Consumer Evaluation of Hybrid Innovations (summary section only)

Hybrid innovations, or new products that combine two existing product categories into one, are increasingly popular in today’s marketplace. Despite this proliferation, few studies address them. The purpose of this thesis is to examine consumer evaluation of hybrid innovations by focusing on consumer categorization of such innovations and on factors contributing positively and negatively to their evaluation. This issue is examined by means of three studies. The first study addresses the proportion of consumers categorizing hybrid products as single- versus dual-purpose, what contributes to such a categorization, what differences can be found between the two groups, and if categorization can and should be included in models of innovation adoption. The second study expands on the scope by including motivation as a predictor of consumer evaluation and examines two cognitive and affective factors and their differential impact on innovation evaluation. Finally, the third study examines the product comparisons single- versus dual-purpose categorization induce. These three essays together build up a broader understanding of hybrid innovation evaluation. The thesis uses theories from both psychology and marketing to examine the issues at hand. Conceptual combination and analogical learning theories from psychology are used to comprehend categorization and knowledge transfer. From marketing, consumer behavior and innovation adoption studies are addressed to better understand the link between categorization and product evaluation and the factors contributing to product evaluation. The main results of the current thesis are that (1) most consumers categorize hybrid products as single- and not as dual-purpose products, (2) consumers that categorize them as dual-purpose find them more attractive (3) motivation has a significant effect on consumer evaluation of innovations; cognitive factors promote an emphasis on product net benefits, whereas affective factors induce consumers to consider product meaning in the form of categorization and perceived product complexity, (4) categorization constrains subsequent product evaluation, and (5) categorization can and should be included to models of innovation adoption. Maria Sääksjärvi is associated with CERS, the Center for Relationship Marketing and Service Management at the Swedish School of Economics and Business Administration

The Influence of Constantinople on Middle Byzantine Architecture (843-1204) : A typological and morphological approach at the provincial level.

The influence of the architecture of the Byzantine capital spread to the Mediterranean provinces with travelling masters and architects. In this study the architecture of the Constantinopolitan School has been detected on the basis of the typology of churches, completed by certain morphological aspects when necessary. The impact of the Constantinopolitan workshops appears to have been more important than previously realized. This research revealed that the Constantinopolitan composite domed inscribed-cross type or cross-in-square spread everywhere to the Balkans and it was assumed soon by the local schools of architecture. In addition, two novel variants were invented on the basis of this model: the semi-composite type and the so-called Athonite type. In the latter variant lateral conches, choroi, were added for liturgical reasons. Instead, the origin of the domed ambulatory church was partly provincial. One result of this study is that the origin of the Middle Byzantine domed octagonal types was traced to Constantinople. This is attested on the basis of the archaeological evidence. Also some other architectural elements that have not been preserved in the destroyed capital have survived at the provincial level: the domed hexagonal type, the multi-domed superstructure, the pseudo-octagon and the narthex known as the lite. The Constantinopolitan architecture during the period in question was based on the Early Christian and Late Antique forms, practices and innovations and this also emerges at the provincial level.

Kehittävän kuntoutuksen mahdollisuudet. : Tutkimus Aslak -kuntoutuksen työkytkennän ja asiakkuuden rakentumisesta.

