Molecular Characterization of Fibrotic Scarring in Kidneys with Congenital Nephrotic Syndrome of the Finnish type

Congenital nephrotic syndrome of the Finnish type (NPHS1, CNF) is an autosomal recessive disease, enriched in the Finnish population. NPHS1 is caused by a mutation in the NPHS1 gene. This gene encodes for nephrin, which is a major structural component of the slit diaphragm connecting podocyte foot processes in the glomerular capillary wall. In NPHS1, the genetic defect in nephrin leads to heavy proteinuria already in the newborn period. Finnish NPHS1 patients are nephrectomized at infancy, and after a short period of dialysis the patients receive a kidney transplant, which is the only curative therapy for the disease. In this thesis, we examined the cellular and molecular mechanisms leading to the progression of glomerulosclerosis and tubulointerstitial fibrosis in NPHS1 kidneys. Progressive mesangial expansion in NPHS1 kidneys is caused by mesangial cell hyperplasia and the accumulation of extracellular matrix proteins. Expansion of the extracellular matrix was caused by the normal mesangial cell component, collagen IV. However, no significant changes in mesangial cell phenotype or extracellular matrix component composition were observed. Endotheliosis was the main ultrastructural lesion observed in the endothelium of NPHS1 glomeruli. The abundant expression of vascular endothelial growth factor and its transcription factor hypoxia inducible factor-1 alpha were in accordance with the preserved structure of the endothelium in NPHS1 kidneys. Hypoperfusion of peritubular capillaries and tubulointerstitial hypoxia were evident in NPHS1 kidneys, indicating that these may play an important role in the rapid progression of fibrosis in the kidneys of NPHS1 patients. Upregulation of Angiotensin II was obvious, emphasizing its role in the pathophysiology of NPHS1. Excessive oxidative stress was evident in NPHS1 kidneys, manifested as an increase expression of p22phox, superoxide production, lipid oxide peroxidation and reduced antioxidant activity. In conclusion, our data indicate that mesangial cell proliferation and the accumulation of extracellular matrix accumulation are associated with the obliteration of glomerular capillaries, causing the reduction of circulation in peritubular capillaries. The injury and rarefaction of peritubular capillaries result in impairment of oxygen and nutrient delivery to the tubuli and interstitial cells, which correlates with the fibrosis, tubular atrophy and oxidative stress observed in NPHS1 kidneys.

Characterization of LRRTM and NGR gene families: Expression and functions

Some leucine-rich repeat (LRR) -containing membrane proteins are known regulators of neuronal growth and synapse formation. In this work I characterize two gene families encoding neuronal LRR membrane proteins, namely the LRRTM (leucine-rich repeat, transmembrane neuronal) and NGR (Nogo-66 receptor) families. I studied LRRTM and NGR family member's mRNA tissue distribution by RT-PCR and by in situ hybridization. Subcellular localization of LRRTM1 protein was studied in neurons and in non-neuronal cells. I discovered that LRRTM and NGR family mRNAs are predominantly expressed in the nervous system, and that each gene possesses a specific expression pattern. I also established that LRRTM and NGR family mRNAs are expressed by neurons, and not by glial cells. Within neurons, LRRTM1 protein is not transported to the plasma membrane; rather it localizes to endoplasmic reticulum. Nogo-A (RTN4), MAG, and OMgp are myelin-associated proteins that bind to NgR1 to limit axonal regeneration after central nervous system injury. To better understand the functions of NgR2 and NgR3, and to explore the possible redundancy in the signaling of myelin inhibitors of neurite growth, I mapped the interactions between NgR family and the known and candidate NgR1 ligands. I identified high-affinity interactions between RTN2-66, RTN3-66 and NgR1. I also demonstrate that Rtn3 mRNA is expressed in the same glial cell population of mouse spinal cord white matter as Nogo-A mRNA, and thus it could have a role in myelin inhibition of axonal growth. To understand how NgR1 interacts with multiple structurally divergent ligands, I aimed first to map in more detail the nature of Nogo-A:NgR1 interactions, and then to systematically map the binding sites of multiple myelin ligands in NgR1 by using a library of NgR1 expression constructs encoding proteins with one or multiple surface residues mutated to alanine. My analysis of the Nogo-A:NgR1 -interactions revealed a novel interaction site between the proteins, suggesting a trivalent Nogo-A:NgR1-interaction. Our analysis also defined a central binding region on the concave side of NgR1's LRR domain that is required for the binding of all known ligands, and a surrounding region critical for binding MAG and OMgp. To better understand the biological role of LRRTMs, I generated Lrrtm1 and Lrrtm3 knock out mice. I show here that reporter genes expressed from the targeted loci can be used for maping the neuronal connections of Lrrtm1 and Lrrtm3 expressing neurons in finer detail. With regard to LRRTM1's role in humans, we found a strong association between a 70 kb-spanning haplotype in the proposed promoter region of LRRTM1 gene and two possibly related phenotypes: left-handedness and schizophrenia. Interestingly, the responsible haplotype was linked to phenotypic variability only when paternally inherited. In summary, I identified two families of neuronal receptor-like proteins, and mapped their expression and certain protein-protein interactions. The identification of a central binding region in NgR1 shared by multiple ligands may facilitate the design and development of small molecule therapeutics blocking binding of all NgR1 ligands. Additionally, the genetic association data suggests that allelic variation upstream of LRRTM1 may play a role in the development of left-right brain asymmetry in humans. Lrrtm1 and Lrrtm3 knock out mice developed as a part of this study will likely be useful for schizophrenia and Alzheimer s disease research.

