Circulating Glucocorticoid Bioactivity and Serum Glucocorticoid-Responsive Biomarkers during Steroid Therapy in Children and Adolescents with Inflammatory Bowel Disease

Objective: Glucocorticoid therapy is used worldwide to treat various inflammatory and immune conditions, including inflammatory bowel disease (IBD). In IBD, 80% of the patients obtain a positive response to the therapy; however the development of glucocorticoid-related side-effects is common. Our aim was therefore to study the possibility of optimizing glucocorticoid therapy in children and adolescents with IBD by measuring circulating glucocorticoid bioactivity (GBA) and serum glucocorticoid-responsive biomarkers in patients receiving steroid treatment for active disease. Methods: A total of sixty-nine paediatric IBD patients from the Paediatric Outpatient Clinics of the University Hospitals of Helsinki and Tampere participated in the studies. Control patients included 101 non-IBD patients and 41 disease controls in remission. In patients with active disease, blood samples were withdrawn before the glucocorticoid therapy was started, at 2-4 weeks after the initiation of the steroid and at 1-month intervals thereafter. Clinical response to glucocorticoid treatment and the development of steroid adverse events was carefully registered. GBA was analyzed with a COS-1 cell bioassay. The measured glucocorticoid therapy-responsive biomarkers included adipocyte-derived adiponectin and leptin, bone turnover-related collagen markers amino-terminal type I procollagen propeptide (PINP) and carboxyterminal telopeptide of type I collagen (ICTP) as well as insulin-like growth factor 1 (IGF-1) and sex hormone-binding globulin (SHBG), and inflammatory marker high-sensitivity C-reactive protein (hs-CRP). Results: The most promising marker for glucocorticoid sensitivity was serum adiponectin that associated with steroid therapy–related adverse events. Serum leptin indicated a similar trend. In contrast, circulating GBA rose in all subjects receiving glucocorticoid treatment but did not associate with the clinical response to steroids or with glucocorticoid therapy-related side-effects. Of notice, young patients (<10 years) showed similar GBA levels than older patients, despite receiving higher weight-adjusted doses of glucocorticoid. Markers of bone formation were lower in children with active IBD than in the control patients, probably reflecting the suppressive effect of the active inflammation. The onset of the glucocorticoid therapy further suppressed bone turnover. Inflammatory marker hs-CRP decreased readily after the initiation of the steroid, however the decrease did not associate with the clinical response to glucocorticoids. Conclusions: This is the first study to show that adipocyte-derived adiponectin associates with steroid therapy-induced side-effects. Further studies are needed, but it is possible that the adiponectin measurement could aid the recognition of glucocorticoid-sensitive patients in the future. GBA and the other markers reflecting glucocorticoid activity in different tissues changed during the treatment, however their change did not correlate with the therapeutic response to steroids or with the development of glucocorticoid-related side effects and therefore cannot guide the therapy in these patients. Studies such as as the present one that combine clinical data with newly developed biomolecular technology are needed to step-by-step build a general picture of the glucocorticoid actions in different tissues.

Si, CdTe and CdZnTe radiation detectors for imaging applications

The structure and operation of CdTe, CdZnTe and Si pixel detectors based on crystalline semiconductors, bump bonding and CMOS technology and developed mainly at Oy Simage Ltd. And Oy Ajat Ltd., Finland for X- and gamma ray imaging are presented. This detector technology evolved from the development of Si strip detectors at the Finnish Research Institute for High Energy Physics (SEFT) which later merged with other physics research units to form the Helsinki Institute of Physics (HIP). General issues of X-ray imaging such as the benefits of the method of direct conversion of X-rays to signal charge in comparison to the indirect method and the pros and cons of photon counting vs. charge integration are discussed. A novel design of Si and CdTe pixel detectors and the analysis of their imaging performance in terms of SNR, MTF, DQE and dynamic range are presented in detail. The analysis shows that directly converting crystalline semiconductor pixel detectors operated in the charge integration mode can be used in X-ray imaging very close to the theoretical performance limits in terms of efficiency and resolution. Examples of the application of the developed imaging technology to dental intra oral and panoramic and to real time X-ray imaging are given. A CdTe photon counting gamma imager is introduced. A physical model to calculate the photo peak efficiency of photon counting CdTe pixel detectors is developed and described in detail. Simulation results indicates that the charge sharing phenomenon due to diffusion of signal charge carriers limits the pixel size of photon counting detectors to about 250 μm. Radiation hardness issues related to gamma and X-ray imaging detectors are discussed.

