Ultrasound-assisted surface engineering of pharmaceutical powders

Effective processing of powdered particles can facilitate powder handling and result in better drug product performance, which is of great importance in the pharmaceutical industry where the majority of active pharmaceutical ingredients (APIs) are delivered as solid dosage forms. The purpose of this work was to develop a new ultrasound-assisted method for particle surface modification and thin-coating of pharmaceutical powders. The ultrasound was used to produce an aqueous mist with or without a coating agent. By using the proposed technique, it was possible to decrease the interparticular interactions and improve rheological properties of poorly-flowing water-soluble powders by aqueous smoothing of the rough surfaces of irregular particles. In turn, hydrophilic polymer thin-coating of a hydrophobic substance diminished the triboelectrostatic charge transfer and improved the flowability of highly cohesive powder. To determine the coating efficiency of the technique, the bioactive molecule β-galactosidase was layered onto the surface of powdered lactose particles. Enzyme-treated materials were analysed by assaying the quantity of the reaction product generated during enzymatic cleavage of the milk sugar. A near-linear increase in the thickness of the drug layer was obtained during progressive treatment. Using the enzyme coating procedure, it was confirmed that the ultrasound-assisted technique is suitable for processing labile protein materials. In addition, this pre-treatment of milk sugar could be used to improve utilization of lactose-containing formulations for populations suffering from severe lactose intolerance. Furthermore, the applicability of the thin-coating technique for improving homogeneity of low-dose solid dosage forms was shown. The carrier particles coated with API gave rise to uniform distribution of the drug within the powder. The mixture remained homogeneous during further tabletting, whereas the reference physical powder mixture was subject to segregation. In conclusion, ultrasound-assisted surface engineering of pharmaceutical powders can be effective technology for improving formulation and performance of solid dosage forms such as dry powder inhalers (DPI) and direct compression products.

Across the Oceans : Development of Overseas Business Information Transmission, 1815-1875

Earlier studies have shown that the speed of information transmission developed radically during the 19th century. The fast development was mainly due to the change from sailing ships and horse-driven coaches to steamers and railways, as well as the telegraph. Speed of information transmission has normally been measured by calculating the duration between writing and receiving a letter, or between an important event and the time when the news was published elsewhere. As overseas mail was generally carried by ships, the history of communications and maritime history are closely related. This study also brings a postal historical aspect to the academic discussion. Additionally, there is another new aspect included. In business enterprises, information flows generally consisted of multiple transactions. Although fast one-way information was often crucial, e.g. news of a changing market situation, at least equally important was that there was a possibility to react rapidly. To examine the development of business information transmission, the duration of mail transport has been measured by a systematic and commensurable method, using consecutive information circles per year as the principal tool for measurement. The study covers a period of six decades, several of the world's most important trade routes and different mail-carrying systems operated by merchant ships, sailing packets and several nations' steamship services. The main sources have been the sailing data of mail-carrying ships and correspondence of several merchant houses in England. As the world's main trade routes had their specific historical backgrounds with different businesses, interests and needs, the systems for information transmission did not develop similarly or simultaneously. It was a process lasting several decades, initiated by the idea of organizing sailings in a regular line system. The evolution proceeded generally as follows: originally there was a more or less irregular system, then a regular system and finally a more frequent regular system of mail services. The trend was from sail to steam, but both these means of communication improved following the same scheme. Faster sailings alone did not radically improve the number of consecutive information circles per year, if the communication was not frequent enough. Neither did improved frequency advance the information circulation if the trip was very long or if the sailings were overlapping instead of complementing each other. The speed of information transmission could be improved by speeding up the voyage itself (technological improvements, minimizing the waiting time at ports of call, etc.) but especially by organizing sailings so that the recipients had the possibility to reply to arriving mails without unnecessary delay. It took two to three decades before the mail-carrying shipping companies were able to organize their sailings in an optimal way. Strategic shortcuts over isthmuses (e.g. Panama, Suez) together with the cooperation between steamships and railways enabled the most effective improvements in global communications before the introduction of the telegraph.

Locus Bonus : The Relationship of the Roman Villa to its Environment in the Vicinity of Rome

The aim of this study is to examine the relationship of the Roman villa to its environment. The villa was an important feature of the countryside intended both for agricultural production and for leisure. Manuals of Roman agriculture give instructions on how to select a location for an estate. The ideal location was a moderate slope facing east or south in a healthy area and good neighborhood, near good water resources and fertile soils. A road or a navigable river or the sea was needed for transportation of produce. A market for selling the produce, a town or a village, should have been nearby. The research area is the surroundings of the city of Rome, a key area for the development of the villa. The materials used consist of archaeological settlement sites, literary and epigraphical evidence as well as environmental data. The sites include all settlement sites from the 7th century BC to 5th century AD to examine changes in the tradition of site selection. Geographical Information Systems were used to analyze the data. Six aspects of location were examined: geology, soils, water resources, terrain, visibility/viewability and relationship to roads and habitation centers. Geology was important for finding building materials and the large villas from the 2nd century BC onwards are close to sources of building stones. Fertile soils were sought even in the period of the densest settlement. The area is rich in water, both rainfall and groundwater, and finding a water supply was fairly easy. A certain kind of terrain was sought over very long periods: a small spur or ridge shoulder facing preferably south with an open area in front of the site. The most popular villa resorts are located on the slopes visible from almost the entire Roman region. A visible villa served the social and political aspirations of the owner, whereas being in the villa created a sense of privacy. The area has a very dense road network ensuring good connectivity from almost anywhere in the region. The best visibility/viewability, dense settlement and most burials by roads coincide, creating a good neighborhood. The locations featuring the most qualities cover nearly a quarter of the area and more than half of the settlement sites are located in them. The ideal location was based on centuries of practical experience and rationalized by the literary tradition.

