Weak links between exports and economic growth in Latin America and the Caribbean

Includes bibliography

Transport Barkhausen-like noise in uniaxially pressed Bi(1.65)Pb(0.35)Sr(2)Ca(2)Cu(3)O(10+delta) ceramic samples

We report on the detection of the transport Barkhausen-like noise (TBN) in polycrystalline samples of Bi(1.65)Pb(0.35)Sr(2)Ca(2) Cu(3)O(10+delta) (Bi-2223) which were subjected to different uniaxial compacting pressures. The transport Barkhausen-like noise was measured when the sample was subjected to an ac triangular-shape magnetic field (f similar to 1 Hz) with maximum amplitude B(max) approximate to 5.5 mT, in order to avoid the flux penetration within the superconducting grains. Analysis of the TBN signal, measured for several values of excitation current density, indicated that the applied magnetic field in which the noise signal first appears, B(a)(t(i)), is closely related to the magnetic-flux pinning capability of the material. The combined results are consistent with the existence of three different superconducting levels within the samples: (i) the superconducting grains; (ii) the superconducting clusters; and (iii) the weak-links. We finally argue that TBN measurements constitute a powerful tool for probing features of the intergranular transport properties in polycrystalline samples of high-T(c) superconductors. (C) 2010 Elsevier B.V. All rights reserved.

A Small World Perspective on Urban Systems

The theory of small-world networks as initiated by Watts and Strogatz (1998) has drawn new insights in spatial analysis as well as systems theory. The theoryâeuro?s concepts and methods are particularly relevant to geography, where spatial interaction is mainstream and where interactions can be described and studied using large numbers of exchanges or similarity matrices. Networks are organized through direct links or by indirect paths, inducing topological proximities that simultaneously involve spatial, social, cultural or organizational dimensions. Network synergies build over similarities and are fed by complementarities between or inside cities, with the two effects potentially amplifying each other according to the âeurooepreferential attachmentâeuro hypothesis that has been explored in a number of different scientific fields (Barabási, Albert 1999; Barabási A-L 2002; Newman M, Watts D, Barabàsi A-L). In fact, according to Barabási and Albert (1999), the high level of hierarchy observed in âeurooescale-free networksâeuro results from âeurooepreferential attachmentâeuro, which characterizes the development of networks: new connections appear preferentially close to nodes that already have the largest number of connections because in this way, the improvement in the network accessibility of the new connection will likely be greater. However, at the same time, network regions gathering dense and numerous weak links (Granovetter, 1985) or network entities acting as bridges between several components (Burt 2005) offer a higher capacity for urban communities to benefit from opportunities and create future synergies. Several methodologies have been suggested to identify such denser and more coherent regions (also called communities or clusters) in terms of links (Watts, Strogatz 1998; Watts 1999; Barabási, Albert 1999; Barabási 2002; Auber 2003; Newman 2006). These communities not only possess a high level of dependency among their member entities but also show a low level of âeurooevulnerabilityâeuro, allowing for numerous redundancies (Burt 2000; Burt 2005). The SPANGEO project 2005âeuro"2008 (SPAtial Networks in GEOgraphy), gathering a team of geographers and computer scientists, has included empirical studies to survey concepts and measures developed in other related fields, such as physics, sociology and communication science. The relevancy and potential interpretation of weighted or non-weighted measures on edges and nodes were examined and analyzed at different scales (intra-urban, inter-urban or both). New classification and clustering schemes based on the relative local density of subgraphs were developed. The present article describes how these notions and methods contribute on a conceptual level, in terms of measures, delineations, explanatory analyses and visualization of geographical phenomena.

Absorptiivinen kapasiteetti käytäntölähtöisessä innovaatiotoiminnassa Päijät-Hämeessä

