Measurement of the magnetic field of small magnets with a smartphone: a very economical laboratory practice for introductory physics courses

In this work, we propose an inexpensive laboratory practice for an introductory physics course laboratory for any grade of science and engineering study. This practice was very well received by our students, where a smartphone (iOS, Android, or Windows) is used together with mini magnets (similar to those used on refrigerator doors), a 20 cm long school rule, a paper, and a free application (app) that needs to be downloaded and installed that measures magnetic fields using the smartphone's magnetic field sensor or magnetometer. The apps we have used are: Magnetometer (iOS), Magnetometer Metal Detector, and Physics Toolbox Magnetometer (Android). Nothing else is needed. Cost of this practice: free. The main purpose of the practice is that students determine the dependence of the component x of the magnetic field produced by different magnets (including ring magnets and sphere magnets). We obtained that the dependency of the magnetic field with the distance is of the form x-3, in total agreement with the theoretical analysis. The secondary objective is to apply the technique of least squares fit to obtain this exponent and the magnetic moment of the magnets, with the corresponding absolute error.

Modeling instruction: Positive attitudinal shifts in introductory physics measured with CLASS

Among the most surprising findings in Physics Education Research is the lack of positive results on attitudinal measures, such as Colorado Learning Attitudes about Science Survey (CLASS) and Maryland Physics Expectations Survey (MPEX). The uniformity with which physics teaching manages to negatively shift attitudes toward physics learning is striking. Strategies which have been shown to improve conceptual learning, such as interactive engagement and studio-format classes, provide more authentic science experiences for students; yet do not seem to be sufficient to produce positive attitudinal results. Florida International University’s Physics Education Research Group has implemented Modeling Instruction in University Physics classes as part of an overall effort toward building a research and learning community. Modeling Instruction is explicitly designed to engage students in scientific practices that include model building, validation, and revision. Results from a preinstruction/postinstruction CLASS measurement show attitudinal improvements through both semesters of an introductory physics sequence, as well as over the entire two-course sequence. In this Brief Report, we report positive shifts from the CLASS in one section of a modeling-based introductory physics sequence, for both mechanics (N=22) and electricity and magnetism (N=23). Using the CLASS results and follow up interviews, we examine how these results reflect on modeling instruction and the unique student community and population at FIU.

International human resource management in the introductory HRM course

This paper explores the extent to which students in the introductory HRM course in US institutions are likely to be exposed to information on international and cross-cultural aspects of HRM. Two methods are used: (1) an analysis of international content in fifteen popular introductory HRM textbooks and (2) a survey of professors teaching introductory HRM. The vast majority of responding instructors said their classes got some exposure to international issues in HRM, and most introductory texts included some relevant content. Critiques of international boxed features and dedicated IHRM chapters are provided, and suggestions for improving the quality and depth of IHRM content in introductory textbooks are made.

The ‘Get Marketer Challenge’: Engaging first year students in an introductory marketing course

Research on student engagement suggests courses that involve students in challenging, authentic tasks linking students to their peers and educators are associated with high levels of engagement. This paper presents an assessment innovation within a first year marketing course that was designed to promote student engagement. Currently in its pilot stage, the ‘Get Marketer Challenge’ is a constructively aligned, authentic assessment task; requiring student teams to solve a real-world marketing problem as part of a course-wide competition. Student enrolment data suggests the Get Marketer Challenge is an attractive assessment option that encourages students to enrol in the Marketing course. Educators have been surprised by the consistency and high level of effort expended by student teams. Students report the Get Marketer Challenge is an enjoyable assessment task that helped them to understand some of the challenges faced by marketers.

Introductory physics, a book for college students,

"Based on mimeographed pupil's trial edition" published in 1930 in two volumes.

The project physics course: reader.

unit 1. Concepts of motion.--unit 2. Motion in the heavens.--unit 3. The triumph of mechanics.--unit 4. Light and electromagnetism.--unit 5. Models of the atom.--unit 6. The nucleus.

