Variation in tracheid cross-sectional dimensions and wood viscoelasticity extent and control methods

Printing papers have been the main product of the Finnish paper industry. To improve properties and economy of printing papers, controlling of tracheid cross-sectional dimensions and wood viscoelasticity are examined in this study. Controlling is understood as any procedure which yields raw material classes with distinct properties and small internal variation. Tracheid cross-sectional dimensions, i.e., cell wall thickness and radial and tangential diameters can be controlled with methods such as sorting wood into pulpwood and sawmill chips, sorting of logs according to tree social status and fractionation of fibres. These control methods were analysed in this study with simulations, which were based on measured tracheid cross-sectional dimensions. A SilviScan device was used to measure the data set from five Norway spruce (Picea abies) and five Scots pine (Pinus sylvestris) trunks. The simulation results indicate that the sawmill chips and top pulpwood assortments have quite similar cross-sectional dimensions. Norway spruce and Scots pine are on average also relatively similar in their cross-sectional dimensions. The distributions of these species are somewhat different, but from a practical point of view, the differences are probably of minor importance. The controlling of tracheid cross-sectional dimensions can be done most efficiently with methods that can separate fibres into earlywood and latewood. Sorting of logs or partitioning of logs into juvenile and mature wood were markedly less efficient control methods than fractionation of fibres. Wood viscoelasticity affects energy consumption in mechanical pulping, and is thus an interesting control target when improving energy efficiency of the process. A literature study was made to evaluate the possibility of using viscoelasticity in controlling. The study indicates that there is considerable variation in viscoelastic properties within tree species, but unfortunately, the viscoelastic properties of important raw material lots such as top pulpwood or sawmill chips are not known. Viscoelastic properties of wood depend mainly on lignin, but also on microfibrillar angle, width of cellulose crystals and tracheid cross-sectional dimensions.

Median muotoilema : Muotoilun mediajulkisuus suomalaisessa talouslehdistössä

Designed by the Media The Media publicity of Design in the Finnish Economic Press The meaning of design has increased in consumer societies. Design is the subject of debate and the number of media discussions has also increased steadily. Especially the role of industrial design has been emphasised. In this study I examine the media publicity of design in the Finnish economic press from the late 1980s to the beginning of the 2000s. The research question is connected to media representations: How is design represented in the Finnish economic press? In other words, what are the central topics of design in the economic press, and to what issues are the media debates connected? The usually repeated phrase that design discussions take place only on the cultural pages of the daily press or in cultural contexts is being changed. Design is also linked to the consumer culture and consumers everyday practices. The research material has been collected from the Finnish economic press. The qualitative sample consists of articles from Kauppalehti, Taloussanomat and from several economic papers published by the Talentum Corporation. The approach of the research is explorative, descriptive and hermeneutic. This means that the economic press articles are used to explore how design is represented in the media. In addition, the characteristics of design represented in the media are described in detail. The research is based on the interpretive tradition of studying textual materials. Background assumptions are thus grounded in hermeneutics. Erving Goffman s frame analysis is applied in analysing the economic press materials. The frames interpreted from the articles depict the media publicity of design in the Finnish economic press. The research opens up a multidimensional picture of design in the economic press. The analysis resulted in five frames that describe design from various points of view. In the personal frame designers are described in private settings and through their personal experiences. The second frame relates to design work. In the frame of mastery of the profession, the designers work is interpreted widely. Design is considered from the aspects of controlling personal know-how, co-operation and the overall process of design. The third frame is connected to the actual substance of the economic press. In the frame of economy and market, design is linked to international competitiveness, companies competitive advantage and benefit creation for the consumers. The fourth frame is connected to the actors promoting design on a societal level. In the communal frame, the economic press describes design policy, design research and education and other actors that actively develop design in the societal networks. The last frame is linked to the traditions of design and above all to the examination of the cultural transition. In the frame of culture the traditions of design are emphasised. Design is also connected to the industrial culture and furthermore to the themes of the consumer culture. It can be argued that the frames construct media publicity of design from various points of view. The frames describe situations, action and the actors of design. The interpreted media frames make it possible to understand the relation of interpreted design actions and the culture. Thus, media has a crucial role in representing and recreating meanings related to design. The publicity of design is characterised by the five focal themes: personification, professionalisation, commercialisation, communalisation and transition of cultural focus from the traditions of design to the industrial culture and the consumer culture. Based on my interpretation these themes are guided by the mediatisation of design. The design phenomenon is defined more often on the basis of the media representations in the public discourses. The design culture outlined in this research connects socially constructed and structurally organised action. Socially constructed action in design is connected to the experiences, social recreation and collective development of design. Structurally, design is described as professional know-how, as a process and as an economic profit generating action in the society. The events described by the media affect the way in which people experience the world, the meanings they connect to the events around themselves and their life in the world. By affecting experiences, the media indirectly affects human actions. People have become habituated to read media representations on a daily basis, but they are not used to reading and interpreting the various meanings that are incorporated in the media texts.

