Enhancing Physics Education in the National Defence University : A design based research approach in the production of learning material

This research is connected with an education development project for the four-year-long officer education program at the National Defence University. In this curriculum physics was studied in two alternative course plans namely scientific and general. Observations connected to the later one e.g. student feedback and learning outcome gave indications that action was needed to support the course. The reform work was focused on the production of aligned course related instructional material. The learning material project produced a customized textbook set for the students of the general basic physics course. The research adapts phases that are typical in Design Based Research (DBR). The research analyses the feature requirements for physics textbook aimed at a specific sector and frames supporting instructional material development, and summarizes the experiences gained in the learning material project when the selected frames have been applied. The quality of instructional material is an essential part of qualified teaching. The goal of instructional material customization is to increase the product's customer centric nature and to enhance its function as a support media for the learning process. Textbooks are still one of the core elements in physics teaching. The idea of a textbook will remain but the form and appearance may change according to the prevailing technology. The work deals with substance connected frames (demands of a physics textbook according to the PER-viewpoint, quality thinking in educational material development), frames of university pedagogy and instructional material production processes. A wide knowledge and understanding of different frames are useful in development work, if they are to be utilized to aid inspiration without limiting new reasoning and new kinds of models. Applying customization even in the frame utilization supports creative and situation aware design and diminishes the gap between theory and practice. Generally, physics teachers produce their own supplementary instructional material. Even though customization thinking is not unknown the threshold to produce an entire textbook might be high. Even though the observations here are from the general physics course at the NDU, the research gives tools also for development in other discipline related educational contexts. This research is an example of an instructional material development work together the questions it uncovers, and presents thoughts when textbook customization is rewarding. At the same time, the research aims to further creative customization thinking in instruction and development. Key words: Physics textbook, PER (Physics Education Research), Instructional quality, Customization, Creativity

Confucian education and enlightenment for the masses in the manner of Guwen guanzhi

The topic of this study is the most renowned anthology of essays written in Literary Chinese, Guwen guanzhi, compiled and edited by Wu Chengquan (Chucai) and Wu Dazhi (Diaohou), and first published during the Qing dynasty, in 1695. Because of the low social standing of the compilers, their anthology remained outside the recommended study materials produced by members of the established literati and used for preparing students in the imperial civil-service examinations. However, since the end of the imperial era, Guwen guanzhi has risen to a position as the classical anthology par excellence. Today it is widely used as required or supplementary reading material of Literary Chinese in middle-schools both in Mainland China and on Taiwan. The goal of this study is to explain the persistent longevity of the anthology. So far, Guwen guanzhi has not been a topic of any published academic study, and the opinions expressed on it in various sources are widely discrepant. Through a comparative study with a dozen classical Chinese anthologies in use during the early Qing dynasty, this study reveals the extent to which the compilers of Guwen guanzhi modelled their work after other selections. Altogether 86 % of the texts in Guwen guanzhi originate from another Qing era anthology, Guwen xiyi, often copied character by character. However, the notes and commentaries are all different. Concentrating on the special characteristics unique to Guwen guanzhi—the commentaries and certain peculiarities in the selection of texts—this study then discusses the possible reasons for the popularity of Guwen guanzhi over the competing readers during the Qing era. Most remarkably, Guwen guanzhi put in practise the equalitarian, educational ideals of the Ming philosopher Wang Shouren (Yangming). Thus Guwen guanzhi suited the self-enlightenment needs of the ”subordinate classes”, in particular the rising middle-class comprised mainly of merchants. The lack of moral teleology, together with the compact size, relative comprehensiveness of the selection and good notes and comments, have made Guwen guanzhi well suited for the new society since the abolition of the imperial examination system. Through a content analysis, based on a sample of the texts, this study measures the relative emphasis on centralism and localism (both in concrete and spiritual terms) expressed in the texts of Guwen guanzhi. The analysis shows that the texts manifest some bias towards emphasising innate virtue on the expense of state-defined moral. This may reflect hidden critique towards intellectual oppression by the centralised imperial rule. During the early decades of the Qing era, such critique was often linked to Ming-loyalism. Finally, this study concludes that the kind of ”spiritual localism” that Guwen guanzhi manifests gives it the potential to undermine monolithic orthodoxy even in today’s Chinese societies. This study has progressed hand in hand with the translation of a selection of texts from Guwen guanzhi into Finnish, published by Gaudeamus Helsinki University Press: Jadekasvot – Valittuja tarinoita Kiinan muinaisajoilta (2005), Jadelähde – Valittuja kirjoituksia Kiinan keskiajalta (2007) and Jadepeili – Valittuja kirjoituksia keisarillisen Kiinan kulta-ajoilta (2008). All translations are critical editions, complete with extensive notation. The trilogy is the first comprehensive translation based on Guwen guanzhi in a European language.

