Modifications of surface materials and their effects on cleanability as studied by radiochemical methods

Modifications of surface materials and their effects on cleanability have important impacts in many fields of activity. In this study the primary aim was to develop radiochemical methods suitable for evaluating cleanability in material research for different environments. Another aim was to investigate the effects of surface modifications on cleanabilitity and surface properties of plastics, ceramics, concrete materials and also their coatings in conditions simulating their typical environments. Several new 51Cr and 14C labelled soils were developed for testing situations. The new radiochemical methods developed were suitable for examining different surface materials and different soil types, providing quantitative information about the amount of soil on surfaces. They also take into account soil soaked into surfaces. The supporting methods colorimetric determination and ATP bioluminescence provided semi-quantitative results. The results from the radiochemical and supporting methods partly correlated with each other. From a material research point of view numerous new materials were evaluated. These included both laboratory-made model materials and commercial products. Increasing the amount of plasticizer decreased the cleanability of poly(vinyl chloride) (PVC) materials. Microstructured surfaces of plastics improved the cleanability of PVC from particle soils, whereas for oil soil microstructuring reduced the cleanability. In the case of glazed ceramic materials, coatings affected the cleanability. The roughness of surfaces correlated with cleanability from particle soils and the cleanability from oil soil correlated with the contact angles. Organic particle soil was removed more efficiently from TiO2-coated ceramic surfaces after UV-radiation than without UV treatment, whereas no effect was observed on the cleanability of oil soil. Coatings improved the cleanability of concrete flooring materials intended for use in animal houses.

Atomic Layer Deposition for optical applications: metal fluoride thin films and novel devices

Thin films of various metal fluorides are suited for optical coatings from infrared (IR) to ultraviolet (UV) range due to their excellent light transmission. In this work, novel metal fluoride processes have been developed for atomic layer deposition (ALD), which is a gas phase thin film deposition method based on alternate saturative surface reactions. Surface controlled self-limiting film growth results in conformal and uniform films. Other strengths of ALD are precise film thickness control, repeatability and dense and pinhole free films. All these make the ALD technique an ideal choice also for depositing metal fluoride thin films. Metal fluoride ALD processes have been largely missing, which is mostly due to a lack of a good fluorine precursor. In this thesis, TiF4 precursor was used for the first time as the fluorine source in ALD for depositing CaF2, MgF2, LaF3 and YF3 thin films. TaF5 was studied as an alternative novel fluorine precursor only for MgF2 thin films. Metal-thd (thd = 2,2,6,6-tetramethyl-3,5-heptanedionato) compounds were applied as the metal precursors. The films were grown at 175 450 °C and they were characterized by various methods. The metal fluoride films grown at higher temperatures had generally lower impurity contents with higher UV light transmittances, but increased roughness caused more scattering losses. The highest transmittances and low refractive indices below 1.4 (at 580 nm) were obtained with MgF2 samples. MgF2 grown from TaF5 precursor showed even better UV light transmittance than MgF2 grown from TiF4. Thus, TaF5 can be considered as a high quality fluorine precursor for depositing metal fluoride thin films. Finally, MgF2 films were applied in fabrication of high reflecting mirrors together with Ta2O5 films for visible region and with LaF3 films for UV region. Another part of the thesis consists of applying already existing ALD processes for novel optical devices. In addition to the high reflecting mirrors, a thin ALD Al2O3 film on top of a silver coating was proven to protect the silver mirror coating from tarnishing. Iridium grid filter prototype for rejecting IR light and Ir-coated micro channel plates for focusing x-rays were successfully fabricated. Finally, Ir-coated Fresnel zone plates were shown to provide the best spatial resolution up to date in scanning x-ray microscopy.

