Otimização de forma aplicando B-splines sob critério integral de tensões

This work proposes a computational methodology to solve problems of optimization in structural design. The application develops, implements and integrates methods for structural analysis, geometric modeling, design sensitivity analysis and optimization. So, the optimum design problem is particularized for plane stress case, with the objective to minimize the structural mass subject to a stress criterion. Notice that, these constraints must be evaluated at a series of discrete points, whose distribution should be dense enough in order to minimize the chance of any significant constraint violation between specified points. Therefore, the local stress constraints are transformed into a global stress measure reducing the computational cost in deriving the optimal shape design. The problem is approximated by Finite Element Method using Lagrangian triangular elements with six nodes, and use a automatic mesh generation with a mesh quality criterion of geometric element. The geometric modeling, i.e., the contour is defined by parametric curves of type B-splines, these curves hold suitable characteristics to implement the Shape Optimization Method, that uses the key points like design variables to determine the solution of minimum problem. A reliable tool for design sensitivity analysis is a prerequisite for performing interactive structural design, synthesis and optimization. General expressions for design sensitivity analysis are derived with respect to key points of B-splines. The method of design sensitivity analysis used is the adjoin approach and the analytical method. The formulation of the optimization problem applies the Augmented Lagrangian Method, which convert an optimization problem constrained problem in an unconstrained. The solution of the Augmented Lagrangian function is achieved by determining the analysis of sensitivity. Therefore, the optimization problem reduces to the solution of a sequence of problems with lateral limits constraints, which is solved by the Memoryless Quasi-Newton Method It is demonstrated by several examples that this new approach of analytical design sensitivity analysis of integrated shape design optimization with a global stress criterion purpose is computationally efficient

Desenvolvimento da célula base de microestruturas periódicas de compósitos sob otimização topológica

This thesis develops a new technique for composite microstructures projects by the Topology Optimization process, in order to maximize rigidity, making use of Deformation Energy Method and using a refining scheme h-adaptative to obtain a better defining the topological contours of the microstructure. This is done by distributing materials optimally in a region of pre-established project named as Cell Base. In this paper, the Finite Element Method is used to describe the field and for government equation solution. The mesh is refined iteratively refining so that the Finite Element Mesh is made on all the elements which represent solid materials, and all empty elements containing at least one node in a solid material region. The Finite Element Method chosen for the model is the linear triangular three nodes. As for the resolution of the nonlinear programming problem with constraints we were used Augmented Lagrangian method, and a minimization algorithm based on the direction of the Quasi-Newton type and Armijo-Wolfe conditions assisting in the lowering process. The Cell Base that represents the composite is found from the equivalence between a fictional material and a preescribe material, distributed optimally in the project area. The use of the strain energy method is justified for providing a lower computational cost due to a simpler formulation than traditional homogenization method. The results are presented prescription with change, in displacement with change, in volume restriction and from various initial values of relative densities.

Otimização Topológica com Termo-elasticidade Utilizando Elementos Tri3

This work proposes a formulation for optimization of 2D-structure layouts submitted to mechanic and thermal shipments and applied an h-adaptive filter process which conduced to computational low spend and high definition structural layouts. The main goal of the formulation is to minimize the structure mass submitted to an effective state of stress of von Mises, with stability and lateral restriction variants. A criterion of global measurement was used for intents a parametric condition of stress fields. To avoid singularity problems was considerate a release on the stress restriction. On the optimization was used a material approach where the homogenized constructive equation was function of the material relative density. The intermediary density effective properties were represented for a SIMP-type artificial model. The problem was simplified by use of the method of finite elements of Galerkin using triangles with linear Lagrangian basis. On the solution of the optimization problem, was applied the augmented Lagrangian Method, that consists on minimum problem sequence solution with box-type restrictions, resolved by a 2nd orderprojection method which uses the method of the quasi-Newton without memory, during the problem process solution. This process reduces computational expends showing be more effective and solid. The results materialize more refined layouts with accurate topologic and shape of structure definitions. On the other hand formulation of mass minimization with global stress criterion provides to modeling ready structural layouts, with violation of the criterion of homogeneous distributed stress