Agreement Patterns in English : Diachronic Corpus Studies on Common-Number Pronouns

This study reports a diachronic corpus investigation of common-number pronouns used to convey unknown or otherwise unspecified reference. The study charts agreement patterns in these pronouns in various diachronic and synchronic corpora. The objective is to provide base-line data on variant frequencies and distributions in the history of English, as there are no previous systematic corpus-based observations on this topic. This study seeks to answer the questions of how pronoun use is linked with the overall typological development in English and how their diachronic evolution is embedded in the linguistic and social structures in which they are used. The theoretical framework draws on corpus linguistics and historical sociolinguistics, grammaticalisation, diachronic typology, and multivariate analysis of modelling sociolinguistic variation. The method employs quantitative corpus analyses from two main electronic corpora, one from Modern English and the other from Present-day English. The Modern English material is the Corpus of Early English Correspondence, and the time frame covered is 1500-1800. The written component of the British National Corpus is used in the Present-day English investigations. In addition, the study draws supplementary data from other electronic corpora. The material is used to compare the frequencies and distributions of common-number pronouns between these two time periods. The study limits the common-number uses to two subsystems, one anaphoric to grammatically singular antecedents and one cataphoric, in which the pronoun is followed by a relative clause. Various statistical tools are used to process the data, ranging from cross-tabulations to multivariate VARBRUL analyses in which the effects of sociolinguistic and systemic parameters are assessed to model their impact on the dependent variable. This study shows how one pronoun type has extended its uses in both subsystems, an increase linked with grammaticalisation and the changes in other pronouns in English through the centuries. The variationist sociolinguistic analysis charts how grammaticalisation in the subsystems is embedded in the linguistic and social structures in which the pronouns are used. The study suggests a scale of two statistical generalisations of various sociolinguistic factors which contribute to grammaticalisation and its embedding at various stages of the process.

Original Pirate Material : Translating Justin Somper's Demons of the Ocean

Tutkielma käsittelee suomentamani Vampiraatit: Kirottujen laiva -nuortenromaanin käännösprosessia. Materiaalina on kustantajalle toimittamani näytekäännös, joka käsittää yhden kokonaisen luvun ja lisäksi kirjan tapahtumiin keskeisesti liittyvän runon. Molemmista tarkastellaan sekä lopullisia, julkaistuja versioita että ensimmäisiä raakaversioita. Julkaistut versiot ovat osa varsinaista tutkielmaa, raakaversiot ja lähtötekstit puolestaan on sisällytetty mukaan liitteinä. Tarkastelunäkökulmani on pääosin deskriptiivinen ja kontrastiivinen. Proosa-analyysi jakautuu kahteen osaan. Ensimmäisessä osassa tutkin tapoja, joilla käännökseni vastustaa ns. lisääntyvän standardisoitumisen lakia (the law of growing standardization), jota Gideon Toury on ehdottanut yleispäteväksi käännöslaiksi. Touryn laki ennustaa, että käännökset ovat useimmiten tyylillisesti alkuteoksiaan latteampia. Esimerkkini kuitenkin osoittavat, että kääntäjän on mahdollista valita ratkaisunsa niin, että latistumiselta vältytään, ainakin silloin, kun lähtöteksti on melko suoraviivaista. Proosa-analyysin jälkimmäinen osa keskittyy käännöksen muokkaamiseen. Vertaan siinä näytekäännös-luvun ensimmäistä versiota julkaistuun versioon ja tutkin muun muassa sitä, missä määrin ensimmäinen versio sisältää lähtökielen interferenssiä, ts. missä määrin englannille tyypilliset rakenteet paistavat siitä läpi. Tarkastelun kohteena ovat myös kohdekieliset kömpelyydet ja niiden poistaminen sekä pienet mutta kokonaisuuden kannalta tärkeät tyylilliset muutokset. Esimerkeistä käy selvästi ilmi kääntämisen prosessimainen luonne. Käännösnäytteeseen sisältyneen runon suomentaminen oli oma erillinen kokonaisuutensa. Tässä osiossa vertailen lähtötekstiä, raakaversiota ja julkaistua käännöstä rinnakkain säkeistö säkeistöltä. Tarkastelussa painottuvat edelleen tekstin muokkaaminen ja hiominen. Analyysien taustaksi esittelen lyhyesti alkuteoksen ja sen kirjoittajan Justin Somperin. Kuvailen myös omaa käännösfilosofiaani ja esittelen kaksi siihen voimakkaasti vaikuttanutta suomentajaa.

