Towards real-time understanding of processes in pharmaceutical powder technology

There is a need for better understanding of the processes and new ideas to develop traditional pharmaceutical powder manufacturing procedures. Process analytical technology (PAT) has been developed to improve understanding of the processes and establish methods to monitor and control processes. The interest is in maintaining and even improving the whole manufacturing process and the final products at real-time. Process understanding can be a foundation for innovation and continuous improvement in pharmaceutical development and manufacturing. New methods are craved for to increase the quality and safety of the final products faster and more efficiently than ever before. The real-time process monitoring demands tools, which enable fast and noninvasive measurements with sufficient accuracy. Traditional quality control methods have been laborious and time consuming and they are performed off line i.e. the analysis has been removed from process area. Vibrational spectroscopic methods are responding this challenge and their utilisation have increased a lot during the past few years. In addition, other methods such as colour analysis can be utilised in noninvasive real-time process monitoring. In this study three pharmaceutical processes were investigated: drying, mixing and tabletting. In addition tablet properties were evaluated. Real-time monitoring was performed with NIR and Raman spectroscopies, colour analysis, particle size analysis and compression data during tabletting was evaluated using mathematical modelling. These methods were suitable for real-time monitoring of pharmaceutical unit operations and increase the knowledge of the critical parameters in the processes and the phenomena occurring during operations. They can improve our process understanding and therefore, finally, enhance the quality of final products.

Oppimisen kohteen ja oppijan vastavuoroinen kehitys : Teleyrityksen asiakaspalvelun työyhteisöjen oppimiskäytäntöjen uudistaminen osana teknologis-taloudellista kumousta

Reciprocal development of the object and subject of learning. The renewal of the learning practices of front-line communities in a telecommunications company as part of the techno-economical paradigm change. Current changes in production have been seen as an indication of a shift from the techno-economical paradigm of a mass-production era to a new paradigm of the information and communication technological era. The rise of knowledge management in the late 1990s can be seen as one aspect of this paradigm shift, as knowledge creation and customer responsiveness were recognized as the prime factors in business competition. However, paradoxical conceptions concerning learning and agency have been presented in the discussion of knowledge management. One prevalent notion in the literature is that learning is based on individuals’ voluntary actions and this has now become incompatible with the growing interest in knowledge-management systems. Furthermore, commonly held view of learning as a general process that is independent of the object of learning contradicts the observation that the current need for new knowledge and new competences are caused by ongoing techno-economic changes. Even though the current view acknowledges that individuals and communities have key roles in knowledge creation, this conception defies the idea of the individuals’ and communities’ agency in developing the practices through which they learn. This research therefore presents a new theoretical interpretation of learning and agency based on Cultural-Historical Activity Theory. This approach overcomes the paradoxes in knowledge-management theory and offers means for understanding and analyzing changes in the ways of learning within work communities. This research is also an evaluation of the Competence-Laboratory method which was developed as part of the study as a special application of Developmental Work Research methodology. The research data comprises the videotaped competence-laboratory processes of four front-line work communities in a telecommunications company. The findings reported in the five articles included in this thesis are based on the analyses of this data. The new theoretical interpretation offered here is based on the assessment that the findings reported in the articles represent one of the front lines of the ongoing historical transformation of work-related learning since the research site represents one of the key industries of the new “knowledge society”. The research can be characterized as elaboration of a hypothesis concerning the development of work related learning. According to the new theoretical interpretation, the object of activity is also the object of distributed learning in work communities. The historical socialization of production has increased the number of actors involved in an activity, which has also increased the number of mutual interdependencies as well as the need for communication. Learning practices and organizational systems of learning are historically developed forms of distributed learning mediated by specific forms of division of labor, specific tools, and specific rules. However, the learning practices of the mass production era become increasingly inadequate to accommodate the conditions in the new economy. This was manifested in the front-line work communities in the research site as an aggravating contradiction between the new objects of learning and the prevailing learning practices. The constituent element of this new theoretical interpretation is the idea of a work community’s learning as part of its collaborative mastery of the developing business activity. The development of the business activity is at the same time a practical and an epistemic object for the community. This kind of changing object cannot be mastered by using learning practices designed for the stable conditions of mass production, because learning has to change along the changes in business. According to the model introduced in this thesis, the transformation of learning proceeds through specific stages: predefined learning tasks are first transformed into learning through re-conceptualizing the object of the activity and of the joint learning and then, as the new object becomes stabilized, into the creation of new kinds of learning practices to master the re-defined object of the activity. This transformation of the form of learning is realized through a stepwise expansion of the work community’s agency. To summarize, the conceptual model developed in this study sets the tool-mediated co-development of the subject and the object of learning as the theoretical starting point for developing new, second-generation knowledge management methods. Key words: knowledge management, learning practice, organizational system of learning, agency

