Towards real-time understanding of processes in pharmaceutical powder technology

There is a need for better understanding of the processes and new ideas to develop traditional pharmaceutical powder manufacturing procedures. Process analytical technology (PAT) has been developed to improve understanding of the processes and establish methods to monitor and control processes. The interest is in maintaining and even improving the whole manufacturing process and the final products at real-time. Process understanding can be a foundation for innovation and continuous improvement in pharmaceutical development and manufacturing. New methods are craved for to increase the quality and safety of the final products faster and more efficiently than ever before. The real-time process monitoring demands tools, which enable fast and noninvasive measurements with sufficient accuracy. Traditional quality control methods have been laborious and time consuming and they are performed off line i.e. the analysis has been removed from process area. Vibrational spectroscopic methods are responding this challenge and their utilisation have increased a lot during the past few years. In addition, other methods such as colour analysis can be utilised in noninvasive real-time process monitoring. In this study three pharmaceutical processes were investigated: drying, mixing and tabletting. In addition tablet properties were evaluated. Real-time monitoring was performed with NIR and Raman spectroscopies, colour analysis, particle size analysis and compression data during tabletting was evaluated using mathematical modelling. These methods were suitable for real-time monitoring of pharmaceutical unit operations and increase the knowledge of the critical parameters in the processes and the phenomena occurring during operations. They can improve our process understanding and therefore, finally, enhance the quality of final products.

Death in the Bolivian High Plateau : Burials and Tiwanaku Society

My Ph.D. dissertation presents a multi-disciplinary analysis of the mortuary practices of the Tiwanaku culture of the Bolivian high plateau, situated at an altitude of c. 3800 m above sea level. The Tiwanaku State (c. AD 500-1150) was one of the most important pre-Inca civilisations of the South Central Andes. The book begins with a brief introductory chapter. In chapter 2 I discuss methodological and theoretical developments in archaeological mortuary studies from the late 1960s until the turn of the millennium. I am especially interested in the issue how archaeological burial data can be used to draw inferences on the social structure of prehistoric societies. Chapter 3 deals with the early historic sources written in the 16th and 17th centuries, following the Spanish Conquest of the Incas. In particular, I review information on how the Incas manifested status differences between and within social classes and what kinds of burial treatments they applied. In chapter 4 I compare the Inca case with 20th century ethnographic data on the Aymara Indians of the Bolivian high plateau. Even if Christianity has affected virtually every level of Aymara religion, surprisingly many traditional features can still be observed in present day Aymara mortuary ceremonies. The archaeological part of my book begins with chapter 5, which is an introduction into Tiwanaku archaeology. In the next chapter, I present an overview of previously reported Tiwanaku cemeteries and burials. Chapter 7 deals with my own excavations at the Late Tiwanaku/early post-Tiwanaku cemetery site of Tiraska, located on the south-eastern shore of Lake Titicaca. During the 1998, 2002, and 2003 field seasons, a total of 32 burials were investigated at Tiraska. The great majority of these were subterranean stone-lined tombs, each containing the skeletal remains of 1 individual and 1-2 ceramic vessels. Nine burials have been radiocarbon dated, the dates in question indicating that the cemetery was in use from the 10th until the 13th century AD. In chapter 8 I point out that considerable regional and/or ethnic differences can be noted between studied Tiwanaku cemetery sites. Because of the mentioned differences, and a general lack of securely dated burial contexts, I feel that at present we can do no better than to classify most studied Tiwanaku burials into three broad categories: (1) elite and/or priests, (2) "commoners", and (3) sacrificial victims and/or slaves and/or prisoners of war. On the basis of such indicators as monumental architecture and occupational specialisation we would expect to find considerable status-related differences in tomb size, grave goods, etc. among the Tiwanaku. Interestingly, however, such variation is rather modest, and the Tiwanaku seem to have been a lot less interested in expending considerable labour and resources in burial facilities than their pre-Columbian contemporaries of many parts of the Central Andes.