Luova mieli : lähikuvassa muusikoiden luomisprosessit

This work studied the creative process of musicians. The subject was chosen partly due to the attention given to creativity in social discussion. The approach was material-based, because during the work it became clear that the theoretical models describing the creative process in general did not provide adequate tools for the examination of musical creation. In this study, the creative process was defined as a process, which generated a work found by the musician novel to him or her. There were two principal research questions: 1) How does the creative process of musicians progress? 2) What makes a process creative? The main emphasis was on the first question, because the study aimed at modeling the creative process of musicians. The material for this study was collected by interviewing five professional musicians, each qualified by an expert of music to be creative. The interviews were thematically linked with each musician’s recently implemented creative process. The work generated in the process was used as a stimulant in the interview. The main themes of the interview dealt with the musician’s concrete action, cognitive functioning and affective experience during the process. Secondary themes included his or her goals as well as the factors that enhanced or inhibited the process. A material-based analysis was made of the interviews. The conceptualization and modelling of the creative process was founded on a phenomenological-hermeneutic interpretation. In addition to the primary interviews, also supplementary interviews were made in order to ensure that the description of the musician was understood correctly. Further supplementary interviews were made when the material was analyzed and results were deduced. This aimed at increasing the reliability of interpretations and conclusions. The study resulted in a four-level model representing the progress of a creative process. The levels were defined by means of the conception of state. The levels used in defining the process were 1) the state determining the potential of the process, 2) the state delimiting the process, 3) the state orienting the process, and 4) the state determined by the process. The progress of the process was described as changes taking place in the state. It was discovered that the factors having an effect on the creativity of the process were the dynamism of the process, the musician’s work in relation to his or her inner standard and the impulses that caused variation in the musician’s thinking. The interview method used in this study proved to be a very suitable tool in an examination of a creative process. Thus it may well be applicable in other research contexts associated with creative processes. The outcome of this study, the model of the progress of a creative process, should also provide a feasible basis for the examination of different kinds of creative processes. It enables a comprehensive examination of a creative process, simultaneously justifying the dynamic nature of the process.

Drug Analysis without Primary Reference Standards : Application of LC-TOFMS and LC-CLND to Biofluids and Seized Material

Drug Analysis without Primary Reference Standards: Application of LC-TOFMS and LC-CLND to Biofluids and Seized Material Primary reference standards for new drugs, metabolites, designer drugs or rare substances may not be obtainable within a reasonable period of time or their availability may also be hindered by extensive administrative requirements. Standards are usually costly and may have a limited shelf life. Finally, many compounds are not available commercially and sometimes not at all. A new approach within forensic and clinical drug analysis involves substance identification based on accurate mass measurement by liquid chromatography coupled with time-of-flight mass spectrometry (LC-TOFMS) and quantification by LC coupled with chemiluminescence nitrogen detection (LC-CLND) possessing equimolar response to nitrogen. Formula-based identification relies on the fact that the accurate mass of an ion from a chemical compound corresponds to the elemental composition of that compound. Single-calibrant nitrogen based quantification is feasible with a nitrogen-specific detector since approximately 90% of drugs contain nitrogen. A method was developed for toxicological drug screening in 1 ml urine samples by LC-TOFMS. A large target database of exact monoisotopic masses was constructed, representing the elemental formulae of reference drugs and their metabolites. Identification was based on matching the sample component s measured parameters with those in the database, including accurate mass and retention time, if available. In addition, an algorithm for isotopic pattern match (SigmaFit) was applied. Differences in ion abundance in urine extracts did not affect the mass accuracy or the SigmaFit values. For routine screening practice, a mass tolerance of 10 ppm and a SigmaFit tolerance of 0.03 were established. Seized street drug samples were analysed instantly by LC-TOFMS and LC-CLND, using a dilute and shoot approach. In the quantitative analysis of amphetamine, heroin and cocaine findings, the mean relative difference between the results of LC-CLND and the reference methods was only 11%. In blood specimens, liquid-liquid extraction recoveries for basic lipophilic drugs were first established and the validity of the generic extraction recovery-corrected single-calibrant LC-CLND was then verified with proficiency test samples. The mean accuracy was 24% and 17% for plasma and whole blood samples, respectively, all results falling within the confidence range of the reference concentrations. Further, metabolic ratios for the opioid drug tramadol were determined in a pharmacogenetic study setting. Extraction recovery estimation, based on model compounds with similar physicochemical characteristics, produced clinically feasible results without reference standards.

