Iowa Pavement Asset Management Decision-Making Framework & Pavement Treatment Selection Tool for Local Agencies, TR-651, 2015

Most local agencies in Iowa currently make their pavement treatment decisions based on their limited experience due primarily to lack of a systematic decision-making framework and a decision-aid tool. The lack of objective condition assessment data of agency pavements also contributes to this problem. This study developed a systematic pavement treatment selection framework for local agencies to assist them in selecting the most appropriate treatment and to help justify their maintenance and rehabilitation decisions. The framework is based on an extensive literature review of the various pavement treatment techniques in terms of their technical applicability and limitations, meaningful practices of neighboring states, and the results of a survey of local agencies. The treatment selection framework involves three different steps: pavement condition assessment, selection of technically feasible treatments using decision trees, and selection of the most appropriate treatment considering the return-on-investment (ROI) and other non-economic factors. An Excel-based spreadsheet tool that automates the treatment selection framework was also developed, along with a standalone user guide for the tool. The Pavement Treatment Selection Tool (PTST) for Local Agencies allows users to enter the severity and extent levels of existing distresses and then, recommends a set of technically feasible treatments. The tool also evaluates the ROI of each feasible treatment and, if necessary, it can also evaluate the non-economic value of each treatment option to help determine the most appropriate treatment for the pavement. It is expected that the framework and tool will help local agencies improve their pavement asset management practices significantly and make better economic and defensible decisions on pavement treatment selection.

Review of investment strategy, portfolio management, and scorecard based portfolio selection tool for direct property investments in Finland

The lack of research of private real estate is a well-known problem. Earlier studies have mostly concentrated on the USA or the UK. Therefore, this master thesis offers more information about the performance and risk associated with private real estate investments in Nordic countries, but especially in Finland. The structure of this master thesis is divided into two independent sections based on the research questions. In first section, database analysis is performed to assess risk-return ratio of direct real estate investment for Nordic countries. Risk-return ratios are also assessed for different property sectors and economic regions. Finally, review of diversification strategies based on property sectors and economic regions is performed. However, standard deviation itself is not usually sufficient method to evaluate riskiness of private real estate. There is demand for more explicit assessment of property risk. One solution is property risk scoring. In second section risk scorecard based tool is built to make different real estate comparable in terms of risk. In order to do this, nine real estate professionals were interviewed to enhance the structure of theory-based risk scorecard and to assess weights for different risk factors.

A Multi-Criteria GIS-Based Route Selection Tool for Hazardous Material Transport: Consideration of Environmental Consequence, Traffic Congestions and Costs

Hazardous materials are substances that, if not regulated, can pose a threat to human populations and their environmental health, safety or property when transported in commerce. About 1.5 million tons of hazardous material shipments are transported by truck in the US annually, with a steady increase of approximately 5% per year. The objective of this study was to develop a routing tool for hazardous material transport in order to facilitate reduced environmental impacts and less transportation difficulties, yet would also find paths that were still compelling for the shipping carriers as a matter of trucking cost. The study started with identification of inhalation hazard impact zones and explosion protective areas around the location of hypothetical hazardous material releases, considering different parameters (i.e., chemicals characteristics, release quantities, atmospheric condition, etc.). Results showed that depending on the quantity of release, chemical, and atmospheric stability (a function of wind speed, meteorology, sky cover, time and location of accidents, etc.) the consequence of these incidents can differ. The study was extended by selection of other evaluation criteria for further investigation because health risk as an evaluation criterion would not be the only concern in selection of routes. Transportation difficulties (i.e., road blockage and congestion) were incorporated as important factor due to their indirect impact/cost on the users of transportation networks. Trucking costs were also considered as one of the primary criteria in selection of hazardous material paths; otherwise the suggested routes would have not been convincing for the shipping companies. The last but not least criterion was proximity of public places to the routes. The approach evolved from a simple framework to a complicated and efficient GIS-based tool able to investigate transportation networks of any given study area, and capable of generating best routing options for cargos. The suggested tool uses a multi-criteria-decision-making method, which considers the priorities of the decision makers in choosing the cargo routes. Comparison of the routing options based on each criterion and also the overall suitableness of the path in regards to all the criteria (using a multi-criteria-decision-making method) showed that using similar tools as the one proposed by this study can provide decision makers insights in the area of hazardous material transport. This tool shows the probable consequences of considering each path in a very easily understandable way; in the formats of maps and tables, which makes the tradeoffs of costs and risks considerably simpler, as in some cases slightly compromising on trucking cost may drastically decrease the probable health risk and/or traffic difficulties. This will not only be rewarding to the community by making cities safer places to live, but also can be beneficial to shipping companies by allowing them to advertise as environmental friendly conveyors.