The possibilities of developmental rehabilitation. A study on the construction of work relatedness and the customer in Aslak rehabilitation The challenge of work-related rehabilitation is to anticipate the factors threatening work ability and to affect them. The purpose of this study was to analyze how work-related rehabilitation is constructed in practice and what are the challenges and, at the same time, the possibilities of an innovative transformation of rehabilitation when trying to achive this goal. The theoretical basis is cultural-historical activity theory and developmental work research. Based on a historical analysis, I studied rehabilitation activity empirically using the data gathered from one Aslak programme (Aslak = occupationally oriented medical rehabilitation) over two years. I described and analysed the construction of Aslak using ethnographic data and interviews. The data includes audio- and video-recordings of the Aslak course, fieldnotes, documents and other materials used in the course. The study aimed to reveal rehabilitation practices from different perspectives carried out by different stakeholders and participants in the Aslak course. It focused on the Aslak trajectory produced by a multiorganizational subject. I analyzed the rehabilitation activity using the method of ethnographic analysis of infrastructure. The method of analyzing the construction of the object of rehabilititation the customer was a membership categorization analysis (MCD) based on the ethnomethodological research tradition. I analyzed the meanings denoting customers given by different parties during one Aslak process and the relations between the meanings. Based on this analysis, I studied the disturbances, ruptures, and innovations in the rehabilitation activity. The results of the study show that the infrastructure of Aslak has different basic ideas. Aslak is constructed most explicitly on the infrastructure of medical rehabilitation. The second layer has been provided with some tools of identifying and preventing well-defined occupation-specific load factors. However, it has failed to perform a new structure, as Aslak has encountered, at the same time, rapid changes in working life. The study identified some promising markers representing new kinds of work-related rehabilitation ideas, but they proved to be incomplete and fragile. As a consequence of the multilayered infrastructure, the contents of the Aslak course were split into fragmented phases and disconnected themes, which were blocked in by the master idea of medical orientation. Its relationship to work remained weak and obscure. The categorizations of customers in Aslak were manifold and contradictory. According to the results, the possibilities for transforming work-related rehabilitation lie both in changing the orientation to the customer to be more relevant to changing working life and forging the infrastructural innovations related to this change. The results showed that a new work-relatedeness would be difficult but possible to construct. What is needed is the construction of an infrastructure that will support a coherent master idea of work-related rehabilitation over the entire trajectory of a process. A shared idea of a rehabilitation object must be constructed in close collaboration between different stakeholders, such as Kela (the Social Insurance Institution of Finland), occupational health services, work organizations, and rehabilitation institutes. Key words: Aslak rehabilitation, work-related rehabilitation, development of rehabilitation, customer of rehabilitation, developmental work research, analysis of infrastructure, membership category analysis

The Networks of Learning in Technological Innovation : The Emergence of Collaboration Across Fields of Expertise

This study addresses four issues concerning technological product innovations. First, the nature of the very early phases or "embryonic stages" of technological innovation is addressed. Second, this study analyzes why and by what means people initiate innovation processes outside the technological community and the field of expertise of the established industry. In other words, this study addresses the initiation of innovation that occurs without the expertise of established organizations, such as technology firms, professional societies and research institutes operating in the technological field under consideration. Third, the significance of interorganizational learning processes for technological innovation is dealt with. Fourth, this consideration is supplemented by considering how network collaboration and learning change when formalized product development work and the commercialization of innovation advance. These issues are addressed through the empirical analysis of the following three product innovations: Benecol margarine, the Nordic Mobile Telephone system (NMT) and the ProWellness Diabetes Management System (PDMS). This study utilizes the theoretical insights of cultural-historical activity theory on the development of human activities and learning. Activity-theoretical conceptualizations are used in the critical assessment and advancement of the concept of networks of learning. This concept was originally proposed by the research group of organizational scientist Walter Powell. A network of learning refers to the interorganizational collaboration that pools resources, ideas and know-how without market-based or hierarchical relations. The concept of an activity system is used in defining the nodes of the networks of learning. Network collaboration and learning are analyzed with regard to the shared object of development work. According to this study, enduring dilemmas and tensions in activity explain the participants' motives for carrying out actions that lead to novel product concepts in the early phases of technological innovation. These actions comprise the initiation of development work outside the relevant fields of expertise and collaboration and learning across fields of expertise in the absence of market-based or hierarchical relations. These networks of learning are fragile and impermanent. This study suggests that the significance of networks of learning across fields of expertise becomes more and more crucial for innovation activities.

Post-industrial Intervention : An Activity-Theoretical Expedition Tracing the Proximal Development of Forms of Conducting Interventions