A capability-based view of organisational renewal : Combining opportunity- and advantage-seeking growth in large, established European and North American wood-industry companies

The purpose of this study was to extend understanding of how large firms pursuing sustained and profitable growth manage organisational renewal. A multiple-case study was conducted in 27 North American and European wood-industry companies, of which 11 were chosen for closer study. The study combined the organisational-capabilities approach to strategic management with corporate-entrepreneurship thinking. It charted the further development of an identification and classification system for capabilities comprising three dimensions: (i) the dynamism between firm-specific and industry-significant capabilities, (ii) hierarchies of capabilities and capability portfolios, and (iii) their internal structure. Capability building was analysed in the context of the organisational design, the technological systems and the type of resource-bundling process (creating new vs. entrenching existing capabilities). The thesis describes the current capability portfolios and the organisational changes in the case companies. It also clarifies the mechanisms through which companies can influence the balance between knowledge search and the efficiency of knowledge transfer and integration in their daily business activities, and consequently the diversity of their capability portfolio and the breadth and novelty of their product/service range. The largest wood-industry companies of today must develop a seemingly dual strategic focus: they have to combine leading-edge, innovative solutions with cost-efficient, large-scale production. The use of modern technology in production was no longer a primary source of competitiveness in the case companies, but rather belonged to the portfolio of basic capabilities. Knowledge and information management had become an industry imperative, on a par with cost effectiveness. Yet, during the period of this research, the case companies were better in supporting growth in volume of the existing activity than growth through new economic activities. Customer-driven, incremental innovation was preferred over firm-driven innovation through experimentation. The three main constraints on organisational renewal were the lack of slack resources, the aim for lean, centralised designs, and the inward-bound communication climate.

Plant secondary compounds and soil microbial processes in carbon and nitrogen cycling in relation to tree species

The aim of this study was to explore soil microbial activities related to C and N cycling and the occurrence and concentrations of two important groups of plant secondary compounds, terpenes and phenolic compounds, under silver birch (Betula pendula Roth), Norway spruce (Picea abies (L.) Karst) and Scots pine (Pinus sylvestris L.) as well as to study the effects of volatile monoterpenes and tannins on soil microbial activities. The study site, located in Kivalo, northern Finland, included ca. 70-year-old adjacent stands dominated by silver birch, Norway spruce and Scots pine. Originally the soil was very probably similar in all three stands. All forest floor layers (litter (L), fermentation layer (F) and humified layer (H)) under birch and spruce showed higher rates of CO2 production, greater net mineralisation of nitrogen and higher amounts of carbon and nitrogen in microbial biomass than did the forest floor layers under pine. Concentrations of mono-, sesqui-, di- and triterpenes were higher under both conifers than under birch, while the concentration of total water-soluble phenolic compounds as well as the concentration of condensed tannins tended to be higher or at least as high under spruce as under birch or pine. In general, differences between tree species in soil microbial activities and in concentrations of secondary compounds were smaller in the H layer than in the upper layers. The rate of CO2 production and the amount of carbon in the microbial biomass correlated highly positively with the concentration of total water-soluble phenolic compounds and positively with the concentration of condensed tannins. Exposure of soil to volatile monoterpenes and tannins extracted and fractionated from spruce and pine needles affected carbon and nitrogen transformations in soil, but the effects were dependent on the compound and its molecular structure. Monoterpenes decreased net mineralisation of nitrogen and probably had a toxic effect on part of the microbial population in soil, while another part of the microbes seemed to be able to use monoterpenes as a carbon source. With tannins, low-molecular-weight compounds (also compounds other than tannins) increased soil CO2 production and nitrogen immobilisation by soil microbes while the higher-molecular-weight condensed tannins had inhibitory effects. In conclusion, plant secondary compounds may have a great potential in regulation of C and N transformations in forest soils, but the real magnitude of their significance in soil processes is impossible to estimate.