Body condition score of Nellore beef cows: a heritable measure to improve the selection of reproductive and maternal traits

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modelo de seleção de fornecedores baseado em dados reais – plataforma informática e dados de suporte ao modelo

Atualmente, as estratégias que as empresas optam por seguir para a maximização de recursos materiais e humanos, podem representar a diferença entre o sucesso e o fracasso. A seleção de fornecedores é um fator bastante crítico para o desempenho da empresa compradora, sendo por vezes necessária a resolução de problemas que apresentam um elevado grau de complexidade. A escolha dos métodos a ser utilizados e a eleição dos critérios mais relevantes foi feito com base no estudo de diversos autores e nas repostas obtidas a um inquérito online difundido por uma amostra de empresas portuguesas, criado especificamente para compreender quais os fatores que mais peso tinham nas decisões de escolha de parceiros. Além disso, os resultados adquiridos desta forma foram utilizados para conceder mais precisão às ponderações efetuadas na ferramenta de seleção, na escolha dos melhores fornecedores introduzidos pelos utilizadores da mesma. Muitos estudos literários propõem o uso de métodos para simplificar a tarefa de seleção de fornecedores. Esta dissertação aplica o estudo realizado nos métodos de seleção, nomeadamente o Simple Multi-Attribute Rating Technique (SMART) e Analytic Hierarchy Process (AHP), necessários para o desenvolvimento de uma ferramenta de software online que permitia, a qualquer empresa nacional, obter uma classificação para os seus fornecedores perante um conjunto de critérios e subcritérios.

Susceptibilidade genética para cancro da mama

RESUMO: O cancro da mama é a patologia oncológica mais frequente nas mulheres sendo o responsável pela maior taxa de mortalidade por cancro no sexo feminino. Contudo, as causas inerentes a esta patologia permanecem por esclarecer. Nos últimos anos tem-se verificado que o risco para patologia neoplásica depende de factores ambientais e genéticos, estando estes últimos associados à variabilidade genética inter-individual. Polimorfismos genéticos em genes envolvidos no metabolismo de hormonas sexuais, de cancerígenos ambientais e na reparação da lesão genética, são potenciais candidatos a estarem associados à susceptibilidade individual para esta patologia. Assim, neste trabalho desenvolveram-se estudos de associação caso-controlo na população Portuguesa, com vista a avaliar-se o papel atribuído aos polimorfismos na susceptibilidade para cancro da mama. Foram seleccionados polimorfismos em genes envolvidos em diferentes vias mecanicistas: destoxificação de cancerígenos, metabolismo de estrogénios, reparação por excisão de bases, reparação por excisão de nucleótidos, reparação mismatch e reparação por recombinação homóloga. Os resultados obtidos revelaram associação entre os seguintes polimorfismos e a susceptibilidade individual para cancro da mama: os dois SNPs estudados no gene XRCC1 (Arg194Trp e Arg399Gln) e o SNP no gene XRCC3 (Thr241Met) após estratificação pelo status menopausico. Mediante estratificação por status de amamentação os SNPs identificados nos genes MnSOD (Val16Ala) e XRCC2 (Arg118His); um SNP no gene MLH3 (Leu844Pro), e por fim como resultado de interacção gene-gene as interacções descritas por MSH3 Ala1045Thr/MSH6 Gly39Glu e MSH4 Ala97Thr/MLH3 Leu844Pro. Os resultados obtidos e apresentados na presente dissertação, revelam que o estudo de polimorfismos pode representar um papel determinante na etiologia do cancro da mama. No entanto, mais estudos envolvendo estes mesmos polimorfismos em populações casuisticamente superiores serão uma mais-valia nos estudos de associação para esta neoplasia. Adicionalmente, a utilização da metodologia de Pools de DNA, poderá ser uma ferramenta útil na pré-selecção dos polimorfismos mais relevantes a estudar, na medida em que permite estimar a frequência alélica de cada SNP numa determinada população.-----------------------------------ABSTRACT: Breast cancer is the most common form of cancer among women, being the responsible for the highest mortality rate from cancer among the female sex. However, the main causes related to this pathology remain unclear. The risk of neoplasic disease has been connected with genetic and environmental factors. In fact, genes and the environment share the stage for most, if not all, common non-familial cancers, and are related to individual susceptibility. Genetic polymorphisms identified in genes encoding enzymes involved in estrogen metabolism, xenobiotics and DNA repair pathways are believed to be candidates for associations with breast cancer. Therefore, it was our intention to develop case-control studies among the Portuguese population, in order to evaluate the potential role of several genetic polymorphisms in breast cancer susceptibility. We selected polymorphisms in genes involved in different pathways: carcinogenic detoxification, estrogen metabolism, base excision repair, nucleotide excision repair, mismatch repair and double strand break repair by homologous recombination. The results obtained revealed potential associations between some polymorphisms studied and individual susceptibility to breast cancer. Regarding this fact, our results suggest the potential involvement of two XRCC1 gene polymorphisms (Arg194Trp and Arg399Gln) and XRCC3 gene polymorphism (Thr241Met) after stratification to menopausal status and after stratification to breastfeeding status an association of MnSOD gene polymorphism (Val16Ala) and XRCC2 (Arg188His) with the disease. The SNP identified in MLH3 gene (Leu844Pro), and the interaction gene-gene described by MSH3 Ala1045Thr/MSH6 Gly39Glu and MSH4 Ala97Thr/MLH3 Leu844Pro were also related to breast cancer susceptibility. The results shown in the present dissertation have revealed the potential role of polymorphisms in breast cancer etiology. However, further studies will be needed with larger populations to confirm these results. Additionally, the use of DNA pools methodology, as a pre-selection tool, could allow the identification of the most relevant polymorphisms to be studied, estimating the allelic frequency of each SNPs in different populations.