Principy sintaksicheskoj idiomatizacii

The book consists of an Introduction and four articles published both in Finland and abroad, written in English or Russian. They present the studies of eight Finnish and Russian idiomatic constructions that appear in the following examples: Ikkuna rikki — Окно сломано, lit.: ‘the window broken’, Äiti täällä — Мама здесь, lit.: ‘mother here’, Kaikki myymälöihin! — Все в магазин, lit.: ‘all to the shops’, Пить так пить! ≈ ‘When I drink, I drink (a lot)!’, etc. The aim of the studies is to reconstruct the origins and to trace the development of the above-mentioned constructions up to their modern usages. To this end, the constructions are investigated both from historical and from comparative perspectives. Finally, the case studies provide a possibility to develop more general bases of development of these 'ungrammatical' items. By attempting to answer the question why such constructions develop even though they destroy the harmonious structure of а language, some principles of idiomatization are postulated in the Conclusion.

Other Side of This Life : Death, Value, and Social Being in Thomas Pynchon's Fiction

This dissertation analyzes the interrelationship between death, the conditions of (wo)man s social being, and the notion of value as it emerges in the fiction of the American novelist Thomas Pynchon (1937 ). Pynchon s present work includes six novels V. (1963), The Crying of Lot 49 (1966), Gravity s Rainbow (1973), Vineland (1990), Mason & Dixon (1997), Against the Day (2006) and several short stories. Death constitues a central thematic in Pynchon s work, and it emerges through recurrent questions of mortality, suicide, mass destruction, sacrifice, afterlife, entropy, the relationship between the animate and the inanimate, and the limits of representation. In Pynchon, death is never a mere biological given (or event); it is always determined within a certain historical, cultural, and ideological context. Throughout his work, Pynchon questions the strict ontological separation of life and death by showing the relationship between this separation and social power. Conceptual divisions also reflect the relationship between society and its others, and death becomes that through which lines of social demarcation are articulated. Determined as a conceptual and social "other side", death in Pynchon forms a challenge to modern culture, and makes an unexpected return: the dead return to haunt the living, the inanimate and the animate fuse, and technoscientific attempts at overcoming and controlling death result in its re-emergence in mass destruction and ecological damage. The questioning of the ontological line also affects the structuration of Pynchon's prose, where the recurrent narrated and narrative desire to reach the limits of representation is openly associated with death. Textualized, death appears in Pynchon's writing as a sudden rupture within the textual functioning, when the "other side", that is, the bare materiality of the signifier is foregrounded. In this study, Pynchon s cultural criticism and his poetics come together, and I analyze the subversive role of death in his fiction through Jean Baudrillard s genealogy of the modern notion of death from L échange symbolique et la mort (1976). Baudrillard sees an intrinsic bond between the social repression of death in modernity and the emergence of modern political economy, and in his analysis economy and language appear as parallel systems for generating value (exchange value/ sign-value). For Baudrillard, the modern notion of death as negativity in relation to the positivity of life, and the fact that death cannot be given a proper meaning, betray an antagonistic relation between death and the notion of value. As a mode of negativity (that is, non-value), death becomes a moment of rupture in relation to value-based thinking in short, rationalism. Through this rupture emerges a form of thinking Baudrillard labels the symbolic, characterized by ambivalence and the subversion of conceptual opposites.

