Defining a framework model to determine total costs of managed desktops using ITIL best practices

In modern day organizations there are an increasing number of IT devices such as computers, mobile phones and printers. These devices can be located and maintained by using specialized IT management applications. Costs related to a single device accumulate from various sources and are normally categorized as direct costs like hardware costs and indirect costs such as labor costs. These costs can be saved in a configuration management database and presented to users using web based development tools such as ASP.NET. The overall costs of IT devices during their lifecycle can be ten times higher than the actual purchase price of the product and ability to define and reduce these costs can save organizations noticeable amount of money. This Master’s Thesis introduces the research field of IT management and defines a custom framework model based on Information Technology Infrastructure Library (ITIL) best practices which is designed to be implemented as part of an existing IT management application for defining and presenting IT costs.

Mobile Subscription Acquisition and Retention Costs - An Actvity-Based Model

The objective of this master’s thesis was to develop a model for mobile subscription acquisition cost, SAC, and mobile subscription retention cost, SRC, by applying activity-based cost accounting principles. The thesis was conducted as a case study for a telecommunication company operating on the Finnish telecommunication market. In addition to activity-based cost accounting there were other theories studied and applied in order to establish a theory framework for this thesis. The concepts of acquisition and retention were explored in a broader context with the concepts of customer satisfaction, loyalty and profitability and eventually customer relationship management to understand the background and meaning of the theme of this thesis. The utilization of SAC and SRC information is discussed through the theories of decision making and activity-based management. Also, the present state and future needs of SAC and SRC information usage at the case company as well as the functions of the company were examined by interviewing some members of the company personnel. With the help of these theories and methods it was aimed at finding out both the theory-based and practical factors which affect the structure of the model. During the thesis study it was confirmed that the existing SAC and SRC model of the case company should be used as the basis in developing the activity-based model. As a result the indirect costs of the old model were transformed into activities and the direct costs were continued to be allocated directly to acquisition of new subscriptions and retention of old subscriptions. The refined model will enable managing the subscription acquisition, retention and the related costs better through the activity information. During the interviews it was found out that the SAC and SRC information is also used in performance measurement and operational and strategic planning. SAC and SRC are not fully absorbed costs and it was concluded that the model serves best as a source of indicative cost information. This thesis does not include calculating costs. Instead, the refined model together with both the theory-based and interview findings concerning the utilization of the information produced by the model will serve as a framework for the possible future development aiming at completing the model.

Toimintojen kuormitusten mallintaminen ja toimintolaskennan käyttöönottomahdollisuudet kokoonpanokonepajassa

Työn tavoitteena oli kehittää yrityksen liiketoimintaprosessikuvausta, mallintaa eräiden siinä esitettyjen toimintoryhmien ja yksittäisten toimintojen kuormitukset sekä tutkia toimintolaskennan käyttöönottomahdollisuuksia yrityksessä. Työssä on tuotu esille kapasiteettiin ja resursseihin liittyviä käsitteitä, kuten kapasiteettipäätösten ajoitus, resurssitarvesuunnittelu ja resurssien kohdistaminen. Työssä on myös tarkasteltu perinteisen kustannuslaskennan ja toimintolaskennan välisiä eroja. Aiempaa tutkimustietoa on käytetty asetettujen tavoitteiden saavuttamiseen. Liiketoimintaprosessikuvausta on muokattu vastaamaan paremmin yrityksen nykyistä rakennetta. Toimintojen kuormitukset on mallinnettu liiketoimintaprosessikuvauksesta ja kyselyistä saadun tiedon perusteella. Toimintolaskennan käyttöönottomahdollisuuksien arviointiperusteena on käytetty toimintolaskennan laskennallista toteutettavuutta yrityksessä. Työn ensimmäinen tulos on yksinkertaisempi ja monikäyttöisempi liiketoimintaprosessikuvaus, jota voidaan käyttää henkilöstöhallinnossa ja yrityksen toiminnan kehittämiseen. Toinen tulos on kuormitusmalli, jota voidaan käyttää muun muassa tulevaisuuden kapasiteettitarpeen arvioimiseen. Työnkolmas tulos on analyysi toimintolaskennan käyttöönottomahdollisuuksista ja työnumeroperusteisen kustannusten kohdistamisen periaatteet.