TlBr raw material purification, crystal growth, annealing, detector fabrication and characterisation for gamma-ray detector applications

The research reported in this thesis dealt with single crystals of thallium bromide grown for gamma-ray detector applications. The crystals were used to fabricate room temperature gamma-ray detectors. Routinely produced TlBr detectors often are poor quality. Therefore, this study concentrated on developing the manufacturing processes for TlBr detectors and methods of characterisation that can be used for optimisation of TlBr purity and crystal quality. The processes under concern were TlBr raw material purification, crystal growth, annealing and detector fabrication. The study focused on single crystals of TlBr grown from material purified by a hydrothermal recrystallisation method. In addition, hydrothermal conditions for synthesis, recrystallisation, crystal growth and annealing of TlBr crystals were examined. The final manufacturing process presented in this thesis deals with TlBr material purified by the Bridgman method. Then, material is hydrothermally recrystallised in pure water. A travelling molten zone (TMZ) method is used for additional purification of the recrystallised product and then for the final crystal growth. Subsequent processing is similar to that described in the literature. In this thesis, literature on improving quality of TlBr material/crystal and detector performance is reviewed. Aging aspects as well as the influence of different factors (temperature, time, electrode material and so on) on detector stability are considered and examined. The results of the process development are summarised and discussed. This thesis shows the considerable improvement in the charge carrier properties of a detector due to additional purification by hydrothermal recrystallisation. As an example, a thick (4 mm) TlBr detector produced by the process was fabricated and found to operate successfully in gamma-ray detection, confirming the validity of the proposed purification and technological steps. However, for the complete improvement of detector performance, further developments in crystal growth are required. The detector manufacturing process was optimized by characterisation of material and crystals using methods such as X-ray diffraction (XRD), polarisation microscopy, high-resolution inductively coupled plasma mass (HR-ICPM), Fourier transform infrared (FTIR), ultraviolet and visual (UV-Vis) spectroscopy, field emission scanning electron microscope (FESEM) and energy-dispersive X-ray spectroscopy (EDS), current-voltage (I-V) and capacity voltage (CV) characterisation, and photoconductivity, as well direct detector examination.