Phosphorus retention in forest soils and the functioning of buffer zones used in forestry

Phosphorus (P) retention properties of soils typical for boreal forest, i.e. podzolic soil and peat soils, vary significantly, but the range of this variation has not been sufficiently documented. To assess the usefulness of buffer zones used in forestry in removing P from the discharge by chemical sorption in soil, and to estimate the risk of P leaching after forestry operations, more data is needed on soil P retention properties. P retention properties of soils were studied at clear-cut areas, unharvested buffer zones adjoining the clear-cut and at peatland buffer zone areas. Desorption-sorption isotherms were determined for the humus layer, the mineral soil horizons E, B and C of the Podzol profile and for the surface layer peat (0-15 cm) and the subsurface layer peat (15-30 cm). The efficiency of buffer zones in retaining P was studied at six peatland buffer zone areas by adding P-containing solute in the inflow. A tracer study was conducted at one of the buffer zone areas to determine the allocation of the added P in soil and vegetation. Measured sorption or desorption rather than parameter values of fitted sorption equations described P desorption and sorption behaviour in soil. The highest P retention efficiency was in the B horizon and consequently, if contact occurred or was established between the soluble P in the water and the soil B horizon, the risk of P leaching was low. Humus layer was completely incapable of retaining P after clear-cutting. In the buffer zones, the decrease in P retention properties in the humus layer and the low amount of P sorbed by it indicated that the importance of the layer in the functioning of buffer zones is low. The peatland buffer zone areas were efficient in retaining soluble P from inflow. P sorption properties of the peat soil at the buffer zone areas varied largely but the contribution of P sorption in the peat was particularly important during high flow in spring, when the vegetation was not fully developed. Factors contributing to efficient P retention were large buffer size and low hydrological load whereas high hydrological load combined with the formation of preferential flow paths, especially during early spring or late autumn was disadvantageous. However, small buffer zone areas, too, may be efficient in reducing P load.

Langattoman peltotiedustelijan maanalainen toimintaympäristö ja laitesuunnittelu

Tässä väitöskirjassa esitellään langattomien maanalaisten peltotiedustelijoiden järjestelmän tavoitteet ja rajoitukset. Tarkoitus oli kehittää käytännön viljelyyn sovellettava pellon seurantajärjestelmä, sillä reaaliaikaisen kosteus- ja lämpötilatiedon keruulaitteiden puuttuminen haittaa viljelytoimenpiteiden suunnittelua. Mittaus-aineistosta voi tehdä sekä havaintoja pellon ominaisuuksista että muutoksista niissä. Tulevaisuudessa tiedustelijalla saatetaan voida mitata ravinteita tai kemikaaleja. Kun peltotiedustelijan 869 MHz:n radioaalto saavuttaa vastaanottoantennin, on 1) maa-aines vaimentanut sitä; 2) osa aallosta heijastunut rajapinnoilta; 3) pellosta ulos taittuva aalto hajaantunut ja; 4) aallon intensiteetti alentunut etäisyyden kasvaessa. Maan sähkökenttäkäyttäytymistä kuvaava permittiivisyys on kompleksinen suure, jonka reaaliosa kuvaa varautumiskykyä (polarisoitumista) ja imaginaariosa häviöllisyyttä (sähkönjohtavuutta). Pellon pinnassa aalto on pallomainen, joten heijastumisen lisäksi hajaannuttaa taittuminen suurilla taitekulmilla sen tehoa. Tiedustelijan prototyyppiä varten kehitettiin maa-aineksessa toimivat antennit, joiden taajuuskaistat kattoivat ne aallonpituudet, jotka 869 MHz:n radioaalto saa kuivassa ja märässä mullassa, sillä aallon etenemisnopeus ja pituus muuttuvat maan kosteudesta riippuen. Vaimennusmallin testausmittauksiin tehtiin discone-antenni, ja tiedustelijaa varten piirilevytekniikalla pienikokoinen elliptinen monopoliantenni, jonka piirikortille ladottiin myös tiedustelijan elektroniikka. Multalaatikkoon upotettujen antennien säteilyominaisuudet määritettiin piirianalysaattorilla heijastusvaimennusmittauksin. Elektroniikkasuunnittelun tavoitteita oli pieni koko ja pitkä toimintaikä. Näihin päästiin komponenttivalinnoilla sekä ohjelmoinnin keinoin. Tiedustelija teki mittaukset ja lähetti tulokset 10 min välein ja sen keskivirrankulutus oli 4,2 uA käytettäessä 3 V:n paristoa, jonka 1800 mAh kapasiteetti riittäisi huonollakin hyötysuhteella yli 10 vuodeksi. Vuoden mittaisen 12 prototyypin käytön perusteella voidaan kantamaa parantaa yli nykyisen 200 m:n ilman käyttöiän lyhentymistä 1) nostamalla laitteen lähetystehoa ja pariston käyttöastetta lisäkomponenteilla; 2) parantamalla vastaanottoantennin vahvistusta; 3) pidentämällä lähetysten jaksoa; 4) ohjelmoimalla tiedustelija suodattamaan mittaustietoja ja; 5) koodaamalla useita tuloksia samaan lähetteeseen. Järjestelmän ja mittaustulosten käytettävyyttä voidaan parantaa paikantamalla tiedustelijoiden syvyydet aaltoilevan lämpötilan vaihe-erojen perusteella ja ohjelmoimalla tiedustelijaan opastava asennustoiminto. Lisäksi maahan asennetun tiedustelijan toimintaparametrit tai jopa koko ohjelmisto voidaan vaihtaa langattomasti. Vastaanottoasemat matkapuhelinmastoissa voisivat vastaanottaa viestejä parin kilometrin säteeltä. Koostettu aineisto maaperäsimulaattoreihin yhdistettynä antaisi kuvan alueellisesta tilanteesta ja viljelijän omille lohkoille sijoitetut tiedustelijat korjauspisteitä keskiarvosta.