Atomic Layer Deposition of Electroluminescent ZnS, SrS, and BaS Thin Films

The light emitted by flat panel displays (FPD) can be generated in many different ways, such as for example alternating current thin film electroluminescence (ACTFEL), liquid crystal display (LCD), light emitting diode (LED), or plasma display panel (PDP) technologies. In this work, the focus was on ACTFEL devices and the goal was to develop new thin film processes for light emitting materials in ACTFEL devices. The films were deposited with the atomic layer deposition (ALD) method, which has been utilized in the manufacturing of ACTFEL displays since the mid-1980s. The ALD method is based on surface-controlled self-terminated reactions and a maximum of one layer of the desired material can be prepared during one deposition cycle. Therefore, the film thickness can be controlled simply by adjusting the number of deposition cycles. In addition, both large areas and deep trench structures can be covered uniformly. During this work, new ALD processes were developed for the following thin film materials: BaS, CuxS, MnS, PbS, SrS, SrSe, SrTe, SrS1-xSex, ZnS, and ZnS1-xSex. In addition, several ACTFEL devices were prepared where the light emitting material was BaS, SrS, SrS1-xSex, ZnS, or ZnS1-xSex thin film that was doped with Ce, Cu, Eu, Mn, or Pb. The sulfoselenide films were made by substituting the elemental selenium for sulfur on the substrate surface during film deposition. In this way, it was possible to replace a maximum of 90% of the sulfur with selenium, and the XRD analyses indicated that the films were solid solutions. The polycrystalline BaS, SrS, and ZnS thin films were deposited at 180-400, 120-460, and 280-500 °C, respectively, and the processes had a wide temperature range where the growth rate of the films was independent of the deposition temperature. The electroluminescence studies showed that the doped sulfoselenide films resulted in low emission intensity. However, the emission intensities and emission colors of the doped SrS, BaS, and ZnS films were comparable with those found in earlier studies. It was also shown that the electro-optical properties of the different ZnS:Mn devices were different as a consequence of different ZnS:Mn processes. Finally, it was concluded that because the higher deposition temperature seemed to result in a higher emission intensity, the thermal stability of the reactants has a significant role when the light emitting materials of ACTFEL devices are deposited with the ALD method.

Ecological processes and large-scale climate relationships in northern coniferous forests

Ilmasto vaikuttaa ekologisiin prosesseihin eri tasoilla. Suuren mittakaavan ilmastoprosessit, yhdessä ilmakehän ja valtamerien kanssa, säätelevät paikallisia sääilmiöitä suurilla alueilla (mantereista pallopuoliskoihin). Tämä väistöskirja pyrkii selittämään kuinka suuren mittakaavan ilmasto on vaikuttanut tiettyihin ekologisiin prosesseihin pohjoisella havumetsäalueella. Valitut prosessit olivat puiden vuosilustojen kasvu, metsäpalojen esiintyminen ja vuoristomäntykovakuoriaisen aiheuttamat puukuolemat. Suuren mittakaavan ilmaston löydettiin vaikuttaneen näiden prosessien esiintymistiheyteen, kestoon ja levinneisyyteen keskeisten sään muuttujien välityksellä hyvin laajoilla alueilla. Tutkituilla prosesseilla oli vahva yhteys laajan mittakaavan ilmastoon. Yhteys on kuitenkin ollut hyvin dynaaminen ja muuttunut 1900-luvulla ilmastonmuutoksen aiheuttaessa muutoksia suuren mittakaavan ja alueellisten ilmastoprosessien välisiin sisäisiin suhteisiin.

Integral Transformations of Volterra Gaussian Processes

We study integral representations of Gaussian processes with a pre-specified law in terms of other Gaussian processes. The dissertation consists of an introduction and of four research articles. In the introduction, we provide an overview about Volterra Gaussian processes in general, and fractional Brownian motion in particular. In the first article, we derive a finite interval integral transformation, which changes fractional Brownian motion with a given Hurst index into fractional Brownian motion with an other Hurst index. Based on this transformation, we construct a prelimit which formally converges to an analogous, infinite interval integral transformation. In the second article, we prove this convergence rigorously and show that the infinite interval transformation is a direct consequence of the finite interval transformation. In the third article, we consider general Volterra Gaussian processes. We derive measure-preserving transformations of these processes and their inherently related bridges. Also, as a related result, we obtain a Fourier-Laguerre series expansion for the first Wiener chaos of a Gaussian martingale. In the fourth article, we derive a class of ergodic transformations of self-similar Volterra Gaussian processes.

Modeling ecological and evolutionary processes in spatially structured populations

