Grain Storage Costs and Rental Rates

Trends in Grain Storage - Commercial grain storage eliminates the need to monitor grain conditions and, hence, offers the peace of mind that unsold grain will remain in condition. There may be a cost trade-off between this reduced storage risk and the cost of on-farm storage.

RP92-217 No. 19 Cost of Grain Storage

Grain marketing decisions are among the toughest the farm owner/operator or manager must make. Grain producers store grain to speculate on receiving higher prices, earn a return above storage costs, or to take advantage of government programs. Prices must increase enough to cover the additional costs, or forward contract prices must exceed current prices by more than the cost of storage in order to justify forward pricing. The gain in prices received can come from both changes in price level and changes in basis. This research publication discusses all the areas of the cost of grain storage.

Accuracy and cost- and time-effectiveness of digital clip versus videotape interpretation of echocardiograms in patients with valvular disease

Background. Although digital and videotaped images are known to be comparable for the evaluation of left ventricular function, their relative accuracy for assessment of more complex anatomy is unclear. We sought to compare reading time, storage costs, and concordance of video and digital interpretations across multiple observers and sites. Methods. One hundred one patients with valvular (90 mitral, 48 aortic, 80 tricuspid) disease were selected prospectively, and studies were stored according to video and standardized digital protocols. The same reviewer interpreted video and digital images independently and at different times with the use of a standard report form to evaluate 40 items (eg, severity of stenosis or regurgitation, leaflet thickening, and calcification) as normal or mildly, moderately, or severely abnormal Concordance between modalities was expressed at kappa Major discordance (difference of >1 level of severity) was ascribed to the modality that gave the lesser severity. CD-ROM was used to store digital data (20:1 lossy compression), and super-VHS video-tape was used to store video data The reading time and storage costs for each modality were compared Results. Measured parameters were highly concordant (ejection fraction was 52% +/- 13% by both). Major discordance was rare, and lesser values were reported with digital rather than video interpretation in the categories of aortic and mitral valve thicken ing (1% to 2%) and severity of mitral regurgitation (2%). Digital reading time was 6.8 +/- 2.4 minutes, 38% shorter than with video (11.0 +/- 3.0, range 8 to 22 minutes, P < .001). Compressed digital studies had an average size of 60 <plus/minus> 14 megabytes (range 26 to 96 megabytes). Storage cost for video was A$0.62 per patient (18 studies per tape, total cost A$11.20), compared with A$0.31 per patient for digital storage (8 studies per CD-ROM, total cost A$2.50). Conclusion. Digital and video interpretation were highly concordant; in the few cases of major discordance, the digital scores were lower, perhaps reflecting undersampling. Use of additional views and longer clips may be indicated to minimize discordance with video in patients with complex problems. Digital interpretation offers a significant reduction in reading times and the cost of archiving.

Oman varastoinnin ja toimittajavarastoinnin vertailu - Case teollisuusyritys

Työn tavoitteena oli selvittää, kumpi kahdesta varastointitavasta, oma varastointi vai toimittajavarastointi, on tutkimuksen toimeksiantajayrityksen kannalta edullisempi vaihtoehto varastoida kunnossapidon varaosia. Tarkoituksena oli selvittää case-yrityksen oman varastoinnin aiheuttamat kustannukset ja verrata niitä toimittajavarastoinnin kustannuksiin. Varastointikustannuksia tarkasteltiin tutkimukseen valittujen varaosanimikkeiden avulla. Kyseessä oli kvalitatiivinen tutkimus, jossa aineistonkeruumenetelminä käytettiin haastatteluja ja erilaisia valmiita dokumentteja. Työn teoriaosassa käsiteltiin varastointia, varastoinnin ulkoistamista, toimittajavarastointia sekä varastoinnista aiheutuneita kustannuksia. Teoriaosa pohjautui aikaisempiin tutkimuksiin ja alan kirjallisuuteen. Empiirisessä osassa perehdyttiin tutkimuksen toimeksiantajayrityksen varaosien varastointiin sekä selvitettiin tarkasteluun valittujen varaosanimikkeiden osalta varastoinnista aiheutuneet kustannukset. Tutkimuksen tulosten pohjalta tehtiin taulukkolaskentaohjelmalla niin kutsuttu simulointimalli, jonka avulla tutkimuksen varastointikustannuksiin liittyviä laskelmia voidaan käyttää hyväksi myös case-yrityksen muiden varaosanimikkeiden kohdalla. Malli tarjoaa yksinkertaisen tavan kohdistaa varastointikustannuksia varaosanimikkeille. Mallin avulla on siis mahdollista saada suuntaa-antaviavastauksia oman varastoinnin ja toimittajavarastoinnin kannattavuuden vertailussa.