Molecular characterization of mitochondrial ataxias : with emphasis on MIRAS and IOSCA

Uusi hermoston rappeumasairaus MIRAS: Suomessa kantajia joka 125. väestöstä Tässä väitöskirjatyössä on kuvattu uusi peittyvästi periytyvä hermoston rappeumasairaus, MIRAS (mitochondrial recessive ataxia syndrome), ja sen geenitausta. Tauti osoittautui tutkimuksessamme Suomen yleisimmäksi perinnölliseksi ataksiasairaudeksi. Tutkimuksessa on tutkittu perinnöllisiä aivosairauksia, joissa yhtenä oireena on ataksia (kävelyn epävarmuus, tasapainovaikeus ja liikkeiden haparointi), sekä lukuisia muita aivojen toimintahäiriöstä johtuvia oireita. Seuloessamme suomalaisilta ataksiapotilailta MIRAS-geenivirhettä, 27 potilasta sai diagnoosin aikaisemmin tuntemattomalle, etenevälle ataksiasairaudelleen. Tutkimuksen tuloksena kyseisen geenivirheen DNA-diagnostiikka on otettu käyttöön suomalaisissa ja eurooppalaisissa laboratorioissa, ja toista sataa potilasta ympäri maailman on saanut diagnoosin. Suomen väestössä joka 125. kantaa MIRAS geenivirhettä, mutta taudin saa vain, jos perii geenivirheen molemmilta vanhemmiltaan. MIRAS on taudinkuvaltaan vaihteleva, mutta vaikea etenevä neurologinen sairaus. Useilla potilailla esiintyvät oireet ovat ataksia, puheen puuromaisuus (dysartria), ääreishermorappeuma (neuropatia), pakkoliikkeet, psykiatriset oireet sekä vaikea epilepsia. Erityisen tärkeää MIRAS-taudin tunnistaminen on siihen liittyvän epilepsian hoitopäätöksessä: valproaatti-lääkitys voi aiheuttaa MIRAS-potilaille vaikean maksavaurion. Väitöskirjatyön tuloksena selvisi, että kaikki suomalaiset, norjalaiset, belgialaiset, englantilaiset, australialaiset ja uusi-seelantilaiset MIRAS potilaat olivat kaukaista sukua samalle, tuhansia vuosia sitten eläneelle eurooppalaiselle esivanhemmalle. Ataksiasairauksien tautimekanismeja selvitimme tutkimalla MIRAS-ataksiaa ja sitä muistuttavaa IOSCA sairautta (infantile onset spinocerebellar ataxia), jonka aiheuttaa peittyvästi periytyvä geenivirhe Twinkle-geenissä. Tutkimuksessa löydettiin myös uusi, Twinkle-geenin geenivirheestä johtuva taudinkuva: vaikea-asteinen, varhaisella iällä alkava aivosairaus, jossa on lisäksi viitteitä maksasairaudesta. Löysimme potilaiden aivoista muutoksia mitokondrioiden eli solun voimalaitosten perimän määrässä. Nämä tulokset antavat arvokasta lisätietoa ataksiasairauksien taustalla olevista muutoksista, joiden ymmärtäminen on välttämätön edellytys hoitomahdollisuuksien tutkimiselle tulevaisuudessa.

Characterization of non-imaging semiconductor X-ray solar monitors

The first observations of solar X-rays date back to late 1940 s. In order to observe solar X-rays the instruments have to be lifted above the Earth s atmosphere, since all high energy radiation from the space is almost totally attenuated by it. This is a good thing for all living creatures, but bad for X-ray astronomers. Detectors observing X-ray emission from space must be placed on-board satellites, which makes this particular discipline of astronomy technologically and operationally demanding, as well as very expensive. In this thesis, I have focused on detectors dedicated to observing solar X-rays in the energy range 1-20 keV. The purpose of these detectors was to measure solar X-rays simultaneously with another X-ray spectrometer measuring fluorescence X-ray emission from the Moon surface. The X-ray fluorescence emission is induced by the primary solar X-rays. If the elemental abundances on the Moon were to be determined with fluorescence analysis methods, the shape and intensity of the simultaneous solar X-ray spectrum must be known. The aim of this thesis is to describe the characterization and operation of our X-ray instruments on-board two Moon missions, SMART-1 and Chandrayaan-1. Also the independent solar science performance of these two almost similar X-ray spectrometers is described. These detectors have the following two features in common. Firstly, the primary detection element is made of a single crystal silicon diode. Secondly, the field of view is circular and very large. The data obtained from these detectors are spectra with a 16 second time resolution. Before launching an instrument into space, its performance must be characterized by ground calibrations. The basic operation of these detectors and their ground calibrations are described in detail. Two C-flares are analyzed as examples for introducing the spectral fitting process. The first flare analysis shows the fit of a single spectrum of the C1-flare obtained during the peak phase. The other analysis example shows how to derive the time evolution of fluxes, emission measures (EM) and temperatures through the whole single C4 flare with the time resolution of 16 s. The preparatory data analysis procedures are also introduced in detail. These are required in spectral fittings of the data. A new solar monitor design equipped with a concentrator optics and a moderate size of field of view is also introduced.

Characterization of hydrophobin proteins at interfaces and in solutions using x rays

Hydrophobins are a group of particularly surface active proteins. The surface activity is demonstrated in the ready adsorption of hydrophobins to hydrophobic/hydrophilic interfaces such as the air/water interface. Adsorbed hydrophobins self-assemble into ordered films, lower the surface tension of water, and stabilize air bubbles and foams. Hydrophobin proteins originate from filamentous fungi. In the fungi the adsorbed hydrophobin films enable the growth of fungal aerial structures, form protective coatings and mediate the attachment of fungi to solid surfaces. This thesis focuses on hydrophobins HFBI, HFBII, and HFBIII from a rot fungus Trichoderma reesei. The self-assembled hydrophobin films were studied both at the air/water interface and on a solid substrate. In particular, using grazing-incidence x-ray diffraction and reflectivity, it was possible to characterize the hydrophobin films directly at the air/water interface. The in situ experiments yielded information on the arrangement of the protein molecules in the films. All the T. reesei hydrophobins were shown to self-assemble into highly crystalline, hexagonally ordered rafts. The thicknesses of these two-dimensional protein crystals were below 30 Å. Similar films were also obtained on silicon substrates. The adsorption of the proteins is likely to be driven by the hydrophobic effect, but the self-assembly into ordered films involves also specific protein-protein interactions. The protein-protein interactions lead to differences in the arrangement of the molecules in the HFBI, HFBII, and HFBIII protein films, as seen in the grazing-incidence x-ray diffraction data. The protein-protein interactions were further probed in solution using small-angle x-ray scattering. Both HFBI and HFBII were shown to form mainly tetramers in aqueous solution. By modifying the solution conditions and thereby the interactions, it was shown that the association was due to the hydrophobic effect. The stable tetrameric assemblies could tolerate heating and changes in pH. The stability of the structure facilitates the persistence of these secreted proteins in the soil.