Conservation of Atlantic salmon by supplementary stocking of juvenile fish

Wild salmon stocks in the northern Baltic rivers became endangered in the second half of the 20th century, mainly due to recruitment overfishing. As a result, supplementary stocking was widely practised, and supplementation of the Tornionjoki salmon stock took place over a 25 year period until 2002. The stock has been closely monitored by electrofishing, smolt trapping, mark-recapture studies, catch samples and catch surveys. Background information on hatchery-reared stocked juveniles was also collected for this study. Bayesian statistics was applied to the data as this method offers the possibility of bringing prior information into the analysis and an advanced ability for incorporating uncertainty, and also provides probabilities for a multitude of hypotheses. Substantial divergences between reared and wild Tornionjoki salmon were identified in both demographic and phenological characteristics. The divergences tended to be larger the longer the duration spent in hatchery and the more favourable the hatchery conditions were for fast growth. Differences in environment likely induced most of the divergences, but selection of brood fish might have resulted in genotypic divergence in maturation age of reared salmon. Survival of stocked 1-year old juveniles to smolt varied from about 10% to about 25%. Stocking on the lower reach of the river seemed to decrease survival, and the negative effect of stocking volume on survival raises the concern of possible similar effects on the extant wild population. Post-smolt survival of wild Tornionjoki smolts was on average two times higher than that of smolts stocked as parr and 2.5 times higher than that of stocked smolts. Smolts of different groups showed synchronous variation and similar long-term survival trends. Both groups of reared salmon were more vulnerable to offshore driftnet and coastal trapnet fishing than wild salmon. Average survival from smolt to spawners of wild salmon was 2.8 times higher than that of salmon stocked as parr and 3.3 times higher than that of salmon stocked as smolts. Wild salmon and salmon stocked as parr were found to have similar lifetime survival rates, while stocked smolts have a lifetime survival rate over 4 times higher than the two other groups. If eggs are collected from the wild brood fish, stocking parr would therefore not be a sensible option. Stocking smolts instead would create a net benefit in terms of the number of spawners, but this strategy has serious drawbacks and risks associated with the larger phenotypic and demographic divergences from wild salmon. Supplementation was shown not to be the key factor behind the recovery of the Tornionjoki and other northern Baltic salmon stocks. Instead, a combination of restrictions in the sea fishery and simultaneous occurrence of favourable natural conditions for survival were the main reasons for the revival in the 1990 s. This study questions the effectiveness of supplementation as a conservation management tool. The benefits of supplementation seem at best limited. Relatively high occurrences of reared fish in catches may generate false optimism concerning the effects of supplementation. Supplementation may lead to genetic risks due to problems in brood fish collection and artificial rearing with relaxed natural selection and domestication. Appropriate management of fisheries is the main alternative to supplementation, without which all other efforts for long-term maintenance of a healthy fish resource fail.

Evaluation of the Biocompatibility of Poly (ortho ester), Copolymer of ε-caprolactone/D,L-lactide and the Composite of Copolymer of ε-caprolactone/D,L-lactide and Tricalciumphosphate as Bone Filling Material

The purpose of this series of studies was to evaluate the biocompatibility of poly (ortho) ester (POE), copolymer of ε-caprolactone and D,L-lactide [P (ε-CL/DL-LA)] and the composite of P(ε-CL/DL-LA) and tricalciumphosphate (TCP) as bone filling material in bone defects. Tissue reactions and resorption times of two solid POE-implants (POE 140 and POE 46) with different methods of sterilization (gamma- and ethylene oxide sterilization), P(ε-CL/DL-LA)(40/60 w/w) in paste form and 50/50 w/w composite of 40/60 w/w P(ε-CL/DL-LA) and TCP and 27/73 w/w composite of 60/40 w/w P(ε-CL/DL-LA) and TCP were examined in experimental animals. The follow-up times were from one week to 52 weeks. The bone samples were evaluated histologically and the soft tissue samples histologically, immunohistochemically and electronmicroscopically. The results showed that the resorption time of gamma sterilized POE 140 was eight weeks and ethylene oxide sterilized POE 140 13 weeks in bone. The resorption time of POE 46 was more than 24 weeks. The gamma sterilized rods started to erode from the surface faster than ethylene oxide sterilized rods for both POEs. Inflammation in bone was from slight to moderate with POE 140 and moderate with POE 46. No highly fluorescent layer of tenascin or fibronectin was found in the soft tissue. Bone healing at the sites of implantation was slower than at control sites with the copolymer in small bone defects. The resorption time for the copolymer was over one year. Inflammation in bone was mostly moderate. Bone healing at the sites of implantation was also slower than at the control sites with the composite in small and large mandibular bone defects. Bone formation had ceased at both sites by the end of follow-up in large mandibular bone defects. The ultrastructure of the connective tissue was normal during the period of observation. It can be concluded that the method of sterilization influenced the resorption time of both POEs. Gamma sterilized POE 140 could have been suitable material for filling small bone defects, whereas the degradation times of solid EO-sterilized POE 140 and POE 46 were too slow to be considered as bone filling material. Solid material is difficult to contour, which can be considered as a disadvantage. The composites were excellent to handle, but the degradation time of the polymer and the composites were too slow. Therefore, the copolymer and the composite can not be recommended as bone filling material.