Search for a Light Higgs Boson in Central Exclusive Diffraction: Method and Detectors

By detecting leading protons produced in the Central Exclusive Diffractive process, p+p → p+X+p, one can measure the missing mass, and scan for possible new particle states such as the Higgs boson. This process augments - in a model independent way - the standard methods for new particle searches at the Large Hadron Collider (LHC) and will allow detailed analyses of the produced central system, such as the spin-parity properties of the Higgs boson. The exclusive central diffractive process makes possible precision studies of gluons at the LHC and complements the physics scenarios foreseen at the next e+e− linear collider. This thesis first presents the conclusions of the first systematic analysis of the expected precision measurement of the leading proton momentum and the accuracy of the reconstructed missing mass. In this initial analysis, the scattered protons are tracked along the LHC beam line and the uncertainties expected in beam transport and detection of the scattered leading protons are accounted for. The main focus of the thesis is in developing the necessary radiation hard precision detector technology for coping with the extremely demanding experimental environment of the LHC. This will be achieved by using a 3D silicon detector design, which in addition to the radiation hardness of up to 5×10^15 neutrons/cm2, offers properties such as a high signal-to- noise ratio, fast signal response to radiation and sensitivity close to the very edge of the detector. This work reports on the development of a novel semi-3D detector design that simplifies the 3D fabrication process, but conserves the necessary properties of the 3D detector design required in the LHC and in other imaging applications.

Geant4 Hadronic Cascade Models and CMS Data Analysis : Computational Challenges in the LHC era

This work belongs to the field of computational high-energy physics (HEP). The key methods used in this thesis work to meet the challenges raised by the Large Hadron Collider (LHC) era experiments are object-orientation with software engineering, Monte Carlo simulation, the computer technology of clusters, and artificial neural networks. The first aspect discussed is the development of hadronic cascade models, used for the accurate simulation of medium-energy hadron-nucleus reactions, up to 10 GeV. These models are typically needed in hadronic calorimeter studies and in the estimation of radiation backgrounds. Various applications outside HEP include the medical field (such as hadron treatment simulations), space science (satellite shielding), and nuclear physics (spallation studies). Validation results are presented for several significant improvements released in Geant4 simulation tool, and the significance of the new models for computing in the Large Hadron Collider era is estimated. In particular, we estimate the ability of the Bertini cascade to simulate Compact Muon Solenoid (CMS) hadron calorimeter HCAL. LHC test beam activity has a tightly coupled cycle of simulation-to-data analysis. Typically, a Geant4 computer experiment is used to understand test beam measurements. Thus an another aspect of this thesis is a description of studies related to developing new CMS H2 test beam data analysis tools and performing data analysis on the basis of CMS Monte Carlo events. These events have been simulated in detail using Geant4 physics models, full CMS detector description, and event reconstruction. Using the ROOT data analysis framework we have developed an offline ANN-based approach to tag b-jets associated with heavy neutral Higgs particles, and we show that this kind of NN methodology can be successfully used to separate the Higgs signal from the background in the CMS experiment.

Studies of solar and stellar flares using multi-instrument data

Solar flares were first observed by plain eye in white light by William Carrington in England in 1859. Since then these eruptions in the solar corona have intrigued scientists. It is known that flares influence the space weather experienced by the planets in a multitude of ways, for example by causing aurora borealis. Understanding flares is at the epicentre of human survival in space, as astronauts cannot survive the highly energetic particles associated with large flares in high doses without contracting serious radiation disease symptoms, unless they shield themselves effectively during space missions. Flares may be at the epicentre of man s survival in the past as well: it has been suggested that giant flares might have played a role in exterminating many of the large species on Earth, including dinosaurs. Having said that prebiotic synthesis studies have shown lightning to be a decisive requirement for amino acid synthesis on the primordial Earth. Increased lightning activity could be attributed to space weather, and flares. This thesis studies flares in two ways: in the spectral and the spatial domain. We have extracted solar spectra using three different instruments, namely GOES (Geostationary Operational Environmental Satellite), RHESSI (Reuven Ramaty High Energy Solar Spectroscopic Imager) and XSM (X-ray Solar Monitor) for the same flares. The GOES spectra are low resolution obtained with a gas proportional counter, the RHESSI spectra are higher resolution obtained with Germanium detectors and the XSM spectra are very high resolution observed with a silicon detector. It turns out that the detector technology and response influence the spectra we see substantially, and are important to understanding what conclusions to draw from the data. With imaging data, there was not such a luxury of choice available. We used RHESSI imaging data to observe the spatial size of solar flares. In the present work the focus was primarily on current solar flares. However, we did make use of our improved understanding of solar flares to observe young suns in NGC 2547. The same techniques used with solar monitors were applied with XMM-Newton, a stellar X-ray monitor, and coupled with ground based Halpha observations these techniques yielded estimates for flare parameters in young suns. The material in this thesis is therefore structured from technology to application, covering the full processing path from raw data and detector responses to concrete physical parameter results, such as the first measurement of the length of plasma flare loops in young suns.