Kunnossapidosta aiheutuvien epäsuorien kustannusten, laatuvaikutusten ja tuotannon toteutumattomien tuottojen liiketaloudellinen vaikutus

Työn tavoitteena on selvittää välillisten kunnossapitokustannusten rakennetta, selkeyttää kunnossapitokonseptin myyntiä ja luoda benchmarking- työkalu kunnossapitoliiketoiminnan jatkuvaan kehittämiseen. Kunnossapidon palvelukonseptin tarjoamiseen liittyen tutkimuksessa kartoitetaan kunnossapidon asiakkaan näkemyksiä kunnossapidon vaikutuksista asiakkaan edustamassa organisaatiossa, jolloin voidaan saada työkaluja kunnossapitotuotteiden ja kunnossapitokonseptien edelleen kehittämiseksi paremmin asiakkaan tarpeita tyydyttävään suuntaan ja näin nostaa asiakkaan ostaman palvelun laatua ja saada tuotetuksi lisäarvoa asiakkaalle. Tutkimuksen perusteella voidaan todeta kunnossapidon vaikutuksen yrityksen talouteen ja menestykseen olevan huomattava. Kun tarkastellaan kunnossapitoa vain välittömien kustannusten osalta, ei yrityksen toimintoja voida optimoida tehokkaimman mahdollisen toiminnan mahdollistavalla tavalla. Kunnossapito voidaan siis kehittää aidosti lisäarvoa tuottavaksi palveluksi, kun saadaan epäsuoria kustannuksia asteittain vähennetyksi.

Profitability Analysis of Service Contracts of Devices

The objective of this study has been to make a profitability analysis of service contracts for a company in Finland. The purpose has been to see how profitable the contracts are and if there possibly were some things to change or develop in the contracts. Allocation rules of cost accounting, service costs both profitability and management of services have been considered in the theory part. All the service contracts that have been valid at least three last accounting periods have been included in the study. All direct costs relating to the contracts have been collected and indirect costs have been assigned to the contracts. Profitability of the contracts has been calculated over three years. Results have been analyzed according to the key figures the company is controlling. Some suggestions for developments have been given at the end of the study. The study has shown differences between the contracts. Part of them has turned out to be like the profitability aims of the company and part less profitable. The study has shown that many factors have an effect on the profitability of the service contracts.

Konekohtaiset kunnossapidon kustannukset ohutlevy-yrityksessä

Diplomityön tavoitteena on laskea kohdeyrityksen tehtaan koneiden kunnossapidosta aiheutuvat kustannukset. Koneiden kunnossapidon kustannusten laskemisen lisäksi työn aikana laaditaan kunnossapidon kustannusten kuukausittainen raportti sekä tehdään kunnossapitoa helpottava ohjelma. Kunnossapidon kustannukset jaotellaan kahteen osaan, jotka ovat välittömät ja välilliset kustannukset. Työn teoriaosassa käydään läpi kustannuslaskentaa, kunnossapidon teoriaa sekä kapasiteetin riittävyyttä. Empiriaosassa esitellään kohdeyritys ja kunnossapidon nykytila. Tämän jälkeen käydään läpi koneiden kunnossapidon kustannusten laskentamalli ja kunnossapitojärjestelmä. Esittelyjen jälkeen analysoidaan työn tuloksia ja ehdotetaan muutamia kehitysvaihtoehtoja. Diplomityön tuloksista on huomattavissa, että kohdeyrityksen tehtaan koneiden kunnossapidon kustannukset ovat pääasiassa välittömiä kustannuksia. Koneiden kunnossapidon kustannusten selvittäminen toi esille kustannusten vaikutuksen eri tuotteisiin, niiden omakustannusarvoihin ja katteisiin. Joidenkin tuotteiden katteet muuttuivat jopa negatiivisiksi. Vaikka kunnossapidon konekohtaiset kustannukset saadaan pysymään samana, kehittämällä tuotantoa voidaan vähentää merkittävästi tuotekohtaisia kunnossapidon kustannuksia.

