Modelling the resistance of Enterprise Architecture adoption: linking strategic level of Enterprise Architecture to organisational changes and change resistance

During the last few years Enterprise Architecture (EA) has received increasing attention among industry and academia. By adopting EA, organisations may gain a number of benefits such as better decision making,increased revenues and cost reduction, and alignment of business and IT. However, EA adoption has been found to be difficult. In this paper a model to explain resistance during EA adoption process (REAP) is introduced and validated. The model reveals relationships between strategic level of EA, resulting organisational changes, and sources of resistance. By utilising REAP model, organisations may anticipate and prepare for the organisational change resistance during EA adoption.

Relational architecture and relational capability: organisational levers to support strategic supplier relationships

The resource based view of strategy suggests that competitiveness in part derives from a firms ability to collaborate with a subset of its supply network to co-create highly valued products and services. This relational capability relies on a foundational intra and inter-organisational architecture, the manifestation of strategic, people, and process decisions facilitating the interface between the firm and its strategic suppliers. Using covariance-based structural equation modelling we examine the relationships between internal and external features of relational architecture, and their relationship with relational capability and relational quality. This is undertaken on data collected by mail survey. We find significant relationships between both internal and external relational architecture and relational capability and between relational capability and relational quality. Novel constructs for internal and external elements of relational architecture are specified to demonstrate their positive influence on relational capability and relationship quality.

Defense Finance and Accounting Service : accounting systems strategic plan for the Department of Defense : target architecture.

Shipping list no.: 97-0197-P.

Decision support system architecture for consultant selection

Decision Support System (DSS) has played a significant role in construction project management. This has been proven that a lot of DSS systems have been implemented throughout the whole construction project life cycle. However, most research only concentrated in model development and left few fundamental aspects in Information System development. As a result, the output of researches are complicated to be adopted by lay person particularly those whom come from a non-technical background. Hence, a DSS should hide the abstraction and complexity of DSS models by providing a more useful system which incorporated user oriented system. To demonstrate a desirable architecture of DSS particularly in public sector planning, we aim to propose a generic DSS framework for consultant selection. It will focus on the engagement of engineering consultant for irrigation and drainage infrastructure. The DSS framework comprise from operational decision to strategic decision level. The expected result of the research will provide a robust framework of DSS for consultant selection. In addition, the paper also discussed other issues that related to the existing DSS framework by integrating enabling technologies from computing. This paper is based on the preliminary case study conducted via literature review and archival documents at Department of Irrigation and Drainage (DID) Malaysia. The paper will directly affect to the enhancement of consultant pre-qualification assessment and selection tools. By the introduction of DSS in this area, the selection process will be more efficient in time, intuitively aided qualitative judgment, and transparent decision through aggregation of decision among stakeholders.

Applying Enterprise Architecture to Business Networks

Globalization, financial deregulation, economic turmoil, and technology breakthroughs are profoundly exposing organizations to business networks. Engaging these networks requires explicit planning from the strategic level down to the operational level of an organization, which significantly affects organizational artefacts such as business services, processes, and resources. Although enterprise architecture (EA) aligns business and IT aspects of organizational systems, previous applications of EA have not comprehensively addressed a methodological framework for planning. In the context of business networks, this study seeks to explore the application of EA for business network planning where it builds upon relevant and well-established prescriptive and descriptive aspects of EA. Prescriptive aspects include integrated models of services, business processes, and resources among other organizational artefacts, at both business and IT levels. Descriptive aspects include ontological classifications of business functionality, which allow EA models to be aligned semantically to organizational artefacts and, ultimately higher-level business strategy. A prominent approach for capturing descriptive aspects of EA is business capability modelling. In order to explore and develop the illustrative extensions of EA through capability modelling, a list of requirements (capability dimensions) for business network planning will be identified and validated through a revelatory case study encompassing different business network manifestations, or situations. These include virtual organization, liquid workforce, business network orchestration, and headquarters-subsidiary. The use of artefacts, conventionally, modelled through EA will be considered in these network situations. Two general considerations for EA extensions are explored for the identified requirements at the level of the network: extension of artefacts through the network and alignment of network level artefacts with individual organization artefacts. The list of requirements provides the basis for a constructivist extension of EA in the following ways. Firstly, for descriptive aspects, it offers constructivist insights to guide extensions for particular EA techniques and concepts. Secondly, for prescriptive aspects it defines a set of capability dimensions, which improve the analysis and assessment of organization capabilities for business network situations.

Dynamics of industry architecture and firm’s capability development : role of knowledge integration within product innovation

Aligned with the decline of Marshalian view of industry as constituting homogeneous set of firms, the new perspective is emerging by concentrating more on dynamics of sectors as the building block of industrial changes. Based on new assumptions, much of the action in terms of strategy, technology, and knowledge development does not happen either among firms within a stable industry, or through the growth or decline of certain sectors compared to others. Instead, the action happens in terms of the definition, redefinition, drawing, and redrawing of the very nature of these sectors. Technology does not progress and develop within a sector; rather it shapes (and is shaped by) the encompassing architecture of multiple sectors.

The shifting value of design in the Australian Architecture Industry

Architects regularly employ design as a problem-solving tool in the built environment. Within the design process, architects apply design thinking to reframe problems as opportunities, take advantage of contradictory information to develop new solutions, and differentiate outcomes based on context. This research aims to investigate how design can be better positioned to develop greater differentiated value to an architect’s current service offering, and how design as a strategy could be applied as a driver of business innovation within the Australian architecture industry. The research will explore literature relating to the future of architecture, the application of design thinking, and the benefits of strategic design. The future intent of the research is to develop strategies that improve the value offering of architects, and develop design led solutions that could be applied successfully to the business of architecture.