Anthraquinones from the Fungus Dermocybe sanguinea as Textile Dyes

This study is based on the multidiciplinary approach of using natural colorants as textile dyes. The author was interested in both the historical and traditional aspects of natural dyeing as well as the modern industrial applications of the pure natural compounds. In the study, the anthraquinone compounds were isolated as aglycones from the ectomycorrhizal fungus Dermocybe sanguinea. The endogenous beta-glucosidase of the fungus was used to catalyse the hydrolysis of the O-glycosyl linkage in emodin- and dermocybin-1-beta-D-glucopyranosides. The method, in which 10.45 kg of fresh fungi was starting material, yielded two fractions: 56.0 g of Fraction 1 (94% of the total amount of pigment,) consisting almost exclusively of the main pigments emodin and dermocybin, and 3.3 g of Fraction 2 (6%) consisting mainly of the anthraquinone carboxylic acids. The anthraquinone compounds in Fractions 1 and 2 were separated by one- and two-dimensional thin-layer-chromatography (TLC) using silica plates. 1D TLC showed that neither an acidic nor a basic solvent system alone separated completely all the anthraquinones isolated from D. sanguinea, in spite of the variation of the rations of the solvent components in the systems. Thus, a new 2D TLC technique was developed, applying n-pentanol-pyridine-methanol (6:4:3, v/v/v) and toluene-ethyl acetate-ethanol-formic acid (10:8:1:2, v/v/v/v) as eluents. Fifteen different anthraquinone derivatives were completely separated from one another. Emodin, physcion, endocrocin, dermolutein, dermorubin, 5-chlorodermorubin, emodin-1-beta-D-glucopyranoside, dermocybin-1-beta-D-glucopyranoside and dermocybin, and five new compounds, not earlier identified in D. sanguinea, 7-chloroemodin, 5,7-dichloroemodin, 5,7-dichloroendocrocin, 4-hydroxyaustrocorticone and austrocorticone, were separated and identified on the basis of their Rf-values, UV/Vis spectra and mass spectra. One substance remained unidentified, because of its very low concentration. The anthraquinones in Fractions 1 and 2 were preparatively separeted by liquid-liquid partition, with isopropylmethyl ketone and aqueous phosphate buffer as the solvent system. Advantage was taken of the principle of stepwise pH-gradient elution. The multiple liquid-liquid partition (MLLP) offered an excellent method for the preparative separation of compounds, which contain acidic groups such as the phenolic OH and COOH groups. Due to their strong aggregation properties, these compounds are, without derivatization, very difficult to separate on a preparative scale by chromatographic methods. By the MLLP method remarkable separations were achieved for the components in each mixture. Emodin and dermocybin were both obtained from Fraction 1 in a purity of at least 99%. Pure emodin and dermocybin were applied as mordant dyes to wool and polyamide and as disperse dyes to polyester and polyamide, using the high temperature (HT) technique. A mixture of dermorubin and 5-chlorodermorubin was applied as an acid dye to wool. In these experiments, synthetic dyes were used as references. Experiments were also performed using water extract of the air-dried fungi as dye liquor for wool and silk. The main colouring compounds in the crude water extract were emodin and dermocybin, which indicated that the O-glycosyl linkages in emodin- and dermocybin-1-beta-D-glucopyranosides were broken by the beta-glucosidase enzyme. Apparently, the hydrolysis occurred during the drying of the fungi and during the soaking of the dried fruit bodies overnight when preparing the dyebath. The colour of each dyed material was investigated in terms of the CIELAB L*, a* and b* values, and the colour fastness to light, washing and rubbing was tested according to the ISO standards. In the mordant dyeing experiments, emodin dyed wool and polyamide yellow and red, depending on the pH of the dyebath. Dermocybin gave purple and violet colours. The colour fastness of the mordant-dyed fabrics varied from good to moderate. The fastness properties of the natural anthraquinone carboxylic acids on wool were good, indicating the strength of the ionic bonds between the COO- groups of the dyes and the NH3+ groups of the fibres. In the disperse dyeing experiments, emodin dyed polyester bright yellow and dermocybin bright reddish-orange, and the fabrics showed excellent colour fastness. In contrast, emodin and dermocybin successfully dyed polyamide brownish-orange and wine-red, respectively, but with only moderate fastness. In industrial dyeing processes, natural anthraquinone aglycone mixtures dyed wool and silk well even at low concentrations of mordants, i.e. with 10% of the weight of the fibre (owf) of KAl(SO4)2 and 1 or 0.5% owf of other mordants. This study showed that purified natural anthraquinone compounds can produce bright hues with good colour-fastness properties in different textile materials. Natural anthraquinones have a significant potential for new dyeing techniques and will provide useful alternatives to synthetic dyes.

Topographical, structural and geophysical characterization of fracture zones: implications for groundwater flow and vulnerability