Learning from Venice : What a unique city can teach about the aesthetic

Learning from Venice is a philosophical learning diary on what a highly original city can teach urban aesthetics. Throughout history, classical cities have been interpreted and experienced in various ways. But aesthetics has never been accentuated as much as today. Venice has been an important center of commerce, a naval power, and it has had a lot of influence in arts and culture. But in our days it is a tourist trap and a cluster of so called world heritage. The development of tourism is the main reason for the fact that many old cities have become venues for leisure and entertainment, sometimes so that everyday life itself has been pushed to the margins. There is a lot one can learn by studying the history of the aesthetic appreciation of a city. Sometimes the way a city has been enjoyed has changed following the development of traffic. In Venice water buses have replaced the slow and silent gondolas, and since the building of the railway tourists have been approaching the city from a new direction, so that her façade which was built for seafarers has almost become forgotten. There are also themes of change and mobility which are peculiarly Venetian. What is the nature of a city where there are more tourists than inhabitants? And how does one experience a city where water dominates? These questions, and many more, are discussed in Learning from Venice, and side by side with applied aesthetics, the work of philosophers like Walter Benjamin, Gianni Vattimo, and John Dewey, among many others, enter a dialogue with this extraordinary city. Themes discussed include also e.g. walking, surface and depth, Venice as kitsch, and Venice as a museum.

"Ei vittu, mennään röökille" : tutkimus sitaattien tehtävistä ja tekemisestä kaunokirjallis-journalistisissa lehtijutuissa

This research deals with direct speech quotations in magazine articles through two questions: As my major research question, I study the functions of speech quotations based on a data consisting of six literary-journalistic magazine articles. My minor research question builds on the fact that there is no absolute relation between the sound waves of the spoken language and the graphemes of the written one. Hence, I study the general thoughts on how utterances should be arranged in the written form based on a large review of literature and textbooks on journalistic writing as well as interviews I have made with magazine writers and editors, and the Council of Mass Media in Finland. To support my main research questions, I also examine the reference system of the Finnish language, define the aspects of the literary-journalistic article and study vernacular cues in written speech quotations. FUNCTIONS OF QUOTATIONS. I demonstrate the results of my analysis with a six-pointed apparatus. It is a continuum which extends from the structural level of text, all the way through the explicit functions, to the implicit functions of the quotation. The explicit functions deal with the question of what is the content, whereas the implicit ones base mainly on the question how the content is presented. 1. The speech quotation is an distinctive element in the structure of the magazine article. Thereby it creates a rhythm for the text, such as episodes, paragraphs and clauses. 2. All stories are told through a plot, and in magazine articles, the speech quotations are one of the narrative elements that propel the plot forward. 3. The speech quotations create and intensify the location written in the story. This location can be a physical one but also a social one, in which case it describes the atmosphere and mood in the physical environment and of the story characters. 4. The quotations enhance the plausibility of the facts and assumptions presented in the article, and moreover, when a text is placed between quotation marks, the reader can be assured that the text has been reproduced in the authentic verbatim way. 5. Speech quotations tell about the speaker's unique way of using language and the first-hand experiences of the person quoted. 6. The sixth function of speech quotations is probably the most essential one: the quotations characterize the quoted speaker. In other words, in addition to the propositional content of the utterance, the way in which it has been said transmits a lot of the speaker's character (e.g. nature, generation, behaviour, education, attitudes etc.). It is important to notice, that these six functions of my speech quotation apparatus do not exlude one another. It means that every speech quotation basically includes all of the functions discussed above. However, in practice one or more of them have a principal role, while the others play a subsidiary role. HOW TO MAKE QUOTATIONS? It is not suprising that the field of journalism (textbooks, literature and interviews) holds heterogeneous and unestablished thoughts on how the spoken language should be arranged in written quotations, which is my minor research question. However, the most frequent and distinctive aspects can be depicted in a couple of words: serve the reader and respect the target person. Very common advice on how to arrange the quotations is − firstly, to delete such vernacular cues (e.g. repetitions and ”expletives”) that are common in spoken communication, but purposeless in the written language. − secondly, to complete the phonetic word forms of the spoken language into a more reader-friendly form (esim. punanen → punainen, 'red'), and − thirdly, to enhance the independence of clauses from the (authentic) context and to toughen reciprocal links between them. According to the knowledge of the journalistic field, utterances recorded in different points in time of an interview or a data-collecting session can be transferred as consecutive quotations or even merged together. However, if there is any temporal-spatial location written in the story, the dialogue of the story characters should also be situated in an authentic context – chronologically in the right place in the continuum of the events. To summarize, the way in which the utterances should be arranged into written speech quotations is always situationally-specific − and it is strongly based on the author's discretion.