Comparing service contract prices of outsourcing partner

The main objective of this Master’s thesis is to find out which one of the two pricing models is the most cost-effective. In this thesis there are two companies that have made an outsourcing contract, in which they have a possibility to choose between two different pricing models. The first model is so called FTE (Full Time Employee) -based. The total cost will be based on the amount of outsourced person-workyears. The second pricing model is the transaction-based, in which the price will be formed according to the amount of transactions. Changing the pricing model from FTE-based to the transaction-based will also incur other costs. It is very important that these other costs are also taken into consideration, so that it is possible to determine the total costs of the pricing models. These other costs are direct costs, indirect costs and performance related costs of outsourcing. Activity based-costing (ABC) was used in order to find out the trues indirect costs of the outsourced processes. Performance related costs are related to quality, so Pareto-analysis was used to analyse the costs. Based on all of that, a framework for service related cost analysis was developed. Quality costs were almost impossible to quantify, so quality had to be taken into consideration in a qualitative way. Furthermore, considering only the indirect and direct costs in a quantitative way and quality costs in a qualitative way, it was possible to find a conditional solution for the research question.

Palvelutasopoikkeamariskin kustannusvaikutusten määrittäminen tietoliikennepalveluiden tuotannossa

Tutkimuksen päämääränä oli selvittää laadullisin menetelmin millaisia kustannusvaikutuksia laajavaikutteiset palvelutasopoikkeamat, eli erilaiset viat tai häiriöt tietoliikennepalveluissa aiheuttavat kohdeyrityksen tietoliikennepalveluiden tuotannossa. Tutkimus muistutti lähtökohdiltaan paljolti riskianalyysia, sillä sen tavoitteina oli tunnistaa merkittävimmät palvelutasopoikkeamien aiheuttajat, arvioida palvelutasopoikkeaman kustannusvaikutuksia ja pohtia millaisin toimin ja kustannuksin palvelutasopoikkeamia voitaisiin ehkäistä. Tutkimusongelmaa lähestyttiin jakamalla palvelutasopoikkeaman kustannusvaikutukset viankorjauksesta aiheutuviin välittömiin ja asiakasvaikutusten kautta mahdollisesti syntyviin välillisiin kustannuksiin. Välillisiä kustannuksia aiheuttaviksi ilmiöiksi tunnistettiin palvelukatkon aiheuttama liikennetulomenetys, nykyisten tai potentiaalisten asiakkaiden menettäminen ja nykyisten asiakkaiden alentunut ostohalukkuus. Yhteenvetona tutkimuksessa tehtyihin havaintoihin perustuen välilliset kustannukset eivät osoittautuneet niin merkittäviksi kuin tutkimuksen aloitusvaiheessa oletettiin, mutta lisätutkimus aiheesta voi olla perusteltua.

Economic Burden of Psoriasis

Psoriasis may cause a substantial economic burden to patients, health service providers, third parties, and the society as a whole. However, all of these costs may not be adequately considered when assessing the treatment costs for psoriasis. Psoriasis may negatively affect work productivity as psoriasis has a relatively high incidence in working age people that lead to possible costs because of lost productivity. The aims of this thesis were to estimate the economic burden of psoriasis particularly from patients’ and health service providers’ perspectives and to estimate the background factors (e.g., severity of psoriasis) that may have led to high costs. Another aim was to estimate the total medication costs and to estimate psoriasis’ proportion of health-related productivity losses. The patient sample was based on patients with psoriasis who visited the Department of Dermatology in Turku University Hospital during a one-year study period. These patients were sent a questionnaire. From the patients who gave consent, medication information, clinical information, and number of visits to Turku University Hospital were collected. This data was linked to the information from the questionnaire. Overall psoriasis was estimated to cause a substantial economic burden for the patient, health service provider, health insurance system, employer, and the society as a whole. The direct costs represented only a small proportion of the overall financial burden of psoriasis, whereas indirect costs were significant. The estimated annual costs for patients and employers were almost twice the costs to health service providers or the Social Insurance Institution of Finland. In conclusion, the cost contribution of patients and employers should be considered when assessing the costs of different treatments, in addition to commonly studied direct costs of medications and costs to health service providers. Methods used to assess these costs should be well justified and be described clearly to allow comparisons between studies and to evaluate the quality of the results.