The main objective of this study is to evaluate selected geophysical, structural and topographic methods on regional, local, and tunnel and borehole scales, as indicators of the properties of fracture zones or fractures relevant to groundwater flow. Such information serves, for example, groundwater exploration and prediction of the risk of groundwater inflow in underground construction. This study aims to address how the features detected by these methods link to groundwater flow in qualitative and semi-quantitative terms and how well the methods reveal properties of fracturing affecting groundwater flow in the studied sites. The investigated areas are: (1) the Päijänne Tunnel for water-conveyance whose study serves as a verification of structures identified on regional and local scales; (2) the Oitti fuel spill site, to telescope across scales and compare geometries of structural assessment; and (3) Leppävirta, where fracturing and hydrogeological environment have been studied on the scale of a drilled well. The methods applied in this study include: the interpretation of lineaments from topographic data and their comparison with aeromagnetic data; the analysis of geological structures mapped in the Päijänne Tunnel; borehole video surveying; groundwater inflow measurements; groundwater level observations; and information on the tunnel s deterioration as demonstrated by block falls. The study combined geological and geotechnical information on relevant factors governing groundwater inflow into a tunnel and indicators of fracturing, as well as environmental datasets as overlays for spatial analysis using GIS. Geophysical borehole logging and fluid logging were used in Leppävirta to compare the responses of different methods to fracturing and other geological features on the scale of a drilled well. Results from some of the geophysical measurements of boreholes were affected by the large diameter (gamma radiation) or uneven surface (caliper) of these structures. However, different anomalies indicating more fractured upper part of the bedrock traversed by well HN4 in Leppävirta suggest that several methods can be used for detecting fracturing. Fracture trends appear to align similarly on different scales in the zone of the Päijänne Tunnel. For example, similarities of patterns were found between the regional magnetic trends, correlating with orientations of topographic lineaments interpreted as expressions of fracture zones. The same structural orientations as those of the larger structures on local or regional scales were observed in the tunnel, even though a match could not be made in every case. The size and orientation of the observation space (patch of terrain at the surface, tunnel section, or borehole), the characterization method, with its typical sensitivity, and the characteristics of the location, influence the identification of the fracture pattern. Through due consideration of the influence of the sampling geometry and by utilizing complementary fracture characterization methods in tandem, some of the complexities of the relationship between fracturing and groundwater flow can be addressed. The flow connections demonstrated by the response of the groundwater level in monitoring wells to pressure decrease in the tunnel and the transport of MTBE through fractures in bedrock in Oitti, highlight the importance of protecting the tunnel water from a risk of contamination. In general, the largest values of drawdown occurred in monitoring wells closest to the tunnel and/or close to the topographically interpreted fracture zones. It seems that, to some degree, the rate of inflow shows a positive correlation with the level of reinforcement, as both are connected with the fracturing in the bedrock. The following geological features increased the vulnerability of tunnel sections to pollution, especially when several factors affected the same locations: (1) fractured bedrock, particularly with associated groundwater inflow; (2) thin or permeable overburden above fractured rock; (3) a hydraulically conductive layer underneath the surface soil; and (4) a relatively thin bedrock roof above the tunnel. The observed anisotropy of the geological media should ideally be taken into account in the assessment of vulnerability of tunnel sections and eventually for directing protective measures.

Lipid-Containing Icosahedral dsDNA Bacteriophages: Entry, Exit and Structure

In this thesis three icosahedral lipid-containing double-stranded (ds) deoxyribonucleic acid (DNA) bacteriophages have been studied: PRD1, Bam35 and P23-77. The work focuses on the entry, exit and structure of the viruses. PRD1 is the type member of the Tectiviridae family, infecting a variety of Gram-negative bacteria. The PRD1 receptor binding complex, consisting of the penton protein P31, the spike protein P5 and the receptor binding protein P2 recognizes a specific receptor on the host surface. In this study we found that the transmembrane protein P16 has an important stabilization function as the fourth member of the receptor binding complex and protein P16 may have a role in the formation of a tubular membrane structure, which is needed in the ejection of the genome into the cell. Phage Bam35 (Tectiviridae), which infects Gram-positive hosts, has been earlier found to resemble PRD1 in morphology and genome organization The uncharacterized early and late events in the Bam35 life cycle were studied by electrochemical methods. Physiological changes in the beginning of the infection were found to be similar in both lysogenic and nonlysogenic cell lines, Bam35 inducing a temporal decrease of membrane voltage and K+ efflux. At the end of the infection cycle physiological changes were observed only in the nonlysogenic cell line. The strong K+ efflux 40 min after infection and the induced premature cell lysis propose that Bam35 has a similar holin-endolysin lysis system to that of PRD1. Thermophilic icosahedral dsDNA Thermus phages P23-65H, P23-72 and P23-77 have been proposed to belong to the Tectiviridae family. In this study these phages were compared to each other. Analysis of structural protein patterns and stability revealed these phages to be very similar but not identical. The most stable of the studied viruses, P23-77, was further analyzed in more detail. Cryo-electron microscopy and three-dimensional image reconstruction was used to determine the structure of virus to 14 Å resolution. Results of thin layer chromatography for neutral lipids together with analysis of the three dimensional reconstruction of P23-77 virus particle revealed the presence of an internal lipid membrane. The overall capsid architecture of P23-77 is similar to PRD1 and Bam35, but most closely it resembles the structure of the capsid of archaeal virus SH1. This complicates the classification of dsDNA, internal lipid-containing icosahedral viruses.