Metrology of gaseous air pollutants

The need for mutual recognition of accurate measurement results made by competent laboratories has been very widely accepted at the international level e.g., at the World Trade Organization. A partial solution to the problem was made by the International Committee for Weights and Measures (CIPM) in setting up the Mutual Recognition Arrangement (CIPM MRA), which was signed by National Metrology Institutes (NMI) around the world. The core idea of the CIPM MRA is to have global arrangements for the mutual acceptance of the calibration certificates of National Metrology Institutes. The CIPM MRA covers all the fields of science and technology for which NMIs have their national standards. The infrastructure for the metrology of the gaseous compounds carbon monoxide (CO), nitrogen monoxide (NO), nitrogen dioxide (NO2), sulphur dioxide (SO2) and ozone (O3) has been constructed at the national level at the Finnish Meteorological Institute (FMI). The calibration laboratory at the FMI was constructed for providing calibration services for air quality measurements and to fulfil the requirements of a metrology laboratory. The laboratory successfully participated, with good results, in the first comparison project, which was aimed at defining the state of the art in the preparation and analysis of the gas standards used by European metrology institutes and calibration laboratories in the field of air quality. To confirm the competence of the laboratory, the international external surveillance study was conducted at the laboratory. Based on the evidence, the Centre for Metrology and Accreditation (MIKES) designated the calibration laboratory at the Finnish Meteorological Institute (FMI) as a National Standard Laboratory in the field of air quality. With this designation, the MIKES-FMI Standards Laboratory became a member of CIPM MRA, and Finland was brought into the internationally-accepted forum in the field of gas metrology. The concept of ‘once measured - everywhere accepted’ is the leading theme of the CIPM MRA. The calibration service of the MIKES-FMI Standards Laboratory realizes the SI traceability system for the gas components, and is constructed to enable it to meet the requirements of the European air quality directives. In addition, all the relevant uncertainty sources that influence the measurement results have been evaluated, and the uncertainty budgets for the measurement results have been created.

Monimuotoisuus ja esteettömyys : Näkövammaisten asiantuntijoiden työelämäkokemuksia

The purpose of this study is to analyse education, employment, and work-life experiences of visually impaired persons in expert jobs. The empirical data consists of 30 thematic interviews (24 visually impaired persons, 1 family-member of a visually impaired person, 5 persons working with diversity issues), of supplementary articles, and of statistics on the socio-economic status of the visually impaired. The interviewees experiences of education and employment have been analysed by a qualitative method. The analysis has been deepened by reflecting it against the recent discussion on the concept of diversity. The author s methodological choice as a disability researcher has been to treat the interviewees as co-researchers rather than objects of research. Accessibility in its different forms is a prerequisite of diversity in the workplace, and this study examines what kind of accessibility is required by visually impaired professionals. Access to working life depends on the attitudes prejudices and expectations that society has towards a minority group. Social accessibility is connected with internal relationships in the workplace, and achieving social accessibility is a bilateral process. Information technology has revolutionised the visually impaired people s possibilities of accessing information and performing expert tasks. Accessible environment, good mobility skills, and transportation services enable visually impaired employees to get to their workplaces and to navigate there with ease. Integration has raised the level of education and widened the selection of career options for the visually impaired. However, even visually impaired people with academic degrees often need employment support services. Visually impaired professionals are mainly employed in the public and third sector. Achieving diversity in the labour market is a multiactor process. Social support services are needed, as well as courage and readiness from employers to hire people with disabilities. The organisations of the visually impaired play an important role in affecting the attitudes and providing peer support. Visually impaired employees need good professional skills, blindness skills, and social courage, and they need to be comfortable with their disability. In the workplace, diversity may actualise as diverse ways of working: the work is done by using technical aids or other means of compensating for the lack of eyesight. When an employee must find compensatory solutions for disability-related limitations at work, this will also develop his/her problem-solving abilities. Key words: visually impaired, diversity, accessibility, working life