Suomen maankuoren kivilajikoostumuksen tulkinta seismisistä aineistoista

Aim of this study is to investigate composition of the crust in Finland using seismic wide-angle velocity models and laboratory measurements on P- and S-wave velocities of different rock types. The velocities adopted from wide-angle velocity models were compared with laboratory velocities of different rock types corrected for the crustal PT conditions in the study area. The wide-angle velocity models indicate that the P-wave velocity does not only increase step-wise at boundaries of major crustal layers, but there is also gradual increase of velocity within the layers. On the other hand, the laboratory measurements of velocities indicate that no single rock type is able to provide the gradual downward increasing trends. Thus, there must be gradual vertical changes in rock composition. The downward increase of velocities indicates that the composition of the crust becomes gradually more mafic with increasing depth. Even though single rock types cannot simulate the wide-angle model velocities, it can be done with a mixture of rock types. There are a large number of rock type mixtures giving the correct P-wave velocities. Therefore, the inverse solution of rock types and their proportions from velocities is a non-unique problem if only P-wave velocities is available. Amount of the possible rock type mixtures can be limitted using S-wave velocities, reflection seismic results and other geological and geophysical results of the study area. Crustal model FINMIX-2 is presented in this study and it suggest that the crustal velocity profiles can be simulated with rock type mixtures, where the upper crust consists of felsic gneisses and granitic-granodioritic rocks with a minor contribution of quartzite, amphibolite and diabase. In the middle crust the amphibolite proportion increases. The lower crust consists of tonalitic gneiss, mafic garnet granulite, hornblendite, pyroxenite and minor mafic eclogite. This composition model is in agreement with deep crustal kimberlite-hosted xenolith data in eastern Finland and reflectivity of the FIRE (Finnish Reflection Experiment). According to FINMIX-2 model the Moho is deeper and the crustal composition is a more mafic than an average global continental model would suggest. Composition models of southern Finland are quite similar than FINMIX-2 model. However, there are minor differencies between the models, which indicates areal differences of composition. Models of northern Finland shows that the crustal thickness is smaller than southern Finland and composition of the upper crust is different. Density profiles calculated from the lithological models suggest that there is practically no density contrast at Moho in areas of the high-velocity lower crust. This implies that crustal thickness in the central Fennoscandian Shield may have been controlled by the densities of the lower crustal and upper mantle rocks.

