Development of a Traffic Control Devices and Pavement Markings Manual for Iowa's Cities and Counties with a Survery of Common Practices, April 2001

Transportation agencies in Iowa are responsible for a significant public investment with the installation and maintenance of traffic control devices and pavement markings. Included in this investment are thousands of signs and other inventory items, equipment, facilities, and staff. The proper application of traffic control devices and pavement markings is critical to public safety on streets and highways, and local governments have a prescribed responsibility under the Code of Iowa to properly manage these assets. This research report addresses current traffic control and pavement marking application, maintenance, and management in Iowa.

Relatório de Estágio: Análise da eficiência do Sistema de controlo de tráfego da cidade do Porto

No âmbito da unidade curricular Dissertação/Estágio/Projeto, foi desenvolvido, durante um estágio na Câmara Municipal do Porto, o estudo da eficiência do sistema inteligente de controlo de tráfego implementado na cidade. Este sistema é designado como Sistema Inteligente de Gestão Autónoma - SIGA e tem como base de funcionamento o software de gestão de tráfego GERTRUDE da empresa GERTRUDE SAEM. O sistema de controlo de tráfego encontra-se repartido em 10 zonas interligadas, focadas essencialmente no centro da cidade do Porto. O estudo foi aplicado apenas a uma parte da zona da Constituição, nomeadamente a rua da Constituição, desde a Praça Marquês até à rua Antero de Quental. A eficiência mediu-se pela comparação de duas situações, a circulação e comportamento das correntes de tráfego com o sistema em funcionamento normal e com o sistema desativado. Por sua vez, o indicador utilizado que permitiu avaliar o sistema, foi o nível de serviço obtido pelo atraso médio por veículo em cada ramo de cada interseção. Para determinação do atraso, foram testados diferentes métodos, para se tentar perceber qual aquele que melhor se adequava à situação e que exigia menor número de recursos humanos. À frente serão exaradas algumas conclusões acerca da metodologia de cada um deles e condicionantes que levaram à não utilização de todos os métodos. Depois de aplicadas as metodologias que permitiram determinar o nível de serviço em cada grupo semafórico das diferentes interseções, percebeu-se que existe uma grande diferença na circulação entre as duas situações, sendo que a mais-valia que este sistema apresenta é a coordenação das diferentes interseções que se encontram abrangidas pelas 10 zonas pertencentes ao SIGA.

Unitizing in Supply Chain – Case SECU Container

The aim of this thesis is to analyze how increasing the level of unitizing affects to the costs in the transport system of a Finnish paper and board company. The parts of the supply chain where costs are analyzed are limited to domestic inland transport and port operations. Supply Chain management is important aspect of modern day companies’ strategies. Intermodal transport and different transport systems are the key items which are studied in the theory part of this thesis. In the case study the payload simulations for SECU container (Stora Enso Cargo Unit) stuffed in mills sites are base of the cost analyze of this thesis. