Investigating physical properties of solid dosage forms during pharmaceutical processing : Process analytical applications of vibrational spectroscopy

In order to improve and continuously develop the quality of pharmaceutical products, the process analytical technology (PAT) framework has been adopted by the US Food and Drug Administration. One of the aims of PAT is to identify critical process parameters and their effect on the quality of the final product. Real time analysis of the process data enables better control of the processes to obtain a high quality product. The main purpose of this work was to monitor crucial pharmaceutical unit operations (from blending to coating) and to examine the effect of processing on solid-state transformations and physical properties. The tools used were near-infrared (NIR) and Raman spectroscopy combined with multivariate data analysis, as well as X-ray powder diffraction (XRPD) and terahertz pulsed imaging (TPI). To detect process-induced transformations in active pharmaceutical ingredients (APIs), samples were taken after blending, granulation, extrusion, spheronisation, and drying. These samples were monitored by XRPD, Raman, and NIR spectroscopy showing hydrate formation in the case of theophylline and nitrofurantoin. For erythromycin dihydrate formation of the isomorphic dehydrate was critical. Thus, the main focus was on the drying process. NIR spectroscopy was applied in-line during a fluid-bed drying process. Multivariate data analysis (principal component analysis) enabled detection of the dehydrate formation at temperatures above 45°C. Furthermore, a small-scale rotating plate device was tested to provide an insight into film coating. The process was monitored using NIR spectroscopy. A calibration model, using partial least squares regression, was set up and applied to data obtained by in-line NIR measurements of a coating drum process. The predicted coating thickness agreed with the measured coating thickness. For investigating the quality of film coatings TPI was used to create a 3-D image of a coated tablet. With this technique it was possible to determine coating layer thickness, distribution, reproducibility, and uniformity. In addition, it was possible to localise defects of either the coating or the tablet. It can be concluded from this work that the applied techniques increased the understanding of physico-chemical properties of drugs and drug products during and after processing. They additionally provided useful information to improve and verify the quality of pharmaceutical dosage forms

La modernización entre cafetales : San José, Costa Rica, 1880-1930

This work examines the urban modernization of San José, Costa Rica, between 1880 and 1930, using a cultural approach to trace the emergence of the bourgeois city in a small Central American capital, within the context of order and progress. As proposed by Henri Lefebvre, Manuel Castells and Edward Soja, space is given its rightful place as protagonist. The city, subject of this study, is explored as a seat of social power and as the embodiment of a cultural transformation that took shape in that space, a transformation spearheaded by the dominant social group, the Liberal elite. An analysis of the product built environment allows us to understand why the city grew in a determined manner: how the urban space became organized and how its infrastructure and services distributed. Although the emphasis is on the Liberal heyday from 1880-1930, this study also examines the history of the city since its origins in the late colonial period through its consolidation as a capital during the independent era, in order to characterize the nineteenth century colonial city that prevailed up to 1890 s. A diverse array of primary sources including official acts, memoirs, newspaper sources, maps and plans, photographs, and travelogues are used to study the initial phase of San Jose s urban growth. The investigation places the first period of modern urban growth at the turn of the nineteenth century within the prevailing ideological and political context of Positivism and Liberalism. The ideas of the city s elite regarding progress were translated into and reflected in the physical transformation of the city and in the social construction of space. Not only the transformations but also the limits and contradictions of the process of urban change are examined. At the same time, the reorganization of the city s physical space and the beginnings of the ensanche are studied. Hygiene as an engine of urban renovation is explored by studying the period s new public infrastructure (including pipelines, sewer systems, and the use of asphalt pavement) as part of the Saneamiento of San José. The modernization of public space is analyzed through a study of the first parks, boulevards and monuments and the emergence of a new urban culture prominently displayed in these green spaces. Parks and boulevards were new public and secular places of power within the modern city, used by the elite to display and educate the urban population into the new civic and secular traditions. The study goes on to explore the idealized image of the modern city through an analysis of European and North American travelogues and photography. The new esthetic of theatrical-spectacular representation of the modern city constructed a visual guide of how to understand and come to know the city. A partial and selective image of generalized urban change presented only the bourgeois facade and excluded everything that challenged the idea of progress. The enduring patterns of spatial and symbolic exclusion built into Costa Rica s capital city at the dawn of the twentieth century shed important light on the long-term political social and cultural processes that have created the troubled urban landscapes of contemporary Latin America.

At the Limits of Presentation : Coming-into-Presence and its Aesthetic Relevance in Jean-Luc Nancy's Philosophy

This study investigates the significance of art in Jean-Luc Nancy s philosophy. I argue that the notion of art contributes to some of Nancy s central ontological ideas. Therefore, I consider art s importance in its own right whether art does have ontological significance, and if so, how one should describe this with respect to the theme of presentation. According to my central argument, with his thinking on art Nancy attempts to give one viewpoint to what is called the metaphysics of presence and to its deconstruction. On which grounds, as I propose, may one say that art is not reducible to philosophy? The thesis is divided into two main parts. The first part, Presentation as a Philosophical Theme, is a historical genesis of the central concepts associated with the birth of presentation in Nancy s philosophy. I examine this from the viewpoint of the differentiation between the ontological notions of presentation and representation by concentrating on the influence of Martin Heidegger and Jacques Derrida, as well as of Hegel and Kant. I give an overview of the way in which being or sense for Nancy is to be described as a coming-into-presence or presentation . Therefore, being takes place in its singular plurality. I argue that Nancy redevelops Heidegger s account of being in two principal ways: first, in rethinking the ontico-ontological difference, and secondly, by striving to radicalize the Heideggerian concept of Mitsein, being-with . I equally wish to show the importance of Derrida s notion of différance and its inherence in Nancy s questioning of being that rests on the unfoundedness of existence. The second part, From Ontology to Art, draws on the importance of art and the aesthetic. If, in Nancy, the question of art touches upon its own limit as the limit of nothingness, how is art able to open its own strangeness and our exposure to this strangeness? My aim is to investigate how Nancy s thinking on art finds its place within the conceptual realm of its inherent difference and interval. My central concern is the thought of originary ungroundedness and the plurality of art and of the arts. As for the question of the difference between art and philosophy, I wish to show that what differentiates art from thought is the fact that art exposes what is obvious but not apparent, if apparent is understood in the sense of givenness. As for art s ability to deconstruct Nancy s ontological notions, I suggest that in question in art is its original heterogeneity and diversity. Art is a matter of differing art occurs singularly, as a local difference. With this in mind, I point out that in reflecting on art in terms of spacing and interval, as a thinker of difference Nancy comes closer to Derrida and his idea of différance than to the structure of Heidegger s ontological difference.

Counter-figures : An Essay on Antimetaphoric Resistance: Paul Celan's Poetry and Poetics at the Limits of Figurality

Titled "An Essay on Antimetaphoric Resistance", the dissertation investigates what is here being called "Counter-figures": a term which has in this context a certain variety of applications. Any other-than-image or other-than-figure, anything that cannot be exhausted by figuration (and that is, more or less, anything at all, except perhaps the reproducible images and figures themselves) can be considered "counter-figurative" with regard to the formation of images and figures, ideas and schemas, "any graven image, or any likeness of any thing". Singularity and radical alterity, as well as temporality and its peculiar mode of uniqueness are key issues here, and an ethical dimension is implied by, or intertwined with, the aesthetic. In terms borrowed from Paul Celan's "Meridian" speech, poetry may "allow the most idiosyncratic quality of the Other, its time, to participate in the dialogue". This connection between singularity, alterity and temporality is one of the reasons why Celan so strongly objects to the application of the traditional concept of metaphor to poetry. As Celan says, "carrying over [übertragen]" by metaphor may imply an unwillingness to "bear with [mittragen]" and to "endure [ertragen]" the poem. The thesis is divided into two main parts. The first consists of five distinct prolegomena which all address the mentioned variety of applications of the term "counter-figures", and especially the rejection or critique of either metaphor (by Aristotle, for instance) or the concept of metaphor (defined by Aristotle, and sometimes deemed "anti-poetic" by both theorists and poets). Even if we restrict ourselves to the traditional rhetorico-poetical terms, we may see how, for instance, metonymy can be a counter-figure for metaphor, allegory for symbol, and irony for any single trope or for any piece of discourse at all. The limits of figurality may indeed be located at these points of intersection between different types of tropes or figures, and even between figures or tropes and the "non-figurative trope" or "pseudo-figure" called catachresis. The second part, following on from the open-ended prolegomena, concentrates on Paul Celan's poetry and poetics. According to Celan, true poetry is "essentially anti-metaphoric". I argue that inasmuch as we are willing to pay attention to the "will" of the poetic images themselves (the tropes and metaphors in a poem) to be "carried ad absurdum", as Celan invites us to do, we may find alternative ways of reading poetry and approaching its "secret of the encounter", precisely when the traditional rhetorical instruments, and especially the notion of metaphor, become inapplicable or suspicious — and even where they still seem to impose themselves.

Social-class inequalities in ill health - the contribution of physical workload

Tutkimuksen aiheita olivat yhteiskuntaluokkien väliset erot sairastavuudessa ja alentuneessa toimintakyvyssä, sekä fyysisen työkuormituksen ja joidenkin muiden työolojen vaikutus sairastavuuteen. Empiirisestä työstä on raportoitu myös neljässä kansainvälisissä tieteellisissä aikakauskirjoissa julkaistussa artikkelissa. Tässä julkaistu yhteenveto sisältää tulosten yhteenvedon lisäksi myös tutkimusta koskevien käsitteellisten ja teoreettisten kysymysten sekä tutkimustradition kriittisen katsauksen. Työn päätavoitteita olivat 1) tutkia fyysisesti kuormittavan työn, ja jossain määrin muiden työolojen osuutta yhteiskuntaluokkien välisiin eroihin sairaudessa ja toimintakyvyn alentuneisuudessa; 2) tutkia työn fyysisen kuormittavuuden, työhön liittyvien vaikutusmahdollisuuksien ja hallinnan (decision latitude), luokka-aseman, iän ja sukupuolen yhteisvaikutuksia heikentyneeseen terveydentilaan; sekä 3) tutkia missä määrin mekaanisten työaltisteiden ja tuki- ja liikuntaelinsairastavuuden välinen yhteys voi selittää yhteiskuntaluokkien välisiä eroja heikentyneessä yleisessä terveydentilassa. Tutkittavat olivat keski-ikäisiä Helsingin kaupungin työntekijöitä. Analyysit perustuivat poikittaisasetelmaan, ja käytetty aineisto oli Helsinki Health Studyn vuosien 2000 ja 2002 välillä kerättyä aineistoa. Analyyseihin käytetyssä aineistossa oli 3740:stä 8002:een tutkittavaa. Tulosten perusteella fyysisillä (sekä fysikaalisilla) työoloilla on merkittävä vaikutus yhteiskuntaluokkien välisiin eroihin yleisessä sairastavuudessa, toimintakyvyn heikentymisessä, tuki- ja liikuntaelinsairastavuudessa sekä itsearvioidussa terveydentilassa. Naisilla lähes puolet heikentyneen toimintakyvyn ja koetun terveydentilan luokkaeroista vaikutti olevan selitettävissä fyysisellä työkuormituksella. Hallintamahdollisuuksien ei havaittu merkittävästi muuttavan fyysisen kuormituksen vaikutusta toimintakykyyn. Fyysisen kuormittavuuden terveysvaikutus voimistui kasvavan iän mukaan enemmän naisilla kuin miehillä. Osa, mutta ei koko fyysisen kuormituksen vaikutus yhteiskuntaluokkien eroihin heikentyneessä terveydessä vaikutti välittyvän tuki- ja liikuntaelinsairastavuuden kautta. Terveys ja sairaus eivät ole yhtenäisiä tiloja, ja siksi monet eri sosiaalisesti ja rakenteellisesti määräytyvät olosuhteet todennäköisesti vaikuttavat yhteiskunnallisten terveyserojen syntymiseen. Fyysis-materiaalisten olojen vaikutusta terveyserojen syntyyn nyky-yhteiskunnassa on mahdollisesti aliarvioitu. Yhteiskuntaluokkien väliset erot fyysis-materiaalisissa olosuhteissa eivät ole kadonneet, ja nämä erot todennäköisesti vaikuttavat terveyserojen syntyyn.