Digital elevation model error in terrain analysis

Digital elevation models (DEMs) have been an important topic in geography and surveying sciences for decades due to their geomorphological importance as the reference surface for gravita-tion-driven material flow, as well as the wide range of uses and applications. When DEM is used in terrain analysis, for example in automatic drainage basin delineation, errors of the model collect in the analysis results. Investigation of this phenomenon is known as error propagation analysis, which has a direct influence on the decision-making process based on interpretations and applications of terrain analysis. Additionally, it may have an indirect influence on data acquisition and the DEM generation. The focus of the thesis was on the fine toposcale DEMs, which are typically represented in a 5-50m grid and used in the application scale 1:10 000-1:50 000. The thesis presents a three-step framework for investigating error propagation in DEM-based terrain analysis. The framework includes methods for visualising the morphological gross errors of DEMs, exploring the statistical and spatial characteristics of the DEM error, making analytical and simulation-based error propagation analysis and interpreting the error propagation analysis results. The DEM error model was built using geostatistical methods. The results show that appropriate and exhaustive reporting of various aspects of fine toposcale DEM error is a complex task. This is due to the high number of outliers in the error distribution and morphological gross errors, which are detectable with presented visualisation methods. In ad-dition, the use of global characterisation of DEM error is a gross generalisation of reality due to the small extent of the areas in which the decision of stationarity is not violated. This was shown using exhaustive high-quality reference DEM based on airborne laser scanning and local semivariogram analysis. The error propagation analysis revealed that, as expected, an increase in the DEM vertical error will increase the error in surface derivatives. However, contrary to expectations, the spatial au-tocorrelation of the model appears to have varying effects on the error propagation analysis depend-ing on the application. The use of a spatially uncorrelated DEM error model has been considered as a 'worst-case scenario', but this opinion is now challenged because none of the DEM derivatives investigated in the study had maximum variation with spatially uncorrelated random error. Sig-nificant performance improvement was achieved in simulation-based error propagation analysis by applying process convolution in generating realisations of the DEM error model. In addition, typology of uncertainty in drainage basin delineations is presented.

Inverse Problem for Fractional Brownian Motion with Discrete Data

The problem of recovering information from measurement data has already been studied for a long time. In the beginning, the methods were mostly empirical, but already towards the end of the sixties Backus and Gilbert started the development of mathematical methods for the interpretation of geophysical data. The problem of recovering information about a physical phenomenon from measurement data is an inverse problem. Throughout this work, the statistical inversion method is used to obtain a solution. Assuming that the measurement vector is a realization of fractional Brownian motion, the goal is to retrieve the amplitude and the Hurst parameter. We prove that under some conditions, the solution of the discretized problem coincides with the solution of the corresponding continuous problem as the number of observations tends to infinity. The measurement data is usually noisy, and we assume the data to be the sum of two vectors: the trend and the noise. Both vectors are supposed to be realizations of fractional Brownian motions, and the goal is to retrieve their parameters using the statistical inversion method. We prove a partial uniqueness of the solution. Moreover, with the support of numerical simulations, we show that in certain cases the solution is reliable and the reconstruction of the trend vector is quite accurate.

AndroMedia - Towards a Context-aware Mobile Music Recommender

Portable music players have made it possible to listen to a personal collection of music in almost every situation, and they are often used during some activity to provide a stimulating audio environment. Studies have demonstrated the effects of music on the human body and mind, indicating that selecting music according to situation can, besides making the situation more enjoyable, also make humans perform better. For example, music can boost performance during physical exercises, alleviate stress and positively affect learning. We believe that people intuitively select different types of music for different situations. Based on this hypothesis, we propose a portable music player, AndroMedia, designed to provide personalised music recommendations using the user’s current context and listening habits together with other user’s situational listening patterns. We have developed a prototype that consists of a central server and a PDA client. The client uses Bluetooth sensors to acquire context information and logs user interaction to infer implicit user feedback. The user interface also allows the user to give explicit feedback. Large user interface elements facilitate touch-based usage in busy environments. The prototype provides the necessary framework for using the collected information together with other user’s listening history in a context- enhanced collaborative filtering algorithm to generate context-sensitive recommendations. The current implementation is limited to using traditional collaborative filtering algorithms. We outline the techniques required to create context-aware recommendations and present a survey on mobile context-aware music recommenders found in literature. As opposed to the explored systems, AndroMedia utilises other users’ listening habits when suggesting tunes, and does not require any laborious set up processes.