Tutkimuksessa arvioidaan millaisia kyvykkyyksiä toimijoiltavaaditaan, jotta voidaan edistää verkostoja palvelevan innovaatiopolitiikan toteutumista ja toteuttaa käytäntölähtöistä innovaatiotoimintaa. Empiirinen osa tarkastelee Päijät-Hämeen toimijoiden asenneympäristöä ja toimimisen valmiuksia käytäntölähtöisen innovaatiotoiminnan tarpeisiin sopivaksi. Osaaminen kerääntyy yliopistopaikkakunnille ulkoisten suurtuotannon etujen mukaisesti. Ne alueet, joilla ei ole yliopistoa joutuvat luomaan muunlaista innovaatiokyvykkyyttä saavuttaakseen kilpailuetua. Siksi Päijät-Hämeen visiona on tulla johtavaksi käytäntölähtöisen innovaatiotoiminnan alueeksi hyvien toimintamallien ja tehokkaiden tiedonsiirtomekanismien avulla. Tämä vaatii alueen toimijoilta mm. korkeaa absorptiivista kapasiteettia ja heikkoja linkkejä alueen ulkopuolelle. Työn empiirinen osa koostuu 12:sta puolistrukturoidusta haastattelusta sekä kyselytutkimuksesta. Tiedonluonti ja -siirto alueelle nähtiin pääasiassa tutkimusmaailman tehtävänä, mutta varianssianalyysin perusteella tutkimusmaailma ei itse nähnyt olevansa siinä asemassa. Yhteisen kielen puuttuminen tutkimus- ja käytännön työelämän väliltä nähtiin puutteena.

Asiakaspalveluprosessin mittariston luominen: Case Borealis Polymers Oy

Työn tavoitteena oli luoda asiakaspalveluprosessin mittaristo päivittäisen operatiivisen toiminnan seuraamiseksi ja parantamiseksi. Tarkoituksena oli mitata tilaustoimitusketjun suorituskykyä sekä tutkia mahdollisia kehitys ja parannuskohteita. Työ tehtiin Borealis Polymers Oy:n Fenolin Liiketoimintayksikölle. Yhtiön käytössä on Balanced Scorecard KPI- mittaristo. Asiakaspalveluprosessin mittaristo luotiin BSC asiakasnäkökulman mukaisesti soveltuen yhtiön toimintaympäristöön ja tavoitteisiin. Mittariston tarkoituksena on täydentää KPI- mittareita keskittyen päivittäisen asiakaspalveluprosessin suorituskyvyn ja asiakastyytyväisyyden parantamiseen. Asiakaspalveluprosessia kuvaavia mittareita testattiin suorittamalla asiakastyytyväisyyskysely, joka käytännössä toteutettiin sähköpostitse tehtynä tyytyväisyysmittauksena. Mittauksella haluttiin selvittää asiakastyytyväisyyden taso, palvelun eritekijöiden suhteellinen tärkeys asiakkaille eli mitkä laadun tekijät ovat asiakkaille tärkeimmät sekä miten asiakas kokee Borealiksen asiakaspalvelun suhteessa kilpailijoihin. Asiakaspalvelukysely on osa yhtiön kuluen vuoden aikana tehtävää asiakastyytyväisyysselvitystä. Lisäksi työn tavoitteena oli luoda jatkuvan toiminnan seuraamiseksi tulevaisuutta varten mittarit asiakkaille tärkeimpien laadun tekijöiden seuraamiseksi.

Développement de procédés efficaces pour la construction et la production de vecteurs adénoviraux

L’adénovirus possède plusieurs caractéristiques faisant de ce virus un candidat de choix pour la construction de vecteurs utiles dans les études de génomique fonctionnelle. Dans la majorité de ces applications, on a recours à un vecteur adénoviral de première génération délété de sa région E1. L’utilisation de vecteurs adénoviraux comprend deux maillons faibles : la construction du vecteur et la production subséquente de ce dernier. Le développement de méthodes alternatives est donc nécessaire pour renforcer ces deux maillons, permettant ainsi une utilisation étendue de ces vecteurs. Ce développement va s’articuler sur deux axes : l’ingénierie du vecteur de transfert pour la construction de l’adénovirus recombinant et l’ingénierie d’une lignée cellulaire pour la production du vecteur. En utilisant un vecteur de transfert adénoviral co-exprimant, à partir d’un promoteur régulable à la tétracycline, la protéase de l’adénovirus et une protéine de fluorescence verte (GFP) par l’intermédiaire d’un site d’entrée ribosomal interne (IRES), notre groupe a établi que la sélection positive, via l’expression ectopique de la protéase, est un processus efficace pour la création de librairie d’adénovirus recombinants. Par contre, la diversité atteinte dans ce premier système est relativement faible, environ 1 adénovirus recombinant par 1 000 cellules. Le travail effectué dans le cadre de cette thèse vise à construire un nouveau transfert de vecteur dans lequel l’expression de la protéase sera indépendante de celle du transgène permettant ainsi d’optimiser l’expression de la protéase. Ce travail d’optimisation a permis de réduire le phénomène de transcomplémentation du virus parental ce qui a fait grimper la diversité à 1 virus recombinant par 75 cellules. Ce système a été mis à l’épreuve en générerant une librairie adénovirale antisens dirigée contre la GFP. La diversité de cette librairie a été suffisante pour sélectionner un antisens réduisant de 75% l’expression de la GFP. L’amplification de ce vecteur adénoviral de première génération doit se faire dans une lignée cellulaire exprimant la région E1 telle que les cellules 293. Par contre, un adénovirus de première génération se répliquant dans les cellules 293 peut échanger, par recombinaison homologue, son transgène avec la région E1 de la cellule créant ainsi un adénovirus recombinant réplicatif (RCA), compromettant ainsi la pureté des stocks. Notre groupe a déjà breveté une lignée cellulaire A549 (BMAdE1) exprimant la région E1, mais qui ne peut pas recombiner avec le transgène du virus. Par contre, le niveau de réplication de l’adénovirus dans les BMAdE1 est sous-optimal, à peine 15-30% du niveau obtenu dans les cellules 293. Le travail fait dans le cadre de cette thèse a permis de mettre en évidence qu’une expression insuffisante d’E1B-55K était responsable de la mauvaise réplication du virus dans les BMAdE1. Nous avons produit de nouveaux clones à partir de la lignée parentale via une transduction avec un vecteur lentiviral exprimant E1B-55K. Nous avons confirmé que certains clones exprimaient une plus grande quantité d’E1B-55K et que ces clones amplifiaient de manière plus efficace un vecteur adénoviral de première génération. Ce clone a par la suite été adapté à la culture en suspension sans sérum.