Vaihto-omaisuuden merkitysja hallinta tukkukaupassa

Tutkielman päätavoitteena on tutkia vaihto-omaisuuden merkitystä ja hallintaa tukkukaupassa. Tutkielman alatavoitteena on selvittää ostotoiminnan arvostusta yrityksessä sekä myynti- ja ostotoimintojen yhteistyötä. Yrityksen toiminnanohjausjärjestelmien hyödyntäminen vaihto-omaisuuden hallinnassa ja tiedon välittäjänä on toinen tutkielman alatavoitteista. Tutkielmassa haetaan myös vastauksia myynnin ostotoiminnoille esittämään kysymykseen: miksi yrityksessä ei voida pitää reilusti tavaraa varastossa. Tutkimus on tyypiltään kvalitatiivinen ja metodologialtaan tapaustutkimus. Tutkimusmenettelynä on käytetty teoriaa, havainnointia sekä case-yrityksen ja case-tuotesarjan tutkimusta. Tutkimuksen tulosten mukaan ostotoimintojen asema tukkukaupassa on saanut suuremman merkityksen kiristyvän kilpailun vuoksi. Kilpailutilanteessa yritykset pyrkivät tehokkaaseen kustannuksien ja käyttöpääoman hallintaan ja sitä kautta parantamaan tulostaan. Vaihto-omaisuuden hallinnassa tämä tarkoittaa tehokkaasti ostettuja ja hinnaltaan kilpailukykyisiä tuotteita ja varastointikulujen minimoimista. Lisäksi myynti- ja ostotoimintojen yhteistyön kehittäminen on ensiarvoisen tärkeää.

Kunnossapitoyrityksen materiaalitoimintojen kehittäminen

ABB Service Oy:n Itä-Suomen alue on maantieteellisesti laaja, toimipisteitä on useita ja ne ovat asiakasyritysten kunnossapidon ulkoistamisen myötä siirtyneet ABB Service Oy:n vastuulle. Samalla asiakasyrityksen kunnossapitohenkilöstö on myös pääosin siirtynyt ABB Service Oy:n palvelukseen, tästä johtuen toimipisteiden toimintatavat eroavat toisistaan.Työn tavoitteena oli ABB Service Oy:n Itä-Suomen alueella sijaitsevien yhdeksän toimipisteen nykytilakartoituksen perusteella analysoida mahdollisuuksia materiaalitoimintojen sekä toimintatapojen yhtenäistämiseen. Lisäksi tavoitteena oli luoda malli, jonka avulla yksittäisen toimipisteen kehitystarpeita voidaan analysoida. Toimipistekohtainen toimintojen kehittäminen suoritettiin Lappeenrannan, Outokummun ja Kaavin toimipisteissä.Toimenpide-ehdotuksena esitetään materiaalitoiminnoista vastaavien kouluttamista, toimittajayhteistyön tiivistämistä, huomion kiinnittämistä ostokäytäntöihin sekä yhteisten tunnuslukujen käyttöönottamista ja säännöllistä seurantaa. Toimipistekohtaisesti varastojen abc-analyysien suorittaminen, varaosien kriittisyysluokitus sekä tulevan tarpeen ennakointi havaittiin tärkeimmäksi varastointikustannuksia alentavaksi toimenpiteeksi.