Vadelman (Rubus idaeus) kasvunsäätö proheksadioni-kalsiumin avulla

Vadelman (Rubus idaeus L.) viljelyala on kasvanut Suomessa voimakkaasti viimeisten viiden vuoden aikana. Vuonna 2005 vadelmaa viljeltiin 473 hehtaarilla. Vadelman satoindeksi on alhainen. Sen pääverso on pitkä, mikä hankaloittaa hoitotoimenpiteitä. Kasvin satoisimmat silmut ovat pääverson kärjessä, joten latvontaa ei kannata tehdä. Suomessakin haluttaisiin kehittää vadelman kasvihuonetuotantoa satokauden pidentämiseksi. Kasvihuonetuotannossa vegetatiivisen kasvun säätäminen on vielä tärkeämpää kuin avomaan viljelyssä. Proheksadioni-kalsium (ProCa) on gibberelliinisynteesi-inhibiittori, jonka on havaittu lyhentävän nivelvälejä sekä lisäävän versojen ja lehtien hiilihydraattipitoisuutta mm. omenalla (Malus domestica Borkh.). Tämän Helsingin yliopiston soveltavan biologian laitoksella toteutetun tutkimuksen tarkoituksena oli selvittää, miten ProCa vaikuttaa kahden kesävadelmalajikkeen ensimmäisen vuoden versojen vegetatiiviseen kasvuun ja edelleen sadontuottokykyyn. Tässä pro gradu -työssä tutkittiin ProCa:n vaikutusta kahden kesävadelmalajikkeen vegetatiiviseen kasvuun, satopotentiaaliin sekä versojen ja silmujen hiilihydraattipitoisuuksiin kesällä 2005 ja talvella 2006. Koetaimina oli 120 Tulameen-lajikkeen ja 150 Glen Ample -lajikkeen tainta. Taimet käsiteltiin kesäkuussa ja käsittely uusittiin osalle taimista neljän viikon kuluttua ensimmäisestä käsittelystä. Koekäsittelyitä oli neljä: ProCa 100 ppm, ProCa 200 ppm, ProCa 100 ppm + ProCa 100 ppm ja ProCa 200 ppm + ProCa 200 ppm. Kontrollikäsittelyitä oli kaksi: vesi sekä vesi + vesi. Kesän aikana havainnoitiin pääverson pituuskasvua ja nivelien määrää. Kesän kasvatuskauden päätyttyä Glen Ample -lajikkeen silmujen ja versojen liukoiset hiilihydraatit ja tärkkelys määritettiin entsymaattisesti. Kylmävarastoinnin jälkeen (71 vrk) tammikuussa 2006 taimet siirrettiin hyötöön kasvihuoneeseen. Hyödön aikana havainnoitiin silmujen puhkeamista ja kukintaa. Hyödön päättyessä hanka- ja pääversojen kuivapaino sekä hankaversojen pituus mitattiin. Kesän 2005 aikana ProCa lyhensi uusien nivelvälien pituuksia väliaikaisesti 1 4 viikon kuluttua käsittelystä. Nivelien lukumäärässä ei tapahtunut suuria muutoksia. Tulameen-lajikkeella kasvu kiihtyi käsittelyn vaikutuksen loputtua. Nivelvälien lyhentymisen takia pääverson kokonaispituus jäi kontrolliin verrattuna 35 % lyhyemmäksi Glen Ample -lajikkeella (ProCa 200 + ProCa 200) ja 14 % lyhyemmäksi Tulameen-lajikkeella samalla käsittelyllä. Myös käsittely ProCa 200 vähensi pääverson pituutta 6 % kontrolliin verrattuna Tulameen-lajikkeella. ProCa-käsittely lisäsi versojen ja silmujen hiilihydraattipitoisuuksia, mutta tuloksissa oli paljon hajontaa. Glen Ample -lajikkeella kaksinkertaiset käsittelyt vähensivät puhjenneiden silmujen osuutta 8 15 päivän kuluttua hyödön aloittamisesta 24 29 %, mutta käsittelyiden väliset erot tasoittuivat hyödön loppuun mennessä. Lisäksi kaksinkertaiset ProCa-käsittelyt vähensivät kukkien määrää 29 44 % 33 65 päivää hyödön alusta, mutta erot tasoittuivat hyödön loppuun mennessä. Käsittelyt eivät vaikuttaneet Tulameen-lajikkeen silmujen puhkeamiseen ja kukintaan. Satopotentiaalissa ei ollut eroa ProCa-käsittelyiden välillä kummallakaan lajikkeella. Glen Ample -lajikkeella hankaversojen kokonaismäärä väheni 27 32 % kasveilla, joita oli käsitelty kaksi kertaa ProCa:lla. Hankaversot olivat kuitenkin vastaavasti 29 43 % pidempiä. Tulameen-lajikkeella ProCa 100 -käsittely vähensi hankaversojen määrää 15 %, mutta hankaversojen pituuteen käsittelyillä ei ollut vaikutusta. Käsittelyillä ei ollut vaikutusta hankaversojen nivelvälien pituuteen kummallakaan lajikkeella. Tutkimuksen perusteella kesällä annetulla ProCa-käsittelyllä voidaan lyhentää pääverson pituutta, mutta satopotentiaaliin käsittelyllä ei ole vaikutusta. Käsittelyajankohta on kriittinen, koska kukkasilmujen kehitys näyttäisi häiriintyvän, jos ruiskutus tehdään loppukesällä.

