高能~(136)Xe离子辐照聚酰亚胺化学改性的电子能损效应

用1.755GeV136Xe离子在真空室温环境下辐照叠层聚酰亚胺薄膜,通过红外和紫外光谱测量研究了高电子能损离子辐照引起的化学降解及炔基产生效应。红外测量结果表明,典型官能团随辐照注量的增加指数降解,且径迹芯中所有官能团均遭到破坏,对应8.8(最小能损,第一层)和11.5keV/nm(最大能损,第五层)电子能损,136Xe辐照聚酰亚胺的平均降解半径分别为3.6和4.1nm。而相应能损条件下炔基的生成截面分别为5.6和5.9nm大于官能团的降解截面。紫外结果表明辐照引起的吸光度的改变随辐照注量线性增加,发色团的产生效率随电子能损的增大而增加。

15.14 MeV/u ~(136)Xe离子引起的单粒子效应(英文)

研究了 1 5.1 4MeV/u136 　Xe离子在不同批次的 3 2k× 8bits静态存储器中所引起的单粒子效应 .获得了单粒子翻转和单粒子闭锁截面与入射角度的依赖关系 .将单粒子效应截面与灵敏区中沉积的能量相联系 ,而不是线性能量转移(LET)值 .估计了灵敏体积的深度和死层的厚度 .

~(136)Ba的10~+同质异能态

利用 450MeV的82 Se束流轰击139La靶 ,通过核子转移反应产生了136 Ba ,用在束γ谱学方法测量了其激发态的γ衰变 ,观测到了它的 1 0 +态同质异能态并得到该同质异能态的寿命为 94ns.

压阻式高量程微加速度计的冲击校准

采用体硅微机械加工技术和扩散技术，制作压阻式高量程微加速度计，设计量程为50000 g_n。芯片材料为单晶硅，采用双列扁平陶瓷封装。为了测量其动态灵敏度，使用Hopkinson杆在约40000 g_n的加速度水平下进行了冲击校准。在电桥电压为6.33V的情况下，被测微加速度计的灵敏度为1.26 μV/g_n。

Shear Localization In Dynamic Deformation: Microstructural Evolution

Investigations made by the authors and collaborators into the microstructural aspects of adiabatic shear localization are critically reviewed. The materials analyzed are low-carbon steels, 304 stainless steel, monocrystalline Fe-Ni-Cr, Ti and its alloys, Al-Li alloys, Zircaloy, copper, and Al/SiCp composites. The principal findings are the following: (a) there is a strain-rate-dependent critical strain for the development of shear bands; (b) deformed bands and white-etching bands correspond to different stages of deformation; (c) different slip activities occur in different stages of band development; (d) grain refinement and amorphization occur in shear bands; (e) loss of stress-carrying capability is more closely associated with microdefects rather than with localization of strain; (f) both crystalline rotation and slip play important roles; and (g) band development and band structures are material dependent. Additionally, avenues for new research directions are suggested.

A Multimoment Finite-Volume Shallow-Water Model On The Yin-Yang Overset Spherical Grid

A numerical model for shallow-water equations has been built and tested on the Yin-Yang overset spherical grid. A high-order multimoment finite-volume method is used for the spatial discretization in which two kinds of so-called moments of the physical field [i.e., the volume integrated average ( VIA) and the point value (PV)] are treated as the model variables and updated separately in time. In the present model, the PV is computed by the semi-implicit semi-Lagrangian formulation, whereas the VIA is predicted in time via a flux-based finite-volume method and is numerically conserved on each component grid. The concept of including an extra moment (i.e., the volume-integrated value) to enforce the numerical conservativeness provides a general methodology and applies to the existing semi-implicit semi-Lagrangian formulations. Based on both VIA and PV, the high-order interpolation reconstruction can only be done over a single grid cell, which then minimizes the overlapping zone between the Yin and Yang components and effectively reduces the numerical errors introduced in the interpolation required to communicate the data between the two components. The present model completely gets around the singularity and grid convergence in the polar regions of the conventional longitude-latitude grid. Being an issue demanding further investigation, the high-order interpolation across the overlapping region of the Yin-Yang grid in the current model does not rigorously guarantee the numerical conservativeness. Nevertheless, these numerical tests show that the global conservation error in the present model is negligibly small. The model has competitive accuracy and efficiency.