Trends and Explanations for Socioeconomic Differences in Physical Activity

Very limited scientific knowledge exists on the trends and explanations of socioeconomic differences in physical activity among adults. There is a paucity of studies examining whether determinants vary across socioeconomic position and different life stages. This study examines a) how socioeconomic differences in leisure-time and commuting physical activity have changed in Finland from 1978 to 2002 and b) the contribution of childhood socioeconomic position, adolescence sports and exercise, adulthood socioeconomic position, working conditions and other adulthood health behaviours to socioeconomic differences in leisure-time physical activity. This study utilised three population-based datasets collected by the National Institute for Health and Welfare (THL, formerly National Institute for Public Health): the Health Behaviour and Health among the Finnish Adult Population Study from 1978 to 2002 (N=96 105), the National FINRISK Study 2002 and its physical activity sub-study (N= 9 179), and the Health 2000 Study (N=8 028). Survey information was collected by self-administered questionnaires, interviews at home, and measurements made at the study site. The response rates varied from 69 to 89 per cent. Several socioeconomic measures were linked from the national population registers. Based on the results, those with low income were physically inactive during leisure-time and while commuting from 1978 to 2002. Manual worker women, however, were more physically active commuters compared to their counterparts. Parental socioeconomic position contributed directly to adulthood educational differences in leisure-time physical inactivity but also indirectly through adulthood socioeconomic position (occupation, household income) and other unhealthy behaviours (mainly smoking). Among those with low education participation in competitive sports in youth and among those with high education exercise in late adolescence contributed to leisure-time physical activity in adulthood. Long exposure to physically strenuous working conditions in men and current job strain in women contributed to occupational class differences in leisure-time physical activity. Socioeconomic differences in physical activity have remained similar for twenty years in Finland. Educational career seems to have a strong contribution to physical activity. To adopt a lifelong physically active life-style, one should participate in a range of different sports and exercise in adolescence and in youth, have a low exposure to physically and mentally strenuous working conditions in later life and have other healthy behaviours in later life.

Physical activity, fitness, abdominal obesity, and cardiovascular risk factors in Finnish men and women : The National FINRISK 2002 Study

