Globaalin hankintastrategian komponentit, case: Joptek Oy Composites

Viimeiset vuosikymmenet ovat olleet voimakasta kansainvälistymisen aikaa liiketoiminnassa, jonka myötä globaalista hankinnasta on tullut yhä enenevässä määrin hyvin merkittävä osa yritysten hankintastrategiaa. Kansainvälisten hankintapäätösten tekeminen vaatii yritykseltä kansainvälistymisen asteesta riippuen taloudellisia-, ajallisia- ja henkilöresursseja. Suhteessa näihin panoksiin nähden kansainvälisestä hankinnasta on saavutettavissa merkittäviä etuja, joista tärkeimpiä ovat kustannussäästöt, kilpailuetu sekä laatu- ja teknologiaedut. Projektiluontoisessa liiketoiminnassa hankintastrategian muodostamiseen ja hankintaprosesseihin vaikuttavat yksittäisten projektien ominaisuudet ja niille asetetut tavoitteet. Projektitoiminnassa hankintastrategian mukauttaminen kulloinkin vallitseviin olosuhteisiin, tavoitteisiin ja asiakkaiden tarpeisiin on projektien onnistumisen kannalta tärkeää. Tutkielman teoriaosassa tarkasteltiin projektihankintaprosesseja sekä projekteihin perustuvan liiketoiminnan ominaispiirteitä ja niiden vaikutuksia hankintaan. Teorian keskeisimpänä asiakokonaisuutena on kansain-välinen hankintastrategia osana yrityksen kokonaisvaltaista hankinta-strategiaa. Globaalia hankintastrategiaa on tarkasteltu investointien, kilpailuedun, strategian muodostuksen, motiivien ja esteiden sekä sen eri komponenttien osalta. Empiiriaosassa tutkittiin tutkielman case –yrityksen ja toimeksiantajan, Joptek Oy Compositesin hankinnan nykytilaa sekä kansainvälisen hankintastrategian eri osa-alueita. Haastattelun avulla suoritetun tutkimuksen mukaan Joptek Oy:n liiketoimintaympäristö edellyttää yrityksen entistä aktiivisempaa panostamista kansainväliseen hankintaan. Projektiliiketoiminnassa kansainvälisen hankintastrategian muodostamisessa on pyrittävä yrityksen tarpeisiin vastaaviin räätälöityihin ratkaisuihin, huomioiden erillisten projektien muutokset ja riskitekijät.

Learning across business sectors: facets of innovation in aerospace and construction

Innovation is notoriously difficult to define and is invariably intertwined with issues of knowledge creation, continuous improvement and organisational change. An extensive literature classifies numerous types of innovation and militates against any simplistic attempt at definition. It is widely accepted that innovation is at least partly dependent upon the surrounding environment. Industry recipes and institutionally embedded practices shape the environment within which innovation occurs. Recent research directions have addressed the diffusion of innovation and its dependence upon social and institutional structures. In this respect, it is highly pertinent to compare the way that innovation is interpreted and enacted in different industrial sectors. The comparison between UK aerospace and construction is especially revealing because the two sectors are so different and therefore constitute radically different climates for innovation. Empirical research is reported based on semi-structured interviews with practitioners from both sectors. Interpretations of innovation are found to differ dramatically between aerospace and construction. Within the context of an ongoing struggle to define innovation, both industries are striving to become more innovative. The aerospace sector is found to emphasise technical innovation whereas the construction sector emphasises process innovation. An overriding cultural bias in Western economies towards technological innovation results in the common perception that aerospace is much more innovative than construction. The experienced realities of practitioners in the two sectors are much more complex.