Otimização topológica de estruturas termoelásticas tridimensionais

This work presents an optimization technique based on structural topology optimization methods, TOM, designed to solve problems of thermoelasticity 3D. The presented approach is based on the adjoint method of sensitivity analysis unified design and is intended to loosely coupled thermomechanical problems. The technique makes use of analytical expressions of sensitivities, enabling a reduction in the computational cost through the use of a coupled field adjoint equation, defined in terms the of temperature and displacement fields. The TOM used is based on the material aproach. Thus, to make the domain is composed of a continuous distribution of material, enabling the use of classical models in nonlinear programming optimization problem, the microstructure is considered as a porous medium and its constitutive equation is a function only of the homogenized relative density of the material. In this approach, the actual properties of materials with intermediate densities are penalized based on an artificial microstructure model based on the SIMP (Solid Isotropic Material with Penalty). To circumvent problems chessboard and reduce dependence on layout in relation to the final optimal initial mesh, caused by problems of numerical instability, restrictions on components of the gradient of relative densities were applied. The optimization problem is solved by applying the augmented Lagrangian method, the solution being obtained by applying the finite element method of Galerkin, the process of approximation using the finite element Tetra4. This element has the ability to interpolate both the relative density and the displacement components and temperature. As for the definition of the problem, the heat load is assumed in steady state, i.e., the effects of conduction and convection of heat does not vary with time. The mechanical load is assumed static and distributed

Dosagem dos níveis de NT pro-BNP nas afecções pericárdicas e sua utilidade como método complementar de avaliação de restrição diastólica. Experiência inicial de 25 casos: 25 cases

OBJETIVO: Determinar se os níveis de NT pro-BNP encontram-se elevados em pacientes com afecções pericárdicas e avaliar a sua relação com medidas ecocardiográficas de disfunção diastólica. MÉTODOS: Vinte e cinco pacientes foram divididos em dois grupos: 1) derrame pericárdico (DP), 15 pacientes; 2) pericardite constritiva (PC), 10 pacientes. Foi constituído um grupo controle de 30 indivíduos sem doença cardíaca. O grau de derrame pericárdico foi avaliado pelo ecocardiograma bidimensional e a restrição avaliada pelo Doppler pulsátil do fluxo mitral. O diagnóstico de PC foi confirmado por meio da ressonância magnética. Os níveis de NT pro-BNP foram medidos por imunoensaio com detecção por eletroquimioluminescência. RESULTADOS: Dos 15 pacientes com DP, 14 apresentavam DP importante e apenas 1, moderado. Log NT pro-BNP esteve aumentado no DP (p <0,05), com média de log 2,31 pg/ml e PC (p <0,05), com média de log 2,67 pg/ml, quando comparados ao grupo controle, média de log 1,32 pg/ml. Não houve diferença entre DP e PC (p = 0,149). O log NT pro-BNP correlacionou-se com o pico de velocidade da onda E (r = 0,845; p = 0,001) e com a relação E/A (r=0,717; p= 0,003). CONCLUSÃO: O NT pro-BNP encontra-se aumentado nas afecções pericárdicas e apresenta relação com o grau de disfunção diastólica, podendo servir como método adicional na quantificação de restrição.

Normotensos com resposta pressórica exagerada ao exercício possuem tônus vagal cardíaco aumentado

FUNDAMENTO: Valores exagerados da pressão arterial sistólica (PAS) durante um teste cardiopulmonar de exercício máximo (TCPE) são classicamente considerados como inapropriados e associados a um maior risco para desenvolvimento de doenças cardiovasculares. Sabe-se que o sistema nervoso autônomo modula a PA no exercício. Contudo, não está claramente estabelecido o comportamento do tônus vagal cardíaco (TVC) em indivíduos saudáveis com uma resposta pressórica exagerada no TCPE. OBJETIVO: Analisar o comportamento do TVC em homens adultos saudáveis que apresentam uma resposta pressórica exagerada no TCPE. MÉTODOS: De 2.505 casos avaliados entre 2002-2009, foram identificados criteriosamente 154 casos de homens, entre 20-50 anos de idade, saudáveis e normotensos. A avaliação incluía exame clínico, medidas antropométricas, testes de exercício de 4 segundos (tônus vagal cardíaco) e TCPE realizado em cicloergômetro, com medidas de pressão arterial a cada minuto pelo método auscultatório. Baseado no valor máximo de PAS obtido no TCPE, a amostra foi dividida em tercis, comparando-se o TVC, a carga máxima e o VO2 máximo. RESULTADOS: Os valores de TVC diferiram entre os indivíduos que se apresentavam nos tercis inferior e superior para a resposta da PAS ao TCPE, respectivamente, 1,57 ± 0,03 e 1,65 ± 0,04 (média ± erro padrão da média) (p = 0,014). Os dois tercis também diferiam quanto ao VO2 máximo (40,7 ± 1,3 vs 46,4 ± 1,3 ml/kg-1.min-1; p = 0,013) e a carga máxima (206 ± 6,3 vs 275 ± 8,7 watts; p < 0,001). CONCLUSÃO: Uma resposta pressórica exagerada durante o TCPE em homens adultos saudáveis é acompanhada de indicadores de bom prognóstico clínico, incluindo níveis mais altos de condição aeróbica e de tônus vagal cardíaco.