A gender study investigating physics self-efficacy

The underrepresentation of women in physics has been well documented and a source of concern for both policy makers and educators. My dissertation focuses on understanding the role self-efficacy plays in retaining students, particularly women, in introductory physics. I use an explanatory mixed methods approach to first investigate quantitatively the influence of self-efficacy in predicting success and then to qualitatively explore the development of self-efficacy. In the initial quantitative studies, I explore the utility of self-efficacy in predicting the success of introductory physics students, both women and men. Results indicate that self-efficacy is a significant predictor of success for all students. I then disaggregate the data to examine how self-efficacy develops differently for women and men in the introductory physics course. Results show women rely on different sources of self-efficacy than do men, and that a particular instructional environment, Modeling Instruction, has a positive impact on these sources of self-efficacy. In the qualitative phase of the project, this dissertation focuses on the development of self-efficacy. Using the qualitative tool of microanalysis, I introduce a methodology for understanding how self-efficacy develops moment-by-moment using the lens of self-efficacy opportunities. I then use the characterizations of self-efficacy opportunities to focus on a particular course environment and to identify and describe a mechanism by which Modeling Instruction impacts student self-efficacy. Results indicate that the emphasizing the development and deployment of models affords opportunities to impact self-efficacy. The findings of this dissertation indicate that introducing key elements into the classroom, such as cooperative group work, model development and deployment, and interaction with the instructor, create a mechanism by which instructors can impact the self-efficacy of their students. Results from this study indicate that creating a model to impact the retention rates of women in physics should include attending to self-efficacy and designing activities in the classroom that create self-efficacy opportunities.

Transforming Participation: A Case Study of an Introductory Physics Student in a Modeling Instruction Class

We present a case study on how participation of one student changed during her first semester of introductory physics class using Modeling Instruction. Using video recordings, we explore how her behavior is consistent with a change from thinking of group learning as a parallel activity to one that is collaborative.

Addressing students' difficulties with Faraday's law: A guided problem solving approach

In traditional teaching, the fundamental concepts of electromagnetic induction are usually quickly analyzed, spending most of the time solving problems in a more or less rote manner. However, physics education research has shown that the fundamental concepts of the electromagnetic induction theory are barely understood by students. This article proposes an interactive teaching sequence introducing the topic of electromagnetic induction. The sequence has been designed based on contributions from physics education research. Particular attention is paid to the relationship between experimental findings (macroscopic level) and theoretical interpretation (microscopic level). An example of the activities that have been designed will also be presented, describing the implementation context and the corresponding findings. Since implementing the sequence, a considerable number of students have a more satisfactory grasp of the electromagnetic induction explicative model. However, difficulties are manifested in aspects that require a multilevel explanation, referring to deep structures where the system description is better defined.

Over two decades of blended and online physics courses at Michigan State University

In Fall 1992, our first physics course offered online homework. Over two decades later, we have seven physics courses online, spanning the whole range of introductory course offerings, with a total of over 1600 students in 2014. We found that several of the the purely online courses had better learning success than traditional lecture courses, as measured by exam scores. Particularly successful were online materials with embedded assessment. This result can be interpreted in different ways, but may serve as an indicator that during in-class lectures, we are oftentimes not taking advantage of the fact that we have the students on-site.