Las relaciones entre Ecuador y Colombia: un ejemplo de la necesidad de una política exterior democrática (Coyuntura)

El autor realiza una revisión de las que considera han sido las deficiencias de la política exterior ecuatoriana hacia Colombia. La carencia de consensos básicos, la escasa coordinación civil-militar, la falta de participación ciudadana, la débil vinculación entre política externa e interna y la usencia de una agenda específica para Colombia, son algunos de los aspectos analizados por Ponce, quien finalmente plantea algunos de los elementos que deberían fundamentar la elaboración de una política exterior de Ecuador hacia Colombia, destacando la elaboración de una agenda clara de política exterior que priorice los objetivos nacionales internos.

Temperature Dependence of the Intergranular Critical Current Density in Uniaxially Pressed Bi(1.65)Pb(0.35)Sr(2)Ca(2)Cu(3)O(10+delta) Samples

We have studied the normal and superconducting transport properties of Bi(1.65)Pb(0.35)Sr(2)Ca(2)Cu(3)O(10+delta) (Bi-2223) ceramic samples. Four samples, from the same batch, were prepared by the solid-state reaction method and pressed uniaxially at different compacting pressures, ranging from 90 to 250 MPa before the last heat treatment. From the temperature dependence of the electrical resistivity, combined with current conduction models for cuprates, we were able to separate contributions arising from both the grain misalignment and microstructural defects. The behavior of the critical current density as a function of temperature at zero applied magnetic field, J (c) (T), was fitted to the relationship J (c) (T)ae(1-T/T (c) ) (n) , with na parts per thousand 2 in all samples. We have also investigated the behavior of the product J (c) rho (sr) , where rho (sr) is the specific resistance of the grain-boundary. The results were interpreted by considering the relation between these parameters and the grain-boundary angle, theta, with increasing the uniaxial compacting pressure. We have found that the above type of mechanical deformation improves the alignment of the grains. Consequently the samples exhibit an enhance in the intergranular properties, resulting in a decrease of the specific resistance of the grain-boundary and an increase in the critical current density.

Gestão de risco na cadeia de suprimentos da indústria automotiva brasileira

Com um cenário de crescimento encontrado em poucos lugares do mundo, o mercado automotivo brasileiro tornou-se atraente, saltando de investimentos de cerca de US$ 1 bilhão em 2005 para mais de US$ 5 bilhões em 2012 (ANFAVEA, 2013). O presente trabalho tem o objetivo de fornecer um estudo de caso relacionado com a cadeia de suprimentos da indústria automotiva brasileira, com especial atenção à gestão de risco. Considerando a lacuna identificada na pesquisa, a saber, termos e definições sobre gestão de risco na cadeia de suprimentos ainda não consolidados e diferenças significativas entre pesquisadores, cobertura inadequada sobre as respostas aos riscos de incidentes e por fim, o uso inadequado de métodos empíricos nas pesquisas publicadas (SODHI; SON; TANG, 2012), a metodologia para o presente trabalho será o estudo de caso, uma vez que o mesmo oferece um meio apropriado para a análise aprofundada de práticas emergentes (VOSS et al., 2002). Dados secundários gerados pelo Sindipeças, pela ANFAVEA e por institutos nacionais serão usados na contextualização do estudo de caso, além de entrevistas semiestruturadas realizadas com executivos e especialistas das áreas de gestão de risco e cadeia de suprimentos de uma montadora e de um fornecedor tier 2 instalados no Brasil. Desta forma, espera-se mostrar como é a gestão de risco na cadeia de suprimentos da indústria automotiva brasileira através de um estudo de caso extremo, onde dois exemplares dos chamados elos forte (uma montadora) e fraco (um fornecedor tier 2) da cadeia possam ser comparados com base na teoria existente, a fim de entender seus limites, variáveis e eventuais novos achados.