Nuorten arvot ja tietoyhteiskunta-asenteet

The aim of this study was to explore the sociocultural value orientations of Finnish adolescents and their attitudes toward information society. In addition, this study explored the association between values and attitudes toward information society. I investigated whether values and attitudes follow social development and whether they can be divided into value categories such as traditional, modern and postmodern. This study falls into the category of youth research. The study uses a multimethodological approach and straddles the following disciplines: the science of education, religious education, sociology and social psychology. The theoretical context of the study is modernisation, understood as a two level process. The first level represents the transition from a religious-based traditional society to a modern industrial society. The second level of modernisation refers to the process of development established after the second world war, called postmodernisation, which is understood as the transition from an emphasis on economical imperatives to an emphasis on subjective well-being and the quality of life. Postmodernisation influences both social organisations and individuals´ values and worldviews. The target group of this survey-study comprised 408 16- to 19-year-old Finnish adolescent students from secondary school and vocational school. The data were gathered with a quantitative questionnaire during the second half of 2001. The results of the study can be generalised to the population of Finnish 16- to 19-year-olds. The data were analysed quantitatively using ANOVA and multivariate analyses such as cluster analysis, factor analysis and general linear modeling. Bayesian dependence modeling served to explore further how the values predict the attitudes toward information society. The results indicate that values are associated not only with attitudes toward information society, but with many other sociocultural indicator as well. Especially strong interpreting indicators included gender and identity or lifestyle questions. The results also indicate an association between values, attitudes and social development and a two-level modernisation process. Values formed traditional, modern and postmodern value systems. Keywords: values, attitudes, modernisation, information society, traditional, modern, postmodern

Pyhä Teresa ja keskiajan mystiikan teoriat

In my dissertation I have studied St Teresa (1515-1582) in the light of medieval mystical theories. I have two main levels in my research: historical and theological. On the historical level I study St Teresa s personal history in the context of her family and the Spanish society. On the theological level I study both St Teresa s mysticism and her religious experience in the light of medieval mysticism. St Teresa wrote a book called Life , which is her narrative autobiography and story about her mystical spiritual formation. She reflected herself through biblical texts interpreting them in the course of the biblical hermeneutics like allegory, typology, tropology and anagogy. In addition to that she read others life stories from her period of time, but reflected herself only slightly through the sociological point of view. She used irony as a means to gain acceptance to her authority and motive to write. Her position has been described as a double bind because of writing at the request of educated men and to the non-educated women as she herself was uneducated. She used irony as a means to achieve valuation to women, to gain negative attributes connected to them and to gain authority to teach them mystical spirituality, the Bible and prayer. In this ironic tendency she was a feminist writer. In order to understand medieval mysticism I have written in the first chapter a review of the main trends in medieval mysticism in connection with the classical emotional theories. Two medieval mystical theories show an important role in St Teresa s mysticism. One is love mysticism and the other is the three partite way of mysticism (purification, illumination and union). The classic-philosophical emotional theories play a role in both patterns. The theory of love mysticism St Teresa interpreted in the traditional way stressing the spiritual meaning of love in connexion with God and neighbors. Love is an emotion, which is bound with other emotions, but all objects of love don t strengthen spiritual love. In the three partite way of mysticism purification means to find biblical values in life and to practice meditative self-knowledge theologically interpreted. In illumination human understanding has to be illuminated by God and united to mystical knowledge from God. St Teresa considered illumination a way to learn things. Illumination has also psychological aspects like recognition of many trials and pains, which come from life on earth. Theologically interpreted in illumination one should die to oneself, let oneself be transformed and renewed by God. I have also written a review of the modern philosophical discussion on personal identity where memory and mental experiences are important creators of personal identity. St Teresa bound medieval mystical teaching together with her personal religious experience. Her personal identity is by its character based on her narrative life story where mental experiences play important role. Previous researchers have labelled St Teresa as an ecstatic person whose experiences produced ecstatic phenomena to the mysticism. These phenomena combined with visions have in one respect made of her a person who has brought physical and visionary tendencies to theology. In spite of that she also represents a modern tendency trying to give words to experiences, which at first seem to be exceptional and extreme and which are easily interpreted as one-sided either physical or sexual or unsaid. In other respect I have stressed the personality of St Teresa that was represented as both strong and weak. The strong personality for her is demonstrated by religious faith and in its practice. The weak personality was for her a natural personal identity. St Teresa saw a unifying aspect in almost all. Firstly, her mysticism was aimed towards union with God and secondly, the unifying aspects and common rules in human relations in community life were central. Union with God is based on the fact that in a soul God is living in its centre, where God is present in the Trinitarian way. The picture of God in ourselves is a mirror but to get to know God better is to recognize his/her presence in us. When the soul recognizes itself as a dwelling place of God, it knows itself as God knows him/herself. There is equality between God and the soul. To be a Christian means to participate in God in his Trinitarian being. The participation to God is a process of divinization that puts a person into transformation, change and renewal. The unitive aspect concludes also knowledge of opposites between experience of community and solitude as well as community and separateness. As a founder of monasteries St Teresa practiced theology of poverty. She renewed the monastic life founding a rule called discalced that stressed ascetic tendencies. Supporters of her work were after the difficulties in the beginning both society and churchly leaders. She wrote about the monasteries including in her description at times seriousness at times humor and irony. Her stories are said to be picaresque histories that contain stories of ordinary laymen and many unexpected occasions. She exercised a kind of Bakhtinian dialogue in her letters. St Teresa stressed the virtues like sacrifice, determination and courage in the monastic life. Most of what she taught of virtues is based on biblical spirituality but there are also psychological tendencies in her writings. The theological pedagogical advice is mixed with psychology, but she herself made no distinction between different aspects in her teaching. To understand St Teresa and her mysticism is to recognize that she mixes her personal religious experience and mysticism, which widens mysticism to religious experience in a new way, although this corresponds also the very definition of mysticism. St Teresa concentrated on mental-spiritual experiences and the aim of her mystical teaching was to produce a human mind well cured like a garden that has God as its gardener.