Ruumis ja rauta : esseitä esineiden sosiaalisuudesta

"Body and Iron: Essays on the Socialness of Objects" focuses on the bodily-material interaction of human subjects and technical objects. It poses a question, how is it possible that objects have an impact on their human users and examines the preconditions of active efficacy of objects. In this theoretical task the work relies on various discussions drawing from realistic ontology, phenomenology of body, neurophysiology of Antonio Damasio and psychoanalysis to establish both objects and bodies as material entities related in a causal interaction with each other. Out of material interaction emerge a symbolic field, psyche and culture that produce representations of interactions with material world they remain dependent on and conditioned by. Interaction with objects informs the human body via its somatosensory systems: interoseptive and proprioseptive (or kinesthetic) systems provide information to central nervous system of the internal state of the body and muscle tensions and motor activity of the limbs. Capability to control the movements of one's body by the internal "feel" of being a body turns out to be a precondition to the ability to control artificial extensions of the body. Motor activity of the body is involved in every perception of environment as the feel of one's own body is constitutive of any perception of external objects. Perception of an object cause changes in the internal milieu of the body and these changes in the organism form a bodily representation of an external object. Via these "muscle images" the subject can develop a feel for an instrument. Bodily feel for an object is pre-conceptual, practical knowledge that resists articulation but allows sensing the world through the object. This is what I would call sensual knowledge. Technical objects intervene between body and environment, transforming the relation of perception and motor activity. Once connected to a vehicle, human subject has to calibrate visual information of his or her position and movement in space to the bodily actions controlling the machine. It is the machine that mediates the relation of human actions to the relation of her body to its environment. Learning to use the machine necessarily means adjusting his or her bodily actions to the responses of the machine in relation to environmental changes it causes. Responsiveness of the machine to human touch "teaches" its subject by providing feedback of the "correctitude" of his or her bodily actions. Correct actions form a body technique of handling the object. This is the way of socialness of objects. While responding to human actions they generate their subjects. Learning to handle a machine means accepting the position of the user in the program of action materialized in the construction of the object. Objects mediate, channel and transform the relation of the body to its environment and via environment to the body itself according to their material and technical construction. Objects are sensory media: they channel signals and information from the environment thus constituting a representation of environment, a virtual or artificial reality. They also feed the body directly with their powers equipping their user with means of regulating somatic and psychic states of her self. For these reasons humans look for the company of objects. Keywords: material objects, material culture, sociology of technology, sociology of body, mobility, driving

The Finnish Competition State and Entrepreneurial Policies in the Helsinki Region

The thesis examines the intensification and characteristics of a policy that emphasises economic competitiveness in Finland during the 1990s and early 2000s. This accentuation of economic objectives is studied at the level of national policy-making as well as at the regional level through the policies and strategies of cities and three universities in the Helsinki region. By combining the analysis of state policies, urban strategies and university activities, the study illustrates the pervasiveness of the objective of economic competitiveness and growth across these levels and sheds light on the features and contradictions of these policies on a broad scale. The thesis is composed of five research articles and a summary article. At the level of national policies, the central focus of the thesis is on the growing role of science and technology policy as a state means to promote structural economic change and its transformation towards a broader, yet ambivalent concept of innovation policy. This shift brings forward a tension between an increasing emphasis on economic aspects – innovations and competitiveness – as well as the expanding scope of issues across a wide range of policy sectors that are being subsumed under this market- and economy oriented framework. Related to science and technology policy, attention is paid to adjustments in university policy in which there has been increasing pressure for efficiency, rationalisation and commercialisation of academic activities. Furthermore, political efforts to build an information society through the application of information and communication technologies are analysed with particular attention to the balance between economic and social objectives. Finally, changes in state regional policy priorities and the tendency towards competitiveness are addressed. At the regional level, the focus of the thesis is on the policies of the cities in Finland’s capital region as well as strategies of three universities operating in the region, namely the University of Helsinki, Helsinki University of technology and Helsinki School of Economics. As regards the urban level, the main focus is on the changes and characteristics of the urban economic development policy of the City of Helsinki. With respect to the universities, the thesis examines their attempts to commercialise research and thus bring academic research closer to economic interests, and pays particular attention to the contradictions of commercialisation. Related to the universities, the activities of three intermediary organisations that the universities have established in order to increase cooperation with industry are analysed. These organisations are the Helsinki Science Park, Otaniemi International Innovation Centre and LTT Research Ltd. The summary article provides a synthesis of the material presented in the five original articles and relates the results of the articles to a broader discussion concerning the emergence of competition states and entrepreneurial cities and regions. The main points of reference are Bob Jessop’s and Neil Brenner’s theses on state and urban-regional restructuring. The empirical results and considerations from Finland and the Helsinki region are used to comment on, specify and criticise specific parts of the two theses.