A practical approach for biometric authentication based on smartcards

Cryptographic systems are safe. However, the management of cryptographic keys of these systems is a tough task. They are usually protected by the use of password-based authentication mechanisms, which is a weak link on conventional cryptographic systems, as the passwords can be easily copied or stolen. The usage of a biometric approach for releasing the keys is an alternative to the password-based mechanisms. But just like passwords, we need mechanisms to keep the biometrical signal safe. One approach for such mechanism is to use biometrical key cryptography. The cryptographic systems based on the use of biometric characteristics as keys are called biometrical cryptographic systems. This article presents the implementation of Fuzzy Vault, a biometrical cryptographic system written in Java, along with its performance evaluation. Fuzzy Vault was tested on a real application using smartcards.

Inomogeneidades estruturais em amostras nanoscópicas de supercondutores de alta temperatura crítica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Flux-Line-Lattice Melting and Upper Critical Field of Bi1.65Pb0.35Sr2Ca2Cu3O10+delta Ceramic Samples

We have conducted magnetoresistance measurements rho(T,H) in applied magnetic fields up to 18 T in Bi1.65Pb0.35Sr2Ca2Cu3O10+delta ceramic samples which were subjected to different uniaxial compacting pressures. The anisotropic upper critical fields H (c2)(T) were extracted from the rho(T,H) data, yielding and the out-of-plane superconducting coherence length xi (c) (0)similar to 3 . We have also estimated and xi (ab) (0) similar to 90 . In addition to this, a flux-line-lattice (FLL) melting temperature T (m) has been identified as a second peak in the derivative of the magnetoresistance d rho/dT data close to the superconducting transition temperature. An H (m) vs. T phase diagram was constructed and the FLL boundary lines were found to obey a temperature dependence H (m) ae(T (c) /T-1) (alpha) , where alpha similar to 2 for the sample subjected to the higher compacting pressure. A reasonable value of the Lindemann parameter c (L) similar to 0.29 has been found for all samples studied.

Sequence of the FRA3B common fragile region: Implications for the mechanism of FHIT deletion

The hypothesis that chromosomal fragile sites may be “weak links” that result in hot spots for cancer-specific chromosome rearrangements was supported by the discovery that numerous cancer cell homozygous deletions and a familial translocation map within the FHIT gene, which encompasses the common fragile site, FRA3B. Sequence analysis of 276 kb of the FRA3B/FHIT locus and 22 associated cancer cell deletion endpoints shows that this locus is a frequent target of homologous recombination between long interspersed nuclear element sequences resulting in FHIT gene internal deletions, probably as a result of carcinogen-induced damage at FRA3B fragile sites.

Participatory approach for the identification of dairy industry needs in the design of research, development and extension actions: Australian and Brazilian case studies

In both Australia and Brazil there are rapid changes occurring in the macroenvironment of the dairy industry. These changes are sometimes not noticed in the microenvironment of the farm, due to the labour-intensive nature of family farms, and the traditionally weak links between production and marketing. Trends in the external environment need to be discussed in a cooperative framework, to plan integrated actions for the dairy community as a whole and to demand actions from research, development and extension (R, D & E). This paper reviews the evolution of R, D & E in terms of paradigms and approaches, the present strategies used to identify dairy industry needs in Australia and Brazil, and presents a participatory strategy to design R, D & E actions for both countries. The strategy incorporates an integration of the opinions of key industry actors ( defined as members of the dairy and associated communities), especially farm suppliers ( input market), farmers, R, D & E people, milk processors and credit providers. The strategy also uses case studies with farm stays, purposive sampling, snowball interviewing techniques, semi-structured interviews, content analysis, focus group meetings, and feedback analysis, to refine the priorities for R, D & E actions in the region.