Ei saatavilla

Keltaista ja kimaltavaa : kodin ja koulun yhteistyöstä koulun ja kodin yhteyteen

Through this study I aim to portray connections between home and school through the patterns of thought and action shared in everyday life in a certain community. My observations are primarily based upon interviews, writings and artwork by people from home (N=32) and school (N=13) contexts. Through the stories told, I depict the characters and characteristic features of the home-school interaction by generations. According to the material, in the school days of the grandparents the focus was on discipline and order. For the parents, the focus had shifted towards knowledge, while for the pupils today, the focus lies on evaluation, through which the upbringing of the child is steered towards favourable outcomes. Teachers and those people at home hold partially different understandings of home-school interaction, both of its manifested forms and potentials. The forms of contact in use today are largely seen as one-sided. Yearning for openness and regularity is shared by both sides, yet understood differently. Common causes for failure are said to lie in plain human difficulties in communication and social interaction, but deeply rooted traditions regarding forms of contact also cast a shadow on the route to successful co-operation. This study started around the idea, that home-school interaction should be steered towards the ex-change of constructive ideas between both the home and school environments. Combining the dif-ferent views gives to something to build upon. To test this idea, I drafted a practice period, which was implemented in a small pre-school environment in the fall of 1997. My focus of interest in this project was on the handling of ordinary life information in the schools. So I combined individual views, patterns of knowledge and understanding of the world into the process of teaching. Works of art and writings by the informants worked as tools for information processing and as practical forms of building home-school interaction. Experiences from the pre-school environ-ment were later on echoed in constructing home-school interaction in five other schools. In both these projects, the teaching in the school was based on stories, thoughts and performances put to-gether by the parents, grandparents and children at home. During these processes, the material used in this study, consisting of artwork, writings and interviews (N=501), was collected. The data shows that information originating from the home environments was both a motivating and interesting addition to the teaching. There even was a sense of pride when assessing the seeds of knowledge from one’s own roots. In most cases and subjects, the homegrown information content was seamlessly connected to the functions of school and the curriculum. This project initiated thought processes between pupils and teachers, adults, children and parents, teachers and parents, and also between generations. It appeared that many of the subjects covered had not been raised before between the various participant groups. I have a special interest here in visual expression and its various contextual meanings. There art material portrays how content matter and characteristic features of the adult and parent contexts reflect in the works of the children. Another clearly noticeable factor in the art material is the impact of time-related traditions and functions on the means of visual expression. Comparing the visual material to the written material reveals variances of meaning and possibilities between these forms of expression. The visual material appears to be related especially to portraying objects, action and usage. Processing through that making of images was noted to bring back memories of concrete structures, details and also emotions. This process offered the child an intensive social connection with the adults. In some cases, with children and adults alike, this project brought forth an ongoing relation to visual expression. During this study I end up changing the concept to ‘home-school collaboration’. This widely used concept guides and outlines the interaction between schools and homes. In order to broaden the field of possibilities, I choose to use the concept ‘school-home interconnection’. This concept forms better grounds for forming varying impressions and practices when building interactive contexts. This concept places the responsibility of bridging the connection-gap in the schools. Through the experiences and innovations of thought gained from these projects, I form a model of pedagogy that embraces the idea of school-home interconnection and builds on the various impres-sions and expressions contained in it. In this model, school makes use of the experiences, thoughts and conceptions from the home environment. Various forms of expression are used to portray and process this information. This joint evaluation and observation evolves thought patterns both in school and at home. Keywords: percieving, visuality, visual culture, art and text, visual expression, art education, growth in interaction, home-school collaboration, school-home interconnection, school-home interaction model.

Linnunkiikut ja kallen kaulukset : Kotitekoiset kuukautissiteet 1900-luvun alkupuolen Suomessa

