A formação continuada de professores do ensino superior para a atuação docente on-line: desafios e possibilidades

Pós-graduação em Educação - FCT

Direct-on-line axial flux permanent magnet synchronous generator static and dynamic performance

In distributed energy production, permanent magnet synchronous generators (PMSG) are often connected to the grid via frequency converters, such as voltage source line converters. The price of the converter may constitute a large part of the costs of a generating set. Some of the permanent magnet synchronous generators with converters and traditional separately excited synchronous generators couldbe replaced by direct-on-line (DOL) non-controlled PMSGs. Small directly networkconnected generators are likely to have large markets in the area of distributed electric energy generation. Typical prime movers could be windmills, watermills and internal combustion engines. DOL PMSGs could also be applied in island networks, such as ships and oil platforms. Also various back-up power generating systems could be carried out with DOL PMSGs. The benefits would be a lower priceof the generating set and the robustness and easy use of the system. The performance of DOL PMSGs is analyzed. The electricity distribution companies have regulations that constrain the design of the generators being connected to the grid. The general guidelines and recommendations are applied in the analysis. By analyzing the results produced by the simulation model for the permanent magnet machine, the guidelines for efficient damper winding parameters for DOL PMSGs are presented. The simulation model is used to simulate grid connections and load transients. The damper winding parameters are calculated by the finite element method (FEM) and determined from experimental measurements. Three-dimensional finite element analysis (3D FEA) is carried out. The results from the simulation model and 3D FEA are compared with practical measurements from two prototype axial flux permanent magnet generators provided with damper windings. The dimensioning of the damper winding parameters is case specific. The damper winding should be dimensioned based on the moment of inertia of the generating set. It is shown that the damper winding has optimal values to reach synchronous operation in the shortest period of time after transient operation. With optimal dimensioning, interferenceon the grid is minimized.

On-line teaching and Copyright : Any Hopes for an EU Harmonized Playground?

Education never fails to be mentioned ¿ and, often, mentioned first ¿ as a public interest that justifies an exception to copyright. Educational purposes were already present in the first version of the Berne Convention of 18862 and have remained there (although in revised language) ever since. The WIPO Copyright Treaty of 19963 expressly referred to education in its Preamble, when ¿Recognizing the need to maintain a balance between the rights of authors andthe larger public interest, particularly education, research and access to information, as reflected in the Berne Convention¿ (emphasis added). And morerecently, the EU Directive on Copyright in the Information Society4 stressed its goal ¿to promote learning and culture by protecting works and other subjectmatter while permitting exceptions or limitations in the public interest for the purpose of education and teaching¿ (Recital 14, emphasis added).

Effects of innovative teaching methods on students??? academic performance : an empirical study on financial accounting

Resumen basado en el de la publicaci??n

A simple high-performance liquid chromatography assay for on-line determination of catecholamines in adrenal gland by direct injection on an ISRP column

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Development of a comprehensive on-line multidimensional high performance column liquid chromatography system for protein and peptide mapping with integrated size selective sample fractionation

Aufbau einer kontinuierlichen, mehrdimensionalen Hochleistungs-flüssigchromatographie-Anlage für die Trennung von Proteinen und Peptiden mit integrierter größenselektiver ProbenfraktionierungEs wurde eine mehrdimensionale HPLC-Trennmethode für Proteine und Peptide mit einem Molekulargewicht von <15 kDa entwickelt.Im ersten Schritt werden die Zielanalyte von höhermolekularen sowie nicht ionischen Bestandteilen mit Hilfe von 'Restricted Access Materialien' (RAM) mit Ionenaustauscher-Funktionalität getrennt. Anschließend werden die Proteine auf einer analytischen Ionenaustauscher-Säule sowie auf Reversed-Phase-Säulen getrennt. Zur Vermeidung von Probenverlusten wurde ein kontinuierlich arbeitendes, voll automatisiertes System auf Basis unterschiedlicher Trenngeschwindigkeiten und vier parallelen RP-Säulen aufgebaut.Es werden jeweils zwei RP-Säulen gleichzeitig, jedoch mit zeitlich versetztem Beginn eluiert, um durch flache Gradienten ausreichende Trennleistungen zu erhalten. Während die dritte Säule regeneriert wird, erfolgt das Beladen der vierte Säule durch Anreicherung der Proteine und Peptide am Säulenkopf. Während der Gesamtanalysenzeit von 96 Minuten werden in Intervallen von 4 Minuten Fraktionen aus der 1. Dimension auf die RP-Säulen überführt und innerhalb von 8 Minuten getrennt, wobei 24 RP-Chromatogramme resultieren.Als Testsubstanzen wurden u.a. Standardproteine, Proteine und Peptide aus humanem Hämofiltrat sowie aus Lungenfibroblast-Zellkulturüberständen eingesetzt. Weiterhin wurden Fraktionen gesammelt und mittels MALDI-TOF Massenspektrometrie untersucht. Bei einer Injektion wurden in den 24 RP-Chromatogrammen mehr als 1000 Peaks aufgelöst. Der theoretische Wert der Peakkapazität liegt bei ungefähr 3000.