Opettajien teknologiasuhteen luonne ja muodostuminen

This study investigates primary and secondary school teachers’ social representations and ways to conceptualise new technologies. The focus is both on teachers’ descriptions, interpretations and conceptions of technology and on the adoption and formation of these conceptions. In addition, the purpose of this study is to analyse how the national objectives of the information society and the implementation of information and communication technologies (ICT) in schools reflect teachers’ thinking and everyday practices. The starting point for the study is the idea of a dynamic and mutual relationship between teachers and technology so that technology does not affect one-sidedly teachers’ thinking. This relationship is described in this study as the teachers’ technology relationship. This concept emphasises that technology cannot be separated from society, social relations and the context where it is used but it is intertwined with societal practices and is therefore formed in interaction with the material and social factors. The theoretical part of this study encompasses three different research traditions: 1) the social shaping of technology, 2) research on how schools and teachers use technology and 3) social representations theory. The study was part of the Helmi Project (Holistic development of e-Learning and business models) in 2001–2005 at the Helsinki University of Technology, SimLab research unit. The Helmi Project focused on different aspects of the utilisation of ICT in teaching. The research data consisted of interviews of teachers and principals. Altogether 37 interviews were conducted in 2003 and 2004 in six different primary and secondary schools in Espoo, Finland. The data was analysed applying grounded theory. The results showed that the teachers’ technology relationship was diverse and context specific. Technology was interpreted differently depending on the context: the teachers’ technology related descriptions and metaphors illustrated on one hand the benefits and the possibilities and on the other hand the problems and threats of different technologies. The dualist nature of technology was also expressed in the teachers’ thinking about technology as a deterministic and irrevocable force and as a controllable and functional tool at the same time. Teachers did not consider technology as having a stable character but they interpreted technology in relation to the variable context of use. This way they positioned or anchored technology into their everyday practices. The study also analysed the formation of the teachers’ technology relationship and the ways teachers familiarise themselves with new technologies. Comparison of different technologies as well as technology related metaphors turned out to be significant in forming the technology relationship. Also the ways teachers described the familiarisation process and the interpretations of their own technical skills affected the formation of technology relationship. In addition, teachers defined technology together with other teachers, and the discussions reflected teachers’ interpretations and descriptions.

Social Responsibility in Developing New Biotechnology : Interpretations of Responsibility in the Governance of Finnish Biotechnology

The object of the dissertation is to analyse the concept of social responsibility in relation to research and development of new biotechnology. This is done by examining the relevant actors – researchers, administrators, decision-makers, experts, industry, and the public – involved in the Finnish governance of biotechnology through their roles and responsibilities. Existing practises of responsibility in biotechnology governance, as well as the discourses of responsibility – the actors’ conceptions of their own and others responsibilities – are analysed. Three types of responsibility that the actors have assumed are formulated, and the implications of these conceptions to the governance of new biotechnology are analysed. From these different types of responsibility adopted and used by the actors, theoretical models called responsibility chains are constructed. The notion of responsibility is under-theorised in sociology and this research is an attempt to create a mid-range theory of responsibility in the context of biotechnology governance. The research aims to increase understanding of the governance system from a holistic viewpoint by contributing to academic debates on science and technology policy, public understanding of science, commercialisation of research, and corporate social responsibility. With a thorough analysis of the concept of responsibility that is derived from empirical data, the research brings new perspectives into these debates by challenging many normative ideas embedded in discourses. For example, multiple roles of the public are analysed to highlight the problems of consumerism and citizen participation in practise, as well as in relation to different policy strategies. The research examines also the contradictory responsibilities faced by biotechnology researchers, who balance between academic autonomy, commercialisation of research, and reflecting social consequences of their work. Industries responsibilities are also examined from the viewpoint of biotechnology. The research methodology addresses the contradictions between empirical findings, theories of biotechnology governance, and policies in a novel way, as the study concentrates on several actors and investigates both the discourses and the practises of the actors. Thus, the qualitative method of analysis is a combination of discourse and content analysis. The empirical material is comprised of 29 personal interviews as well as documents by Finnish and multinational organizations on biotechnology governance.