Chemical characteristics and behaviour of sediment phosphorus in the northeastern Baltic Sea.

Chemical characteristics and behaviour of sediment phosphorus in the northeastern Baltic Sea Eutrophication is a severe environmental problem in the Baltic Sea, especially in the Gulf of Finland and the Archipelago Sea, and it is enhanced by the release of phosphorus (P) from bottom sediments. The release of P from sediment reserves largely depends on the occurrence of P in different chemical forms and on the prevailing conditions, especially on the presence of oxygen. This study examines the chemical character and the vertical distribution of sediment P in two shallow estuaries, in shallow coastal sediments overlain by oxic near-bottom water, and in poorly oxygenated open sea sediments in the northeastern Baltic Sea. The objective was to evaluate how much of the sediment P is buried and removed from the nutrient cycle, and how much of it is in forms that can be released from the sediment to the overlaying water over time. Relationships between the distribution of the different P forms and the chemical and physical properties of the sediment, sediment pore water, and near-bottom water were determined in order to examine the behaviour of P at the sediment-water interface. The results show that the chemical character of sediment P varied in the different areas. Generally, in the outer estuaries and in the organic-rich coastal areas in the eastern Gulf of Finland, the sediments were higher in P than the sediments in the poorly oxygenated open sea areas in the central and western Gulf. The estuary sediments that received erosion-transported material were characterised by P bound to hydrated oxides of iron and aluminum. Iron-bound P is sensitive to changes in redox-conditions, but part of it was buried in the estuaries, possibly because of high sedimentation rates and incomplete reduction of iron. The open sea sediments in the central and western Gulf of Finland were dominated by apatite-P, which was also abundant in the areas strongly affected by sediment transportation. The burial of sediment P was most effective in the areas rich in apatite-P, which is a relatively stable form of P in sediment. In the eastern Gulf of Finland, organic P forms predominated in the organic-rich sediments. A part of these P forms will be buried, while part will be degraded in the long term, releasing soluble P to the pore water. In the poorly oxygenated areas, iron compounds at the sediment surface are not able to retain P released during mineralisation of organic matter or reduction-induced dissolution of iron-compounds in deep sediment layers. However, in the shallow coastal areas overlain by oxic near-bottom water, the organic-rich surface sediment can also become temporarily reduced and release P from the sediment to the overlaying water. The considerable variation in the chemical composition of sediment P reserves in the northeastern Baltic Sea proved that it is an important factor and should be taken into account when evaluating the release of sediment P and the role of P reserves in bottom sediments in eutrophication.