Interatomic potentials for fusion reactor material simulations

Fusion energy is a clean and safe solution for the intricate question of how to produce non-polluting and sustainable energy for the constantly growing population. The fusion process does not result in any harmful waste or green-house gases, since small amounts of helium is the only bi-product that is produced when using the hydrogen isotopes deuterium and tritium as fuel. Moreover, deuterium is abundant in seawater and tritium can be bred from lithium, a common metal in the Earth's crust, rendering the fuel reservoirs practically bottomless. Due to its enormous mass, the Sun has been able to utilize fusion as its main energy source ever since it was born. But here on Earth, we must find other means to achieve the same. Inertial fusion involving powerful lasers and thermonuclear fusion employing extreme temperatures are examples of successful methods. However, these have yet to produce more energy than they consume. In thermonuclear fusion, the fuel is held inside a tokamak, which is a doughnut-shaped chamber with strong magnets wrapped around it. Once the fuel is heated up, it is controlled with the help of these magnets, since the required temperatures (over 100 million degrees C) will separate the electrons from the nuclei, forming a plasma. Once the fusion reactions occur, excess binding energy is released as energetic neutrons, which are absorbed in water in order to produce steam that runs turbines. Keeping the power losses from the plasma low, thus allowing for a high number of reactions, is a challenge. Another challenge is related to the reactor materials, since the confinement of the plasma particles is not perfect, resulting in particle bombardment of the reactor walls and structures. Material erosion and activation as well as plasma contamination are expected. Adding to this, the high energy neutrons will cause radiation damage in the materials, causing, for instance, swelling and embrittlement. In this thesis, the behaviour of a material situated in a fusion reactor was studied using molecular dynamics simulations. Simulations of processes in the next generation fusion reactor ITER include the reactor materials beryllium, carbon and tungsten as well as the plasma hydrogen isotopes. This means that interaction models, {\it i.e. interatomic potentials}, for this complicated quaternary system are needed. The task of finding such potentials is nonetheless nearly at its end, since models for the beryllium-carbon-hydrogen interactions were constructed in this thesis and as a continuation of that work, a beryllium-tungsten model is under development. These potentials are combinable with the earlier tungsten-carbon-hydrogen ones. The potentials were used to explain the chemical sputtering of beryllium due to deuterium plasma exposure. During experiments, a large fraction of the sputtered beryllium atoms were observed to be released as BeD molecules, and the simulations identified the swift chemical sputtering mechanism, previously not believed to be important in metals, as the underlying mechanism. Radiation damage in the reactor structural materials vanadium, iron and iron chromium, as well as in the wall material tungsten and the mixed alloy tungsten carbide, was also studied in this thesis. Interatomic potentials for vanadium, tungsten and iron were modified to be better suited for simulating collision cascades that are formed during particle irradiation, and the potential features affecting the resulting primary damage were identified. Including the often neglected electronic effects in the simulations was also shown to have an impact on the damage. With proper tuning of the electron-phonon interaction strength, experimentally measured quantities related to ion-beam mixing in iron could be reproduced. The damage in tungsten carbide alloys showed elemental asymmetry, as the major part of the damage consisted of carbon defects. On the other hand, modelling the damage in the iron chromium alloy, essentially representing steel, showed that small additions of chromium do not noticeably affect the primary damage in iron. Since a complete assessment of the response of a material in a future full-scale fusion reactor is not achievable using only experimental techniques, molecular dynamics simulations are of vital help. This thesis has not only provided insight into complicated reactor processes and improved current methods, but also offered tools for further simulations. It is therefore an important step towards making fusion energy more than a future goal.