The aim of this thesis was to study what kind of home-made menstrual pads were used in the early 20th century in Finland, how the home-made pads were made and which techniques and materials were used. The use and taking care of menstrual pads were also explored. The history of menstrual pads has been studied in Sweden, Germany and United States but none of those studies has concentrated on home-made pads. Instead, there are many studies about womanhood and menstruation. In many studies home-made menstrual pads are only briefly mentioned. Menstrual pads were not commonly used in Finland at the beginning of the 20th century, but already in the 1940s the use of menstrual pads had become common in every stratum of society. Home-made menstrual pads were used even until the 1960s. In Finland, factory-made disposable menstrual pads became common only in the 1930s and they were only slowly accepted. The study material consisted of nine interviews, three archival inquiries, health care guidebooks from 1893 to 1943 and authentic menstrual pads, menstrual belts and other objects related to them. The interviewed women were born between 1915 and 1939. The narrative approach was used in the study and it also guided the analysis. The interview and archival data were studied according to the basic rules of oral history studies. Literature consisted of publications from several disciplines. The extensive primary material played the most important role in this study. The reconstructions of the menstrual pads were made according to the interviewed women s advice. In Finland there were innumerable variations of home-made menstrual pads. The pads were most commonly crocheted and knitted either by hand or by knitting machine. Pads were also sewn of cloth, old bed linen or old underwear. The menstrual pads were self-made or made by a female relative. Word of mouth was important in spreading information on how to make pads, because there were hardly any instructions available. The biggest pads were 54 cm long and 13 cm wide. The most widely used pad model was a rectangle, which had triangle-shaped ends with a buttonhole or a loop. The pad was attached to the menstrual belt or to the buttons of the suspender belt. Knitted and crocheted pads had one, two or three layers. In sewn pads, there could be even more layers. Cellulose wadding or pieces of cloth could be placed inside the pad to increase the absorption ability. The experiences of the comfort of self-made pads varied. The crocheted and sewn pads were found chafing, knitted ones were found soft and comfortable. The menstrual pads were laborious to wash and boil in lye water. Therefore disposable pads made everyday life easier. The home-made menstrual pads were part of a unique tradition of handicrafts and folk culture. Hand-made pads were one of the most common handicraft products and were a part of every woman s life. Even so, the menstrual pads were unnoticeable. The large number of variations was probably caused by the silence around menstrual topics and by the lack of instructions for making pads. Variations are also explained by the uniqueness of every handicraft product. In Finland the home-made pads were used until relatively recent times. This was caused by the conditions of wartime and the following years and the rarity of commercial pads. Furthermore, until the late 20th century Finland was an agricultural society where all innovations spread slowly. Home-made menstrual pad was a secret handicraft of women and every woman needed to know how to make it by herself.

Essays on corporate governance, stakeholders, and restructuring

This dissertation consists of an introductory section and three theoretical essays analyzing the interaction of corporate governance and restructuring. The essays adopt an incomplete contracts approach and analyze the role of different institutional designs to facilitate the alignment of the objectives of shareholders and management (or employees) over the magnitude of corporate restructuring. The first essay analyzes how a firm's choice of production technology affects the employees' human capital investment. In the essay, the owners of the firm can choose between a specific and a general technology that both require a costly human capital investment by the employees. The specific technology is initially superior in using the human capital of employees but, in contrast to the general technology, it is not compatible with future innovations. As a result, anticipated changes in the specific technology diminish the ex ante incentives of the employees to invest in human capital unless the shareholders grant the employees specific governance mechanisms (a right of veto, severance pay) so as to protect their investments. The results of the first essay indicate that the level of protection that the shareholders are willing to offer falls short of the socially desirable one. Furthermore, when restructuring opportunities become more abundant, it becomes more attractive both socially and from the viewpoint of the shareholders to initially adopt the general technology. The second essay analyzes how the allocation of authority within the firm interacts with the owners' choice of business strategy when the ability of the owners to monitor the project proposals of the management is biased in favor of the status quo strategy. The essay shows that a bias in the monitoring ability will affect not only the allocation of authority within the firm but also the choice of business strategy. Especially, when delegation has positive managerial incentive effects, delegation turns out to be more attractive under the new business strategy because the improved managerial incentives are a way for the owners to compensate their own reduced information gathering ability. This effect, however, simultaneously makes the owners hesitant to switch the strategy since it would involve a more frequent loss of control over the project choice. Consequently, the owners' lack of knowledge of the new business strategy may lead to a suboptimal choice of strategy. The third essay analyzes the implications of CEO succession process for the ideal board structure. In this essay, the presence of the departing CEO on the board facilitates the ability of the board to find a matching successor and to counsel him. However, the ex-CEO's presence may simultaneously also weaken the ability of the board to restructure since the predecessor may use the opportunity to distort the successor's project choice. The results of the essay suggest that the extent of restructuring gains, the firm's ability to hire good outside directors and the importance of board's advisory role affect at which point and for how long the shareholders may want to nominate the predecessor to the board.

Vallankumous kotona! : Arkielämän visuaalinen murros 1960-luvun lopussa ja 1970-luvun alussa