Preparation and characterization of potato starch films plasticized with polyols

The present study investigated the potato starches and polyols which were used to prepare edible films. The amylose content and the gelatinization properties of various potato starches extracted from different potato cultivars were determined. The amylose content of potato starches varied between 11.9 and 20.1%. Onset temperatures of gelatinization of potato starches in excess water varied independently of the amylose content from 58 to 61°C determined using differential scanning calorimetry (DSC). The crystallinity of selected native starches with low, medium and high amylose content was determined by X-ray diffraction. The relative crystallinity was found to be around 10 13% in selected native potato starches containing 13 17% water. The glass transition temperature, crystallization melting behavior and relaxations of polyols, erythritol, sorbitol and xylitol, were determined using (DSC), dielectric analysis (DEA) and dynamic mechanical analysis (DMA). The glass transition temperatures of xylitol and sorbitol decreased as a result of water plasticization. Anhydrous amorphous erythritol crystallized rapidly. Edible films were obtained from solutions containing gelatinized starch, plasticizer (polyol or binary polyol mixture) and water by casting and evaporating water at 35°C. The present study investigated effects of plasticizer type and content on physical and mechanical properties of edible films stored at various relative water vapor pressures (RVP). The crystallinity of edible films with low, medium and high amylose content was determined by X-ray diffraction and they were found to be practically amorphous. Water sorption and water vapor permeability (WVP) of films was affected by the type and content of plasticizer. Water vapor permeability of films increased with increasing plasticizer content and storage RVP. Generally, Young's modulus and tensile strength decreased with increasing plasticizer and water content with a concurrent increase in elongation at break of films. High contents of xylitol and sorbitol resulted in changes in physical and mechanical properties of films probably due to phase separation and crystallization of xylitol and sorbitol which was not observed when binary polyol mixtures were used as plasticizers. The mechanical properties and the water vapor permeability (WVP) of the films were found to be independent of the amylose content.

Bacillus cereus spores and cereulide in food-borne illness

B. cereus is a gram-positive bacterium that possesses two different forms of life:the large, rod-shaped cells (ca. 0.002 mm by 0.004 mm) that are able to propagate and the small (0.001 mm), oval shaped spores. The spores can survive in almost any environment for up to centuries without nourishment or water. They are insensitive towards most agents that normally kill bacteria: heating up to several hours at 90 ºC, radiation, disinfectants and extreme alkaline (≥ pH 13) and acid (≤ pH 1) environment. The spores are highly hydrophobic and therefore make them tend to stick to all kinds of surfaces, steel, plastics and live cells. In favorable conditions the spores of B. cereus may germinate into vegetative cells capable of producing food poisoning toxins. The toxins can be heat-labile protein formed after ingestion of the contaminated food, inside the gastrointestinal tract (diarrhoeal toxins), or heat stable peptides formed in the food (emesis causing toxin, cereulide). Cereulide cannot be inactivated in foods by cooking or any other procedure applicable on food. Cereulide in consumed food causes serious illness in human, even fatalities. In this thesis, B. cereus strains originating from different kinds of foods and environments and 8 different countries were inspected for their capability of forming cereulide. Of the 1041 isolates from soil, animal feed, water, air, used bedding, grass, dung and equipment only 1.2 % were capable of producing cereulide, whereas of the 144 isolates originating from foods 24 % were cereulide producers. Cereulide was detected by two methods: by its toxicity towards mammalian cells (sperm assay) and by its peculiar chemical structure using liquid-chromatograph-mass spectrometry equipment. B. cereus is known as one of the most frequent bacteria occurring in food. Most foods contain more than one kind of B. cereus. When randomly selected 100 isolates of B. cereus from commercial infant foods (dry formulas) were tested, 11% of these produced cereulide. Considering a frequent content of 103 to 104 cfu (colony forming units) of B. cereus per gram of infant food formula (dry), it appears likely that most servings (200 ml, 30 g of the powder reconstituted with water) may contain cereulide producers. When a reconstituted infant formula was inoculated with >105 cfu of cereulide producing B. cereus per ml and left at room temperature, cereulide accumulated to food poisoning levels (> 0.1 mg of cereulide per serving) within 24 hours. Paradoxically, the amount of cereulide (per g of food) increased 10 to 50 fold when the food was diluted 4 - 15 fold with water. The amount of the produced cereulide strongly depended on the composition of the formula: most toxin was formed in formulas with cereals mixed with milk, and least toxin in formulas based on milk only. In spite of the aggressive cleaning practices executed by the modern dairy industry, certain genotypes of B. cereus appear to colonise the silos tanks. In this thesis four strategies to explain their survival of their spores in dairy silos were identified. First, high survival (log 15 min kill ≤ 1.5) in the hot alkaline (pH >13) wash liquid, used at the dairies for cleaning-in-place. Second, efficient adherence of the spores to stainless steel from cold water. Third, a cereulide producing group with spores characterized by slow germination in rich medium and well preserved viability when exposed to heating at 90 ºC. Fourth, spores capable of germinating at 8 ºC and possessing the psychrotolerance gene, cspA. There were indications that spores highly resistant to hot 1% sodium hydroxide may be effectively inactivated by hot 0.9% nitric acid. Eight out of the 14 dairy silo tank isolates possessing hot alkali resistant spores were capable of germinating and forming biofilm in whole milk, not previously reported for B. cereus. In this thesis it was shown that cereulide producing B. cereus was capable of inhibiting the growth of cereulide non-producing B. cereus occurring in the same food. This phenomenon, called antagonism, has long been known to exist between B. cereus and other microbial species, e.g. various species of Bacillus, gram-negative bacteria and plant pathogenic fungi. In this thesis intra-species antagonism of B. cereus was shown for the first time. This brother-killing did not depend on the cereulide molecule, also some of the cereulide non-producers were potent antagonists. Interestingly, the antagonistic clades were most frequently found in isolates from food implicated with human illness. The antagonistic property was therefore proposed in this thesis as a novel virulence factor that increases the human morbidity of the species B. cereus, in particular of the cereulide producers.