Procurement in Project Implementation

Tutkimus keskittyy hankintatoimen kehittämiseen osana laitosprojektien toteutusta. Työ pohjautuu empiiriseltä taustaltaan Pöyry Oyj:n projektiliiketoimintaan ja työn tarkastelunäkökulmaksi onvalittu projektihallinnosta vastaavan yrityksen näkökulma. Tutkimus on hyvin käytännönläheinen ¿ se lähtee hankinnan ja sen seurannan ongelmista ja pyrkii tarjoamaan niihin uudenlaisia ratkaisuja. Pohjimmiltaan tutkimus kuuluu teollisuustalouden piiriin, vaikka tietojärjestelmätieteellä on vahva tukirooli. Työn tavoitteet ja tulokset liittyvät teollisuustaloudelle ominaisesti yrityksen toiminnan kehittämiseen, käytetyt välineet ja ratkaisut puolestaan hyödyntävät tietojärjestelmätieteen antamia mahdollisuuksia. Tutkimuksessa on käytetty konstruktiivista tutkimusotetta, jonka mukaisesti on luotu innovatiivisia konstruktioita ratkaisemaan aitoja reaalimaailman ongelmia ja tätä kautta tuotettu kontribuutioita teollisuustaloudelle. Tavoitteena oli järjestää hankintatoimi ja sen seuranta suurissa laitosprojekteissa tehokkaammin. Tätä varten uudistettiin ensin projektihallinnon ja hankintatoimen toimintaohjeet vastaamaan paremmin nykyajan vaatimuksia. Toimintaohjeiden perusteella ryhdyttiin toteuttamaan hankintaohjelmistoa, joka pystyisi kattamaan kaikki toimintaohjeissa kuvatut piirteet. Lopulta hankintaohjelmisto toi mukanaan uusia piirteitä projektihallintoon ja hankintatoimeen ja nämä sisällytettiin toimintaohjeisiin. Tähän kehitystyöhön ryhdyttiin, jotta laitosprojektien projektihallinto ja hankintatoimi toimisivat paremmin, eli pienemmin kustannuksin tuottaen projekteissa tarvittavat tulokset nopeammin, tarkemmin ja laadukkaammin. Tutkimuksella on kolmenlaisia tuloksia: hankintatoimen parannetut metodit, hankintaohjelmiston pohjana olevat toiminta- ja laskentamallit sekä implementaationa hankintasovellus. Uudistetut projekti- ja hankintaohjeet kuvaavat hankintatoiminnan parannettuja metodeja. Hankintaohjelmistoasuunnitellessa ja kehitettäessä tehdyt kuvaukset sisältävät uusia malleja niin hankintaprosessille kuin hankinnan seuraamiseksi suurissa laitosprojekteissa. Itse ohjelmisto on tuloksena implementaatio, joka perustuu parannettuihin hankintametodeihin ja uusiin toiminta- ja laskentamalleihin. Uudistetut projekti- ja hankintaohjeet ovat olleet käytössä Pöyry Oyj:ssä vuodesta 1991. Vuosien varrella nämä toimintaohjeet ovat auttaneet ja tukeneet satojen laitosprojektientoteutusta ja ylläpitäneet Pöyry Oyj:n kilpailukykyä kansainvälisenä projektitalona. Hankintasovellus puolestaan on ollut käytössä useissa projekteissa ja sen on havaittu pienentävän hankintatoimen suoria työkustannuksia laitosprojekteissa. Sovelluksen katsotaan myös tuovan epäsuoria kustannussäästöjä parempien hankintapäätösten muodossa, mutta näiden säästöjen suuruutta ei pystytä luotettavasti arvioimaan.

Development of Project Logistics in Engineering, Procurement and Construction Projects

The aim of this Master’s Thesis is to develop project logistics functions in large scale en-gineering, procurement and construction projects. The background of the research topic is compounded from two separate subjects; OPAL Program and case study of an actual EPC project. The purpose is to examine Project Logistics process in accordance with OPAL Program as well as logistics process in focus EPC project. Both entities are researched by using the case study research methodology. Logistics process of the focus EPC project is described as well as presented and in addi-tion, logistics related findings and observations are introduced. Significant findings and observations are found from logistics costs as well as shipment volume estimations in the early phase of the focus ECP project. A notable finding is also that because goods were transported as readily assembled as possible it caused expensive oversized cargo deliveries. From findings and observation of the focus EPC project it can be derived that logistics has to be involved in the early sales phase in order to receive more accurate logistics cost esti-mations for project deliveries. It is also noticed that in order to obtain savings in logistics costs, oversized deliveries must be avoided.

Public Procurement in the Transatlantic Trade and Investment Partnership Negotiations. Paper No. 2 in the CEPS-CTR project "TTIP in the Balance" and CEPS Special Report No. 100/February 2015

For more than 20 years, the United States and the European Union have engaged in often-contentious negotiations over access to government procurement. The EU is dissatisfied with the level of procurement that the US has opened under the WTO Government Procurement Agreement and, as a consequence, it does not give the US its most comprehensive coverage. The US has been constrained in responding to the EU’s requests for greater access, especially to state procurement, by both its federal structure of government and by domestic purchasing requirements. At the current time, neither party has proposed a way to break the impasse. This paper reviews the current state of affairs between the US and the EU on government procurement, examining the procurement that they open to one another and the procurement that they withhold. It then proposes a strategy for the two sides to use the TTIP negotiations to move forward. This strategy includes both steps to expand their current commitments in the TTIP, as well as to develop a longer-term approach by making the TTIP a ‘living agreement’. This strategy suggests that the EU and the US could find a way to expand their access to government procurement contracts and at least partially defuse the issue.