Multiscale study on hydrogen mobility in metallic fusion divertor material

For achieving efficient fusion energy production, the plasma-facing wall materials of the fusion reactor should ensure long time operation. In the next step fusion device, ITER, the first wall region facing the highest heat and particle load, i.e. the divertor area, will mainly consist of tiles based on tungsten. During the reactor operation, the tungsten material is slowly but inevitably saturated with tritium. Tritium is the relatively short-lived hydrogen isotope used in the fusion reaction. The amount of tritium retained in the wall materials should be minimized and its recycling back to the plasma must be unrestrained, otherwise it cannot be used for fueling the plasma. A very expensive and thus economically not viable solution is to replace the first walls quite often. A better solution is to heat the walls to temperatures where tritium is released. Unfortunately, the exact mechanisms of hydrogen release in tungsten are not known. In this thesis both experimental and computational methods have been used for studying the release and retention of hydrogen in tungsten. The experimental work consists of hydrogen implantations into pure polycrystalline tungsten, the determination of the hydrogen concentrations using ion beam analyses (IBA) and monitoring the out-diffused hydrogen gas with thermodesorption spectrometry (TDS) as the tungsten samples are heated at elevated temperatures. Combining IBA methods with TDS, the retained amount of hydrogen is obtained as well as the temperatures needed for the hydrogen release. With computational methods the hydrogen-defect interactions and implantation-induced irradiation damage can be examined at the atomic level. The method of multiscale modelling combines the results obtained from computational methodologies applicable at different length and time scales. Electron density functional theory calculations were used for determining the energetics of the elementary processes of hydrogen in tungsten, such as diffusivity and trapping to vacancies and surfaces. Results from the energetics of pure tungsten defects were used in the development of an classical bond-order potential for describing the tungsten defects to be used in molecular dynamics simulations. The developed potential was utilized in determination of the defect clustering and annihilation properties. These results were further employed in binary collision and rate theory calculations to determine the evolution of large defect clusters that trap hydrogen in the course of implantation. The computational results for the defect and trapped hydrogen concentrations were successfully compared with the experimental results. With the aforedescribed multiscale analysis the experimental results within this thesis and found in the literature were explained both quantitatively and qualitatively.

Lapset, media ja symbolinen vuorovaikutus : Suomalaisten, englantilaisten ja saksalaisten lasten mediasuhteen tarkastelua

Tämän hetken mediaympäristölle on ominaista intensiivisyys ja jatkuva läsnäolo. Medialla on merkittävä rooli myös pienten lasten jokapäiväisessä elämässä, sillä he aloittavat median säännöllisen seuraamisen keskimäärin kolmen vuoden iässä. Mediasisällöt, mediavälineet ja mediaan liittyvät sosiaaliset suhteet muodostavatkin lapsille mediaympäristön, jossa lapset rakentavat identiteettejään, oppivat sosiaalista kanssakäymistä ja kehittävät näkemyksiään yhteiskunnasta ja kulttuurista. Tutkimuksessa on selvitetty 4-6-vuotiaitten suomalaisten, englantilaisten ja saksalaisten lasten audiovisuaalisen median tulkintaa ja median roolia heidän elämässään. Tutkimuksen tavoitteena on ollut syventää tutkimuksellista tietoa median sosiaalisesta ja kulttuurisesta merkityksestä pienten lasten elämässä ja sitä, miten he tulkitsevat mediasisältöä. Tutkimuksessa lasten mediasuhdetta on tarkasteltu välineellisenä, sosiaalisena, symbolisena ja kulttuurisena tulkintaympäristönä. Edellisten lisäksi tutkimuksessa on arvioitu harvemmin viestinnän tutkimuksessa käytetyn symbolisen interaktionismin teorian tarjoamia mahdollisuuksia lasten mediasuhteen tarkasteluun. Suomessa, Englannissa ja Saksassa kootun kansainvälisen aineiston pohjalta on tarkasteltu myös vertailuryhmien välillä olevia mediaan liittyviä kulttuurisia eroja. Eri vertailumaiden melko samankaltaisesta mediaympäristöstä huolimatta tutkimus antaa viitteitä mediatulkinnoissa olevista kulttuurisista eroista. Media mahdollistaa lapsen erilaistan taitojensa kehittymistä ja voi siten muodostaa heille sosiaalisia, symbolisia ja kulttuurisia resursseja, joilla on merkitystä lapsen kehittymisen kannalta. Lapsen ja median suhde on kaksisuuntainen vuorovaikutussuhde ja mediainformaation tulkinnassa ovat mukana lapsen aiemmat tiedolliset ja sosiaaliset kokemukset. Aktiivisessa mediatulkintasuhteessaan lapsi kehittää sanavarastoaan, havainnointiaan, ajatteluaan ja tunne-elämäänsä. Median käyttö sosiaalisena tapahtumana kehittää osaltaan lapsen sosiaalisia valmiuksia. Siten esimerkiksi perheen median käyttöön liittyvät säännöt ja ohjeet ohjaavat perheen sisäistä toimintaa ja määrittävät lapsen asemaa perheessä. Median sisällöt ja niihin liittyvät erilaiset oheistuotteet toimivat osaltaan lapsen kulttuuristen koodistojen ja luokittelujen muodostajana. Tutkimus osoittaa myös symbolisen interaktionismin teorian tarjoavan varsin poikkitieteellisen tutkimuksellisen viitekehyksen lapsia ja mediaa koskevalle tutkimukselle ja mahdollistaa lasten mediasuhteen tutkimisen ja ymmärtämisen useiden, erilaisten tekijöiden suhteena.