Rakkaat vanhemmat? : Perheen merkityksestä erityisluokan oppilaalle

The aim of this study was to find out the meaning family has for a pupil who studies in a special class, or how important family is for the pupil s emotional life, the development of his self-confidence, freetime activities, attitudes on school, plans for further studies and his general social development. The theoretical base of this study was formed by social scientists' theories on postmodern family, which is due to urbanization and urban life style, and theories on family pluralism, the powerful effects that changes in family life have on pupils in special education, the weak self-confidence and low sosioeconomic background among those pupils and the effects of family's sosioeconomic status on pupil's willingness to get education or the theory on the accumulation of education. Study problems were set in the direction determined by these theories and in order to study the accurateness of the theories. The method used in the study was theme interview, which is sometimes also called half-structured interview. The material for the study was collected in October 1998 in a special school in Helsinki. The material contains answers given by pupils in theme interviews and background information about pupils' families, which where collected from the pupils' parents by mail. Content analysis was used to analyze the material. The study showed that it is very important to pupils' attitudes on school and their self-confidence that their families are entire and that the families give them support. The children, whose parents are interested in school education and discuss a lot about things, seem to have positive attitudes on school and good self-confidence, too. The parental support also has an effect on how the pupils spend their free time and on their hobbies, too. Obviously the families have quite an important meaning for pupils in special class, but if the families don t support them, the consequence is problems particularly for the development of self-confidence. The theory on the low sosioeconomic background among students in special education gets support from this study, but nothing can be said about it's effect on further studies. On account of the results it can be suggested that special schools must arrange occasions where the pupils' parents are clearly informed about the important meaning of their support for the pupils studies and the development of the pupils' self-confidence. The most important sources for the theoretical background were the books written by Jallinoja, Kivinenand Rinne, Moberg, Scanzoni and P. Takala. The most important sources for the method were the books written by Hirsjärvi and Hurme and Pietilä. Keywords: family, special class, pupil in special education, support, self-confidence, postmodern family

Yhteinen käsityö peruskoulun 7. luokalla : Opettajien kokemuksia yhteisen käsityön opetuksesta ja organisoinnista

Finnish education politics presume that basic education should be equal to all students. While organising craft education equality can be understood as similarity or as possibility to choose. The possibility to be able to choose whether textile or technical craft despite of one´s gender has been the aim of laws and curriculums already over 30 years. In practice it´s almost impossible to students to ignore feminine and masculine roles that go deep into our culture. Choosing craft has been divided by gender, which is the reason why possibility to choose has not been good enough to educationalists of equality. The latest guidelines for the National core curriculum for bacis education were issued in 2004. According to curriculum craft education consists parts of both technical and textile craft. All students should take part in both sectors of crafts. Furthermore, one can be given a possibility to consentrate his studies in whether textile or technical craft. The curriculum does not set the rules how the education should be organised, which means that it can be organised in many ways depending on city, school or teacher. Teachers and other specialists have contradictory feelings towards shared craft education, because traditional way to see craft in Finland is to separate textile craft from technical craft. Both crafts have some common features that are introduced in curriculum. Besides there is many equal things in craft theories that bind textile and technical craft to each other. The main purpose of this research was to find out, how shared craft education has been organised at the 7.th grade in Finnish comprehensive school, and which things affect in the settlements. Second goal was to describe and compare teachers´ experiences in teaching shared craft education. Third aim of this study was how shared craft has changed craft education. I collected the research material in May 2006 by interviewing both textile and technical craft teachers who teach shared craft. The material consists of fourteen theme interviews. In the analysis of the material I used theoretic bounded document analysis. According to the research there are three different ways to organise shared craft education: 50 50-arrangement, exchanging period and project week. In the schools that carried out 50 50-arrangement teaching was realised mainly in heterogenous groups. Principals had usual a lot of authorization on how to arrange craft education, which means that their views on equality, laws and curriculum affected in the settlemets more than teachers´ opinions. Teachers´ attitudes to shared craft were mainly positive. The changing of craft education can be divided in two parts: the aims and the containings of the curriculum have changed, as well as the meaning of the craft as core subject. Teachers have been forced to decrease the containings of both textile and technical crafts. Despite of eliminations both crafts still have comprehensive containings. Teachers decided what to teach by these argumets: Students should learn some basic things or produce a certain product. Usually teachers had also a lot of experience and special intrests in crafts. According to this research there is four significant meanings for shared craft education: 1) developing readiness for doing things, 2) developing skills of thinking, 3) delight of doing things and 4) teaching attitude.