From a tree to a stand in Finnish boreal forests: biomass estimation and comparison of methods

There is an increasing need to compare the results obtained with different methods of estimation of tree biomass in order to reduce the uncertainty in the assessment of forest biomass carbon. In this study, tree biomass was investigated in a 30-year-old Scots pine (Pinus sylvestris) (Young-Stand) and a 130-year-old mixed Norway spruce (Picea abies)-Scots pine stand (Mature-Stand) located in southern Finland (61º50' N, 24º22' E). In particular, a comparison of the results of different estimation methods was conducted to assess the reliability and suitability of their applications. For the trees in Mature-Stand, annual stem biomass increment fluctuated following a sigmoid equation, and the fitting curves reached a maximum level (from about 1 kg/yr for understorey spruce to 7 kg/yr for dominant pine) when the trees were 100 years old. Tree biomass was estimated to be about 70 Mg/ha in Young-Stand and about 220 Mg/ha in Mature-Stand. In the region (58.00-62.13 ºN, 14-34 ºE, ≤ 300 m a.s.l.) surrounding the study stands, the tree biomass accumulation in Norway spruce and Scots pine stands followed a sigmoid equation with stand age, with a maximum of 230 Mg/ha at the age of 140 years. In Mature-Stand, lichen biomass on the trees was 1.63 Mg/ha with more than half of the biomass occurring on dead branches, and the standing crop of litter lichen on the ground was about 0.09 Mg/ha. There were substantial differences among the results estimated by different methods in the stands. These results imply that a possible estimation error should be taken into account when calculating tree biomass in a stand with an indirect approach.

Structure and Dynamics of Coil-like Molecules by Residual Dipolar Couplings

Nuclear magnetic resonance (NMR) spectroscopy provides us with many means to study biological macromolecules in solution. Proteins in particular are the most intriguing targets for NMR studies. Protein functions are usually ascribed to specific three-dimensional structures but more recently tails, long loops and non-structural polypeptides have also been shown to be biologically active. Examples include prions, -synuclein, amylin and the NEF HIV-protein. However, conformational preferences in coil-like molecules are difficult to study by traditional methods. Residual dipolar couplings (RDCs) have opened up new opportunities; however their analysis is not trivial. Here we show how to interpret RDCs from these weakly structured molecules. The most notable residual dipolar couplings arise from steric obstruction effects. In dilute liquid crystalline media as well as in anisotropic gels polypeptides encounter nematogens. The shape of a polypeptide conformation limits the encounter with the nematogen. The most elongated conformations may come closest whereas the most compact remain furthest away. As a result there is slightly more room in the solution for the extended than for the compact conformations. This conformation-dependent concentration effect leads to a bias in the measured data. The measured values are not arithmetic averages but essentially weighted averages over conformations. The overall effect can be calculated for random flight chains and simulated for more realistic molecular models. Earlier there was an implicit thought that weakly structured or non-structural molecules would not yield to any observable residual dipolar couplings. However, in the pioneering study by Shortle and Ackerman RDCs were clearly observed. We repeated the study for urea-denatured protein at high temperature and also observed indisputably RDCs. This was very convincing to us but we could not possibly accept the proposed reason for the non-zero RDCs, namely that there would be some residual structure left in the protein that to our understanding was fully denatured. We proceeded to gain understanding via simulations and elementary experiments. In measurements we used simple homopolymers with only two labelled residues and we simulated the data to learn more about the origin of RDCs. We realized that RDCs depend on the position of the residue as well as on the length of the polypeptide. Investigations resulted in a theoretical model for RDCs from coil-like molecules. Later we extended the studies by molecular dynamics. Somewhat surprisingly the effects are small for non-structured molecules whereas the bias may be large for a small compact protein. All in all the work gave clear and unambiguous results on how to interpret RDCs as structural and dynamic parameters of weakly structured proteins.