The church must become the people of Soweto : Manas Buthelezi’s existential-Christocentric understanding of the church

The aim of this study has been to discern what Manas Buthelezi (1935-), a black South African Lutheran theologian and later also a bishop, regards as the requirements a church has to fulfill in order to be credible in the apartheid society. Buthelezi’s dissertation and several articles written between the years 1968 and 1993 are the sources of this study. Also the lectures held in Heidelberg in 1972 are referred to. Systematic analysis is the method used. The question of the credibility of the church is studied through three concepts that play an important role in Buthelezi’s ecclesiological thought, namely the wholeness of life, incarnation and liberation. The notion of the wholeness of life stems from the African tradition. Buthelezi takes the concept into the Christian church: the church should realize that God is the Creator of all life and Christ the lord of every aspect of human existence. Life is one entity coram Deo. However, the church is not to become the world; solidarity between the two must remain critical as the church is also called to play a prophetic role in the society. The church is in an open relationship with the world. It has a unique message of forgiveness and reconciliation. Nevertheless, the message is not a possession of the church but it is addressed to the whole world. The meaning of incarnation comes close to that of the wholeness of life. Following the example of Christ’s incarnation, the church must become human in the reality of the people. The church in Soweto is to become the people of Soweto, that is, the church must become as vulnerable as the people are. An incarnate church cannot be immune to the oppression that people experience, because the people are the church. The church is therefore bound to suffer. Buthelezi’s theology of the cross is pragmatic: the suffering of the church aims at the liberation of the oppressed. At times the physical presence of the church by the side of the suffering people is the only way to preach the incarnate gospel. In the South Africa of the late 1960s onwards the liberation of the oppressed black people was high on the agenda of Black Theology. As a leader of the early South African Black Theology, Buthelezi is concerned about the racial injustice in his country. He urges the churches to join the struggle against it as one people of God. The notions of liberation and the wholeness of life emerge in Buthelezi’s holistic understanding of liberation that involves the inner liberation of the black spirit and the liberation of the economic, social and political aspects of life. Interpreting Tillich’s correlation method in the South African situation, and also paralleling other liberation theologians, Buthelezi takes the existential situation of the people as the starting point for liberation. The gospel has to respond to the existential questions of people. The church is called to work for the liberation of society but it must also be liberated itself. Buthelezi initiated the LWF statement on the status confessionis in South Africa (1977). In line with the statement, he calls for church unity on the human level. For the unity to be true, it has to be experienced on the grassroots’ level. All the three concepts covered urge the church to come down from any ivory tower and out of any spiritual haven it might hide in. A lot of the credibility of the church derives from the behavior of the people. Buthelezi’s concentration on how the people who constitute the church should live their faith leaves less attention to how God constitutes the church. I have labeled Buthelezi’s understanding of the church existential-Christocentric due to the emphasis he lays on the need of the church to take the existential situation of the people seriously and on the other hand, on Christ as the exemplar for the church.