Procurement strategies in the health sector: How advanced are procurement processes in Portuguese hospitals

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Evolution in public procurement and the impact of e-procurement platforms: A case study

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Competition and cost overruns. Optimal misspecification of procurement contracts

Most cases of cost overruns in public procurement are related to important changes in the initial project design. This paper deals with the problem of design specification in public procurement and provides a rationale for design misspecification. We propose a model in which the sponsor decides how much to invest in design specification and awards competitively the project to a contractor. After the project has been awarded the sponsor engages in bilateral renegotiation with the contractor, in order to accommodate changes in the initial project s design that new information makes desirable. When procurement takes place in the presence of horizontally differentiated contractors, the design s specification level is seen to affect the resulting degree of competition. The paper highlights this interaction between market competition and design specification and shows that the sponsor s optimal strategy, when facing an imperfectly competitive market supply, is to underinvest in design specification so as to make significant cost overruns likely. Since no such misspecification occurs in a perfectly competitive market, cost overruns are seen to arise as a consequence of lack of competition in the procurement market.

Competition and cost overruns in procurement

Most cases of cost overruns in public procurement are related to important changes in theinitial project design. This paper deals with the problem of design speciffication in public procurement and provides a rationale for design misspeciffication. We propose a model in which the sponsor decides how much to invest in design speciffication and awards competitively the project to a contractor. After the project has been awarded the sponsor engages in bilateral renegotiation with the contractor, in order to accommodate changes in the initial project's design that new information makes desirable. When procurement takes place in the presence of horizontally differentiated contractors, the design's speciffication level is seen to affect the resulting degree of competition. The paper highlights this interaction between market competition and design speciffication and shows that the sponsor's optimal strategy, when facing an imperfectly competitive market supply, is to underinvest in design speciffication so as to make signifficant cost overrunslikely. Since no such misspeciffication occurs in a perfectly competitive market, cost overruns are seen to arise as a consequence of lack of competition in the procurement market.

Corruption and competition in procurement

We consider a procurement problem in which the procurement agent is supposed to allocate the realization of a project according to a competitive mechanism that values bids in terms of the proposed price and quality. Potential bidders have private information about their production costs. Since the procurement agent is also in charge of verifying delivered quality, in exchange for a bribe, he can allow an arbitrary firm to be awarded the realization of the project and to produce a quality level lower than the announced. We compute the equilibrium level of corruption and we study the impact on corruption of the competitiveness of the environment, and in particular of: i) an increase in the number of potential suppliers of the good or service to be procured, ii) competitive (rather than collusive) behavior of procurement agents, and iii) an increase of competition in the market for procurement agents. We identify the effects that influence the equilibrium level of corruption and show that, contrary to conventional wisdom, corruption may well be increasing in competition.

Heterogeneity-promoting optimal procurement

When procurement takes place in the presence of horizontally differentiated contractors, the design of the object being procured affects the resulting degree of competition. This paper highlights the interaction between theoptimal procurement mechanism and the design choice. Contrary to conventional wisdom, the sponsor's design choice, instead of homogenizingthe market to generate competition, promotes heterogeneity.

IT architecture for category driven corporate procurement measurement

The purpose of this thesis was to investigate creating and improving category purchasing visibility for corporate procurement by utilizing financial information. This thesis was a part of the global category driven spend analysis project of Konecranes Plc. While creating general understanding for building category driven corporate spend visibility, the IT architecture and needed purchasing parameters for spend analysis were described. In the case part of the study three manufacturing plants of Konecranes Standard Lifting, Heavy Lifting and Services business areas were examined. This included investigating the operative IT system architecture and needed processes for building corporate spend visibility. The key findings of this study were the identification of the needed processes for gathering purchasing data elements while creating corporate spend visibility in fragmented source system environment. As an outcome of the study, roadmap presenting further development areas was introduced for Konecranes.