Physical inactivity, low cardiorespiratory fitness, and abdominal obesity are direct and mediating risk factors for cardiovascular disease (CVD). The results of recent studies suggest that individuals with higher levels of physical activity or cardiorespiratory fitness have lower CVD and all-cause mortality than those with lower activity or fitness levels regardless of their level of obesity. The interrelationships of physical activity, fitness, and abdominal obesity with cardiovascular risk factors have not been studied in detail. The aim of this study was to investigate the associations of different types of leisure time physical activity and aerobic fitness with cardiovascular risk factors in a large population of Finnish adults. In addition, a novel aerobic fitness test was implemented and the distribution of aerobic fitness was explored in men and women across age groups. The interrelationships of physical activity, aerobic fitness and abdominal obesity were examined in relation to cardiovascular risk factors. This study was part of the National FINRISK Study 2002, which monitors cardiovascular risk factors in a Finnish adult population. The sample comprised 13 437 men and women aged 25 to 74 years and was drawn from the Population Register as a stratified random sample according to 10-year age groups, gender and area. A separate physical activity study included 9179 subjects, of whom 5 980 participated (65%) in the study. At the study site, weight, height, waist and hip circumferences, and blood pressure were measured, a blood sample was drawn, and an aerobic fitness test was performed. The fitness test estimated maximal oxygen uptake (VO2max) and was based on a non-exercise method by using a heart rate monitor at rest. Waist-to-hip ratio (WHR) was calculated by dividing waist circumference with hip circumference and was used as a measure of abdominal obesity. Participants filled in a questionnaire on health behavior, a history of diseases, and current health status, and a detailed 12-month leisure time physical activity recall. Based on the recall data, relative energy expenditure was calculated using metabolic equivalents, and physical activity was divided into conditioning, non-conditioning, and commuting physical activity. Participants aged 45 to 74 years were later invited to take part in a 2-hour oral glucose tolerance test with fasting insulin and glucose measurements. Based on the oral glucose tolerance test, undiagnosed impaired glucose tolerance and type 2 diabetes were defined. The estimated aerobic fitness was lower among women and decreased with age. A higher estimated aerobic fitness and a lower WHR were independently associated with lower systolic and diastolic blood pressure, lower total cholesterol and triglyceride levels, and with higher high-density lipoprotein (HDL) cholesterol and HDL to total cholesterol ratio. The associations of the estimated aerobic fitness with diastolic blood pressure, triglycerides, and HDL to total cholesterol ratio were stronger in men with a higher WHR. High levels of conditioning and non-conditioning physical activity were associated with lower high-sensitivity C-reactive protein (CRP) levels. High levels of conditioning and overall physical activities were associated with lower insulin and glucose levels. The associations were stronger among women than men. A better self-rated physical fitness was associated with a higher estimated aerobic fitness, lower CRP levels, and lower insulin and glucose levels in men and women. In each WHR third, the risk of impaired glucose tolerance and type 2 diabetes was higher among physically inactive individuals who did not undertake at least 30 minutes of moderate-intensity physical activity on five days per week. These cross-sectional data show that higher levels of estimated aerobic fitness and regular leisure time physical activity are associated with a favorable cardiovascular risk factor profile and that these associations are present at all levels of abdominal obesity. Most of the associations followed a dose-response manner, suggesting that already low levels of physical activity or fitness are beneficial to health and that larger improvements in risk factor levels may be gained from higher activity and fitness levels. The present findings support the recommendation to engage regularly in leisure time physical activity, to pursue a high level of aerobic fitness, and to prevent abdominal obesity.

Physical characterization of plastic surfaces in wearing and cleanability research

Plastic surfaces are a group of materials used for many purposes. The present study was focused on methods for investigation of surface topography, wearing and cleanability of polyvinyl chloride (PVC) model surfaces and industrial plastic surfaces. Contact profilometry, scanning electron microscopy (SEM) and atomic force microscopy (AFM) are powerful methods for studying the topography of plastic surfaces. Although they have their own limitations, they are together an effective tool providing useful information on surface topography, especially when studying laboratory-made PVC model surfaces with known chemical compositions and structures. All examined laboratory-made PVC plastic surfaces examined in this work could be considered as smooth according to both AFM and profilometer measurements because height differences are in the nanoscale on every surface. Industrial plastic surfaces are a complex group of materials because of their chemical and topographical heterogeneity, but they are nevertheless important reference materials when developing cleaning and wearing methods. According to the results of this study the Soiling and Wearing Drum and the Frick-Taber methods are very useful when simulating three-body wearing of plastic surfaces. Both the investigated wearing methods can be used to compare the wearing of different plastic materials using appropriate evaluation methods of wearing and industrial use. In this study, physical methods were developed and adapted from other fields of material research to cleanability studies. The thesis focuses on the methodology for investigating the cleanability of plastic surfaces under realistic conditions, where surface topography and the effect of wear cleanability were among the major topics. A colorimetric method proved to be suitable for examining the cleanability of the industrial plastic surfaces. The results were utilized to evaluate the relationship between cleanability and the surface properties of plastic surfaces. The devices and methods used in the work can be utilized both in material research and product development.