Kaupungin savut ja käryt : Helsingin ilmansuojelu 1945-1982

The smoke and fumes of the city: Air protection in Helsinki from 1945 to 1982 This dissertation examines air pollution and air protection in post-war Helsinki. The period studied ends in 1982 when the Air Protection Act entered into force, thus institutionalising air protection in Finland as a socially governed environmental matter. The dissertation is based on the research traditions of environmental politics and urban environmental history. The development of air protection is approached from the perspectives of politicisation and institutionalisation. The dissertation also investigates how air pollution grew into a social issue and presents various discursive ways of analysing air pollution and protection. The primary research material consists of municipal documents and newspapers, while supplementary material includes journal articles and interviews. The event history of air protection is described through an analysis of the material, including source criticism. The social ways of dealing with air pollution and the emergence of air protection are analysed in the light of case-specific air quality disputes from both factual and discursive perspectives. This approach enables the contextualisation of the development of air protection as part of the local history of post-war Helsinki. The dissertation presents the major sources of air pollution in Helsinki and describes the deterioration of air quality in a society which emphasised the primacy of economic prosperity. The air issue emerged during the 1950s in neighbourhood disputes and was exacerbated into a larger problem in the late 1960s. Concurrent to the formation of the field of environmental protection in Finland, an air protection organisation was established in the 1970s in Helsinki. As a result, air protection became a regular part of municipal government. Air protection in Helsinki developed from small-scale policies focused on individual cases into a large, institutionalised air protection system managed by experts. The dissertation research material gave rise to the following major research themes: the economic dimension of the air issue, the role of science in the formation of the environmental problem, and the establishment of norms for acceptable air quality and reasonable limits to air pollution in the urban environment. The paper also discusses the inequitable distribution of the negative effects of air pollution between the residents of different districts. The dissertation concludes that air protection in Helsinki became a local success story although it was long marred by inefficiency and partial failure.

Trust and Safe Choices: Coping with health-related risks in food consumption in St. Petersburg

This dissertation considers the problem of trust in the context of food consumption. The research perspectives refer to institutional conditions for consumer trust, personal practices of food consumption, and strategies consumers employ for controlling the safety of their food. The main concern of the study is to investigate consumer trust as an adequate response to food risks, i.e. a strategy helping the consumer to make safe choices in an uncertain food situation. "Risky" perspective serves as a frame of reference for understanding and explaining trust relations. The original aim of the study was to reveal the meanings applied to the concepts of trust, safety and risks in the perspective of market choices, the assessments of food risks and the ways of handling them. Supplementary research tasks presumed descriptions of institutional conditions for consumer trust, including descriptions of the food market, and the presentation of food consumption patterns in St. Petersburg. The main empirical material is based on qualitative interviews with consumers and interviews and group discussions with professional experts (market actors, representatives of inspection bodies and consumer organizations). Secondary material is used for describing institutional conditions for consumer trust and the market situation. The results suggest that the idea of consumer trust is associated with the reputation of suppliers, stable quality and taste of their products, and reliable food information. Being a subjectively constructed state connected to the act of acceptance, consumer trust results in positive buying decisions and stable preferences in the food market. The consumers' strategies that aim at safe food choices refer to repetitive interactions with reliable market actors that free them from constant consideration in the marketplace. Trust in food is highly mediated by trust in institutions involved in the food system. The analysis reveals a clear pattern of disbelief in the efficiency of institutional food control. The study analyses this as a reflection of "total distrust" that appears to be a dominant mood in many contexts of modern Russia. However, the interviewees emphasize the state's decisive role in suppressing risks in the food market. Also, the findings are discussed with reference to the consumers' possibilities of personal control over food risks. Three main responses to a risky food situation are identified: the reflexive approach, the traditional approach, and the fatalistic approach.