Toimitusvarmuus, laatu ja kustannus toimittajanvalintakriteereinä: Case Fenestra O

Tutkimuksen tavoite oli selvittää toimitusvarmuutta, laatua ja kustannusta toimittajanvalintakriteereinä karmiaihionprosessin mukaisesti. Näitä tutkittiin selvittämällä vallitsevaa tutkimusta, jonka avulla perehdyttiin mainitun prosessin eri vaiheiden tarvitsemiin toimittajanvalintakriteereihin. Samalla muodostettiin case-yrityksen tarpeisiin toimittajanvalintakriteerit sekä toimittajan arviointilomake. Toimitusvarmuutta, laatua ja kustannusta on selvitetty aikasemmissa tutkimuksissa toimittajanvalintakriteereinä ja ne ovat tärkeitä myös tämän tutkimuksen case-yritykselle. Valmistettavan karmiaihion valmistusprosessi avasi uudenlaisen näkökulman valittuihin kriteereihin. Karmiaihion valmistusprosessin alussa toimittajalta edellytettiin paljon eri ominaisuuksia. Jalostusasteen kasvaminen korosti laatuun ja kyvykkyyteen liittyviä toimittajanvalintakriteereitä. Lisäksi toimialakohtaisia erityisiä kriteereitä kyettiin muodostamaan, jonka mukaan toimittajanvalintakriteerit jakaantuvat yleisiin ja erityisiin toimialakohtaisiin kriteereihin.

International survey of acute stroke imaging used to make revascularization treatment decisions.