Tracking and identifying wastewater toxicants and assessing their biodegradation products

Screening of wastewater effluents from municipal and industrial wastewater treatment plants with biotests showed that the treated wastewater effluents possess only minor acute toxic properties towards whole organisms (e.g. bacteria, algae, daphnia), if any. In vitro tests (sub-mitochondrial membranes and fish hepatocytes) were generally more susceptible to the effluents. Most of the effluents indicated the presence of hormonally active compounds, as the production of vitellogenin, an egg yolk precursor protein, was induced in fish hepatocytes exposed to wastewater. In addition, indications of slight genotoxic potential was found in one effluent concentrate with a recombinant bacteria test. Reverse electron transport (RET) of mitochondrial membranes was used as a model test to conduct effluent assessment followed by toxicant characterisations and identifications. Using a modified U.S. EPA Toxicity Identification Evaluation Phase I scheme and additional case-specific methods, the main compound in a pulp and paper mill effluent causing RET inhibition was characterised to be an organic, relatively hydrophilic high molecular weight (HMW) compound. The toxicant could be verified as HMW lignin by structural analyses using nuclear magnetic resonance. In the confirmation step commercial and in-house extracted lignin products were used. The possible toxicity related structures were characterised by statistical analysis of the chemical breakdown structures of laboratory-scale pulping and bleaching effluents and the toxicities of these effluents. Finally, the biological degradation of the identified toxicant and other wastewater constituents was evaluated using bioassays in combination with chemical analyses. Biological methods have not been used routinely in establishing effluent discharge limits in Finland. However, the biological effects observed in this study could not have been predicted using only routine physical and chemical effluent monitoring parameters. Therefore chemical parameters cannot be considered to be sufficient in controlling effluent discharges especially in case of unknown, possibly bioaccumulative, compounds that may be present in small concentrations and may cause chronic effects.

Quality of ALICE SSD modules revealed by electrical tests

ALICE (A Large Ion Collider Experiment) is an experiment at CERN (European Organization for Nuclear Research), where a heavy-ion detector is dedicated to exploit the unique physics potential of nucleus-nucleus interactions at LHC (Large Hadron Collider) energies. In a part of that project, 716 so-called type V4 modules were assembles in Detector Laboratory of Helsinki Institute of Physics during the years 2004 - 2006. Altogether over a million detector strips has made this project the most massive particle detector project in the science history of Finland. One ALICE SSD module consists of a double-sided silicon sensor, two hybrids containing 12 HAL25 front end readout chips and some passive components, such has resistors and capacitors. The components are connected together by TAB (Tape Automated Bonding) microcables. The components of the modules were tested in every assembly phase with comparable electrical tests to ensure the reliable functioning of the detectors and to plot the possible problems. The components were accepted or rejected by the limits confirmed by ALICE collaboration. This study is concentrating on the test results of framed chips, hybrids and modules. The total yield of the framed chips is 90.8%, hybrids 96.1% and modules 86.2%. The individual test results have been investigated in the light of the known error sources that appeared during the project. After solving the problems appearing during the learning-curve of the project, the material problems, such as defected chip cables and sensors, seemed to induce the most of the assembly rejections. The problems were typically seen in tests as too many individual channel failures. Instead, the bonding failures rarely caused the rejections of any component. One sensor type among three different sensor manufacturers has proven to have lower quality than the others. The sensors of this manufacturer are very noisy and their depletion voltage are usually outside of the specification given to the manufacturers. Reaching 95% assembling yield during the module production demonstrates that the assembly process has been highly successful.