Modern techniques in detection, identification and quantification of bacteria and peptides from foods

Standards have been placed to regulate the microbial and preservative contents to assure that foods are safe to the consumer. In a case of a food-related disease outbreak, it is crucial to be able to detect and identify quickly and accurately the cause of the disease. In addition, for every day control of food microbial and preservative contents, the detection methods must be easily performed for numerous food samples. In this present study, quicker alternative methods were studied for identification of bacteria by DNA fingerprinting. A flow cytometry method was developed as an alternative to pulsed-field gel electrophoresis, the golden method . DNA fragment sizing by an ultrasensitive flow cytometer was able to discriminate species and strains in a reproducible and comparable manner to pulsed-field gel electrophoresis. This new method was hundreds times faster and 200,000 times more sensitive. Additionally, another DNA fingerprinting identification method was developed based on single-enzyme amplified fragment length polymorphism (SE-AFLP). This method allowed the differentiation of genera, species, and strains of pathogenic bacteria of Bacilli, Staphylococci, Yersinia, and Escherichia coli. These fingerprinting patterns obtained by SE-AFLP were simpler and easier to analyze than those by the traditional amplified fragment length polymorphism by double enzyme digestion. Nisin (E234) is added as a preservative to different types of foods, especially dairy products, around the world. Various detection methods exist for nisin, but they lack in sensitivity, speed or specificity. In this present study, a sensitive nisin-induced green fluorescent protein (GFPuv) bioassay was developed using the Lactococcus lactis two-component signal system NisRK and the nisin-inducible nisA promoter. The bioassay was extremely sensitive with detection limit of 10 pg/ml in culture supernatant. In addition, it was compatible for quantification from various food matrices, such as milk, salad dressings, processed cheese, liquid eggs, and canned tomatoes. Wine has good antimicrobial properties due to its alcohol concentration, low pH, and organic content and therefore often assumed to be microbially safe to consume. Another aim of this thesis was to study the microbiota of wines returned by customers complaining of food-poisoning symptoms. By partial 16S rRNA gene sequence analysis, ribotyping, and boar spermatozoa motility assay, it was identified that one of the wines contained a Bacillus simplex BAC91, which produced a heat-stable substance toxic to the mitochondria of sperm cells. The antibacterial activity of wine was tested on the vegetative cells and spores of B. simplex BAC91, B. cereus type strain ATCC 14579 and cereulide-producing B. cereus F4810/72. Although the vegetative cells and spores of B. simplex BAC91 were sensitive to the antimicrobial effects of wine, the spores of B. cereus strains ATCC 14579 and F4810/72 stayed viable for at least 4 months. According to these results, Bacillus spp., more specifically spores, can be a possible risk to the wine consumer.

Debunking Weak Sustainable Consumption : Towards Strong Sustainable Consumption Governance