Water quality estimation by optical remote sensing in boreal lakes

In lake-rich regions, the gathering of information about water quality is challenging because only a small proportion of the lakes can be assessed each year by conventional methods. One of the techniques for improving the spatial and temporal representativeness of lake monitoring is remote sensing from satellites and aircrafts. The experimental material included detailed optical measurements in 11 lakes, air- and spaceborne remote sensing measurements with concurrent field sampling, automatic raft measurements and a national dataset of routine water quality measurements from over 1100 lakes. The analyses of the spatially high-resolution airborne remote sensing data from eutrophic and mesotrophic lakes showed that one or a few discrete water quality observations using conventional monitoring can yield a clear over- or underestimation of the overall water quality in a lake. The use of TM-type satellite instruments in addition to routine monitoring results substantially increases the number of lakes for which water quality information can be obtained. The preliminary results indicated that coloured dissolved organic matter (CDOM) can be estimated with TM-type satellite instruments, which could possibly be utilised as an aid in estimating the role of lakes in global carbon budgets. Based on the results of reflectance modelling and experimental data, MERIS satellite instrument has optimal or near-optimal channels for the estimation of turbidity, chlorophyll a and CDOM in Finnish lakes. MERIS images with a 300 m spatial resolution can provide water quality information in different parts of large and medium-sized lakes, and in filling in the gaps resulting from conventional monitoring. Algorithms that would not require simultaneous field data for algorithm training would increase the amount of remote sensing-based information available for lake monitoring. The MERIS Boreal Lakes processor, trained with the optical data and concentration ranges provided by this study, enabled turbidity estimations with good accuracy without the need for algorithm correction with field measurements, while chlorophyll a and CDOM estimations require further development of the processor. The accuracy of interpreting chlorophyll a via semi empirical algorithms can be improved by classifying lakes prior to interpretation according to their CDOM level and trophic status. Optical modelling indicated that the spectral diffuse attenuation coefficient can be estimated with reasonable accuracy from the measured water quality concentrations. This provides more detailed information on light attenuation from routine monitoring measurements than is available through the Secchi disk transparency. The results of this study improve the interpretation of lake water quality by remote sensing and encourage the use of remote sensing in lake monitoring.

Rhetoric and Representation : Exploring the Cultural Meaning of the Natural Sciences in Contemporary Popular Science Writing and Literature

Kirjallisuuden- ja kulttuurintutkimus on viimeisten kolmen vuosikymmenen aikana tullut yhä enenevässä määrin tietoiseksi tieteen ja taiteen suhteen monimutkaisesta luonteesta. Nykyään näiden kahden kulttuurin tutkimus muodostaa oman kenttänsä, jolla niiden suhdetta tarkastellaan ennen kaikkea dynaamisena vuorovaikutuksena, joka heijastaa kulttuurimme kieltä, arvoja ja ideologisia sisältöjä. Toisin kuin aiemmat näkemykset, jotka pitävät tiedettä ja taidetta toisilleen enemmän tai vähemmän vastakkaisina pyrkimyksinä, nykytutkimus lähtee oletuksesta, jonka mukaan ne ovat kulttuurillisesti rakentuneita diskursseja, jotka kohtaavat usein samankaltaisia todellisuuden mallintamiseen liittyviä ongelmia, vaikka niiden käyttämät metodit eroavatkin toisistaan. Väitöskirjani keskittyy yllä mainitun suhteen osa-alueista popularisoidun tietokirjallisuuden (muun muassa Paul Davies, James Gleick ja Richard Dawkins) käyttämän kielen ja luonnontieteistä ideoita ammentavan kaunokirjallisuuden (muun muassa Jeanette Winterson, Tom Stoppard ja Richard Powers) hyödyntämien keinojen tarkasteluun nojautuen yli 30 teoksen kattavaa aineistoa koskevaan tyylin ja teemojen tekstianalyysiin. Populaarin tietokirjallisuuden osalta tarkoituksenani on osoittaa, että sen käyttämä kieli rakentuu huomattavassa määrin sellaisille rakenteille, jotka tarjoavat mahdollisuuden esittää todellisuutta koskevia argumentteja mahdollisimman vakuuttavalla tavalla. Tässä tehtävässä monilla klassisen retoriikan määrittelemillä kuvioilla on tärkeä rooli, koska ne auttavat liittämään sanotun sisällön ja muodon tiukasti toisiinsa: retoristen kuvioiden käyttö ei näin ollen edusta pelkkää tyylikeinoa, vaan se myös usein kiteyttää argumenttien taustalla olevat tieteenfilosofiset olettamukset ja auttaa vakiinnuttamaan argumentoinnin logiikan. Koska monet aikaisemmin ilmestyneistä tutkimuksista ovat keskittyneet pelkästään metaforan rooliin tieteellisissä argumenteissa, tämä väitöskirja pyrkii laajentamaan tutkimuskenttää analysoimalla myös toisenlaisten kuvioiden käyttöä. Osoitan myös, että retoristen kuvioiden käyttö muodostaa yhtymäkohdan tieteellisiä ideoita hyödyntävään kaunokirjallisuuteen. Siinä missä popularisoitu tiede käyttää retoriikkaa vahvistaakseen sekä argumentatiivisia että kaunokirjallisia ominaisuuksiaan, kuvaa tällainen sanataide tiedettä tavoilla, jotka usein heijastelevat tietokirjallisuuden kielellisiä rakenteita. Toisaalta on myös mahdollista nähdä, miten kaunokirjallisuuden keinot heijastuvat popularisoidun tieteen kerrontatapoihin ja kieleen todistaen kahden kulttuurin dynaamisesta vuorovaikutuksesta. Nykyaikaisen populaaritieteen retoristen elementtien ja kaunokirjallisuuden keinojen vertailu näyttää lisäksi, kuinka tiede ja taide osallistuvat keskusteluun kulttuurimme tiettyjen peruskäsitteiden kuten identiteetin, tiedon ja ajan merkityksestä. Tällä tavoin on mahdollista nähdä, että molemmat ovat perustavanlaatuisia osia merkityksenantoprosessissa, jonka kautta niin tieteelliset ideat kuin ihmiselämän suuret kysymyksetkin saavat kulttuurillisesti rakentuneen merkityksensä.