Studies on Wage Differentials and Labour Market Transitions

This thesis consists of four studies. The first study examines wage differentials between women and men in the Finnish manufacturing sector. A matched employer-employee data set is used to decompose the overall gender wage gap into the contributions of sex differences in human capital, labour market segregation, and residual within-job wage differentials. The topic of the second study is the relationship between the extended unemployment benefits and labour market transitions of older workers. The analysis exploits a quasi-experimental setting caused by a change in the law that raised the eligibility age of workers benefiting from extended benefits. Roughly half of the unemployed workers with extended benefits are estimated to be effectively withdrawn from labour market search. The risk of unemployment declined and the re-employment probability increased among the age groups directly affected by the reform. The third study provides an empirical analysis of a structural equilibrium search model. Estimation results from various model specifications are compared and discussed. The last study is a methodological study where the difficulties of interpreting the results of competing risks hazard models are discussed and a solution for a particular class of models is proposed. It is argued that a common practice of reporting the results of qualitative response models in terms of marginal effects is also useful in the context of competing risks duration models.

Bioavailability and toxicity of chemicals in inland waters : the importance of prevailing water chemistry and implications for risk assessment

Physicochemical characterization of freshwater samples from Finland, Sweden, the Netherlands, and Spain revealed that water hardness and pH decreased and the quantity and quality of humic substances changed considerably in this geographical series from south to north. Since the ambient water chemistry may affect the availability of chemicals, the total aqueous concentration of a chemical may be insufficient to predict the bioconcentration, subsequent biological response, and thus risk. In addition, organisms could be affected directly by water quality characteristics. In this context the main objective of this thesis was to investigate the bioavailability of selected ecotoxicologically relevant chemicals (cadmium, benzo(a)pyrene, and pyrene) in various European surface waters and to show the importance of certain water chemistry characteristics in interpreting the bioavailability and toxicity results. The bioavailability of cadmium to Daphnia magna was examined in very soft humic lake water. Humic substances as natural ligands decreased the free and bioavailable proportion of cadmium in soft lake water. As a consequence the uptake rate and the acute toxicity decreased compared with the humic-free reference. When the hardness of humic lake water was artificially elevated, the acute toxicity of cadmium decreased, although the proportion of free cadmium increased. The decreased bioavailability of cadmium in hard water was a result of effective competition for uptake by the hardness cations, especially calcium ions. The protective role of humic substances and water hardness against cadmium toxicity was also observed in Lumbriculus variegatus, although D. magna was more sensitive to cadmium. The bioavailability of two polycyclic aromatic hydrocarbons (PAHs), pyrene and benzo(a)pyrene, was studied in European surface waters of varying water chemistry. Humic substances acted as complexing ligands with both PAHs, but the bioavailability of the more lipophilic benzo(a)pyrene to D. magna was affected more by humic substances than that of pyrene. In addition, not only the quantity of humic substances, but also their quality affected the bioavailability of benzo(a)pyrene. Nevertheless, the humic substances played a protective role in the photo-enhanced toxicity of pyrene under UV-B radiation. Water hardness had no effect on pyrene toxicity. Results indicate that the typical physicochemical characteristics of boreal freshwaters should be considered carefully in local and regional risk assessment of chemicals concerning the Fennoscandian region.