Toimittajavarastointi teollisuusyrityksen kilpailuetuna sekä sen aiheuttamien kustannusten tarkastelu

Työn tavoitteena on tutkia toimittajavarastointia sekä siitä aiheutuvia kus-tannuksia. Työssä perehdytään tarkemmin toimitusketjun eri osapuolien väliseen yhteistyömalliin sekä tarkastellaan varastoinnin aiheuttamia kus-tannuksia yleisellä tasolla, sekä toimittajavarastointimallin mukanaan tuo-mien erillisten kustannuserien käsittelyä. Lisäksi tutkitaan, miten toimitta-javarastointimalli tuo lisähyötyä toimittajan toimintaan kilpailijoihin nähden. Tutkimus sisältää teoriaosuuden ja empiirisen osuuden, joissa esitellään aiheeseen liittyviä lainalaisuuksia ja erään teollisuusyrityksen toimittajavarastointia kahden esimerkkiasiakkaan kesken, sekä näiden asiakkaiden toimittajavarastoinnista esimerkkiyritykselle aiheutuvia kustannuksia. Teoriaosuudessa selvitetään toimittajavarastointiin liittyviä teoreettisia lähtökohtia ja sen vaikutuksia yritysten toimintaan. Kyseessä on kvalitatiivinen tapaustutkimus, jossa empiirinen aineisto ke-rättiin havainnoinnin, haastattelujen ja valmiiden dokumenttien perusteella sekä esimerkkiyrityksen tietokannoista. Teoriaosuuden lähteenä käytettiin aikaisempaa alan kirjallisuutta sekä artikkeleita. Tuloksena esitetään kustannusten laskentamalli, jonka avulla voidaan selvittää toimittajavarastoinnista aiheutuvat kustannukset ja niiden ositusperusteet.

Apply of energy storages in electricity distribution networks and reserve capacity applications

The Thesis is dedicated to development of an operative tool to support decision making of battery energy storages implementation in distribution networks. The basics of various battery technologies, their perspectives and challenges are represented in the Thesis. Mathematical equations that describe economic effect from battery energy storage installation are offered. The main factors that influence profitability of battery settings have been explored and mathematically defined. Mathematical model and principal trends of battery storage profitability under an impact of the major factors are determined. The meaning of annual net value was introduced to show the difference between savings and required costs. The model gives a clear vision for dependencies between annual net value and main factors. Proposals for optimal network and battery characteristics are suggested.

A linear optimization approach to the combined production planning model

Two fundamental processes usually arise in the production planning of many industries. The first one consists of deciding how many final products of each type have to be produced in each period of a planning horizon, the well-known lot sizing problem. The other process consists of cutting raw materials in stock in order to produce smaller parts used in the assembly of final products, the well-studied cutting stock problem. In this paper the decision variables of these two problems are dependent of each other in order to obtain a global optimum solution. Setups that are typically present in lot sizing problems are relaxed together with integer frequencies of cutting patterns in the cutting problem. Therefore, a large scale linear optimizations problem arises, which is exactly solved by a column generated technique. It is worth noting that this new combined problem still takes the trade-off between storage costs (for final products and the parts) and trim losses (in the cutting process). We present some sets of computational tests, analyzed over three different scenarios. These results show that, by combining the problems and using an exact method, it is possible to obtain significant gains when compared to the usual industrial practice, which solve them in sequence. (C) 2010 The Franklin Institute. Published by Elsevier Ltd. All rights reserved.

Extracting Causal Graphs from an Open Provenance Data Model

The open provenance architecture (OPA) approach to the challenge was distinct in several regards. In particular, it is based on an open, well-defined data model and architecture, allowing different components of the challenge workflow to independently record documentation, and for the workflow to be executed in any environment. Another noticeable feature is that we distinguish between the data recorded about what has occurred, emphprocess documentation, and the emphprovenance of a data item, which is all that caused the data item to be as it is and is obtained as the result of a query over process documentation. This distinction allows us to tailor the system to separately best address the requirements of recording and querying documentation. Other notable features include the explicit recording of causal relationships between both events and data items, an interaction-based world model, intensional definition of data items in queries rather than relying on explicit naming mechanisms, and emphstyling of documentation to support non-functional application requirements such as reducing storage costs or ensuring privacy of data. In this paper we describe how each of these features aid us in answering the challenge provenance queries.