Suomi kasvitieteen kieleksi : Elias Lönnrot termistön kehittäjänä

The development of botanical Finnish: Elias Lönnrot as the creator of new terminology In the 19th century the Finnish language was intentionally developed to meet the demands of civilised society and Finnish-language science. The development of the language involved several people from different fields of science. This study examines this enormous project in the field of botany. By which methods were scientific terms formed, and for which reasons were those terms used? Why has a certain word been chosen to represent a particular concept? The material of this study is the terminology of plant morphology in Finnish that Elias Lönnrot developed in the middle of the 19th century. The terms of plant morphology denote and describe the parts of the plant and the relationships between those parts. For instance, the terms emi pistill , hede stamen , terälehti petal and verholehti sepal , which are nowadays familiar in the general language, were used for the first time in Lönnrot s texts. The study integrates the methods of lexicology and terminology. In lexicology, the word and its various meanings serve as the focus, whereas the theory of terminology focuses on the concept and concept systems. A new, consciously developed terminology can be understood through the old, familiar vocabulary and structures as well as through the new, logical term system. Lönnrot s botanical terminology can be divided into three groups depending on their origin: 1) 19% of all terms have been accepted from the existing vocabulary and used in their original meanings, 2) 11% of all terms have been chosen from the existing vocabulary and used in the new, specific botanical meanings, and 3) 70% of all terms have been created on the basis of the existing vocabulary and used in the new, specific botanical meanings. Therefore, the study reveals that domestic materials primarily morphosemantic neologisms form the Finnish terminology of plant morphology. Characteristic of Lönnrot s botanical terms is the utilisation of the vocabulary of various Finnish dialects and particular repeating elements. Repeating elements include, for example, the prefixes that come from botanical Latin or Swedish as well as the particular Finnish derivation types. Such structures form term systems that reflect scientific concept systems. Two thirds of the created new words are formed loosely or precisely according to either Latin or Swedish terms; one third is formed completely differently from its equivalents in the foreign languages. Approximately half of the chosen terms are formed differently from the Latin and Swedish terms. It is worth noting that many loan translations use rare vocabulary from Finnish dialects as equivalents to foreign parts of terms. Lönnrot aimed to inspire scientific terminology with Finland s own language, thus making scientific text accessible to the Finnish agricultural population.

Mielikuvat transformatiivisen oppimisen välineenä : Tutkimus mielikuvaoppimisesta luontevan esiintymistavan löytämiseksi