Asiakasarvon kehittäminen B2B-palveluyrityksessä

Yritysten välisen yhteistyön toimittajavalinta perustuu asiakasarvon määrittämiseen ja vertailuun. Tämä tutkimus tehtiin yritys A:lle asiakasarvon ymmärtämiseksi, kehittämiseksi ja asiakaspääoman kasvattamiseksi. Teoreettisesti keskeisiä käsiteltäviä teemoja ovat asiakasarvon luonti, toimittaminen ja kasvattaminen. Tutkimus on toteutettu pääasiassa kvalitatiivisesti teemahaastattelun kautta, jossa haastateltiin viittä yritys A:n asiakasyritystä. Tutkimus suunniteltiin yhdessä työn tilanneen yrityksen kanssa suhteessa aiempiin tutkimuksiin ja tavoitteisiin. Tutkimuksen tuloksissa havaittiin selviä vahvuuksia liittyen yritys A:n asiakasyritysten asiakasarvon teemoihin. Vahvuudet liittyivät muun muassa suoriin kustannuksiin, erillisiin lisäpalveluihin ja asiakaspalveluun. Kehitettävät teemat liittyivät pääasiassa työn suorittamiseen ja markkinointiin. Tulokset ovat käsitelty niin numeerisesti kuin tärkeimpinä teemoina. Asiakasarvoon ja –pääomaan liittyvistä teemoista esitetään lopuksi ratkaisuehdotus työn tilanneelle yritykselle, jota voidaan hyödyntää jatkossa ko. johtamisessa. Asiakasarvosta tulisi tehdä niin yrityskohtaisesti kuin tieteen kannalta lisää tutkimusta, sillä siinä on onnistuessaan merkittävä liiketoiminnallinen potentiaali.

Direct-on-line axial flux permanent magnet synchronous generator static and dynamic performance

In distributed energy production, permanent magnet synchronous generators (PMSG) are often connected to the grid via frequency converters, such as voltage source line converters. The price of the converter may constitute a large part of the costs of a generating set. Some of the permanent magnet synchronous generators with converters and traditional separately excited synchronous generators couldbe replaced by direct-on-line (DOL) non-controlled PMSGs. Small directly networkconnected generators are likely to have large markets in the area of distributed electric energy generation. Typical prime movers could be windmills, watermills and internal combustion engines. DOL PMSGs could also be applied in island networks, such as ships and oil platforms. Also various back-up power generating systems could be carried out with DOL PMSGs. The benefits would be a lower priceof the generating set and the robustness and easy use of the system. The performance of DOL PMSGs is analyzed. The electricity distribution companies have regulations that constrain the design of the generators being connected to the grid. The general guidelines and recommendations are applied in the analysis. By analyzing the results produced by the simulation model for the permanent magnet machine, the guidelines for efficient damper winding parameters for DOL PMSGs are presented. The simulation model is used to simulate grid connections and load transients. The damper winding parameters are calculated by the finite element method (FEM) and determined from experimental measurements. Three-dimensional finite element analysis (3D FEA) is carried out. The results from the simulation model and 3D FEA are compared with practical measurements from two prototype axial flux permanent magnet generators provided with damper windings. The dimensioning of the damper winding parameters is case specific. The damper winding should be dimensioned based on the moment of inertia of the generating set. It is shown that the damper winding has optimal values to reach synchronous operation in the shortest period of time after transient operation. With optimal dimensioning, interferenceon the grid is minimized.

Position sensorless electrically excited synchronous motor drive for industrial use based on direct flux linkage and torque control