Achieving sustainable consumption patterns is a crucial step on the way towards sustainability. The scientific knowledge used to decide which priorities to set and how to enforce them has to converge with societal, political, and economic initiatives on various levels: from individual household decision-making to agreements and commitments in global policy processes. The aim of this thesis is to draw a comprehensive and systematic picture of sustainable consumption and to do this it develops the concept of Strong Sustainable Consumption Governance. In this concept, consumption is understood as resource consumption. This includes consumption by industries, public consumption, and household consumption. Next to the availability of resources (including the available sink capacity of the ecosystem) and their use and distribution among the Earth’s population, the thesis also considers their contribution to human well-being. This implies giving specific attention to the levels and patterns of consumption. Methods: The thesis introduces the terminology and various concepts of Sustainable Consumption and of Governance. It briefly elaborates on the methodology of Critical Realism and its potential for analysing Sustainable Consumption. It describes the various methods on which the research is based and sets out the political implications a governance approach towards Strong Sustainable Consumption may have. Two models are developed: one for the assessment of the environmental relevance of consumption activities, another to identify the influences of globalisation on the determinants of consumption opportunities. Results: One of the major challenges for Strong Sustainable Consumption is that it is not in line with the current political mainstream: that is, the belief that economic growth can cure all our problems. So, the proponents have to battle against a strong headwind. Their motivation however is the conviction that there is no alternative. Efforts have to be taken on multiple levels by multiple actors. And all of them are needed as they constitute the individual strings that together make up the rope. However, everyone must ensure that they are pulling in the same direction. It might be useful to apply a carrot and stick strategy to stimulate public debate. The stick in this case is to create a sense of urgency. The carrot would be to articulate better the message to the public that a shrinking of the economy is not as much of a disaster as mainstream economics tends to suggest. In parallel to this it is necessary to demand that governments take responsibility for governance. The dominant strategy is still information provision. But there is ample evidence that hard policies like regulatory instruments and economic instruments are most effective. As for Civil Society Organizations it is recommended that they overcome the habit of promoting Sustainable (in fact green) Consumption by using marketing strategies and instead foster public debate in values and well-being. This includes appreciating the potential of social innovation. A countless number of such initiatives are on the way but their potential is still insufficiently explored. Beyond the question of how to multiply such approaches, it is also necessary to establish political macro structures to foster them.

Late Transition Metal and Aluminum Complexes for the Polymerization of Ethene and Acrylates

Polyethene, polyacrylates and polymethyl acrylates are versatile materials that find wide variety of applications in several areas. Therefore, polymerization of ethene, acrylates and methacrylates has achieved a lot attention during past years. Numbers of metal catalysts have been introduced in order to control the polymerization and to produce tailored polymer structures. Herein an overview on the possible polymerization pathways for ethene, acrylates and methacrylates is presented. In this thesis iron(II) and cobalt(II) complexes bearing tri- and tetradentate nitrogen ligands were synthesized and studied in the polymerization of tertbutyl acrylate (tBA) and methyl methacrylate (MMA). Complexes are activated with methylaluminoxane (MAO) before they form active combinations for polymerization reactions. The effect of reaction conditions, i.e. monomer concentration, reaction time, temperature, MAO to metal ratio, on activity and polymer properties were investigated. The described polymerization system enables mild reaction conditions, the possibility to tailor molar mass of the produced polymers and provides good control over the polymerization. Moreover, the polymerization of MMA in the presence of iron(II) complex with tetradentate nitrogen ligands under conditions of atom transfer radical polymerization (ATRP) was studied. Several manganese(II) complexes were studied in the ethene polymerization with combinatorial methods and new active catalysts were found. These complexes were also studied in acrylate and methacrylate polymerizations after MAO activation and converted into the corresponding alkyl (methyl or benzyl) derivatives. Combinatorial methods were introduced to discover aluminum alkyl complexes for the polymerization of acrylates and methacrylates. Various combinations of aluminum alkyls and ligands, including phosphines, salicylaldimines and nitrogen donor ligands, were prepared in situ and utilized to initiate the polymerization of tBA. Phosphine ligands were found to be the most active and the polymerization MMA was studied with these active combinations. In addition, a plausible polymerization mechanism for MMA based on ESI-MS, 1H and 13C NMR is proposed.