Using a causal smoothing to improve the performance of an on-line neural network glucose prediction algorithm

This work evaluates a spline-based smoothing method applied to the output of a glucose predictor. Methods:Our on-line prediction algorithm is based on a neural network model (NNM). We trained/validated the NNM with a prediction horizon of 30 minutes using 39/54 profiles of patients monitored with the Guardian® Real-Time continuous glucose monitoring system The NNM output is smoothed by fitting a causal cubic spline. The assessment parameters are the error (RMSE), mean delay (MD) and the high-frequency noise (HFCrms). The HFCrms is the root-mean-square values of the high-frequency components isolated with a zero-delay non-causal filter. HFCrms is 2.90±1.37 (mg/dl) for the original profiles.

O ENSINO DA COMUNICAÇÃO EMPRESARIAL EM MATO GROSSO DO SUL: dificuldades e desafios para incorporar as novas mídias on-line

A comunicação empresarial se desenvolve a passos largos, acompanhando as mudanças ocorridas no mercado, no universo da comunicação e na própria sociedade. A gestão do relacionamento com os públicos de interesse das organizações se tornou mais complexa e faz com que os profissionais da área atentem para as novas realidades do mercado. Em função desse novo cenário, é fundamental a capacitação do profissional para lidar com as mídias sociais, e ela deve se iniciar já no momento de sua formação universitária. Para a pesquisa bibliográfica, utilizamos como principais autores Bueno (2009), Scott (2008; 2011) e Terra (2011).Por serem assuntos relativamente novos, foram realizadas, ainda, entrevistas semiestruturadas com autores/pesquisadores da área para verificar as situações ideais do ensino da comunicação organizacional atuais. Com objetivo de apresentarmos as condições, percepções e desafios da formação do profissional da comunicação de Mato Grosso do Sul para trabalhar com a comunicação empresarial, foram feitas entrevistas semiestruturadas com os professores das faculdades e fechadas com os acadêmicos, de forma que demos atenção especial para seus conhecimentos e suas práticas nesses novos ambientes de interação. Dentre os resultados encontrados estão a necessidade da formação ampla do profissional com conhecimento da área da comunicação e organizações e a conclusão que essa formação integral garante à atuação dele em qualquer mídia/ferramenta.

Effects of two teaching strategies on the relationship between nursing students’ self-efficacy and performance in BLS/AED