Método de trabajo en el proceso lector en Educación General Básica.

Investigar métodos de trabajo en la maduración de capacidades lectoras. Conseguir unas pruebas de diagnóstico para determinar el estado y la progresión individual de cada alumno-a en velocidad lectora y comprensión lectora. El trabajo se ha dividido en trimestres desarrollándose de la siguiente manera: el primer trimestre consiste en la búsqueda de documentación y variables. Concreción de pruebas de diagnóstico. Pase inicial de las pruebas, corrección y valoración. En el segundo trimestre se elabora material, textos y fichas que sirven para corregir y madurar aspectos detectados como insuficientes en la prueba inicial. En el tercer trimestre se efectúa el pase de las pruebas de diagnóstico final, se corrigen y se evalúan. Variables independientes: velocidad lectora; lectura oral (tipo, errores, ritmo, entonación); comprensión (retención, relación, valoración); Hábito lector. Variable dependiente : proceso lector. Textos editados por el Departamento de Psicología y Orientación Escolar de la Consejería de Educación: los trabajos de Urbano y Simona. Pinocho. La golondrina. Fichas de control. Sistema de gráficas. Al final de curso ha mejorado la lectura comprensiva y la velocidad lectora. Ha aumentado el hábito lector de los alumnos. Los resultados en la lectura oral han sido bajos. Se ha profundizado en un tema básico en el aprendizaje y se han descubierto unas pautas que orienten y racionalicen la labor dentro del aula. Vemos interesante diversificar los métodos de trabajo para cubrir fallos con un índice de variedad mayor.

O método da função lagrangiana aumentada barreira modificada para a resolução do fluxo de potência ótimo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Comparação entre os métodos químico-mecânicos, Carisolv® e Papacárie®, com método mecânico manual na remoção de dentina cariada

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise estrutural e de fadiga de juntas rebitadas de uso aeronaútico utilizando o método dos elementos finitos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da eficiência fotocatalítica em função da morfologia de nanoestruturas de TiO2 síntetizadas pelo método hidrotérmico

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Método Pilates: equilíbrio perfeito entre corpo e mente?

Taking as base the Brazilian Physical Education History, it’s possible to observe how much the recognizable corporal activity as smooth and alternative, giving origin to non traditional ways to move the body that receives the name of “alternative corporal practices” has increased lately. Therefore this research was done with objective to raise interest and stimulate physical educational professional and general interested people knowledge to the work of a corporal approach called “Pilates Method”. Based on a bibliographic research in sites, articles, and books about Pilates method, alternative corporal practices and physical education history, we tried to gather, in one material, important information about Pilates method. To organize the material here shown, we guided ourselves on the collection of UNESP´s library and on Pilates methods training courses about which were made references in the body text and were mentioned the bibliographic reference for further profound study of interested people. We hope that Physical Educational professionals and further interested people find in this conclusion course work that intends to contribute to the method divulgation assistance for higher and deeper knowledge concerning to the origin, principles and possibilities of practical appliance pedagogy of Pilates Methods.

