR) expressed through the process of the EMS implementation in the oil and gas companies is identified as the main subject of this research. In the theoretical part, the basic attention is paid to justification of a link between CSR and environmental management. The achievement of sustainable competitive advantage as a result of environmental capital growth and inclusion of the socially responsible activities in the corporate strategy is another issue that is of special significance here. Besides, two basic forms of environmental management systems (environmental decision support systems and environmental information management systems) are explored and their role in effective stakeholder interaction is tackled. The most crucial benefits of EMS are also analyzed to underline its importance as a source of sustainable development. Further research is based on the survey of 51 sampled oil and gas companies (both publicly owned and state owned ones) originated from different countries all over the world and providing reports on sustainability issues in the open access. To analyze their approach to sustainable development, a specifically designed evaluation matrix with 37 indicators developed in accordance with the General Reporting Initiative (GRI) guidelines for non-financial reporting was prepared. Additionally, the quality of environmental information disclosure was measured on the basis of a quality – quantity matrix. According to results of research, oil and gas companies prefer implementing reactive measures to the costly and knowledge-intensive proactive techniques for elimination of the negative environmental impacts. Besides, it was identified that the environmental performance disclosure is mostly rather limited, so that the quality of non-financial reporting can be judged as quite insufficient. In spite of the fact that most of the oil and gas companies in the sample claim the EMS to be embedded currently in their structure, they often do not provide any details for the process of their implementation. As a potential for the further development of EMS, author mentions possible integration of their different forms in a single entity, extension of existing structure on the basis of consolidation of the structural and strategic precautions as well as development of a unified certification standard instead of several ones that exist today in order to enhance control on the EMS implementation.

Development of a measuring-control system for energy monitoring in low power

In this thesis a control system for an intelligent low voltage energy grid is presented, focusing on the control system created by using a multi-agent approach which makes it versatile and easy to expand according to the future needs. The control system is capable of forecasting the future energy consumption and decisions making on its own without human interaction when countering problems. The control system is a part of the St. Petersburg State Polytechnic University’s smart grid project that aims to create a smart grid for the university’s own use. The concept of the smart grid is interesting also for the consumers as it brings new possibilities to control own energy consumption and to save money. Smart grids makes it possible to monitor the energy consumption in real-time and to change own habits to save money. The intelligent grid also brings possibilities to integrate the renewable energy sources to the global or the local energy production much better than the current systems. Consumers can also sell their extra power to the global grid if they want.

The Present State and Future Prospects of a Manpower Pool as Part of Project Business

This research focused on operation of a manpower pool within a service business unit in Company X and aimed to identify how the operation should be improved in order to get most out of it concerning the future prospects of the service business unit. This was done by analyzing the current state of the manpower pool related operations in means of project business, project management and business models. The objective was to deepen the understanding and to highlight possible areas of improvement. The research was conducted as a qualitative single-case study utilizing also an action research method; the research approach was a combination of conceptual, action-oriented and constructive approaches. The primary data was collected with executing a comprehensive literature review and semi-structured theme interviews. The main results described how the manpower pool operates as part of the service business unit in project business by participating in different types of delivery projects; process flows for the project types were mapped. Project management was analyzed especially from the resource management point of view, and an Excel-based skills analysis model was constructed for this purpose. Utilization of operational business models was also studied to define strategic direction for development activities. The results were benchmarked against two competitors in order to specify lessons to be learnt from their use of operational business models.