Should I stay or should I go? : Reproductive and dispersal strategies of site-specific liverwort species

The area of intensively managed forests, in which required conditions for several liverwort species are seldom found, has expanded over the forest landscape during the last century. Liverworts are very sensitive to habitat changes, because they demand continuously moist microclimate. Consequently, about third of the forest liverworts have been classified as threatened or near threatened in Finland. The general objective of this thesis is to increase knowledge of the reproductive and dispersal strategies of the substrate-specific forest bryophytes. A further aim was to develop recommendations for conservation measures for species inhabiting unstable and stable habitats in forest landscape. Both population ecological and genetic methods have been applied in the research. Anastrophyllum hellerianum inhabits spatially and temporally limited substrate patches, decaying logs, which can be considered as unstable habitats. The results show that asexual reproduction by gemmae is the dominant mode of reproduction, whereas sexual reproduction is considerably infrequent. Unlike previously assumed, not only spores but also the asexual propagules may contribute to long-distance dispersal. The combination of occasional spore production and practically continuous, massive gemma production facilitates dispersal both on a local scale and over long distances, and it compensates for the great propagule losses that take place preceding successful establishment at suitable sites. However, establishment probability of spores may be restricted because of environmental and biological limitations linked to the low success of sexual reproduction. Long-lasting dry seasons are likely to result in a low success of sexual reproduction and decreased release rate of gemmae from the shoots, and consequent fluctuations in population sizes. In the long term, the substratum limitation is likely to restrict population sizes and cause local extinctions, especially in small-sized remnant populations. Contrastingly, larger forest fragments with more natural disturbance dynamics, to which the species is adapted, are pivotal to species survival. Trichocolea tomentella occupies stable spring and mesic habitats in woodland. The relatively small populations are increasingly fragmented with a high risk for extinction for extrinsic reasons. The results show that T. tomentella mainly invests in population persistence by effective clonal growth via forming independent ramets and in competitive ability, and considerably less in sexuality and dispersal potential. The populations possess relatively high levels of genetic diversity regardless of population size and of degree of isolation. Thus, the small-sized populations inhabiting stable habitats should not be neglected when establishing conservation strategies for the species and when considering the habitat protection of small spring sites. Restricted dispersal capacity, also on a relatively small spatial scale, is likely to prevent successful (re-)colonization in the potential habitat patches of recovering forest landscapes. By contrast, random short-range dispersal of detached vegetative fragments within populations at suitable habitat seems to be frequent. Thus, the restoration actions of spring and streamside habitats close to the populations of T. tomentella may contribute to population expansion. That, in turn, decreases the harmful effects of environmental stochasticity.

Ecological communities in variable environments : dynamics and diversity under coloured environmental stochasticity

While environmental variation is an ubiquitous phenomenon in the natural world which has for long been appreciated by the scientific community recent changes in global climatic conditions have begun to raise consciousness about the economical, political and sociological ramifications of global climate change. Climate warming has already resulted in documented changes in ecosystem functioning, with direct repercussions on ecosystem services. While predicting the influence of ecosystem changes on vital ecosystem services can be extremely difficult, knowledge of the organisation of ecological interactions within natural communities can help us better understand climate driven changes in ecosystems. The role of environmental variation as an agent mediating population extinctions is likely to become increasingly important in the future. In previous studies population extinction risk in stochastic environmental conditions has been tied to an interaction between population density dependence and the temporal autocorrelation of environmental fluctuations. When populations interact with each other, forming ecological communities, the response of such species assemblages to environmental stochasticity can depend, e.g., on trophic structure in the food web and the similarity in species-specific responses to environmental conditions. The results presented in this thesis indicate that variation in the correlation structure between species-specific environmental responses (environmental correlation) can have important qualitative and quantitative effects on community persistence and biomass stability in autocorrelated (coloured) environments. In addition, reddened environmental stochasticity and ecological drift processes (such as demographic stochasticity and dispersal limitation) have important implications for patterns in species relative abundances and community dynamics over time and space. Our understanding of patterns in biodiversity at local and global scale can be enhanced by considering the relevance of different drift processes for community organisation and dynamics. Although the results laid out in this thesis are based on mathematical simulation models, they can be valuable in planning effective empirical studies as well as in interpreting existing empirical results. Most of the metrics considered here are directly applicable to empirical data.