BACKGROUND: To assess the differences across continental regions in terms of stroke imaging obtained for making acute revascularization therapy decisions, and to identify obstacles to participating in randomized trials involving multimodal imaging. METHODS: STroke Imaging Repository (STIR) and Virtual International Stroke Trials Archive (VISTA)-Imaging circulated an online survey through its website, through the websites of national professional societies from multiple countries as well as through email distribution lists from STIR and the above mentioned societies. RESULTS: We received responses from 223 centers (2 from Africa, 38 from Asia, 10 from Australia, 101 from Europe, 4 from Middle East, 55 from North America, 13 from South America). In combination, the sites surveyed administered acute revascularization therapy to a total of 25,326 acute stroke patients in 2012. Seventy-three percent of these patients received intravenous (i.v.) tissue plasminogen activator (tPA), and 27%, endovascular therapy. Vascular imaging was routinely obtained in 79% (152/193) of sites for endovascular therapy decisions, and also as part of standard IV tPA treatment decisions at 46% (92/198) of sites. Modality, availability and use of acute vascular and perfusion imaging before revascularization varied substantially between geographical areas. The main obstacles to participate in randomized trials involving multimodal imaging included: mainly insufficient research support and staff (50%, 79/158) and infrequent use of multimodal imaging (27%, 43/158) . CONCLUSION: There were significant variations among sites and geographical areas in terms of stroke imaging work-up used tomake decisions both for intravenous and endovascular revascularization. Clinical trials using advanced imaging as a selection tool for acute revascularization therapy should address the need for additional resources and technical support, and take into consideration the lack of routine use of such techniques in trial planning.

Partner Criteria and Life Cycle Impacts: Case UPM

The study examines partner selection criteria and the life cycle impacts on them. The target is to define the relevant criteria that should be applied in case of a partnership. In this context partnership means strategic supplier relationship. It is also examined how these criteria change on the different stages of the product and business life cycle. The empirical part is a description of developing Criteria selection tool in the case company. The study is conducted as a qualitative research using constructive and action research methodologies. The Criteria selection tool is a MS Excel workbook, giving the relevant set of supplier criteria depending on the business case. The most essential criteria, the tool will suggest for partner suppliers, are related to strategic fit, development potential and collaborative aspects. On the early stages of the life cycles the criteria related to research and development and growth potential are significant. On the late stages of the life cycles cost reduction potential becomes very important.

On the Efficiency of Alternatives in Process Plans

Process planning is a very important industrial activity, since it determines how a part or a product is manufactured. Process planning decisions include machine selection, tool selection, and cutting conditions determination, and thus it is a complex activity. In the presence of unstable demand, flexibility has become a very important characteristic of today's successful industries, for which Flexible Manufacturing Systems (FMSs) have been proposed as a solution. However, we believe that FMS control software is not flexible enough to adapt to different manufacturing system conditions aiming at increasing the system's efficiency. One means to overcome this limitation is to include pre-planned alternatives in the process plan; then planning decisions are made by the control system in real time to select the most appropriate alternative according to the conditions of the shop floor. Some of the advantages of this approach reported in the literature are the reduction of the number of tool setups, and the selection of a replacement machine for executing an operation. To verify whether the presence of alternatives in process plans actually increases the efficiency of the manufacturing system, an investigation was carried out using simulation and design of experiments techniques for alternative plans on a single machine. The proposed methodology and the results are discussed within this paper.

Introducción de la metodología análisis modal de fallos y efectos (AMFE) como herramienta de gestión en una ese del distrito capital de II nivel

El presente trabajo expone la elaboración de un proceso sistemático para la identificación y clasificación de modos de fallo utilizando la metodología ANÁLISIS MODAL DE FALLOS Y EFECTOS (AMFE), como un procedimiento de gran utilidad para mejorar la calidad y seguridad de la prestación de servicios asistenciales. Se analizaron 254 modos de fallo, en el servicio de urgencias de una ESE de II Nivel del Distrito Capital, se utilizó una herramienta de selección de procesos denominada Matriz de Priorización utilizada por el Centro de Gestión Hospitalaria con algunas adaptaciones de acuerdo con las necesidades institucionales. Se calificaron 227 de ellos correspondiendo a un 89,37%. Se entrevistaron 48 médicos, 27 enfermeras, 27 auxiliares de enfermería y 9 camilleros, para un total de 111 colaboradores que corresponden al 30% del total del personal del servicio de urgencias. Se generó una hoja de control de calidad (aceptación) del ejercicio con un porcentaje total del 85%, teniendo como resultado que 102 personas de las 111 encuestadas, diligenciaron correctamente la totalidad de los campos del formato AMFE. Se buscó Implementar el uso de la metodología AMFE como herramienta de gestión y mejora de procesos institucionales, realizando una prueba piloto al proceso seleccionado y evaluando si esta metodología se podía aplicar a otros procesos asistenciales. Se observó que de la totalidad de los modos de fallo el mayor valor de criticidad se encontró en el rango de 45 puntos. Se determinaron 11 modos de fallos en esta categoría, los cuales se encuentran dos asociados dos están asociados con el acceso del paciente a la institución, siete relacionados con el Registro e Ingreso del usuario, uno relacionado con la planeación de la atención y dos relacionados con la ejecución del tratamiento. Palabras claves: Análisis Modal De Fallos y Efectos (AMFE), urgencias, mejora continua.