Modelación numérica de deslizamientos de ladera en embalses mediante el método de partículas y elementos finitos (PFEM)

Se presentan resultados obtenidos mediante la aplicación del MétododePartículasyElementosFinitos (PFEM) en la simulación dedeslizamientosdeladeraenembalses. Es un fenómeno complejo, por la interacción entre el material deslizado, la masa de agua del embalse, yel conjunto formado por el vaso y la presa. PFEM es un esquema numérico original con el que se ha afrontado con éxito la resolución de problemas de interacción fluido-estructura. Combina un enfoque Lagrangiano con la resolución de las ecuaciones deelementosfinitosmediante la generación de una malla, que se actualiza en cada paso de tiempo. Se presentan resultados de casos de validación en los que se han reproducido ensayos en laboratorio existentes en la bibliografía técnica. Se muestran también otros cálculos más complejos, sobre la cartografía a escala real de un embalse, donde se aprecia el fenómeno de generación de la ola, su propagación por el embalse y la afección a la presa. Por último, se ha modelado el deslizamiento ocurrido en 1958 en la bahía de Lituya (Alaska), enel que la caída de 90 millones de toneladas de roca produjo una ola que alcanzó una sobreelevación máxima de 524 m en la ladera opuesta. Los resultados permiten afirmar que PFEM puede ser una herramienta útil enel análisis de riesgos frente a este tipo de fenómenos, ofreciendo una buena aproximación de las afecciones potenciales

Aplicaciones basadas en las propiedades eléctricas y térmicas de recubrimientos de sílice-cb obtenidos por el método sol-gel

En los últimos años el interés en los recubrimientos obtenidos por sol-gel ha aumentado mucho en aplicaciones de protección y refuerzo de superficies contra la corrosión. Asimismo, el uso de polimorfos de carbono (nanofibras de carbono, grafeno, grafito...) para mejorar las propiedades mecánicas y conferirle propiedades conductoras a algunos materiales, también se ha desarrollado mucho en los últimos años. En trabajos previos se prepararon y estudiaron recubrimientos híbridos de sílice-CB obtenidos por el método sol-gel. Mediante el estudio de la microestructura y composición de estos recubrimientos (SEM, Raman, ATD-TG, y FT-IR) y de las propiedades eléctricas se obtuvo que en función la temperatura de sinterización de los recubrimientos, se podía controlar la respuesta eléctrica de los composites. Esto permite abrir enormemente el campo de aplicaciones, ya que para temperaturas de sinterización por debajo de 400ºC se consiguen resistividades del orden de 10-4Ωm, apropiadas para aplicaciones en dispositivos electrónicos, electrodos, apantallamiento de interferencias electromagnéticas y radiofreciencia, etc; mientras que para temperaturas de sinterización por encima de 400ºC, obtenemos recubrimientos más resistivos que pueden aplicarse como dispositivos calefactores, anticongelantes. Por tanto, el objetivo de este trabajo es desarrollar más profundamente estas aplicaciones, así como diseñar experimentos que demuestren las múltiples posibilidades que estos recubrimientos conductores obtenidos por sol-gel pueden aportar.

Aspectos técnicos da monitorização da pressão intracraniana pelo método subaracnóideo no traumatismo craniencefálico grave

Two hundred and six patients with severe head injury (Glasgow Coma Scale of 8 points or less after nonsurgical resuscitation on admission), managed at Intensive Care Unit-Hospital das Clínicas - Universidade Estadual de Campinas were prospectively analysed. All patients were assessed by CT scan and 72 required neurosurgical intervention. All patients were continuously monitored to evaluate intracranial pressure (ICP) levels by a subarachnoid device (11 with subarachnoid metallic bolts and 195 with subarachnoid polyvinyl catheters). The ICP levels were continuously observed in the bedside pressure monitor display and their end-hour values were recorded in a standard chart. The patients were managed according to a standard protocol guided by the ICP levels. There were no intracranial haemorrhagic complications or hematomas due the monitoring method. Sixty six patients were punctured by lateral C1-C2 technique to assess infectious complications and 2 had positive cerebrospinal fluid samples for Acinetobacter sp. The final results measured at hospital discharge showed 75 deaths (36,40%) and 131 (63,60%) survivors. ICP levels had significantly influenced the final results (p<0,001). The subarachnoid method to continuously assess the ICP levels was considered aplicable, safe, simple, low cost and useful to advise the management of the patients. The ICP record methodology was practical and useful. Despite the current technical advances the subarachnoid method was considered viable to assess the ICP levels in severe head injury.