Purpose: Nurses and nursing students are often first responders to in-hospital cardiac arrest events; thus they are expected to perform Basic Life Support (BLS) and use an automated external defibrillator (AED) without delay. The aim of this study was to explore the relationship between nursing students’ self-efficacy and performance before and after receiving a particular training intervention in BLS/AED. Materials and methods: Explanatory correlational study. 177 nursing students received a 4-h training session in BLS/AED after being randomized to either a self-directed (SDG) or an instructor-directed teaching group (IDG).1 A validated self-efficacy scale, the Cardiff Test and Laerdal SkillReporter® software were used to assess students’ self-efficacy and performance in BLS/AED at pre-test, post-test and 3-month retention-test. Independent t-test analysis was performed to compare the differences between groups at pre-test. Pearson coefficient (r) was used to calculate the strength of the relationship between self-efficacy and performance in both groups at pre-test, post-test and retention-test. Results: Independent t-tests analysis showed that there were non-significant differences (p-values > 0.05) between groups for any of the variables measured. At pre-test, results showed that correlation between self-efficacy and performance was moderate for the IDG (r = 0.53; p < 0.05) and the SDG (r = 0.49; p < 0.05). At post-test, correlation between self-efficacy and performance was much higher for the SDG (r = 0.81; p < 0.05) than for the IDG (r = 0.32; p < 0.05), which in fact was weaker than at pre-test. Finally, it was found that whereas the correlation between self-efficacy and performance increased from the post-test to the retention-test to almost reach baseline levels for the ILG (r = 0.52; p < 0.05), it slightly decreased in this phase for the SDG (r = 0.77; p < 0.05). Conclusion: Student-directed strategies may be more effective than instructor-directed strategies at promoting self-assessment and, therefore, may help to improve and maintain the relationship between nursing student self-efficacy and actual ability to perform BLS/AED.

Issues in On-Line Legal Translation Teaching

A description is given of the structure of, theoretical background of, and experiences gained from, a course in legal English-Spanish translation taught at the University of Alicante.

On-line identification of minor flavones from sugarcane juice by LC/UV/MS and post-column derivatization

This work describes the on-line characterization of minor flavones from sugarcane (Saccharum officinarum) juice by high-performance liquid chromatography coupled to diode array UV detection and mass spectrometry (LC/UV/MS) using atmospheric pressure chemical ionization-collision-induced dissociation (APCI-CID-MS/MS) and post-column derivatization using UV shift reagents. HPLC-UV analysis with shift reagents provided information about the substitution pattern in the flavonoid skeleton and, combined with MS data, these techniques allowed for the on-line identification of five "garapa" flavones: luteolin-8-C-glucosyl-7-O-glucuronide; tricin-7-O-neohesperoside-4'-O-rhamnoside; tricin-7-O-methylglucuronate-4'-O-rhamnoside; tricin-7-O-methylglucuronide; swertisin, while four other compounds were partially identified as glycosylflavones. Only swertisin (7-O-methylapigenin-6-C-glucoside) was reported previously in sugarcane molasses.

On-line fault diagnostic system for proton exchange membrane fuel cells

In this paper, a supervisor system, able to diagnose different types of faults during the operation of a proton exchange membrane fuel cell is introduced. The diagnosis is developed by applying Bayesian networks, which qualify and quantify the cause-effect relationship among the variables of the process. The fault diagnosis is based on the on-line monitoring of variables easy to measure in the machine such as voltage, electric current, and temperature. The equipment is a fuel cell system which can operate even when a fault occurs. The fault effects are based on experiments on the fault tolerant fuel cell, which are reproduced in a fuel cell model. A database of fault records is constructed from the fuel cell model, improving the generation time and avoiding permanent damage to the equipment. (C) 2007 Elsevier B.V. All rights reserved.

On-line analysis of froth surface in coal and mineral flotation using JKFrothCam

The personal computer revolution has resulted in the widespread availability of low-cost image analysis hardware. At the same time, new graphic file formats have made it possible to handle and display images at resolutions beyond the capability of the human eye. Consequently, there has been a significant research effort in recent years aimed at making use of these hardware and software technologies for flotation plant monitoring. Computer-based vision technology is now moving out of the research laboratory and into the plant to become a useful means of monitoring and controlling flotation performance at the cell level. This paper discusses the metallurgical parameters that influence surface froth appearance and examines the progress that has been made in image analysis of flotation froths. The texture spectrum and pixel tracing techniques developed at the Julius Kruttschnitt Mineral Research Centre are described in detail. The commercial implementation, JKFrothCam, is one of a number of froth image analysis systems now reaching maturity. In plants where it is installed, JKFrothCam has shown a number of performance benefits. Flotation runs more consistently, meeting product specifications while maintaining high recoveries. The system has also shown secondary benefits in that reagent costs have been significantly reduced as a result of improved flotation control. (C) 2002 Elsevier Science B.V. All rights reserved.