Radiation effects in supported nanoparticles

Nanotechnology applications are entering the market in increasing numbers, nanoparticles being among the main classes of materials used. Particles can be used, e.g., for catalysing chemical reactions, such as is done in car exhaust catalysts today. They can also modify the optical and electronic properties of materials or be used as building blocks for thin film coatings on a variety of surfaces. To develop materials for specific applications, an intricate control of the particle properties, structure, size and shape is required. All these depend on a multitude of factors from methods of synthesis and deposition to post-processing. This thesis addresses the control of nanoparticle structure by low-energy cluster beam deposition and post-synthesis ion irradiation. Cluster deposition in high vacuum offers a method for obtaining precisely controlled cluster-assembled materials with minimal contamination. Due to the clusters small size, however, the cluster-surface interaction may drastically change the cluster properties on deposition. In this thesis, the deposition process of metal and alloy clusters on metallic surfaces is modelled using molecular dynamics simulations, and the mechanisms influencing cluster structure are identified. Two mechanisms, mechanical melting upon deposition and thermally activated dislocation motion, are shown to determine whether a deposited cluster will align epitaxially with its support. The semiconductor industry has used ion irradiation as a tool to modify material properties for decades. Irradiation can be used for doping, patterning surfaces, and inducing chemical ordering in alloys, just to give a few examples. The irradiation response of nanoparticles has, however, remained an almost uncharted territory. Although irradiation effects in nanoparticles embedded inside solid matrices have been studied, almost no work has been done on supported particles. In this thesis, the response of supported nanoparticles is studied systematically for heavy and light ion irradiation. The processes leading to damage production are identified and models are developed for both types of irradiation. In recent experiments, helium irradiation has been shown to induce a phase transformation from multiply twinned to single-crystalline nanoparticles in bimetallic alloys, but the nature of the transition has remained unknown. The alloys for which the effect has been observed are CuAu and FePt. It is shown in this thesis that transient amorphization leads to the observed transition and that while CuAu and FePt do not amorphize upon irradiation in bulk or as thin films, they readily do so as nanoparticles. This is the first time such an effect is demonstrated with supported particles, not embedded in a matrix where mixing is always an issue. An understanding of the above physical processes is essential, if nanoparticles are to be used in applications in an optimal way. This thesis clarifies the mechanisms which control particle morphology, and paves way for the synthesis of nanostructured materials tailored for specific applications.

Loading of itraconazole into porous silica and silicon microparticles: characterization and dissolution tests

Most new drug molecules discovered today suffer from poor bioavailability. Poor oral bioavailability results mainly from poor dissolution properties of hydrophobic drug molecules, because the drug dissolution is often the rate-limiting event of the drug’s absorption through the intestinal wall into the systemic circulation. During the last few years, the use of mesoporous silica and silicon particles as oral drug delivery vehicles has been widely studied, and there have been promising results of their suitability to enhance the physicochemical properties of poorly soluble drug molecules. Mesoporous silica and silicon particles can be used to enhance the solubility and dissolution rate of a drug by incorporating the drug inside the pores, which are only a few times larger than the drug molecules, and thus, breaking the crystalline structure into a disordered, amorphous form with better dissolution properties. Also, the high surface area of the mesoporous particles improves the dissolution rate of the incorporated drug. In addition, the mesoporous materials can also enhance the permeability of large, hydrophilic drug substances across biological barriers. T he loading process of drugs into silica and silicon mesopores is mainly based on the adsorption of drug molecules from a loading solution into the silica or silicon pore walls. There are several factors that affect the loading process: the surface area, the pore size, the total pore volume, the pore geometry and surface chemistry of the mesoporous material, as well as the chemical nature of the drugs and the solvents. Furthermore, both the pore and the surface structure of the particles also affect the drug release kinetics. In this study, the loading of itraconazole into mesoporous silica (Syloid AL-1 and Syloid 244) and silicon (TOPSi and TCPSi) microparticles was studied, as well as the release of itraconazole from the microparticles and its stability after loading. Itraconazole was selected for this study because of its highly hydrophobic and poorly soluble nature. Different mesoporous materials with different surface structures, pore volumes and surface areas were selected in order to evaluate the structural effect of the particles on the loading degree and dissolution behaviour of the drug using different loading parameters. The loaded particles were characterized with various analytical methods, and the drug release from the particles was assessed by in vitro dissolution tests. The results showed that the loaded drug was apparently in amorphous form after loading, and that the loading process did not alter the chemical structure of the silica or silicon surface. Both the mesoporous silica and silicon microparticles enhanced the solubility and dissolution rate of itraconazole. Moreover, the physicochemical properties of the particles and the loading procedure were shown to have an effect on the drug loading efficiency and drug release kinetics. Finally, the mesoporous silicon particles loaded with itraconazole were found to be unstable under stressed conditions (at 38 qC and 70 % relative humidity).