Revolution at home! Visual Changes in Everyday Life in Finland in the Late 1960s and Early 1970s The purpose of my research was to investigate the visual changes in private homes in Finland during the 1960s and 1970s. The 1960s is often described as a turning point in Finnish life, a time when the society's previous agricultural orientation began to give way first to an industrial orientation and then, by the end of the 1970s, to a service orientation. My title refers to three elements in the transition period: the question of daily life; the timeframe; and the visual changes observable in private homes, which in retrospect signalled a kind of revolution in the social orientation. Those changes appeared not only in colours and designs but also in the forms and materials of household objects. My premise is that analysing interiors from a historical perspective can reveal valuable information about Finnish society and social attitudes, information that might easily escape attention otherwise. I have used the time-honoured method of collecting narratives. As far back as Aristotle, formulating narratives has been a means of gaining knowledge. By collecting and classifying narratives about the 1960s and 1970s, it is possible to gain new insight into these important decades. The archetypal 1960s narrative, involving student demonstrations and young people's efforts to improve society, is well known. Less well known is the narrative that relates the changes going on in daily life. Substantially the study focuses mainly on fabrics, porcelain ware and the use of plastics. Marimekko's style is especially important when following innovations in the 1950s, 1960s and 1970s. Porcelain production at the Arabia factory was another element that had a great influence on the look of Finnish homes and kitchens; and a further widespread phenomenon of the late 1960s and early 1970s was the use of plastics in many different forms. Further evidence was sought in Anttila department store mail catalogues, which displayed products that were marketed on a large scale, as well as in magazines such as Avotakka. The terminal point of the visual evolution is the real homes, as seen in the questionnaire "Homemade". I have used the 800 pages of the oral history text that respondents of the Finnish Literature Society have written about their first home in the 1960s. I also used archival material on actual homes in Helsinki from the archives of the Helsinki City Museum. The basic story is the elite narrative, which was produced by students in the 1960s. My main narrative from the same time is visual change in everyday life in the late 1960s and early 1970s. I have classified the main narrative of visual change into four subcategories: the narrative of national ideas, the narrative of a better standard of living, the narrative of objects in the culture of everyday life and the narrative of changing colour and form.

Analyzing changes in macro-level drivers of country-specific emissions : The role of consumption, technology and trade

Industrial ecology is an important field of sustainability science. It can be applied to study environmental problems in a policy relevant manner. Industrial ecology uses ecosystem analogy; it aims at closing the loop of materials and substances and at the same time reducing resource consumption and environmental emissions. Emissions from human activities are related to human interference in material cycles. Carbon (C), nitrogen (N) and phosphorus (P) are essential elements for all living organisms, but in excess have negative environmental impacts, such as climate change (CO2, CH4 N2O), acidification (NOx) and eutrophication (N, P). Several indirect macro-level drivers affect emissions change. Population and affluence (GDP/capita) often act as upward drivers for emissions. Technology, as emissions per service used, and consumption, as economic intensity of use, may act as drivers resulting in a reduction in emissions. In addition, the development of country-specific emissions is affected by international trade. The aim of this study was to analyse changes in emissions as affected by macro-level drivers in different European case studies. ImPACT decomposition analysis (IPAT identity) was applied as a method in papers I III. The macro-level perspective was applied to evaluate CO2 emission reduction targets (paper II) and the sharing of greenhouse gas emission reduction targets (paper IV) in the European Union (EU27) up to the year 2020. Data for the study were mainly gathered from official statistics. In all cases, the results were discussed from an environmental policy perspective. The development of nitrogen oxide (NOx) emissions was analysed in the Finnish energy sector during a long time period, 1950 2003 (paper I). Finnish emissions of NOx began to decrease in the 1980s as the progress in technology in terms of NOx/energy curbed the impact of the growth in affluence and population. Carbon dioxide (CO2) emissions related to energy use during 1993 2004 (paper II) were analysed by country and region within the European Union. Considering energy-based CO2 emissions in the European Union, dematerialization and decarbonisation did occur, but not sufficiently to offset population growth and the rapidly increasing affluence during 1993 2004. The development of nitrogen and phosphorus load from aquaculture in relation to salmonid consumption in Finland during 1980 2007 was examined, including international trade in the analysis (paper III). A regional environmental issue, eutrophication of the Baltic Sea, and a marginal, yet locally important source of nutrients was used as a case. Nutrient emissions from Finnish aquaculture decreased from the 1990s onwards: although population, affluence and salmonid consumption steadily increased, aquaculture technology improved and the relative share of imported salmonids increased. According to the sustainability challenge in industrial ecology, the environmental impact of the growing population size and affluence should be compensated by improvements in technology (emissions/service used) and with dematerialisation. In the studied cases, the emission intensity of energy production could be lowered for NOx by cleaning the exhaust gases. Reorganization of the structure of energy production as well as technological innovations will be essential in lowering the emissions of both CO2 and NOx. Regarding the intensity of energy use, making the combustion of fuels more efficient and reducing energy use are essential. In reducing nutrient emissions from Finnish aquaculture to the Baltic Sea (paper III) through technology, limits of biological and physical properties of cultured fish, among others, will eventually be faced. Regarding consumption, salmonids are preferred to many other protein sources. Regarding trade, increasing the proportion of imports will outsource the impacts. Besides improving technology and dematerialization, other viewpoints may also be needed. Reducing the total amount of nutrients cycling in energy systems and eventually contributing to NOx emissions needs to be emphasized. Considering aquaculture emissions, nutrient cycles can be partly closed through using local fish as feed replacing imported feed. In particular, the reduction of CO2 emissions in the future is a very challenging task when considering the necessary rates of dematerialisation and decarbonisation (paper II). Climate change mitigation may have to focus on other greenhouse gases than CO2 and on the potential role of biomass as a carbon sink, among others. The global population is growing and scaling up the environmental impact. Population issues and growing affluence must be considered when discussing emission reductions. Climate policy has only very recently had an influence on emissions, and strong actions are now called for climate change mitigation. Environmental policies in general must cover all the regions related to production and impacts in order to avoid outsourcing of emissions and leakage effects. The macro-level drivers affecting changes in emissions can be identified with the ImPACT framework. Statistics for generally known macro-indicators are currently relatively well available for different countries, and the method is transparent. In the papers included in this study, a similar method was successfully applied in different types of case studies. Using transparent macro-level figures and a simple top-down approach are also appropriate in evaluating and setting international emission reduction targets, as demonstrated in papers II and IV. The projected rates of population and affluence growth are especially worth consideration in setting targets. However, sensitivities in calculations must be carefully acknowledged. In the basic form of the ImPACT model, the economic intensity of consumption and emission intensity of use are included. In seeking to examine consumption but also international trade in more detail, imports were included in paper III. This example demonstrates well how outsourcing of production influences domestic emissions. Country-specific production-based emissions have often been used in similar decomposition analyses. Nevertheless, trade-related issues must not be ignored.