Molecular phylogeny of Archaea in boreal forest soil, freshwater and temperate estuarine sediment

Suurin osa luonnossa havaitsemistamme mikrobeista on sellaisia, joita emme edelleenkään osaa kasvattaa laboratorio-oloissa, vaikka tietomme mikrobien monimuotoisuudesta paranevat koko ajan. Luonnontilaisen mikrobieliöstön kokoonpano eri ympäristöissä on paljolti epäselvä ja ymmärrämme vielä hyvin puutteellisesti mikrobien ekologiaa ja niiden rooleja eliöyhteisöissä. Nykyaikaiset molekulaariset tutkimusmenetelmät auttavat selvittämään mikrobien monimuotoisuutta kokonaisvaltaisesti ja nopeasti. Ympäristöstä kemiallisesti puhdistetut ribosomaalista RNA:ta koodaavat geenit edustavat periaatteessa kaikkia eliöyhteisön geneettisesti toisistaan poikkeavia eliöitä. Niistä voidaan valikoida halutut genomit jatkotutkimuksia varten. Uusien menetelmien käyttö on tuonut esiin sen merkittävän seikan, että "tavanomaisten" elinympäristöjen eliöyhteisöihin kuuluu suuri joukko entuudestaan tuntemattomia arkkieliöitä. Aiemmin kuviteltiin, että arkkieliöt asuttavat vain sellaisia "epätavallisia" tai "äärimmäisiä" elinympäristöjä, joita luonnehtii joku seuraavista ominaisuuksista: hyvin korkea lämpötila, korkea suolapitoisuus, korkea happamuus tai emäksisyys, hapettomuus. Tutkijat ovat viimeisen noin kymmenen vuoden aikana osoittaneet, että arkkieliöt asuttavat hyvin monenlaisia kylmän ja lauhkean vyöhykkeen ympäristöjä, yhtä hyvin maaperää kuin suolaisen ja makean veden pohjaa tai pintakerroksia. Nämä löydöt ovat avanneet uuden alun arkkieliöiden tutkimukselle, erityisesti sen selvittämiselle, mitkä ovat niiden fysiologiset ja ekologiset roolit monimuotoisissa mikrobiyhteisöissä. Tämä väitöskirja kuvaa entuudestaan tuntemattomien arkkieliöiden löytymistä havumetsävyöhykkeen metsämaasta. Arkkieliöitä löytyi myös lauhkean vyöhykkeen vuorovesialueelta, murtoveden huuhtelemasta pohjasta. Nämä löydöt ovat perustavalaatuisia vuorovesialueen eliöyhteisöjen ymmärtämiseksi. Suomalaisen metsäjärven vedestä määritettiin molempien arkkieliöiden pääryhmien - tieteellisiltä nimiltään Crenarchaeota ja Euryarchaeota - edustajia. Euryarchaeota-ryhmän edustajia voitiin havainnoida myös fluoresenssi-mikroskopoinnilla. Löydöt viittaavat siihen, että arkkieliöillä on oma biogeokemiallinen roolinsa makeanveden ravintoketjujen hiilen käytössä. Tässä työssä määritetyt uudet arkkieliöiden genomien nukleotidisekvenssit on toimitettu ARB-tietokantaan, jonka kasvava vertailuaineisto edelleen parantaa uusien arkkieliösekvenssien analyysiä ja auttaa hybridisaatiokoetinten ja polymeraasiketjureaktioalukkeiden suunnittelussa ja arvioinnissa. Tässä väitöskirjassa esitellyt tulokset yhdessä lukuisien vesi-, maaperä- ja muiden ympäristöjen arkkieliöitä käsittelevien julkaisujen kanssa osoittavat, että arkkieliöt asuttavat monia erilaisia elinympäristöjä ja että ne ovat ekologisesti paljon menestyneempiä, kuin tieteenalalla on kuviteltu. Voimme olettaa, että heti kun joitain näistä eliöistä onnistutaan kasvattamaan ja ylläpitämään laboratorio-oloissa, niiden joukosta löydetään aivan uusia, entuudestaan tuntemattomia fysiologisia fenotyyppejä, jotka avaavat mielenkiintoisia näkymiä aineenvaihdunnan ja perinnöllisten ominaisuuksien tutkimukselle.