Synchronous machines with an AC converter are used mainly in large drives, for example in ship propulsion drives as well as in rolling mill drives in steel industry. These motors are used because of their high efficiency, high overload capacity and good performance in the field weakening area. Present day drives for electrically excited synchronous motors are equipped with position sensors. Most drives for electrically excited synchronous motors will be equipped with position sensors also in future. This kind of drives with good dynamics are mainly used in metal industry. Drives without a position sensor can be used e.g. in ship propulsion and in large pump and blower drives. Nowadays, these drives are equipped with a position sensor, too. The tendency is to avoid a position sensor if possible, since a sensor reduces the reliability of the drive and increases costs (latter is not very significant for large drives). A new control technique for a synchronous motor drive is a combination of the Direct Flux Linkage Control (DFLC) based on a voltage model and a supervising method (e.g. current model). This combination is called Direct Torque Control method (DTC). In the case of the position sensorless drive, the DTC can be implemented by using other supervising methods that keep the stator flux linkage origin centered. In this thesis, a method for the observation of the drift of the real stator flux linkage in the DTC drive is introduced. It is also shown how this method can be used as a supervising method that keeps the stator flux linkage origin centered in the case of the DTC. In the position sensorless case, a synchronous motor can be started up with the DTC control, when a method for the determination of the initial rotor position presented in this thesis is used. The load characteristics of such a drive are not very good at low rotational speeds. Furthermore, continuous operation at a zero speed and at a low rotational speed is not possible, which is partly due to the problems related to the flux linkage estimate. For operation in a low speed area, a stator current control method based on the DFLC modulator (DMCQ is presented. With the DMCC, it is possible to start up and operate a synchronous motor at a zero speed and at low rotational speeds in general. The DMCC is necessary in situations where high torque (e.g. nominal torque) is required at the starting moment, or if the motor runs several seconds at a zero speed or at a low speed range (up to 2 Hz). The behaviour of the described methods is shown with test results. The test results are presented for the direct flux linkage and torque controlled test drive system with a 14.5 kVA, four pole salient pole synchronous motor with a damper winding and electric excitation. The static accuracy of the drive is verified by measuring the torque in a static load operation, and the dynamics of the drive is proven in load transient tests. The performance of the drive concept presented in this work is sufficient e.g. for ship propulsion and for large pump drives. Furthermore, the developed methods are almost independent of the machine parameters.

Lightweight, liquid-cooled, direct-drive generator for highpower wind turbines: motivation, concept, and performance

Thesis: A liquid-cooled, direct-drive, permanent-magnet, synchronous generator with helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit offers an excellent combination of attributes to reliably provide economic wind power for the coming generation of wind turbines with power ratings between 5 and 20MW. A generator based on the liquid-cooled architecture proposed here will be reliable and cost effective. Its smaller size and mass will reduce build, transport, and installation costs. Summary: Converting wind energy into electricity and transmitting it to an electrical power grid to supply consumers is a relatively new and rapidly developing method of electricity generation. In the most recent decade, the increase in wind energy’s share of overall energy production has been remarkable. Thousands of land-based and offshore wind turbines have been commissioned around the globe, and thousands more are being planned. The technologies have evolved rapidly and are continuing to evolve, and wind turbine sizes and power ratings are continually increasing. Many of the newer wind turbine designs feature drivetrains based on Direct-Drive, Permanent-Magnet, Synchronous Generators (DD-PMSGs). Being low-speed high-torque machines, the diameters of air-cooled DD-PMSGs become very large to generate higher levels of power. The largest direct-drive wind turbine generator in operation today, rated just below 8MW, is 12m in diameter and approximately 220 tonne. To generate higher powers, traditional DD-PMSGs would need to become extraordinarily large. A 15MW air-cooled direct-drive generator would be of colossal size and tremendous mass and no longer economically viable. One alternative to increasing diameter is instead to increase torque density. In a permanent magnet machine, this is best done by increasing the linear current density of the stator windings. However, greater linear current density results in more Joule heating, and the additional heat cannot be removed practically using a traditional air-cooling approach. Direct liquid cooling is more effective, and when applied directly to the stator windings, higher linear current densities can be sustained leading to substantial increases in torque density. The higher torque density, in turn, makes possible significant reductions in DD-PMSG size. Over the past five years, a multidisciplinary team of researchers has applied a holistic approach to explore the application of liquid cooling to permanent-magnet wind turbine generator design. The approach has considered wind energy markets and the economics of wind power, system reliability, electromagnetic behaviors and design, thermal design and performance, mechanical architecture and behaviors, and the performance modeling of installed wind turbines. This dissertation is based on seven publications that chronicle the work. The primary outcomes are the proposal of a novel generator architecture, a multidisciplinary set of analyses to predict the behaviors, and experimentation to demonstrate some of the key principles and validate the analyses. The proposed generator concept is a direct-drive, surface-magnet, synchronous generator with fractional-slot, duplex-helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit to accommodate liquid coolant flow. The novel liquid-cooling architecture is referred to as LC DD-PMSG. The first of the seven publications summarized in this dissertation discusses the technological and economic benefits and limitations of DD-PMSGs as applied to wind energy. The second publication addresses the long-term reliability of the proposed LC DD-PMSG design. Publication 3 examines the machine’s electromagnetic design, and Publication 4 introduces an optimization tool developed to quickly define basic machine parameters. The static and harmonic behaviors of the stator and rotor wheel structures are the subject of Publication 5. And finally, Publications 6 and 7 examine steady-state and transient thermal behaviors. There have been a number of ancillary concrete outcomes associated with the work including the following. X Intellectual Property (IP) for direct liquid cooling of stator windings via an embedded coaxial coolant conduit, IP for a lightweight wheel structure for lowspeed, high-torque electrical machinery, and IP for numerous other details of the LC DD-PMSG design X Analytical demonstrations of the equivalent reliability of the LC DD-PMSG; validated electromagnetic, thermal, structural, and dynamic prediction models; and an analytical demonstration of the superior partial load efficiency and annual energy output of an LC DD-PMSG design X A set of LC DD-PMSG design guidelines and an analytical tool to establish optimal geometries quickly and early on X Proposed 8 MW LC DD-PMSG concepts for both inner and outer rotor configurations Furthermore, three technologies introduced could be relevant across a broader spectrum of applications. 1) The cost optimization methodology developed as part of this work could be further improved to produce a simple tool to establish base geometries for various electromagnetic machine types. 2) The layered sheet-steel element construction technology used for the LC DD-PMSG stator and rotor wheel structures has potential for a wide range of applications. And finally, 3) the direct liquid-cooling technology could be beneficial in higher speed electromotive applications such as vehicular electric drives.