Estrategias de internacionalización para los TLC

En este documento se presenta toda la propuesta para iniciar el proceso de internacionalización de la empresa Estopas e hilazas de Colombia, a través de 5 etapas desarrolladas por el CIDEM.

Como inserir um arquivo de áudio no software Acid Xpress

O professor, sentado diante de um computador, demonstra como inserir um arquivo de áudio na Timeline (linha do tempo) do software Acid Xpress. Basta localizar o arquivo em seu computador utilizando o Painel de exploração e arrastá-lo até a Timeline, onde irá soltá-lo. Em seguida o professor demonstra as ferramentas de “Zoom (para visualização das ondas sonoras)”, “Borracha”, “Draw tool (lápis)”, “Time selection tool (ferramenta de seleção de tempo)” do software, explicando suas funcionalidades. Encerra demonstrando como mover o arquivo de áudio na Timeline e também como encurtá-lo ou esticá-lo novamente.

Motile sperm organelle morphology examination is stricter than Tygerberg criteria

The present study aimed to evaluate the correlation between the motile sperm organelle morphology examination (MSOME) and a well-known sperm morphology classification (Tygerberg criteria). For MSOME, spermatozoa were analysed at x8400 magnification by inverted microscope equipped with Nomarski differential interference contrast optics, Uplan Apo x 100 oil/1.35 objective lens and variable zoom lens. By Tygerberg criteria, the semen underwent morphological evaluation as described in the literature. Regression analysis demonstrated significant positive correlation between percentage of normal sperm forms by Tygerberg criteria and by MSOME (r = 0.83, P < 0.0001). However, the incidence of normal spermatozoa by Tygerberg criteria (9.4%) was significantly higher (P < 0.0001) than under MSOME (3.3%). Despite the highly positive correlation, MSOME is a much stricter criterion of sperm morphology classification, since it identifies vacuoles and chromatin abnormalities that are not evaluated with the same precision by the analysis of Tygerberg criteria. MSOME should be included among the routine criteria for semen analysis. In addition, MSOME should be used for selection of spermatozoa for intracytoplasmic sperm injection based on the already published literature, as this is a good selection tool.

The embAB genes of Mycobacterium avium encode an arabinosyl transferase involved in cell wall arabinan biosynthesis that is the target for the antimycobacterial drug ethambutol.

The antimycobacterial compound ethambutol [Emb; dextro-2,2'-(ethylenediimino)-di-1-butanol] is used to treat tuberculosis as well as disseminated infections caused by Mycobacterium avium. The critical target for Emb lies in the pathway for the biosynthesis of cell wall arabinogalactan, but the molecular mechanisms for drug action and resistance are unknown. The cellular target for Emb was sought using drug resistance, via target overexpression by a plasmid vector, as a selection tool. This strategy led to the cloning of the M. avium emb region which rendered the otherwise susceptible Mycobacterium smegmatis host resistant to Emb. This region contains three complete open reading frames (ORFs), embR, embA, and embB. The translationally coupled embA and embB genes are necessary and sufficient for an Emb-resistant phenotype which depends on gene copy number, and their putative novel membrane proteins are homologous to each other. The predicted protein encoded by embR, which is related to known transcriptional activators from Streptomyces, is expendable for the phenotypic expression of Emb resistance, but an intact divergent promoter region between embR and embAB is required. An Emb-sensitive cell-free assay for arabinan biosynthesis shows that overexpression of embAB is associated with high-level Emb-resistant arabinosyl transferase activity, and that embR appears to modulate the in vitro level of this activity. These data suggest that embAB encode the drug target of Emb, the arabinosyl transferase responsible for the polymerization of arabinose into the arabinan of arabinogalactan, and that overproduction of this Emb-sensitive target leads to Emb resistance.