Calculating life : Nation, Nature, and the Nativisation of Nonhuman Genetics

In recent decades, nation-states have become major stakeholders in nonhuman genetic resource networks as a result of several international treaties. The most important of these is the juridically binding international Convention on Biological Diversity (CBD), signed at the Rio Earth Summit in 1992 by some 150 nations. This convention was a watershed for the identification of global rights related to genetic resources in recognising the sovereign power of signatory nations over their natural resources. The contracting parties are legally obliged to identify their native genetic material and to take legislative, administrative, and/or policy measures to foster research on genetic resources. In this process of global bioprospecting in the name of biodiversity conservation, the world's nonhuman genetic material is to be indexed according to nation and nationality. This globally legitimated process of native genetic identification inscribes national identity into nature and flesh. As a consequence, this new form of potential national biowealth forms also what could be called novel nonhuman genetic nationhoods. These national corporealities are produced in tactical and strategic encounters of the political and the scientific, in new spaces crafted through technical and institutional innovation, and between the national reconfiguration of the natural and cultural as framed by international political agreements. This work follows the creation of national genetic resources in one of the biodiversity-poor countries of the North, Finland. The thesis is an ethnographic work addressing the calculation of life: practices of identifying, evaluating, and collecting nonhuman life in national genetic programmes. The core of the thesis is about observations made within the Finnish Genetic Resources Programmes in 2004 2008, gathered via multi-sited ethnography and related methods derived from the anthropology of science. The thesis explores the problematic relations of the communal forms of human and nonhuman life in an increasingly technoscientific contemporaneity  the co-production and coexistence of human and nonhuman life in biopolitical formations called nations.

Biovalta, toiseus ja naisten toimijuus hedelmöityshoidoissa

Biopower, Otherness and Women's Agency in Assisted Reproduction. This sociological study analyses how, why and with what kind of consequences assisted reproductive technologies (ART) have become the primary technology for governing infertility in Finland both on the level of individuals and society. The phenomenon is construed as one the strategies of the Focaultian biopower since ART are political techniques of the beginning of life par excellence, as they are used to prepare the bodies of certain types of women to create certain kind of life, i.e. certain kind of children. Moreover, ART are interpreted to be gendered control techniques with which the pure, and at the same time prevailing, social order symbolised by a female body is maintained by naming and excluding otherness, unsuitable mother candidates and children. Finally, it is considered how the agency, subjectivity, of women experiencing infertility and seeking treatment appears in the prevailing context of ART. The introduction of IVF-based reproductive technologies to Finland and the treatment practices of the early 1990s have been studied on the basis of a clinic questionnaire, medical doctor interviews and articles of the Medical Journal Duodecim from 1969 to 2000. Opinions on the method of the treatment providers were studied by conducting a theme interview with fertilisation doctors in 1993. Experiences of women who have received treatment or experienced infertility were studied by means of a survey in 1994 and by analysing the content of messages in an online discussion forum in 2000. On the basis of the medical doctor interviews, significant criterion for choosing mother candidates turned out to be her vitality and her mental and physical health, which are considered prerequisites for a vitality of the child to be born. The hierarchies concerning children became evident. While people normally make their children on their own, this is what people experiencing infertility are trying to do as well. In the era of ART, the primary child is genetically the parents' own child, a secondary option for Finnish parents is a genetically Finnish child conceived by donated Finnish gametes or embryos and the last option is an adopted child of foreign origin. Women's agency mainly appears in their way of using ART as a technology of the self for self-control on one's own nature, which helps them to prepare their bodies in order to become pregnant in co-operation with a fertilisation doctor. Women's creative free agency exceeding governance appeared as a distinctive use of language with which they created shared meaning for their infertility experience, their own individual and group identity and distinctive reality. ART are very political techniques as they have a possibility to change the methods of having children and to shape life. Therefore, further sociological research on them is important and needed. Key words: practises of assisted reproduction, women's agency, biopower, vital politics of the beginning of life, otherness