Many species inhabit fragmented landscapes, resulting either from anthropogenic or from natural processes. The ecological and evolutionary dynamics of spatially structured populations are affected by a complex interplay between endogenous and exogenous factors. The metapopulation approach, simplifying the landscape to a discrete set of patches of breeding habitat surrounded by unsuitable matrix, has become a widely applied paradigm for the study of species inhabiting highly fragmented landscapes. In this thesis, I focus on the construction of biologically realistic models and their parameterization with empirical data, with the general objective of understanding how the interactions between individuals and their spatially structured environment affect ecological and evolutionary processes in fragmented landscapes. I study two hierarchically structured model systems, which are the Glanville fritillary butterfly in the Åland Islands, and a system of two interacting aphid species in the Tvärminne archipelago, both being located in South-Western Finland. The interesting and challenging feature of both study systems is that the population dynamics occur over multiple spatial scales that are linked by various processes. My main emphasis is in the development of mathematical and statistical methodologies. For the Glanville fritillary case study, I first build a Bayesian framework for the estimation of death rates and capture probabilities from mark-recapture data, with the novelty of accounting for variation among individuals in capture probabilities and survival. I then characterize the dispersal phase of the butterflies by deriving a mathematical approximation of a diffusion-based movement model applied to a network of patches. I use the movement model as a building block to construct an individual-based evolutionary model for the Glanville fritillary butterfly metapopulation. I parameterize the evolutionary model using a pattern-oriented approach, and use it to study how the landscape structure affects the evolution of dispersal. For the aphid case study, I develop a Bayesian model of hierarchical multi-scale metapopulation dynamics, where the observed extinction and colonization rates are decomposed into intrinsic rates operating specifically at each spatial scale. In summary, I show how analytical approaches, hierarchical Bayesian methods and individual-based simulations can be used individually or in combination to tackle complex problems from many different viewpoints. In particular, hierarchical Bayesian methods provide a useful tool for decomposing ecological complexity into more tractable components.

Below-ground processes in meadow soil under elevated ozone and carbon dioxide : - Greenhouse gas fluxes, N cycling and microbial communities

This thesis focuses on how elevated CO2 and/or O3 affect the below-ground processes in semi-natural vegetation, with an emphasis on greenhouse gases, N cycling and microbial communities. Meadow mesocosms mimicking lowland hay meadows in Jokioinen, SW Finland, were enclosed in open-top chambers and exposed to ambient and elevated levels of O3 (40-50 ppb) and/or CO2 (+100 ppm) for three consecutive growing season, while chamberless plots were used as chamber controls. Chemical and microbiological analyses as well as laboratory incubations of the mesocosm soils under different treatments were used to study the effects of O3 and/or CO2. Artificially constructed mesocosms were also compared with natural meadows with regards to GHG fluxes and soil characteristics. In addition to research conducted at the ecosystem level (i.e. the mesocosm study), soil microbial communities were also examined in a pot experiment with monocultures of individual species. By comparing mesocosms with similar natural plant assemblage, it was possible to demonstrate that artificial mesocosms simulated natural habitats, even though some differences were found in the CH4 oxidation rate, soil mineral N, and total C and N concentrations in the soil. After three growing seasons of fumigations, the fluxes of N2O, CH4, and CO2 were decreased in the NF+O3 treatment, and the soil NH4+-N and mineral N concentrations were lower in the NF+O3 treatment than in the NF control treatment. The mesocosm soil microbial communities were affected negatively by the NF+O3 treatment, as the total, bacterial, actinobacterial, and fungal PLFA biomasses as well as the fungal:bacterial biomass ratio decreased under elevated O3. In the pot survey, O3 decreased the total, bacterial, actinobacterial, and mycorrhizal PLFA biomasses in the bulk soil and affected the microbial community structure in the rhizosphere of L. pratensis, whereas the bulk soil and rhizosphere of the other monoculture, A. capillaris, remained unaffected by O3. Elevated CO2 caused only minor and insignificant changes in the GHG fluxes, N cycling, and the microbial community structure. In the present study, the below-ground processes were modified after three years of moderate O3 enhancement. A tentative conclusion is that a decrease in N availability may have feedback effects on plant growth and competition and affect the N cycling of the whole meadow ecosystem. Ecosystem level changes occur slowly, and multiplication of the responses might be expected in the long run.

Behavioural, population, and genetic processes affecting metapopulation dynamics of the Glanville fritillary butterfly

In my thesis I have been studying the effects of population fragmentation and extinction-recolonization dynamics on genetic and evolutionary processes in the Glanville fritillary butterfly (Melitaea cinxia). By conducting crosses within and among newly-colonized populations and using several fitness measures, I found a strong decrease in fitness following colonization by a few related individuals, and a strong negative relationship between parental relatedness and offspring fitness. Thereafter, I was interested in determining the number and relatedness of individuals colonizing new populations, which I did using a set of microsatellites I had previously developed for this species. Additionally, I am interested in the evolution of key life-history traits. By following the lifetime reproductive success of males emerging at different times in a semi-natural setup, I demonstrated that protandry is adaptive in males, and I was able to rule out, for M. cinxia, alternative incidental hypotheses evoked to explain the evolution of protandry in insects. Finally, in work I did together with Prof. Hanna Kokko, I am proposing bet-hedging as a new mechanism that could explain the evolution of polyandry in M. cinxia.