Dynamic mode I perturbation solution for a moving crack unsteadily

Rice et al. (Jounal of Mechanics and Physics of Solids 42, 813-843) analyze the propagation of a planar crack with a nominally straight front in a model elastic solid with a single displacement component. Using the form of Willis er al. (Journal of the Mechanics and Physics of Solids 43, 319-341), of dynamic mode I weight functions for a moving crack, we address that problem solved by Rice ei al. in the 3D context of elastodynamic theory. Oscillatory crack tip motion results from constructive-destructive interference of stress intensity waves. Those waves, including system of the dilatational, shear and Rayleigh waves, interact on each other and with moving edge of crack, can lead to continuing fluctuations of the crack front and propagation velocity. (C) 1997 Elsevier Science Ltd.

铝粉快速反应光谱的研究

使用光学多道分析仪（ＯＭＡ）详细收集了氢氧气体爆炸产物激励下，两种不同粒度的铝粉在不同氧含量条件下快速反应的低分辨和高分辨光谱。实验结果表明在２４０～８５０ｎｍ的光谱范围内的辐射以连续辐射为主，并有较弱的铝原子线和ＡｌＯ的Ｂ２Σ＋→Ｘ２Σ＋带光谱。

参量调制驱动环形等离子体稳态电流的简化分析

本文用简化模型分析托卡马克装置,建议用等离子体往径向速度振荡和角向磁场振荡的相互作用产生一个定常环向电动势以驱动稳态电流。这可由按一定相位差调制两个外加参量来达到。按反应堆参数估计,这种调制频率可以是工业频率。

大速差同向射流——一种新型火焰稳定与强化燃烧的空气动力学原理

本文介绍了一种稳定火焰和强化燃烧的新型空气动力学原理——大速差同向射流技术。单股或多股高速小射流(空气、蒸汽或其它气体)与低速的主气流(燃料和空气混合物)同方向射入燃烧室,可以产生高湍流强度的大回流区,从而可以使可燃混合物与高温回流烟气有效地混合,以维持燃烧室内稳定而强化地燃烧,甚至对于着火性能很差的燃料也是如此。这是继传统的旋流燃烧器和钝体燃烧器之后又一种新型的有效而实用的火焰稳定方法。基于这种原理研制的煤粉燃烧器更具有优良的性能,并且在结构上也很简单。这种类型的煤粉预燃室,已经在电站和工业锅炉上安装使用。目前,使用这种预燃室可以在冷风条件下成功地启动贫煤(V~f<15％,A~f>30％)锅炉及低负荷情况下仍能维持燃烧。这项新技术所展示的火焰稳定和强化燃烧原理在燃烧界引起了广泛的关注和兴趣。

第2届全国疲劳学术会议

<正> 中国力学学会、中国航空学会、中国机械工程学会联合召开的第2届全国疲劳学术会议,于1984年10月8—11日在四川峨眉西南交通大学举行,参加会议代表150多人,宣读和交流126篇论文,并进行了专题讨论,论文内容大致包括以下几个方面。

On the interaction of water waves and seabed by the porous medium model

The interaction of water waves and seabed is studied by using Yamamoto's model, which takes into account the deformation of soil skeletal frame, compressibility of pore fluid flow as well as the Coulumb friction. When analyzing the propagation of three kinds of stress waves in seabed, a simplified dispersion relation and a specific damping formula are derived. The problem of seabed stability is further treated analytically based on the Mohr-Coulomb theory. The theory is finally applied to the coastal problems in the Lian-Yun Harbour and compared with observations and measurements in soil-wave tank with satisfactory results.