Properties of Ammonium Nitrate based fertilisers

The text is divided into three parts; Properties, Application and Safety of Ammonium Nitrate (AN) based fertilisers. In Properties, the structures and phase transitions of ammonium and potassium nitrate are reviewed. The consequences of phase transitions affect the proper use of fertilisers. Therefore the products must be stabilised against the volume changes and consequent loss of bulk density and hardness, formation of dust and finally caking of fertilisers. The effect of different stabilisers is discussed. Magnesium nitrate, ammonium sulphate and potassium nitrate are presented as a good compromise. In the Application part, the solid solutions in the systems (K+,NH4+)NO3- and (NH4+,K+)(Cl-,NO3-) are presented based on studies made with DSC and XRD. As there are clear limits for solute content in the solvent lattice, a number of disproportionation transitions exist in these process phases, e.g., N3 (solid solution isomorphous to NH4NO3-III) disproportionates to phases K3 (solid solution isomorphous to KNO3-III) and K2 (solid solution isomorphous to KNO3-II). In the crystallisation experiments, the formation of K3 depends upon temperature and the ratio K/(K+NH4). The formation of phases K3, N3, and K2 was modelled as a function of temperature and the mole ratios. In introducing chlorides, two distinct maxima for K3 were found. Confirmed with commercial potash samples, the variables affecting the reaction of potassium chloride with AN are the particle size, time, temperature, moisture content and amount of organic coating. The phase diagrams obtained by crystallisation studies were compared with a number of commercial fertilisers and, with regard to phase composition, the temperature and moisture content are critical when the formation and stability of solid solutions are considered. The temperature where the AN-based fertiliser is solidified affects the amount of compounds crystallised at that point. In addition, the temperature where the final moisture is evaporated affects the amount and type of solid solution formed at this temperature. The amount of remaining moisture affects the stability of the K3 phase. The K3 phase is dissolved by the moisture and recrystallised into the quantities of K3, which is stable at the temperature where the sample is kept. The remaining moisture should not be free; it should be bound as water in the final product. The temperatures during storage also affect the quantity of K3 phase. As presented in the figures, K3 phase is not stable at temperatu¬res below 30 °C. If the temperature is about 40 °C, the K3 phase can be formed due to the remaining moisture. In the Safety part, self-sustaining decomposition (SSD), oxidising and energetic properties of fertilisers are discussed. Based on the consequence analysis of SSD, early detection of decomposition in warehouses and proper temperature control in the manufacturing process is important. SSD and oxidising properties were found in compositions where K3 exists. It is assumed that potassium nitrate forms a solid matrix in which AN can decompose. The oxidising properties can be affected by the form of the product. Granular products are inherently less oxidising. Finally energetic properties are reviewed. The composition of the fertiliser has an importance based on theoretical calculations supported by experimental studies. Materials such as carbonates and sulphates act as diluents. An excess of ammonium ions acts as a fuel although this is debatable. Based on the experimental work, the physical properties have a major importance over the composition. A high bulk density is of key importance for detonation resistance.

On Random Planar Curves and Their Scaling Limits

Planar curves arise naturally as interfaces between two regions of the plane. An important part of statistical physics is the study of lattice models. This thesis is about the interfaces of 2D lattice models. The scaling limit is an infinite system limit which is taken by letting the lattice mesh decrease to zero. At criticality, the scaling limit of an interface is one of the SLE curves (Schramm-Loewner evolution), introduced by Oded Schramm. This family of random curves is parametrized by a real variable, which determines the universality class of the model. The first and the second paper of this thesis study properties of SLEs. They contain two different methods to study the whole SLE curve, which is, in fact, the most interesting object from the statistical physics point of view. These methods are applied to study two symmetries of SLE: reversibility and duality. The first paper uses an algebraic method and a representation of the Virasoro algebra to find common martingales to different processes, and that way, to confirm the symmetries for polynomial expected values of natural SLE data. In the second paper, a recursion is obtained for the same kind of expected values. The recursion is based on stationarity of the law of the whole SLE curve under a SLE induced flow. The third paper deals with one of the most central questions of the field and provides a framework of estimates for describing 2D scaling limits by SLE curves. In particular, it is shown that a weak estimate on the probability of an annulus crossing implies that a random curve arising from a statistical physics model will have scaling limits and those will be well-described by Loewner evolutions with random driving forces.

Analyzing changes in macro-level drivers of country-specific emissions : The role of consumption, technology and trade