SPECT-aided diagnostics and genetic risk factors in Parkinson's disease

Hypokinesia, rigidity, tremor, and postural instability are the cardinal symptoms of Parkinson s disease (PD). Since these symptoms are not specific to PD the diagnosis may be uncertain in early PD. Etiology and pathogenesis of PD remain unclear. There is no neuroprotective therapy. Genetic findings are expected to reveal metabolic routes in PD pathogenesis and thereby eventually lead to therapeutic innovations. In this thesis, we first aimed to study the usefulness and accuracy of 123I-b-CIT SPECT in the diagnosis of PD in a consecutive clinic-based material including various movement disorders. We subsequently a genetic project to identify genetic risk factors for sporadic PD using a candidate gene approach in a case-control setting including 147 sporadic PD patients and 137 spouse controls. Dopamine transporter imaging by 123I-b-CIT SPECT could distinguish PD from essential tremor, drug-induced parkinsonism, dystonia and psychogenic parkinsonism. However, b-CIT uptake in Parkinson plus syndromes (PSP and multiple system atrophy) and dementia with Lewy bodies was not significantly different from PD. 123I-b-CIT SPECT could not reliably differentiate PD from vascular parkinsonism. 123I-b-CIT SPECT was 100% sensitive and specific in the diagnosis of PD in patients younger than 55 years but less specific in older patients, due to differential distribution of the above conditions in the younger and older age groups. 123I-b-CIT SPECT correlated with symptoms and detected bilateral nigrostriatal defect in patients whose PD was still in unilateral stage. Thus, in addition to as a differential diagnostic aid, 123I-b-CIT SPECT may be used to detect PD early, even pre-symptomatically in at-risk individuals. 123I-b-CIT SPECT was used to aid in the collection of patients to the genetic studies. In the genetic part of this thesis we found an association between PD and a polymorphic CAG-repeat in POLG1 gene encoding the catalytic subunit of mitochondrial polymerase gamma. The CAG-repeat encodes a polyglutamine tract (polyQ), the two most common lengths of which are 10Q (86-90%) and 11Q. In our Finnish material, the rarer non-10Q or non-11Q length variants (6Q-9Q, 12Q-14Q, 4R+9Q) were more frequent in patients than in spouse controls (10% vs. 3.5 %, p=0.003), or population controls (p=0.001). Therefore, we performed a replication study in 652 North American PD patients and 292 controls. Non-10/11Q alleles were more common in the US PD patients compared to the controls but the difference did not reach statistical significance (p=0.07). This larger data suggested our original definition of variant length allele might need reconsideration. Most previous studies on phenotypic effects of POLG1 polyQ have defined 10Q as the only normal allele. Non-10Q alleles were significantly more common in patients compared to the controls (17.3% vs. 12.3 %, p= 0.005). This association between non-10Q length variants and PD remained significant when compared to a larger set of 1541 literature controls (p=0.00005). In conclusion, POLG1 polyQ alleles other than 10Q may predispose to PD. We did not find association between PD and parkin or DJ-1, genes underlying autosomal recessive parkinsonism. The functional Val158Met polymorphism, which affects the catalytic effect of COMT enzyme, and another coding polymorphism in COMT were not associated with PD in our patient material. The APOE e2/3/4 polymorphism modifies risk for Alzheimer s disease and prognosis of for example brain trauma. APOE promoter and enhancer polymorphisms 219G/T and +113G/C, and APOE e3 haplotypes, have also been shown to modify the risk of Alzheimer s disease but not reported in PD. No association was found between PD and APOE e2/3/4 polymorphism, the promoter or enhancer polymorphisms, or the e3 haplotypes.