The research focus of this study is imagery-based learning aimed at discovering an authentic way of public speaking in the context of transformative learning. The experiences of the participants in this learning process were also a subject of study. This learning process consisted of both guided and independent imagery-based training techniques. Critical reflection plays an important role in transformative learning. Actions, and interpretations and assumptions guiding them, are recognised and subjected to critical reflection. The goal of the learning process is an authentic and wide meaning perspective. Imagery-based training benefits from the gap between the new and the old experience of public speaking, and this is utilised as an activating factor for learning. The study is qualitative, looking at the imagery learning process and its outcomes from the subjective viewpoint of the participants personal experience. The imagery training acted as an intervention in the process of learning authentic public performance. The number of participants in this study was ten, five men and five women from four different working backgrounds. There were 80 individual training sessions, each attended by one person. The author conducted the imagery-based training. For each participant the learning process took roughly nine months. The research data consisted in the answers to questions in writing, diary entries, interviews and researcher notes. The data gathered by these methods was compiled into a personal report for each participant. The learners perceived authentic public speaking performance at the end of the learning process as wider, more flexible and more genuine than at the start of the training. Authenticity was defined through an internal process of becoming aware instead of some external characteristics. The learners understood the process of imagery learning as training for public performance and as an opportunity to become familiar with one s own personal way of acting and with one s own attitudes. They also perceived it as a tool that enabled the observation of personal experiences from different points of view. The learners reflected on ways of acting related to public speaking as well as on contributing factors to performance anxiety during the imagery learning process. Towards the end of the learning process, even critical reflection took place. The learners were categorized into three groups according to differences in their learning processes: the participants, the actors and the critical reflectors. This grouping reflected the relative amount of transformation in their learning processes. The participants became aware of their actions and assumptions. They took part in guided training sessions only. Worries in private life also had some consequences to their training in imagery learning. Apart from than becoming more conscious, the learning process did not yield much difference to the public speaking experiences of the participants. The actors attended both guided imagery training sessions and did individual training on their own. They became aware of their assumptions and their ways of acting. The encounter of the new and the old way of acting stimulated their learning. The actors advanced towards their own goals or even achieved them. The critical reflectors recognised their own assumptions and ways of acting and started to reflect critically on their own attitudes, as well as external attitudes and interpretations. Their assumptions, interpretations and experiences of public performance started to change in a positive direction. The learning process of the critical reflectors was functioning as a transformative process. This learning process revealed old assumptions hindering learning and old ways of acting resulting from these assumptions, thus opening up an opportunity for critical reflection and transformation. Avainsanat Nyckelord imagery learning, imagery-based training, transformative learning, reflection, critical reflection, public speaking anxiety, authentic public performance

Erityistä tukea tarvitsevan taaperon päiväkotiryhmään sopeutuminen : Monitapaustutkimus vuorovaikutussuhteista ja niiden rakentumisesta

How toddlers with special needs adjust to the daycare setting A multiple case study of how the relationships with adults and children are built The aim in this study is to describe how toddlers with special needs adjust to daycare. The emotional well-being and involvement in daycare activities of toddlers are especially investigated in this study. The relationship and how it is built between an adult and a child, a child and a child is examined. The daycare is examined through the socio-cultural theory as a pedagogical institution, where the child adapts by participating in social and cultural activities with the others. The development of the child is the result of the experiences that are gained through the constant relationship between the child, the family and social context. By the attachment theory the inner self-regulation, that allows the child safely adapt to new situations, develops most in the relationship between the child under 3years of age and the attending adult. The relationships between toddlers in daycare are usually built by the coincidental encounters in play and daily activities. In these relationships, the toddler gets the information of themselves and the other children. The complexity of the rules in the setting that organize the social action is challenging for the children and they need constant support from the adults. The participants of the study were five toddlers with special needs. When applying to daycare they were less than three years old and they got the specialist statement for their special needs, and the reference for daycare. The children were observed by recording their attending in the daycare once in the 3-4 months from the first day in daycare. Approximately 15 hours of material that was analysed with the Transana-program. The qualitative material was analysed by first collecting a descriptive model that explains and theorises the phenomenon. By the summery of the narrative it is placed a hypothesis that is tested by quantitative methods using correlations and variance analyses and general linear modeling that is used to count the differences between repeated measures and connections between different variables. The results of the study are built theoretically for the consistent conception between the theory and the findings in research. The toddlers in the study were all dependent on the support given by the adults in all the situations in the daycare. They could not associate with the other children without the support of the adults and their involvement in activities was low. The engagement of an adult in interaction was necessary for the children’s involvement in activities, and the co-operation with the other children. The engagement of teachers was statistically significantly higher than the engagement of other professions.