Water-ethanol mixtures by molecular dynamics and x-ray Compton scattering

Water-ethanol mixtures are commonly used in industry and house holds. However, quite surprisingly their molecular-level structure is still not completely understood. In particular, there is evidence that the local intermolecular geometries depend significantly on the concentration. The aim of this study was to gain information on the molecular-level structures of water-ethanol mixtures by two computational methods. The methods are classical molecular dynamics (MD), where the movement of molecules can be studied, and x-ray Compton scattering, in which the scattering cross section is sensitive to the electron momentum density. Firstly, the water-ethanol mixtures were studied with MD simulations, with the mixture concentration ranging from 0 to 100%. For the simulations well-established force fields were used for the water and ethanol molecules (TIP4P and OPLS-AA, respectively). Moreover, two models were used for ethanol, rigid and non-rigid. In the rigid model the intramolecular bond lengths are fixed, whereas in the non-rigid model the lengths are determined by harmonic potentials. Secondly, mixtures with three different concentrations employing both ethanol models were studied by calculating the experimentally observable x-ray quantity, the Compton profile. In the MD simulations a slight underestimation in the density was observed as compared to experiment. Furthermore, a positive excess of hydrogen bonding with water molecules and a negative one with ethanol was quantified. Also, the mixture was found more structured when the ethanol concentration was higher. Negligible differences in the results were found between the two ethanol models. In contrast, in the Compton scattering results a notable difference between the ethanol models was observed. For the rigid model the Compton profiles were similar for all the concentrations, but for the non-rigid model they were distinct. This leads to two possibilities of how the mixing occurs. Either the mixing is similar in all concentrations (as suggested by the rigid model) or the mixing changes for different concentrations (as suggested by the non-rigid model). Either way, this study shows that the choice of the force field is essential in the microscopic structure formation in the MD simulations. When the sources of uncertainty in the calculated Compton profiles were analyzed, it was found that more statistics needs to be collected to reduce the statistical uncertainty in the final results. The obtained Compton scattering results can be considered somewhat preliminary, but clearly indicative of the behaviour of the water-ethanol mixtures when the force field is modified. The next step is to collect more statistics and compare the results with experimental data to decide which ethanol model describes the mixture better. This way, valuable information on the microscopic structure of water-ethanol mixtures can be found. In addition, information on the force fields in the MD simulations and on the ability of the MD simulations to reproduce the microscopic structure of binary liquids is obtained.

Regio- and stereoselectivity of oxidative coupling reactions of phenols : Spirodienones as construction units in lignin

Dimeric phenolic compounds lignans and dilignols form in the so-called oxidative coupling reaction of phenols. Enzymes such as peroxidases and lac-cases catalyze the reaction using hydrogen peroxide or oxygen respectively as oxidant generating phenoxy radicals which couple together according to certain rules. In this thesis, the effects of the structures of starting materials mono-lignols and the effects of reaction conditions such as pH and solvent system on this coupling mechanism and on its regio- and stereoselectivity have been studied. After the primary coupling of two phenoxy radicals a very reactive quinone me-thide intermediate is formed. This intermediate reacts quickly with a suitable nucleophile which can be, for example, an intramolecular hydroxyl group or another nucleophile such as water, methanol, or a phenolic compound in the reaction system. This reaction is catalyzed by acids. After the nucleophilic addi-tion to the quinone methide, other hydrolytic reactions, rearrangements, and elimination reactions occur leading finally to stable dimeric structures called lignans or dilignols. Similar reactions occur also in the so-called lignification process when monolignol (or dilignol) reacts with the growing lignin polymer. New kinds of structures have been observed in this thesis. The dimeric com-pounds with so-called spirodienone structure have been observed to form both in the dehydrodimerization of methyl sinapate and in the beta-1-type cross-coupling reaction of two different monolignols. This beta-1-type dilignol with a spirodienone structure was the first synthetized and published dilignol model compound, and at present, it has been observed to exist as a fundamental construction unit in lignins. The enantioselectivity of the oxidative coupling reaction was also studied for obtaining enantiopure lignans and dilignols. A rather good enantioselectivity was obtained in the oxidative coupling reaction of two monolignols with chiral auxiliary substituents using peroxidase/H2O2 as an oxidation system. This observation was published as one of the first enantioselective oxidative coupling reaction of phenols. Pure enantiomers of lignans were also obtained by using chiral cryogenic chromatography as a chiral resolution technique. This technique was shown to be an alternative route to prepare enantiopure lignans or lignin model compounds in a preparative scale.

Preparation of Industrially Important Hydroxy Acids and Diacids from 2,2-Disubstituted Propane-1,3-Diols and Linear Primary Diols by Green Chemistry Methods