The church must become the people of Soweto : Manas Buthelezi’s existential-Christocentric understanding of the church

The aim of this study has been to discern what Manas Buthelezi (1935-), a black South African Lutheran theologian and later also a bishop, regards as the requirements a church has to fulfill in order to be credible in the apartheid society. Buthelezi’s dissertation and several articles written between the years 1968 and 1993 are the sources of this study. Also the lectures held in Heidelberg in 1972 are referred to. Systematic analysis is the method used. The question of the credibility of the church is studied through three concepts that play an important role in Buthelezi’s ecclesiological thought, namely the wholeness of life, incarnation and liberation. The notion of the wholeness of life stems from the African tradition. Buthelezi takes the concept into the Christian church: the church should realize that God is the Creator of all life and Christ the lord of every aspect of human existence. Life is one entity coram Deo. However, the church is not to become the world; solidarity between the two must remain critical as the church is also called to play a prophetic role in the society. The church is in an open relationship with the world. It has a unique message of forgiveness and reconciliation. Nevertheless, the message is not a possession of the church but it is addressed to the whole world. The meaning of incarnation comes close to that of the wholeness of life. Following the example of Christ’s incarnation, the church must become human in the reality of the people. The church in Soweto is to become the people of Soweto, that is, the church must become as vulnerable as the people are. An incarnate church cannot be immune to the oppression that people experience, because the people are the church. The church is therefore bound to suffer. Buthelezi’s theology of the cross is pragmatic: the suffering of the church aims at the liberation of the oppressed. At times the physical presence of the church by the side of the suffering people is the only way to preach the incarnate gospel. In the South Africa of the late 1960s onwards the liberation of the oppressed black people was high on the agenda of Black Theology. As a leader of the early South African Black Theology, Buthelezi is concerned about the racial injustice in his country. He urges the churches to join the struggle against it as one people of God. The notions of liberation and the wholeness of life emerge in Buthelezi’s holistic understanding of liberation that involves the inner liberation of the black spirit and the liberation of the economic, social and political aspects of life. Interpreting Tillich’s correlation method in the South African situation, and also paralleling other liberation theologians, Buthelezi takes the existential situation of the people as the starting point for liberation. The gospel has to respond to the existential questions of people. The church is called to work for the liberation of society but it must also be liberated itself. Buthelezi initiated the LWF statement on the status confessionis in South Africa (1977). In line with the statement, he calls for church unity on the human level. For the unity to be true, it has to be experienced on the grassroots’ level. All the three concepts covered urge the church to come down from any ivory tower and out of any spiritual haven it might hide in. A lot of the credibility of the church derives from the behavior of the people. Buthelezi’s concentration on how the people who constitute the church should live their faith leaves less attention to how God constitutes the church. I have labeled Buthelezi’s understanding of the church existential-Christocentric due to the emphasis he lays on the need of the church to take the existential situation of the people seriously and on the other hand, on Christ as the exemplar for the church.

Regional Integration and the State : The Changing Nature of Sovereignty in Southern Africa and Europe

The study explores the role of the state in regional integration processes. The question is approached through theoretical discussion and two case-studies - SADC (Southern African Development Community) and the EU. The main research question of the study is, what are the possibilities and problems of the integration process in Southern Africa and how do they differ from the possibilities and problems of the integration process in Europe. The undelrying question of the study is why do states decide to participate in an integration process where they have to limit their sovereignty. Review of the theoretical discussion of the integration studies shows that the integration process is affected by several factors on different levels of the international system. But the state plays a central role in integration processes - integration processes are inititated and carried on by the participatig states. The European integration process shows that the interests of the state can change over time. At the beginning of the integration process, the objective was to strengthen participating states. Later EU member states have decided that it is in their interest to deepen the process even if it has meant limitation of their sovereignty. The determinant factor has been that the member states have considered it to be in their interst to deepen the process. In Southern Africa the integration process is only at the beginning. SADC aims to establish a free trade area by 2008. The biggest challenge is how to implement the integration process so that it benefits all member states in a region that is economically dominated by South Africa. In practice this can be achieved through establishment of corrective mechanisms, which ensure equitable distribution of benefits. This would require deeper integration and South Africa to adapt responsibility towards its regional partners. African integration processes in general have not been as successful as for example the EU. African states have been reluctant to limit their sovereignty in favour of regional organisations.This can be explained by the differences between European and African states. The EU member states have been democracies while African states have been characterised by concentration of power in the executive branch. Furthermore the political systems in Africa have been characterised by vertical clientelist reltionships. As a result it has not been in the interest of the political elite to limit the state sovereignty in favour of regional organisations. In recent years SADC has been relatively succesful in its integration process and reforms, but a lot remains to be done before the implementation of the free trade area can be succesful. The institutional structure and treaties of SADC differ from the structures of the EU. Member states are the main actors of the integration processes. Their differences are reflected in the process and produce different kinds of integration in different parts of the world.