Zebrafish as a model of Parkinson's disease

Parkinson’s disease (PD) is the second most common neurodegenerative disease among the elderly. Its etiology is unknown and no disease-modifying drugs are available. Thus, more information concerning its pathogenesis is needed. Among other genes, mutated PTEN-induced kinase 1 (PINK1) has been linked to early-onset and sporadic PD, but its mode of action is poorly understood. Most animal models of PD are based on the use of the neurotoxin 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP). MPTP is metabolized to MPP+ by monoamine oxidase B (MAO B) and causes cell death of dopaminergic neurons in the substantia nigra in mammals. Zebrafish has been a widely used model organism in developmental biology, but is now emerging as a model for human diseases due to its ideal combination of properties. Zebrafish are inexpensive and easy to maintain, develop rapidly, breed in large quantities producing transparent embryos, and are readily manipulated by various methods, particularly genetic ones. In addition, zebrafish are vertebrate animals and results derived from zebrafish may be more applicable to mammals than results from invertebrate genetic models such as Drosophila melanogaster and Caenorhabditis elegans. However, the similarity cannot be taken for granted. The aim of this study was to establish and test a PD model using larval zebrafish. The developing monoaminergic neuronal systems of larval zebrafish were investigated. We identified and classified 17 catecholaminergic and 9 serotonergic neuron populations in the zebrafish brain. A 3-dimensional atlas was created to facilitate future research. Only one gene encoding MAO was found in the zebrafish genome. Zebrafish MAO showed MAO A-type substrate specificity, but non-A-non-B inhibitor specificity. Distribution of MAO in larval and adult zebrafish brains was both diffuse and distinctly cellular. Inhibition of MAO during larval development led to markedly elevated 5-hydroxytryptamine (serotonin, 5-HT) levels, which decreased the locomotion of the fish. MPTP exposure caused a transient loss of cells in specific aminergic cell populations and decreased locomotion. MPTP-induced changes could be rescued by the MAO B inhibitor deprenyl, suggesting a role for MAO in MPTP toxicity. MPP+ affected only one catecholaminergic cell population; thus, the action of MPP+ was more selective than that of MPTP. The zebrafish PINK1 gene was cloned in zebrafish, and morpholino oligonucleotides were used to suppress its expression in larval zebrafish. The functional domains and expression pattern of zebrafish PINK1 resembled those of other vertebrates, suggesting that zebrafish is a feasible model for studying PINK1. Translation inhibition resulted in cell loss of the same catecholaminergic cell populations as MPTP and MPP+. Inactivation of PINK1 sensitized larval zebrafish to subefficacious doses of MPTP, causing a decrease in locomotion and cell loss in one dopaminergic cell population. Zebrafish appears to be a feasible model for studying PD, since its aminergic systems, mode of action of MPTP, and functions of PINK1 resemble those of mammalians. However, the functions of zebrafish MAO differ from the two forms of MAO found in mammals. Future studies using zebrafish PD models should utilize the advantages specific to zebrafish, such as the ability to execute large-scale genetic or drug screens.

The function of Bmps and Runx2 in normal tooth development and in the pathogenesis of cleidocranial dysplasia

The development of many embryonic organs is regulated by reciprocal and sequential epithelial-mesenchymal interactions. These interactions are mediated by conserved signaling pathways that are reiteratively used. Cleidocranial dysplasia (CCD) is a congenital syndrome where both bone and tooth development is affected. The syndrome is characterized by short stature, abnormal clavicles, general bone dysplasia, and supernumerary teeth. CCD is caused by mutations in RUNX2, a transcription factor that is a key regulator of osteoblast differentiation and bone formation. The first aim of this study was to analyse the expression of a family of key signal molecules, Bone morphogenetic protein (Bmp) at different stages of tooth development. Bmps have a variety of functions and they were originally discovered as signals inducing ectopic bone formation. We performed a comparative in situ hybridisation analysis of the mRNA expression of Bmp2-7 from initiation of tooth development to differentiation of dental hard tissues. The expression patterns indicated that the Bmps signal between the epithelial and mesenchymal tissues during initiation and morphogenesis of tooth development, as well as during the differentiation of odontoblasts and ameloblasts. Furthermore, they are also part of the signalling networks whereby the enamel knot regulates the patterning of tooth cusps. The second aim was to study the role of Runx2 during tooth development and thereby to gain better understanding of the pathogenesis of the tooth phenotype in CCD. We analysed the tooth phenotype of Runx2 knockout mice and examined the patterns and regulation of Runx2 gene expression.. The teeth of wild-type and Runx2 mutant mice were compared by several methods including in situ hybridisation, tissue culture, bead implantation experiments, and epithelial-mesenchymal recombination studies. Phenotypic analysis of Runx2 -/- mutant tooth development showed that teeth failed to advance beyond the bud stage. Runx2 expression was restricted to dental mesenchyme between the bud and early bell stages of tooth development and it was regulated by epithelial signals, in particular Fgfs. We searched for downstream targets of Runx2 by comparative in situ hybridisation analysis. The expression of Fgf3 was downregulated in the mesenchyme of Runx2 -/- teeth. Shh expression was absent from the enamel knot in the lower molars of Runx2 -/- and reduced in the upper molars. In conclusion, these studies showed that Runx2 regulates key epithelial-mesenchymal interactions that control advancing tooth morphogenesis and histodifferentiation of the epithelial enamel organ. In addition, in the upper molars of Runx2 mutants extra buddings occured at the palatal side of the tooth bud. We suggest that Runx2 acts as an inhibitor of successional tooth formation by preventing advancing development of the buds. Accordingly, we propose that RUNX2 haploinsuffiency in humans causes incomplete inhibition of successional tooth formation and as a result supernumerary teeth.