Environmentally benign and economical methods for the preparation of industrially important hydroxy acids and diacids were developed. The carboxylic acids, used in polyesters, alkyd resins, and polyamides, were obtained by the oxidation of the corresponding alcohols with hydrogen peroxide or air catalyzed by sodium tungstate or supported noble metals. These oxidations were carried out using water as a solvent. The alcohols are also a useful alternative to the conventional reactants, hydroxyaldehydes and cycloalkanes. The oxidation of 2,2-disubstituted propane-1,3-diols with hydrogen peroxide catalyzed by sodium tungstate afforded 2,2-disubstituted 3-hydroxypropanoic acids and 1,1-disubstituted ethane-1,2-diols as products. A computational study of the Baeyer-Villiger rearrangement of the intermediate 2,2-disubstituted 3-hydroxypropanals gave in-depth data of the mechanism of the reaction. Linear primary diols having chain length of at least six carbons were easily oxidized with hydrogen peroxide to linear dicarboxylic acids catalyzed by sodium tungstate. The Pt/C catalyzed air oxidation of 2,2-disubstituted propane-1,3-diols and linear primary diols afforded the highest yield of the corresponding hydroxy acids, while the Pt, Bi/C catalyzed oxidation of the diols afforded the highest yield of the corresponding diacids. The mechanism of the promoted oxidation was best described by the ensemble effect, and by the formation of a complex of the hydroxy and the carboxy groups of the hydroxy acids with bismuth atoms. The Pt, Bi/C catalyzed air oxidation of 2-substituted 2-hydroxymethylpropane-1,3-diols gave 2-substituted malonic acids by the decarboxylation of the corresponding triacids. Activated carbon was the best support and bismuth the most efficient promoter in the air oxidation of 2,2-dialkylpropane-1,3-diols to diacids. In oxidations carried out in organic solvents barium sulfate could be a valuable alternative to activated carbon as a non-flammable support. In the Pt/C catalyzed air oxidation of 2,2-disubstituted propane-1,3-diols to 2,2-disubstituted 3-hydroxypropanoic acids the small size of the 2-substituents enhanced the rate of the oxidation. When the potential of platinum of the catalyst was not controlled, the highest yield of the diacids in the Pt, Bi/C catalyzed air oxidation of 2,2-dialkylpropane-1,3-diols was obtained in the regime of mass transfer. The most favorable pH of the reaction mixture of the promoted oxidation was 10. The reaction temperature of 40°C prevented the decarboxylation of the diacids.

Turvetuotannon luvallistaminen muuttuvassa ympäristössä

Työssä tutkitaan turvetuotannon luvallistamiskysymyksiä luonnonsuojelullisten ja luonnonvarojen käyttöä korostavien tavoitteiden kohtauspinnassa. Tutkielman metodiksi on valikoitunut avoin, keskustelukeskeinen lähestymistapa, joka osoittautui sopivan hyvin tieteellisen tutkimuksen välineeksi. Erityisiä oikeuslähdeopillisia kysymyksiä tarkastellaan tutkimuksessa vain niiltä osin kuin työn muut osat sitä vaativat. Siksi yksittäisiä oikeuslähdeopillisia kysymyksiä ei oteta esille tutkimuksessa kattavasti. Ensimmäisessä varsinaisessa tutkimusjaksossa keskistytään lainsäädäntöhistoriaan. Lainsäädäntöhistoriasta oli löydettävissä sekä luonnonsuojelua että luonnonvarojen käyttämistä tukevia argumentteja, joiden sisältö voidaan melkein suoraan siirtää nykyiseen keskusteluun. Ennen kuin työssä siirrytään varsinaiseen tuotannon luvallistamisen käsittelyyn, siinä luodaan lyhyt katsaus ympäristövaikutusten arviointimenettelyn asemaan. Menettelyllä ei ole laajaa käyttöä turveteollisuudessa. Turveteollisuuden luvallistamiskysymyksiä käsitellään tutkimuksessa kolmessa eri kokonaisuudessa. Ensimmäisessä näistä hahmotetaan luvallistamista alueellisena ja ajallisena kokonaisuutena. Hahmotustapa osoittautui käyttökelpoiseksi ja hyvin turveteollisuuden todellisia oikeudellisia ongelmakohtia vastaavaksi. Keskimmäisessä luvallistamiskysymyksiä tarkastelevista jaksoista keskitytään ajankohtaiseen ongelmaan ilmaston lämpenemisestä. Jaksossa tarkastellaan teoreettista mahdollisuutta huomioida lupamenettelyssä toiminnan vaikutukset ilmastonmuutokselle. Erityisesti tässä jaksossa painottuu tutkimuksen metodin soveltaminen, jonka avulla voidaan ratkaista suhtautuminen tuotannosta esitettyihin, jopa vastakohtaisiin luonnontieteellisiin väitteisiin. Tarkastelussa päädytään siihen, että yksi mahdollinen tulkinta voimassaolevan oikeuden sisällöstä on toiminnan ilmastovaikutusten huomioiminen ympäristölupaharkinnassa. Viimeisimmässä tuotannon luvallistamista käsittelevässä jaksossa tutkimuskohteena on joitain toiminnan osia, joille edellytetään vesilain mukaista lupaa. Tässä jaksossa tutkimuskohteen rajaaminen osoittautui erityisen tärkeäksi, koska vaihtoehtoja tutkimuskohteiksi oli tarjolla runsaasti. Tutkimusalueeseen kuuluvat luvallistamiskysymykset, jotka tulivat vahvimmin esille työn aluksi tehdyissä haastatteluissa. Rajaamalla tutkimuskohde tällä perusteella pysytellään mahdollisimman tiiviisti alkuperäisessä tutkimusasetelmassa. Työn lopuksi käsitellään luvallistamisen suhdetta kaavoitukseen, nimenomaan maakuntakaavoihin ja valtakunnallisiin alueidenkäyttötavoitteisiin, joilla pyritään sääntelemään tuotantoa. Lyhyen katsauksen perusteella päätelmänä on instrumenttien vähäinen tosiasiallinen merkitys.