HEH（EHP）、H（DEHP）萃取铒（III）的动力学和机理的研究

萃取动力学的研究方法主要有：恒界面池法，充分混合法，单液滴法、生长液滴法，短时间相接触法和支撑液膜法。由于生长液滴法仪器简单，易于操作，且对于萃取速率快的体系尤为适宜，从而受到人们的注意。本文主要采用生长液滴法和充分混合法。本文分别研究了HEH（EHP）、H（DEHP）从盐酸介质中萃取E_r（III）的动力学和HEH（EHP）从硫酸介质中萃取E_rIII）的动力学，并讨论了萃取机理。实验表明，对于不同的萃取体系，其萃取机理不同。本论文做了以下几个方面的工作。1、HEH（EHP）从HCl介质中萃取E_r(III）的动力学和机理；2、HEH（EHP）从H_2SO_4介质中萃取E_r(III）的动力学和机理；3、H（DEHP）从HCl介质中萃取Er(III）的动力学。

铜（III）及相关化合物的合成和性质的研究，稀土复合氟化物电性、氧敏和氢敏性质

本论文包括两部分内容。第一部分为“Cu(III)及相关化合物的合成和性质的研究”；第二部分为“稀土复合氟化物的电性、氧敏和氢敏性质”。第一部分的主要内容有：1.制备了Na_4H[Cu(H_2TeO_6)_2]·17H_2O和Na_4K[Cu(HIO_6)_2]·12H_2O的Cu(III)单晶配合物。2.在比较相应的Cu(II)化合物的条件下，详细地研究了这二个Cu(III)配合物的电子光谱和Cu2p光电子能谱，由于价态升高，场强参数增大，Cu(III)化合物的d-d跃迁相对于Cu(II)化合物d-d跃迁，发生“蓝移”。3.成功地实现了用O_3和电化学方法对强碱溶液中Cu(II)配合物的氧化，获得了二个新的Cu(III)固态配合物Ba_4K[Cu(H_2TeO_6)_2] (OH)_4·6H_2O和Ba_3K[Cu(HIO_6)_2] (KOH)_(0.5)(OH)_2·8H_2O利用化学分析、磁学性质、电子光谱和Cu2p XPS，对这二个化合物进行了表征。4.对BaCuO_(2.5)的合成、电学性质、磁学性质、Cu(III) ESR和Cu2p XPS进行了研究。5.以Na_4K[Cu(HIO_6)_2]·12H_2O和BaCuO_(2.5)为参照物，用电子光谱和Cu2p XPS，确认了YBa_2Cu_3O_(7-5)中的高价态的铜。6.考察了以Cu（III）化合物作为Cu部分原料所合成的YBCO系超导材料的电学性质。第二部分的主要内容有：1.测试了元件“BiF_3(Bi)/Ce_(0.95)Ca_(0.05)F_(2.95)/Pt”的氧敏、氢敏等性能。从室温到130 ℃，元件的氧敏机理为“双电子反应”，电动势（EMF）与氧分压遵循Nernst关系式。室温时，元件对空气中100Pa或1000Pa氢气的响应时间仅为15秒或短于5秒；氢分压在16Pa～1000Pa范围内，EMF与氢分压的对数呈线性关系，斜率为-116mV/decade, 敏感机理表现为“混合电极电势”。元件具有良好的氢敏性能，并有一定的选择性。2.合成并测试了La_(1-x)Pb_xF_(3-x)(X = 0.00 ～ 0.15)的电导率，La_(0.95)Pb_(0.05)F_(2.95)的电导率最高，比LaF_3高约一个数量级。以La_(0.95)Pb_(0.05)F_(2.95)为固体电解质材料，Pd或Pt为敏感电极，BiF_3(Bi)或PbF_2(Pb)为参比电极，制成了四个元件。其中，“BiF_3(Bi)/La_(0.95)Pb_(0.05)F_(2.95)/Pt”具有最好的氧敏、氢敏性能。从室温到150 ℃，元件的EMF与1gPo_2附合Nernst关系式。150 ℃时，元件对氧气的响应时间仅为80秒。室温下，元件对空气中100Pa或1000Pa氢气的响应时间仅为75秒或15秒，元件的电动势EMF与氢分压的关系可表示为“E=E_o-96lgP_(H2)(mV)”。元件对CO有较差的敏感性能，而对空气中甲烷、乙烷或乙炔（≤1000Pa）不具敏感性能。3.合成并测试了Ln_(1-x)Pb_xF_(3-x)(Ln=Ce、Pr、Nd和Gd、Dy、Ho、Yb)的电性。前四个系列为离子导体材料，后三个系列可能为P型半导体。随着Ln原子序数增大，LnF_3导电性能变差；La~(3+)、Ce~(3+)、Pr~(3+)、Nd~(3+)与Pb~(2+)离子半径差异较小，LnF_3和PbF_2可以形成固溶体；而Gd~(3+)、Dy~(3+)、Ho~(3+)、Yb~(3+)与Pb~(2+)离子半径差异较大，LnF_3和PbF_2难以形成固溶体。