Jambolão (Syzygium cumini) desidratado por liofilização e secagem em leito de jorro: avaliação do impacto do processo de secagem e caracterização do potencial funcional do produto final

Tropical fruits have been extensively studied due to their functional potential attributed to the presence of natural bioactive compounds. The exotic fruit jambolan (Syzygium cumini) has been reported for its appreciable amount of phenolic compounds, especially anthocyanins and antioxidant capacity. Nevertheless, there are hardly any derived jambolan products in the Brazilian market. In addition to that, considerable volumes of fruit are lost due to their high perishability. Dried fruits have become an important fruit market segment due to its weight and volume reduction and decreased transportation and storage costs. Thus, this study evaluated the jambolan pulp submitted to spouted bed drying (JLJ) and lyophilization (JLI), besides assessing the drying impact on the final product. In order to achieve this, the process performance was calculated and compared, as well the physicochemical and bioactive characteristics (moisture, water activity (aw), solubility, hygroscopicity, density, color, structure through images obtained by scanning electron microscopy (SEM), concentration of bioactive (total phenolic compounds (TPC), anthocyanins, proanthocyanidins and ascorbic acid) and antioxidant activity. The results showed drying efficiency higher than 60% for both products and that JLJ group showed higher moisture and water activity when compared to the JLI group (p<0.05). The two types of drying were able to produce stable final product in the microbiological point of view, given that both showed aw < 0.6. The final products exhibited high solubility (73.7 to 81.6%) and low hygroscopicity (9.8 to 11.6%), desirable characteristics for dehydrated foods. Despite the losses caused by drying, the dried jambolan pulp by both methods showed high TPC (468.6 to 534.0 mg GAE/100g dm), anthocyanins (from 491.9 to 673.4 mg. eq. cyanidin-3-glicoside/100g dm), proanthocyanidins (66.9 to 76.6 mg QTE/g dm) and ascorbic acid (156.4 to 186.8 mg/100 g dm). Taken together, the results of this study reveal spouted dried and freeze dried jambolan pulp as bioactive-rich natural products with suitable physicochemical and functional characteristics to be used as food ingredients. The data also demonstrate the drying techniques as rational strategies for the exploitation of the exotic fruit jambolan

A linear optimization approach to the combined production planning model

Two fundamental processes usually arise in the production planning of many industries. The first one consists of deciding how many final products of each type have to be produced in each period of a planning horizon, the well-known lot sizing problem. The other process consists of cutting raw materials in stock in order to produce smaller parts used in the assembly of final products, the well-studied cutting stock problem. In this paper the decision variables of these two problems are dependent of each other in order to obtain a global optimum solution. Setups that are typically present in lot sizing problems are relaxed together with integer frequencies of cutting patterns in the cutting problem. Therefore, a large scale linear optimizations problem arises, which is exactly solved by a column generated technique. It is worth noting that this new combined problem still takes the trade-off between storage costs (for final products and the parts) and trim losses (in the cutting process). We present some sets of computational tests, analyzed over three different scenarios. These results show that, by combining the problems and using an exact method, it is possible to obtain significant gains when compared to the usual industrial practice, which solve them in sequence. (C) 2010 The Franklin Institute. Published by Elsevier Ltd. All rights reserved.

Proposta de um modelo matemático para apoio às decisões táticas da gestão da produção

Pós-graduação em Engenharia Mecânica - FEG

Nature-Inspired Framework for Hyperspectral Band Selection

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Construção de um sistema de gestão de materiais - MRP - Integrado ao Jogo de Empresas Mercado Virtual

Pós-graduação em Engenharia de Produção - FEB