The Finnish Competition State and Entrepreneurial Policies in the Helsinki Region

The thesis examines the intensification and characteristics of a policy that emphasises economic competitiveness in Finland during the 1990s and early 2000s. This accentuation of economic objectives is studied at the level of national policy-making as well as at the regional level through the policies and strategies of cities and three universities in the Helsinki region. By combining the analysis of state policies, urban strategies and university activities, the study illustrates the pervasiveness of the objective of economic competitiveness and growth across these levels and sheds light on the features and contradictions of these policies on a broad scale. The thesis is composed of five research articles and a summary article. At the level of national policies, the central focus of the thesis is on the growing role of science and technology policy as a state means to promote structural economic change and its transformation towards a broader, yet ambivalent concept of innovation policy. This shift brings forward a tension between an increasing emphasis on economic aspects – innovations and competitiveness – as well as the expanding scope of issues across a wide range of policy sectors that are being subsumed under this market- and economy oriented framework. Related to science and technology policy, attention is paid to adjustments in university policy in which there has been increasing pressure for efficiency, rationalisation and commercialisation of academic activities. Furthermore, political efforts to build an information society through the application of information and communication technologies are analysed with particular attention to the balance between economic and social objectives. Finally, changes in state regional policy priorities and the tendency towards competitiveness are addressed. At the regional level, the focus of the thesis is on the policies of the cities in Finland’s capital region as well as strategies of three universities operating in the region, namely the University of Helsinki, Helsinki University of technology and Helsinki School of Economics. As regards the urban level, the main focus is on the changes and characteristics of the urban economic development policy of the City of Helsinki. With respect to the universities, the thesis examines their attempts to commercialise research and thus bring academic research closer to economic interests, and pays particular attention to the contradictions of commercialisation. Related to the universities, the activities of three intermediary organisations that the universities have established in order to increase cooperation with industry are analysed. These organisations are the Helsinki Science Park, Otaniemi International Innovation Centre and LTT Research Ltd. The summary article provides a synthesis of the material presented in the five original articles and relates the results of the articles to a broader discussion concerning the emergence of competition states and entrepreneurial cities and regions. The main points of reference are Bob Jessop’s and Neil Brenner’s theses on state and urban-regional restructuring. The empirical results and considerations from Finland and the Helsinki region are used to comment on, specify and criticise specific parts of the two theses.