INTERVALLEY-GAMMA-CHI DEFORMATION POTENTIALS IN III-V ZINCBLENDE AND SI SEMICONDUCTORS BY AB-INITIO PSEUDOPOTENTIAL CALCULATIONS

Intervalley GAMMA - X deformation potential constants (IVDP's) have been calculated by first principle pseudopotential method for the III-V zincblende semiconductors AlP, AlAs, AlSb, GaP, GaAs, GaSb, InP, InAs and InSb. As a prototype crystal we have also carried out calculations on Si. When comparing the calculated IVDP's of LA phonon for GaP, InP and InAs and LO phonon for AlAs, AlSb, GaAs, GaSb and InSb with a previous calculation by EPM in rigid approximation, good agreements are found. However, our ab initio pseudopotential results of LA phonon for AlAs, AlSb, GaAs, GaSb and InSb and LO phonon for GaP, InP and InAs are about one order of magnitude smaller than those obtained by EPM calculations, which indicate that the electron redistributions upon the phonon deformations may be important in affecting GAMMA - X intervalley shatterings for these phonon modes when the anions are being displaced. In our calculations the phonon modes of LA and LO at X point have been evaluated in frozen phonon approximation. We have obtained, at the same time, the LAX and LOX phonon frequencies for these materials from total energy calculations. The calculated phonon frequencies agree very well with experimental values for these semiconductors.

GROWTH OF GASB AND GAASSB IN THE SINGLE-PHASE REGION BY MOVPE

GaSb layers are grown on GaSb substrates; the effects of input partial pressure of trimethylantimony and the V/III ratio are studied. A model of the MOVPE phase diagram for the growth of GaSb and GaAsxSb1-x is developed which assumes thermodynamic equilibrium to be established at the solid-vapor interface.

INTERVALLEY GAMMA-CHI DEFORMATION POTENTIALS IN III-V ZINCBLENDE SEMICONDUCTORS BY ABINITIO PSEUDOPOTENTIAL CALCULATIONS

Intervalley GAMMA-X deformation-potential constants (IVDP's) have been calculated by use of a first-principles pseudopotential method for the III-V zinc-blende semiconductors AlP, AlAs, AlSb, GaP, GaAs, GaSb, InP, InAs, and InSb. When the calculated IVDP's of LA phonons for GaP, InP, and InAs and of LO phonons for AlAs, AlSb, GaAs, GaSb, and InSb are compared with results of a previous calculation that used the empirical pseudopotential method (EPM) and a rigid-ion approximation, good agreement is found. However, our ab initio pseudopotential results on IVDP's of LA phonons for AlAs, AlSb, GaAs, GaSb, and InSb and of LO phonons for GaP, InP, and InAs are about one order of magnitude smaller than those obtained by use of EPM calculations, indicating that the electron redistribution accompanying crystal-lattice deformation has a significant effect on GAMMA-X intervalley scattering for these phonon modes when the anions are being displaced. In our calculations the LA- and LO-phonon modes at the X point have been evaluated in the frozen-phonon approximation. We have also obtained the LAX- and LOX-phonon frequencies for these materials from total-energy calculations, which agree very well with experimental values for these semiconductors. We have also calculated GAMMA-X hole-phonon scattering matrix elements for the top valence bands in these nine semiconductors, from which the GAMMA-X IVDP's of the top valence bands for the longitudinal phonons and transverse phonons are evaluated, respectively.