DNA Packaging and Host Cell Lysis: Late Events in Bacteriophage PRD1 Infection

The object of this study is a tailless internal membrane-containing bacteriophage PRD1. It has a dsDNA genome with covalently bound terminal proteins required for replication. The uniqueness of the structure makes this phage a desirable object of research. PRD1 has been studied for some 30 years during which time a lot of information has accumulated on its structure and life-cycle. The two least characterised steps of the PRD1 life-cycle, the genome packaging and virus release are investigated here. PRD1 shares the main principles of virion assembly (DNA packaging in particular) and host cell lysis with other dsDNA bacteriophages. However, this phage has some fascinating individual peculiarities, such as DNA packaging into a membrane vesicle inside the capsid, absence of apparent portal protein, holin inhibitor and procapsid expansion. In the course of this study we have identified the components of the DNA packaging vertex of the capsid, and determined the function of protein P6 in packaging. We managed to purify the procapsids for an in vitro packaging system, optimise the reaction and significantly increase its efficiency. We developed a new method to determine DNA translocation and were able to quantify the efficiency and the rate of packaging. A model for PRD1 DNA packaging was also proposed. Another part of this study covers the lysis of the host cell. As other dsDNA bacteriophages PRD1 has been proposed to utilise a two-component lysis system. The existence of this lysis system in PRD1 has been proven by experiments using recombinant proteins and the multi-step nature of the lysis process has been established.

Characterizing Physical Properties of Wetting Paper by Air Coupled Ultrasound and Light

This thesis reports investigations into the paper wetting process and its effects on the surface roughness and the out-of-plane (ZD) stiffness of machine-made paper. The aim of this work was to test the feasibility of employing air-borne ultrasound methods to determine surface roughness (by reflection) and ZD stiffness (by through transmission) of paper during penetration of distilled water, isopropanol and their mixtures. Air-borne ultrasound provides a non-contacting way to evaluate sample structure and mechanics during the liquid penetration event. Contrary to liquid immersion techniques, an air-borne measurement allows studying partial wetting of paper. In addition, two optical methods were developed to reveal the liquid location in paper during wetting. The laser light through transmission method was developed to monitor the liquid location in partially wetted paper. The white light reflection method was primarily used to monitor the penetration of the liquid front in the thickness direction. In the latter experiment the paper was fully wetted. The main results of the thesis were: 1) Liquid penetration induced surface roughening was quantified by monitoring the ultrasound reflection from the paper surface. 2) Liquid penetration induced stiffness alteration in the ZD of paper could be followed by measuring the change in the ultrasound ZD resonance in paper. 3) Through transmitted light revealed the liquid location in the partially wetted paper. 4) Liquid movement in the ZD of the paper could be observed by light reflection. The results imply that the presented ultrasonic means can without contact measure the alteration of paper roughness and stiffness during liquid transport. These methods can help avoiding over engineering the paper which reduces raw material and energy consumption in paper manufacturing. The presented optical means can estimate paper specific wetting properties, such as liquid penetration speed, transport mechanisms and liquid location within the paper structure. In process monitoring, these methods allow process tuning and manufacturing of paper with engineered liquid transport characteristics. With such knowledge the paper behaviour during printing can be predicted. These findings provide new methods for paper printing, surface sizing, and paper coating research.