Regulating Food Consumption : Studies of change and variation in Europe

The role of people as buyers and eaters of food has changed significantly. From being protected by a paternalistic welfare state, people appear to be accorded more freedom and responsibility as individuals, where attention is redirected from the state towards market relations. Many have asserted that these changes are accompanied by fragmentation, individualisation, and privatisation, leading to individual uncertainty and lack of confidence. But empirical observations do not always confirm this, distrust is not necessarily growing and while responsibilities may change, the state still plays an active role. This dissertation explores changing relationships between states and markets, on the one hand, and ordinary people in their capacities as consumers and citizens, on the other. Do we see the emergence of new forms of regulation of food consumption? If so, what is the scope and what are the characteristics? Theories of regulation addressing questions about individualisation and self-governance are combined with a conceptualisation of consumption as processes of institutionalisation, involving daily routines, the division of labour between production and consumption, and the institutional field in which consumption is embedded. The analyses focus on the involvement of the state, food producers and scientific, first of all nutritional, expertise in regulating consumption, and on popular responses. Two periods come out as important, first when the ideas of “designing the good life” emerged, giving the state a very particular role in regulating food consumption, and, second, when this “designing” is replaced by ideas of choice and individual responsibility. One might say that “consumer choice” has become a mode of regulation. I use mainly historical studies from Norway to analyse the shifting role of the state in regulating food consumption, complemented with population surveys from six European countries to study how modernisation processes are associated with trust. The studies find that changing regulation is not only a question of societal or state vs individual responsibilities. Degrees of organisation and formalisation are important as well. While increasing organisation may represent discipline and abuses of power (including exploitation of consumer loyalty), organisation can also, to the consumer, provide higher predictability, systems to deal with malfeasance, and efficiency which may provide conditions for acting. The welfare state and the neo-liberal state have very different types of solutions. The welfare state solution is based on (national) egalitarianism, paternalism and discipline (of the market as well as households). Such solutions are still prominent in Norway. Individualisation and self-regulation may represent a regulatory response not only to a declining legitimacy of this kind of interventionism, but also increasing organisational complexity. This is reflected in large-scale re-regulation of markets as well as in relationships with households and consumers. Individualisation of responsibility is to the consumer not a matter of the number of choices that are presented on the shelves, but how choice as a form of consumer based involvement is institutionalised. It is recognition of people as “end-consumers”, as social actors, with systems of empowerment politically as well as via the provisioning system. ‘Consumer choice’ as a regulatory strategy includes not only communicative efforts to make people into “choosing consumers”, but also the provision of institutions which recognise consumer interests and agency. When this is lacking we find distrust as representing powerlessness. Individual responsibility-taking represents agency and is not always a matter of loyal support to shared goals, but involves protest and creativity. More informal (‘communitarian’) innovations may be an indication of that, where self-realisation is intimately combined with responsibility for social problems. But as solutions to counteract existing imbalances of power in the food market the impacts of such initiatives are probably more as part of consumer mobilisation and politicisation than as alternative provisioning.

Adoption processes for EDM, EDI and BIM technologies in the construction industry

Three strategically important uses of IT in the construction industry are the storage and management of project documents on webservers (EDM), the electronic handling of orders and invoices between companies (EDI) and the use of 3-D models including non-geometrical attributes for integrated design and construction (BIM). In a broad longitudinal survey study of IT use in the Swedish Construction Industry the extent of use of these techniques was measured in 1998, 2000 and 2007. The results showed that EDM and EDI are currently already well-established techniques whereas BIM, although it promises the biggest potential benefits to the industry, only seems to be at the beginning of adoption. In a follow-up to the quantitative studies, the factors affecting the decisions to implement EDM, EDI and BIM as well as the actual adoption processes, were studied using semi-structured interviews with practitioners. The theoretical basis for the interview studies was informed by theoretical frameworks from IT-adoption theory, where in particular the UTAUT model has provided the main basis for the analyses presented here. The results showed that the decisions to take the above technologies into use are made on three differ- ent levels: the individual level, the organizational level in the form of a company, and the organiza- tional level in the form of a project. The different patterns in adoption can to some part be explained by where the decisions are mainly taken. EDM is driven from the organisation/project level, EDI mainly from the organisation/company level, and BIM is driven by individuals pioneering the technique.

Intraday Linkages across International Equity Markets

Utilizing concurrent 5-minute returns, the intraday dynamics and inter-market dependencies in international equity markets were investigated. A strong intraday cyclical autocorrelation structure in the volatility process was observed to be caused by the diurnal pattern. A major rise in contemporaneous cross correlation among European stock markets was also noticed to follow the opening of the New York Stock Exchange. Furthermore, the results indicated that the returns for UK and Germany responded to each other’s innovations, both in terms of the first and second moment dependencies. In contrast to earlier research, the US stock market did not cause significant volatility spillover to the European markets.