Industrial ecology is an important field of sustainability science. It can be applied to study environmental problems in a policy relevant manner. Industrial ecology uses ecosystem analogy; it aims at closing the loop of materials and substances and at the same time reducing resource consumption and environmental emissions. Emissions from human activities are related to human interference in material cycles. Carbon (C), nitrogen (N) and phosphorus (P) are essential elements for all living organisms, but in excess have negative environmental impacts, such as climate change (CO2, CH4 N2O), acidification (NOx) and eutrophication (N, P). Several indirect macro-level drivers affect emissions change. Population and affluence (GDP/capita) often act as upward drivers for emissions. Technology, as emissions per service used, and consumption, as economic intensity of use, may act as drivers resulting in a reduction in emissions. In addition, the development of country-specific emissions is affected by international trade. The aim of this study was to analyse changes in emissions as affected by macro-level drivers in different European case studies. ImPACT decomposition analysis (IPAT identity) was applied as a method in papers I III. The macro-level perspective was applied to evaluate CO2 emission reduction targets (paper II) and the sharing of greenhouse gas emission reduction targets (paper IV) in the European Union (EU27) up to the year 2020. Data for the study were mainly gathered from official statistics. In all cases, the results were discussed from an environmental policy perspective. The development of nitrogen oxide (NOx) emissions was analysed in the Finnish energy sector during a long time period, 1950 2003 (paper I). Finnish emissions of NOx began to decrease in the 1980s as the progress in technology in terms of NOx/energy curbed the impact of the growth in affluence and population. Carbon dioxide (CO2) emissions related to energy use during 1993 2004 (paper II) were analysed by country and region within the European Union. Considering energy-based CO2 emissions in the European Union, dematerialization and decarbonisation did occur, but not sufficiently to offset population growth and the rapidly increasing affluence during 1993 2004. The development of nitrogen and phosphorus load from aquaculture in relation to salmonid consumption in Finland during 1980 2007 was examined, including international trade in the analysis (paper III). A regional environmental issue, eutrophication of the Baltic Sea, and a marginal, yet locally important source of nutrients was used as a case. Nutrient emissions from Finnish aquaculture decreased from the 1990s onwards: although population, affluence and salmonid consumption steadily increased, aquaculture technology improved and the relative share of imported salmonids increased. According to the sustainability challenge in industrial ecology, the environmental impact of the growing population size and affluence should be compensated by improvements in technology (emissions/service used) and with dematerialisation. In the studied cases, the emission intensity of energy production could be lowered for NOx by cleaning the exhaust gases. Reorganization of the structure of energy production as well as technological innovations will be essential in lowering the emissions of both CO2 and NOx. Regarding the intensity of energy use, making the combustion of fuels more efficient and reducing energy use are essential. In reducing nutrient emissions from Finnish aquaculture to the Baltic Sea (paper III) through technology, limits of biological and physical properties of cultured fish, among others, will eventually be faced. Regarding consumption, salmonids are preferred to many other protein sources. Regarding trade, increasing the proportion of imports will outsource the impacts. Besides improving technology and dematerialization, other viewpoints may also be needed. Reducing the total amount of nutrients cycling in energy systems and eventually contributing to NOx emissions needs to be emphasized. Considering aquaculture emissions, nutrient cycles can be partly closed through using local fish as feed replacing imported feed. In particular, the reduction of CO2 emissions in the future is a very challenging task when considering the necessary rates of dematerialisation and decarbonisation (paper II). Climate change mitigation may have to focus on other greenhouse gases than CO2 and on the potential role of biomass as a carbon sink, among others. The global population is growing and scaling up the environmental impact. Population issues and growing affluence must be considered when discussing emission reductions. Climate policy has only very recently had an influence on emissions, and strong actions are now called for climate change mitigation. Environmental policies in general must cover all the regions related to production and impacts in order to avoid outsourcing of emissions and leakage effects. The macro-level drivers affecting changes in emissions can be identified with the ImPACT framework. Statistics for generally known macro-indicators are currently relatively well available for different countries, and the method is transparent. In the papers included in this study, a similar method was successfully applied in different types of case studies. Using transparent macro-level figures and a simple top-down approach are also appropriate in evaluating and setting international emission reduction targets, as demonstrated in papers II and IV. The projected rates of population and affluence growth are especially worth consideration in setting targets. However, sensitivities in calculations must be carefully acknowledged. In the basic form of the ImPACT model, the economic intensity of consumption and emission intensity of use are included. In seeking to examine consumption but also international trade in more detail, imports were included in paper III. This example demonstrates well how outsourcing of production influences domestic emissions. Country-specific production-based emissions have often been used in similar decomposition analyses. Nevertheless, trade-related issues must not be ignored.