Features of the geomagnetic field during the Holocene and Proterozoic

The geomagnetic field is one of the most fundamental geophysical properties of the Earth and has significantly contributed to our understanding of the internal structure of the Earth and its evolution. Paleomagnetic and paleointensity data have been crucial in shaping concepts like continental drift, magnetic reversals, as well as estimating the time when the Earth's core and associated geodynamo processes begun. The work of this dissertation is based on reliable Proterozoic and Holocene geomagnetic field intensity data obtained from rocks and archeological artifacts. New archeomagnetic field intensity results are presented for Finland, Estonia, Bulgaria, Italy and Switzerland. The data were obtained using sophisticated laboratory setups as well as various reliability checks and corrections. Inter-laboratory comparisons between three laboratories (Helsinki, Sofia and Liverpool) were performed in order to check the reliability of different paleointensity methods. The new intensity results fill up considerable gaps in the master curves for each region investigated. In order to interpret the paleointensity data of the Holocene period, a novel and user-friendly database (GEOMAGIA50) was constructed. This provided a new tool to independently test the reliability of various techniques and materials used in paleointensity determinations. The results show that archeological artifacts, if well fired, are the most suitable materials. Also lavas yield reliable paleointensity results, although they appear more scattered. This study also shows that reliable estimates are obtained using the Thellier methodology (and its modifications) with reliability checks. Global paleointensity curves during Paleozoic and Proterozoic have several time gaps with few or no intensity data. To define the global intensity behavior of the Earth's magnetic field during these times new rock types (meteorite impact rocks) were investigated. Two case histories are presented. The Ilyinets (Ukraine) impact melt rocks yielded a reliable paleointensity value at 440 Ma (Silurian), whereas the results from Jänisjärvi impact melts (Russian Karelia, ca. 700 Ma) might be biased towards high intensity values because of non-ideal magnetic mineralogy. The features of the geomagnetic field at 1.1 Ga are not well defined due to problems related to reversal asymmetries observed in Keweenawan data of the Lake Superior region. In this work new paleomagnetic, paleosecular variation and paleointensity results are reported from coeval diabases from Central Arizona and help understanding the asymmetry. The results confirm the earlier preliminary observations that the asymmetry is larger in Arizona than in Lake Superior area. Two of the mechanisms proposed to explain the asymmetry remain plausible: the plate motion and the non-dipole influence.

Two views on interstellar dust: near-infrared scattering and polarized thermal dust emission

Interstellar clouds are not featureless, but show quite complex internal structures of filaments and clumps when observed with high enough resolution. These structures have been generated by 1) turbulent motions driven mainly by supernovae, 2) magnetic fields working on the ions and, through neutral-ion collisions, on neutral gas as well, and 3) self-gravity pulling a dense clump together to form a new star. The study of the cloud structure gives us information on the relative importance of each of these mechanisms, and helps us to gain a better understanding of the details of the star formation process. Interstellar dust is often used as a tracer for the interstellar gas which forms the bulk of the interstellar matter. Some of the methods that are used to derive the column density are summarized in this thesis. A new method, which uses the scattered light to map the column density in large fields with high spatial resolution, is introduced. This thesis also takes a look at the grain alignment with respect to the magnetic fields. The aligned grains give rise to the polarization of starlight and dust emission, thus revealing the magnetic field. The alignment mechanisms have been debated for the last half century. The strongest candidate at present is the radiative torques mechanism. In the first four papers included in this thesis, the scattered light method of column density estimation is formulated, tested in simulations, and finally used to obtain a column density map from observations. They demonstrate that the scattered light method is a very useful and reliable tool in column density estimation, and is able to provide higher resolution than the near-infrared color excess method. These two methods are complementary. The derived column density maps are also used to gain information on the dust emissivity within the observed cloud. The two final papers present simulations of polarized thermal dust emission assuming that the alignment happens by the radiative torques mechanism. We show that the radiative torques can explain the observed decline of the polarization degree towards dense cores. Furthermore, the results indicate that the dense cores themselves might not contribute significantly to the polarized signal, and hence one needs to be careful when interpreting the observations and deriving the magnetic field.