1ST PRINCIPLES PSEUDOPOTENTIAL CALCULATIONS OF ZONE BOUNDARY PHONON FREQUENCIES OF III-V-ZINCBLENDE SEMICONDUCTORS

Longitudinal zone boundary X phonon frequencies have been calculated by a first principles pseudopotential method for III-V zincblende semiconductors AlP, AlAs, AlSb, GaP, GaAs, GaSb, InP, InAs and InSb. The phonon frequencies have been evaluated from total energy calculations in the frozen phonon approximation. The calculated phonon frequencies agree very well with the experimental values.

不同状态MnO2对废水中As（III）的吸附研究

于2010-11-23批量导入

YAlO3：（Nd^3＋,Lu^3＋）单晶的各向异性吸收光谱

于2010-11-23批量导入

MOCVD growth of high quality crack-free GaN on Si(III) substrates

High quality crack free GaN epilayers were grown on Si(111) substrates. Low temperature AlN interlayer grown under low V/III ratio was used to effectively eliminate the formation of micro-cracks. It is found that tensile stress in the GaN epilayer decreases as the N/Al ratio decreases used for AlN interlayer growth. The high optical and structural qualities of the GaN/Si samples were characterized by RBS, PL and XRD measurements. The RT-PL FWHM of the band edge emission is only 39.5meV The XRD FWHM of the GaN/Si sample is 8.2arcmin, which is among the best values ever reported.

Effects of polarization field on formation of two-dimensional electron gas in (0001) and (11(2)over-bar0) plane AlGaN/GaN heterostructures

Photoluminescence (PL) and temperature-dependent Hall effect measurements were carried out in (0001) and (11 (2) over bar0) AlGaN/GaN heterostructures grown on sapphire substrates by metalorganic chemical vapor deposition. There are strong spontaneous and piezoelectric electric fields (SPF) along the growth orientation of the (0001) AlGaN/GaN heterostructures. At the same time there are no corresponding SPF along that of the (1120) AlGaN/GaN. A strong PL peak related to the recombination between two-dimensional electron gas (2DEG) and photoexcited holes was observed at 3.258 eV at room temperature in (0001) AlGaN/GaN heterointerfaces while no corresponding PL peak was observed in (11 (2) over bar0). The existence of a 2DEG was observed in (0001) AlGaN/GaN multi-layers with a mobility saturated at 6000 cm(2)/V s below 80 K, whereas a much lower mobility was measured in (11 (2) over bar0). These results indicated that the SPF was the main element to cause the high mobility and high sheet-electron-density 2DEG in AlGaN/GaN heterostructures. (C) 2004 Elsevier B.V. All rights reserved.

Visible vertical cavity surface emitting laser

We have designed and fabricated the visible vertical-cavity surface-emitting lasers (VCSEL's) by using metalorganic vapor phase epitaxy (MOVPE). We use the 8 lambda optical cavities with 3 quantum wells in AlGaInP/AlGaAs red VCSEL's to reduce the drift leakage current and enhance the model gain in AlGaInP active region. The structure has a p-type stack with 36 DBR pairs on the top and an n-type with 55-1/2 pairs on the bottom. Using micro-area reflectance spectrum, we try to get a better concordance between the center wavelength of DBR and the emitting wavelength of the active region. We used a component graded layer of 0.05 lambda thick (x = 0.5 similar to 0.9) at the p-type DBR AlGaAs/AlAs interface to reduce the resistance of p-type DBR. We use selective oxidation to define the current injection path. Because the oxidation rate of a thick layer is faster than a thinner one, we grown a thick AlAs layer close to the active region. In this way, we got a smaller active region for efficient confinement of injected carriers (the aperture area is 3 x 3 mu m) to reduce the threshold and, at the same time, a bigger conductive area in the DBR layers to reduce the resistance. We employ Zn doping on the p-side of the junction to improve hole injection and control the Zn dopant diffusion to get proper p-i-n junction. At room temperature, pulse operation of the laser has been achieved with the low threshold current of 0.8mA; the wavelength is about 670nm.