氮化镓基蓝、绿光LED中游工艺技术产业化研究

氮化镓基蓝、绿光LED在光显示及未来的白光照明领域具有广阔的应用前景，中国科学院半导体研究所和深圳市方大国科光电技术公司利用双方各自的技术优势和资金管理优势，实现了氮化镓基蓝、绿光LED中游工艺技术产业化，目前产品已经批量上市销售。

MOVPE生长的GaN基蓝色与绿色LED

报道用自行研制的LP-MOVPE设备,在蓝宝石(α-Al_2O_3)衬底上生长出以InGaN为有源区的蓝光和绿光InGaN/AlGaN双异质结构以及InGaN/GaN量子阱结构的LED,其发射波长分别为430～450nm和520～540nm。

MOVPE生长InGaN/GaN单量子阱绿光LED

于2010-11-23批量导入

GaN的MOVPE生长和m-i-n型蓝光LED的试制

国家863计划

MOVPE growth of GaN and LED on (111) MgAl2O4

The growth of wurtzite GaN by low-pressure metalorganic vapor-phase epitaxy on (1 1 1) magnesium aluminate (MgAl2O4) substrates have been studied. The morphological, crystalline, electrical and optical properties are investigated. A p-n junction GaN LED was fabricated on the MgAl2O4 substrate. (C) 1998 Elsevier Science B.V. All rights reserved.

AlGaInP LED with surface structure of two-dimensional photonic crystal

Some progress in the research of GaN based LED with photonic crystal structure has been made recently. Based on the photonic crystal's photonic band gap effect and photon grating diffraction principle, the extraction efficiency of LED with photonic crystal can be improved. In this paper, the restriction on AlGaInP LED's extraction efficiency is analyzed, and the photonic crystal is introduced in to the AlGaInP LED to improve the extraction efficiency. The theoretical analyses and the experiment results show that the output luminous intensity of LED with photonic crystal is improved by 16%, which results from some effect of the GaN based LED with photonic crystal.

高速、大功率LED光源驱动电路设计

高速、大功率LED(≥3W)光源驱动电路是中子墙探测器光刻度系统的重要组成部分。本文简要介绍高速、大功率LED光源驱动电路的设计。该电路具有稳定性好、驱动脉冲前、后沿快,大电流脉冲输出等特点。内置信号源信号经过成形电路后,形成具有一定脉宽的快脉冲信号作为驱动信号,驱动信号上升时间tr<10 ns,下降时间tf<10 ns,其脉冲宽度分5档可调。该脉冲信号通过驱动电路控制输出电流开关,最大输出脉冲电流为800 mA,控制LED在额定功率下工作。该驱动电路最多可同时驱动六个大功率LED光源工作,目前已用于我所中子墙探测器阵列探测单元的初步刻度与测试。

基于大功率LED的中子墙光刻度系统

光刻度系统是中子墙探测器系统的重要组成部分,用于中子墙前端电子学的刻度和探测器工作性能变化的监测．通过对基于发光二极管(LED)作为光源的中子墙光刻度系统方案开展了细致的测试研究,确定了基于快脉冲驱动的大功率蓝光LED(3W)的中子墙光刻度系统方案,对中子墙探测单元进行了初步刻度测试,刻度结果能很好地满足光刻度要求,表明对于快塑料闪烁体探测器该方案是一种较为理想的方案．

Study of the LED based light calibration system for neutron wall detector

The light calibration system is one of the key components of Neutron Wall detector. It is used to calibrate the electronics and to monitor the long-term stability of the detector modules. With the detaile investigations, a calibration system with high-power LED (3W) driven by the fast pulses has been carried out. It is also tested together with the detector module of the Neutron Wall and the result of the preliminary calibration demonstrates that it fulfills the needs. It's a new design proposal to the light calibration system of the fast scintillator detector.

Control led/living free-radical copolymerization of 4-(azidocarbonyl) phenyl methacrylate with methyl acrylate under Co-60 gamma-ray irradiation

A new vinyl acyl azide monomer, 4-(azidocarbonyl) phenyl methacrylate, has been synthesized and characterized by NMR and FTIR spectroscopy. The thermal stability of the new monomer has been investigated with FTIR and thermal gravimetry/differential thermal analysis (TG/DTA), and the monomer has been demonstrated to be stable below 50 degrees C in the solid state. The copolymerizations of the new monomer with methyl acrylate have been carried out at room temperature under Co-60 gamma-ray irradiation in the presence of benzyl 1-H-imidazole-1-carbodithioate. The results show that the polymerizations bear all the characteristics of controlled/living free-radical polymerizations, such as the molecular weight increasing linearly with the monomer conversion, the molecular weight distribution being narrow (< 1.20), and a linear relationship existing between In([M](0)/[M]) and the polymerization time. The data from H-1 NMR and FTIR confirm that no change in the acyl azide groups has occurred in the polymerization process and that acyl azide copolymers have been obtained. The thermal stability of the polymers has also been investigated with TG/DTA and FTIR.

Intel 8279芯片在8位和16位米字LED显示电路中的应用

本文简要介绍了16段米字LED字符管的动态扫描，以及通用显示和键盘接口器件Intel8279芯片的显示接口结构和功能，讨论了通过一定的附加电路来扩展Intel8279的显示功能，使之控制8位和16位的米字LED字符管的动态显示，并结合两种具体的硬件电路和程序，说明了两种方案的实现方法和工作原理。