Toward equity through participation in Modeling Instruction in introductory university physics

We report the results of a five year evaluation of the reform of introductory calculus-based physics by implementation of Modeling Instruction (MI) at Florida International University (FIU), a Hispanic-serving institution. MI is described in the context of FIU’s overall effort to enhance student participation in physics and science broadly. Our analysis of MI from a “participationist” perspective on learning identifies aspects of MI including conceptually based instruction, culturally sensitive instruction, and cooperative group learning, which are consistent with research on supporting equitable learning and participation by students historically under-represented in physics (i.e., Black, Hispanic, women). This study uses markers of conceptual understanding as measured by the Force Concept Inventory (FCI) and odds of success as measured by the ratio of students completing introductory physics and earning a passing grade (i.e., C− or better) by students historically under-represented in physics to reflect equity and participation in introductory physics. FCI pre and post scores for students in MI are compared with lecture-format taught students. Modeling Instruction students outperform students taught in lecture-format classes on post instruction FCI (61.9% vs 47.9%, p

Understanding the quantitative skill base on introductory statistics : a case study from business statistics

Basic mathematical skills are critical to a student’s ability to successfully undertake an introductory statistics course. Yet in business education this vitally important area of mathematics and statistics education is under-researched. The question therefore arises as to what level of mathematical skill a typical business studies student will possess as they enter the tertiary environment, and whether there are any common deficiencies that we can identify with a view to tackling the problem. This paper will focus on a study designed to measure the level of mathematical ability of first year business students. The results provide timely insight into a growing problem faced by many tertiary educators in this field.

Enhancing Physics Education in the National Defence University : A design based research approach in the production of learning material

This research is connected with an education development project for the four-year-long officer education program at the National Defence University. In this curriculum physics was studied in two alternative course plans namely scientific and general. Observations connected to the later one e.g. student feedback and learning outcome gave indications that action was needed to support the course. The reform work was focused on the production of aligned course related instructional material. The learning material project produced a customized textbook set for the students of the general basic physics course. The research adapts phases that are typical in Design Based Research (DBR). The research analyses the feature requirements for physics textbook aimed at a specific sector and frames supporting instructional material development, and summarizes the experiences gained in the learning material project when the selected frames have been applied. The quality of instructional material is an essential part of qualified teaching. The goal of instructional material customization is to increase the product's customer centric nature and to enhance its function as a support media for the learning process. Textbooks are still one of the core elements in physics teaching. The idea of a textbook will remain but the form and appearance may change according to the prevailing technology. The work deals with substance connected frames (demands of a physics textbook according to the PER-viewpoint, quality thinking in educational material development), frames of university pedagogy and instructional material production processes. A wide knowledge and understanding of different frames are useful in development work, if they are to be utilized to aid inspiration without limiting new reasoning and new kinds of models. Applying customization even in the frame utilization supports creative and situation aware design and diminishes the gap between theory and practice. Generally, physics teachers produce their own supplementary instructional material. Even though customization thinking is not unknown the threshold to produce an entire textbook might be high. Even though the observations here are from the general physics course at the NDU, the research gives tools also for development in other discipline related educational contexts. This research is an example of an instructional material development work together the questions it uncovers, and presents thoughts when textbook customization is rewarding. At the same time, the research aims to further creative customization thinking in instruction and development. Key words: Physics textbook, PER (Physics Education Research), Instructional quality, Customization, Creativity

R Markdown: Integrating A Reproducible Analysis Tool into Introductory Statistics

Nolan and Temple Lang argue that “the ability to express statistical computations is an es- sential skill.” A key related capacity is the ability to conduct and present data analysis in a way that another person can understand and replicate. The copy-and-paste workflow that is an artifact of antiquated user-interface design makes reproducibility of statistical analysis more difficult, especially as data become increasingly complex and statistical methods become increasingly sophisticated. R Markdown is a new technology that makes creating fully-reproducible statistical analysis simple and painless. It provides a solution suitable not only for cutting edge research, but also for use in an introductory statistics course. We present experiential and statistical evidence that R Markdown can be used effectively in introductory statistics courses, and discuss its role in the rapidly-changing world of statistical computation.

The summary of a course of experimental lectures in natural philosophy by Dr. John Winthrop (manuscript copy), 1772-1774

Notebook with a handwritten copy of lecture summaries for a physics course given by Harvard Professor John Winthrop. The notes were made by Timothy Foster in 1772 and 1773. The volume contains twenty-five lectures with some diagrams.