Molecular characterization of sediment bacterial communities affected by fish farming

Fish farming introduces nutrients, microbes and a wide variety of chemicals such as heavy metals, antifoulants and antibiotics to the surrounding environment. Introduction of antibiotics has been linked with the increased incidence of antibiotic resistant pathogenic bacteria in the farm vicinities. In this thesis molecular methods such as quantitative PCR and DNA sequencing were applied to analyze bacterial communities in sediments from fish farms and pristine locations. Altogether four farms and four pristine sites were sampled in the Baltic Sea. Two farm and two pristine locations were sampled over a surveillance period of four years. Furthermore, a new methodology was developed as a part of the study that permits amplifying single microbial genomes and capturing them according to any genetic traits, including antibiotic resistance genes. The study revealed that several resistance genes for tetracycline were found at the sediment underneath the aquaculture farms. The copy number of these genes remained elevated even at a farm that had not used any antibiotics since year 2000, six years before this study started. Similarly, an increase in the amount of mercury resistance gene merA was observed at the aquaculture sediment. The persistence of the resistance genes in absence of any selection pressure from antibiotics or heavy metals suggests that the genes may be introduced to the sediment by the farming process. This is also supported by the diversity pattern of the merA gene between farm and pristine sediments. The bacterial community-level changes in response to fish farming were very complex and no single phylogenetic groups were found that would be typical to fish farm sediments. However, the community structures had some correlation with the exposure to fish farming. Our studies suggest that the established approaches to deal with antibiotic resistance at the aquaculture, such as antibiotic cycling, are fundamentally flawed because they cannot prevent the introduction of the resistance genes and resistant bacteria to the farm area by the farming process. Further studies are required to study the entire fish farming process to identify the sources of the resistance genes and the resistant bacteria. The results also suggest that in order to prevent major microbiological changes in the surrounding aquatic environment, the farms should not be founded in shallow water where currents do not transport sedimenting matter from the farms. Finally, the technique to amplify and select microbial genomes will potentially have a considerable impact in microbial ecology and genomics.

Position-sensitive silicon strip detector characterization using particle beams

Silicon strip detectors are fast, cost-effective and have an excellent spatial resolution. They are widely used in many high-energy physics experiments. Modern high energy physics experiments impose harsh operation conditions on the detectors, e.g., of LHC experiments. The high radiation doses cause the detectors to eventually fail as a result of excessive radiation damage. This has led to a need to study radiation tolerance using various techniques. At the same time, a need to operate sensors approaching the end their lifetimes has arisen. The goal of this work is to demonstrate that novel detectors can survive the environment that is foreseen for future high-energy physics experiments. To reach this goal, measurement apparatuses are built. The devices are then used to measure the properties of irradiated detectors. The measurement data are analyzed, and conclusions are drawn. Three measurement apparatuses built as a part of this work are described: two telescopes measuring the tracks of the beam of a particle accelerator and one telescope measuring the tracks of cosmic particles. The telescopes comprise layers of reference detectors providing the reference track, slots for the devices under test, the supporting mechanics, electronics, software, and the trigger system. All three devices work. The differences between these devices are discussed. The reconstruction of the reference tracks and analysis of the device under test are presented. Traditionally, silicon detectors have produced a very clear response to the particles being measured. In the case of detectors nearing the end of their lifefimes, this is no longer true. A new method benefitting from the reference tracks to form clusters is presented. The method provides less biased results compared to the traditional analysis, especially when studying the response of heavily irradiated detectors. Means to avoid false results in demonstrating the particle-finding capabilities of a detector are also discussed. The devices and analysis methods are primarily used to study strip detectors made of Magnetic Czochralski silicon. The detectors studied were irradiated to various fluences prior to measurement. The results show that Magnetic Czochralski silicon has a good radiation tolerance and is suitable for future high-energy physics experiments.