Resting sites, edge effects and dispersion of a polyphagous Bactrocera fruit fly within crops of different architecture

The spot or strip application of poisoned protein bait is a lure-and-kill technique used for the management of fruit flies. Knowledge of where flies occur in the crop environment is an important part of maximizing the efficacy of this tool. Bactrocera tryoni is a polyphagous pest of horticulture for which very little is known about its distribution within crops. With particular reference to edge effects, we monitored the abundance of B. tryoni in two crops of different architecture; strawberry and apple. In strawberries, we found more flies on the crop edge early in the fruiting season, which lessened gradually and eventually disappeared as the season progressed. In apple orchards, no such edge effect was observed and flies were found equally throughout the orchard. We postulated these differences may be due to differences in crop height (high vs. short) and/or crop canopy architecture (opened and branched in apple, dense and closed in strawberry). In a field cage trial, we tested these predictions using artificial plants of different height and canopy condition. Height and canopy structure type had no significant effects on fly oviposition and protein feeding, but the ‘apple’ type canopy significantly influenced resting. We thus postulate that there was an edge effect in strawberry because the crop was not providing resting sites and flies were doing so in vegetation around the field margins. The finding that B. tryoni shows different resting site preferences based on plant architecture offers the potential for strategic manipulation of the fly through specific border or inter-row plantings.

Resting sites, edge effects and dispersion of a polyphagous Bactrocera fruit fly within crops of different architecture

The spot or strip application of poisoned protein bait is a lure-and-kill technique used for the management of fruit flies. Knowledge of where flies occur in the crop environment is an important part of maximizing the efficacy of this tool. Bactrocera tryoni is a polyphagous pest of horticulture for which very little is known about its distribution within crops. With particular reference to edge effects, we monitored the abundance of B. tryoni in two crops of different architecture; strawberry and apple. In strawberries, we found more flies on the crop edge early in the fruiting season, which lessened gradually and eventually disappeared as the season progressed. In apple orchards, no such edge effect was observed and flies were found equally throughout the orchard. We postulated these differences may be due to differences in crop height (high vs. short) and/or crop canopy architecture (opened and branched in apple, dense and closed in strawberry). In a field cage trial, we tested these predictions using artificial plants of different height and canopy condition. Height and canopy structure type had no significant effects on fly oviposition and protein feeding, but the 'apple' type canopy significantly influenced resting. We thus postulate that there was an edge effect in strawberry because the crop was not providing resting sites and flies were doing so in vegetation around the field margins. The finding that B. tryoni shows different resting site preferences based on plant architecture offers the potential for strategic manipulation of the fly through specific border or inter-row plantings. © 2013 Blackwell Verlag GmbH.

Strategic Soft Human Resource Management - The Very Idea

On the one hand this thesis attempts to develop and empirically test an ethically defensible theorization of the relationship between human resource management (HRM) and competitive advantage. The specific empirical evidence indicates that at least part of HRM's causal influence on employee performance may operate indirectly through a social architecture and then through psychological empowerment. However, in particular the evidence concerning a potential influence of HRM on organizational performance seems to put in question some of the rhetorics within the HRM research community. On the other hand, the thesis tries to explicate and defend a certain attitude towards the philosophically oriented debates within organization science. This involves suggestions as to how we should understand meaning, reference, truth, justification and knowledge. In this understanding it is not fruitful to see either the problems or the solutions to the problems of empirical social science as fundamentally philosophical ones. It is argued that the notorious problems of social science, in this thesis exemplified by research on HRM, can be seen as related to dynamic complexity in combination with both the ethical and pragmatic difficulty of ”laboratory-like-experiments”. Solutions … can only be sought by informed trials and errors depending on the perceived familiarity with the object(s) of research. The odds are against anybody who hopes for clearly adequate social scientific answers to more complex questions. Social science is in particular unlikely to arrive at largely accepted knowledge of the kind ”if we do this, then that will happen”, or even ”if we do this, then that is likely to happen”. One of the problems probably facing most of the social scientific research communities is to specify and agree upon the ”this ” and the ”that” and provide convincing evidence of how they are (causally) related. On most more complex questions the role of social science seems largely to remain that of contributing to a (critical) conversation, rather than to arrive at more generally accepted knowledge. This is ultimately what is both argued and, in a sense, demonstrated using research on the relationship between HRM and organizational performance as an example.

Transformation or bureaucratisation?: the changing role of community representation in local strategic partnerships in England

The debate about the need to build social capital and to engage local communities in public policy has become a central issue in many advanced liberal societies and developing countries. In many countries new forms of governance have emerged out of a growing realisation that representative democracy by itself is no longer sufficient. One of the most significant public policy trends in the UK has been the involvement of community organisations and their members in the delivery of national policy, mediated through local systems of governance and management. One such policy area is urban regeneration. Central government now requires local authorities in England to set up Local Strategic Partnerships (LSPs) to bring together stakeholders who can prepare Community Strategies and deliver social and economic programmes which target areas of deprivation. This paper reviews the key institutional processes which must be addressed, such as representation, accountability and transformation.

Local strategic partnerships in England: the continuing search for collaborative advantage, leadership and strategy in urban governance

Local Strategic Partnerships are being established in England to provide an inclusive, collaborative and strategic focus to regeneration strategies at the local level. They are also required to rationalise the proliferation of local and micro-partnerships set up by a succession of funding initiatives over the last 25 years. This article explores their remit, resources and membership and discusses how this initiative relates to theoretical work on urban governance, community engagement and leadership. It concludes by debating whether urban policy in England is now entering a new and more advanced phase based on inter-organisational networks with a strategic purpose. But questions remain about whether the institutional capacity is sufficient to deliver strong local leadership, accountability and community engagement.