Omnibus accounts to Finnish investors? – An analysis of the costs and benefits that omnibus account structure brings to Finnish account operators and investors

The Finnish Securities Markets are being harmonized to enable better, more reliable and timely settlement of securities. Omnibus accounts are a common practice in the European securities markets. Finland forbids the use of omnibus accounts from its domestic investors. There is a possibility that the omnibus account usage is allowed for Finnish investors in the future. This study aims to build a comprehensive image to Finnish investors and account operators in determining the costs and benefits that the omnibus account structure would have for them. This study uses qualitative research methods. A literature review provides the framework for this study. Different kinds of research articles, regulatory documents, studies performed by European organisations, and Finnish news reportages are used to analyse the costs and benefits of omnibus accounts. The viewpoint is strictly of account operators and investors, and different effects on them are contemplated. The results of the analysis show that there are a number of costs and benefits that investors and account operators must take into consideration regarding omnibus accounts. The costs are related to development of IT-systems so that participants are able to adapt to the new structure and operate according to its needs. Decrease in the holdings’ transparency is a disadvantage of the structure and needs to be assessed precisely to avoid some problems it might bring. Benefits are mostly related to the increased competition in the securities markets as well as to the possible cost reductions of securities settlement. The costs and benefits were analysed according to the study plan of this thesis and as a result, the significance and impact of omnibus accounts to Finnish investors and account operators depends on the competition level and the decisions that all market participants make when determining if the account structure is beneficial for their operations.

Voiko totuutta tavoittaa? : direct cinema -tyylisuunnan käyttö dokumenttielokuvassa

The subject of this study is the use of direct cinema style in documentary film. The main purpose of this thesis was to the research the ways in which direct cinema style attempts to show and achieve truth in documentary films. The following questions were posed: Is it possible to depict reality in a documentary film; how does the choice of using this style affect the final documentary? The essential purpose of this study was to try to see whether the direct cinema style works when trying to achieve truth in a documentary film. This work consints of two elements, the theoretical part and the short documentary. The theoretical part deals with the history, the truth, and the direct cinema- style in documentaries. The theoretical information of direct cinema has been used when making the short documentary. In the documentary Tuloaula 2 I have studied the way in which using direct cinema -style works in practise. The documentary has followed as strictly as possible the direct cinema style. I was the director, the cameraman and the editor of my documentary film. In the documentary film Tuloaula 2 it appeared that the direct cinema style works best when filming everyday life. By using this style it is easy for the director to observe and leave his own persona in the background. The strength in using the direct cinema style is that it enables the viewer to build his/her own impression on the subject. Even though the direct cinema style aims to achieve objectivity the director has to make numerous subjective choices during both the filming and the editing process. These subjective choices automatically effect the "truth" of the documentary film. The difficulty in a direct cinema style is the large amount of material. This often leads to a long editing phase, which is not often possible in the busy production schedules. The direct cinema style is not at its best when shooting people who are passive because their attention often focuses too much on the camera. In general, the best way to make a documentary film would be to use many documentary styles in one film and not to srictly concentrate on only one style.