Kansanterveysongelman synty : Tuberkuloosi ja terveyden hallinta Suomessa ennen toista maailmansotaa

The study focuses on the emergence of tuberculosis as a public health problem and the development of the various methods to counteract it in Finland before the introduction of efficient methods of treatment in the 1940s and 50s. It covers a time period from year 1882 when the tuberculosis bacterium was identified to the 1930s when the early formation of tuberculosis work became established in Finland. During this time there occurred important changes in medicine, public health thinking and methods of personal health care that have been referred to as the bacteriological revolution. The study places tuberculosis prevention in this context and shows how the tuberculosis problem affected the government of health on all these three dimensions. The study is based on foucauldian analytics of government, which is supplemented with perspectives from contemporary science and technology studies. In addition, it utilises a broad array of work in medical history. The central research materials consist of medical journals, official programs and documents on tuberculosis policy, and health education texts. The general conclusions of the study are twofold. Firstly, the ensemble of tuberculosis work was formed from historically diverse and often conflicting elements. The identification of the pathogen was only the first step in the establishment of tuberculosis as a major public health problem. Important were also the attention of the science of hygiene and statistical reasoning that dominated public health thinking in the late 19th century. Furthermore, the adoption of the bacteriological tuberculosis doctrine in medicine, public health work and health education was profoundly influenced by previous understanding of the nature of the illness, of medical work, of the prevention of contagious diseases, and of personal health care. Also the two central institutions of tuberculosis work, sanatorium and dispensary, have heterogeneous origins and multifarious functions. Secondly, bacteriology represented in this study by tuberculosis remodelled medical knowledge and practices, the targets and methods of public health policy, and the doctrine of personal health care. Tuberculosis provided a strong argument for specific causes (if not cures) as well as laboratory methods in medicine. Tuberculosis prevention contributed substantially to the development whereby a comprehensive responsibility for the health of the population and public health work was added to the agenda of the state. Health advice on tuberculosis and other contagious diseases used dangerous bacteria to motivate personal health care and redefined it as protecting oneself from the attacks of external pathogens and strengthening oneself against their effects. Thus, tuberculosis work is one important root for the contemporary public concern for the health of the population and the imperative of personal health care.

Elämän tiede : Tutkimus lääketieteellisestä teknologiasta, vanhemmuudesta ja perimän hallinnasta

Doctoral dissertation work in sociology examines how human heredity became a scientific, political and a personal issue in the 20th century Finland. The study focuses on the institutionalisation of rationales and technologies concerning heredity, in the context of Finnish medicine and health care. The analysis concentrates specifically on the introduction and development of prenatal screening within maternity care. The data comprises of medical articles, policy documents and committee reports, as well as popular guidebooks and health magazines. The study commences with an analysis on the early 20th century discussions on racial hygiene. It ends with an analysis on the choices given to pregnant mothers and families at present. Freedom to choose, considered by geneticists and many others as a guarantee of the ethicality of medical applications, is presented in this study as a historically, politically and scientifically constructed issue. New medical testing methods have generated new possibilities of governing life itself. However, they have also created new ethical problems. Leaning on recent historical data, the study illustrates how medical risk rationales on heredity have been asserted by the medical profession into Finnish health care. It also depicts medical professions ambivalence between maintaining the patients autonomy and utilizing for example prenatal testing according to health policy interests. Personalized risk is discussed as a result of the empirical analysis. It is indicated that increasing risk awareness amongst the public, as well as offering choices, have had unintended consequences. According to doctors, present day parents often want to control risks more than what is considered justified or acceptable. People s hopes to anticipate the health and normality of their future children have exceeded the limits offered by medicine. Individualization of the government of heredity is closely linked to a process that is termed as depolitization. The concept refers to disembedding of medical genetics from its social contexts. Prenatal screening is regarded to be based on individual choice facilitated by neutral medical knowledge. However, prenatal screening within maternity care also has its basis in health policy aims and economical calculations. Methodological basis of the study lies in Michel Foucault s writings on the history of thought, as well as in science and technology studies.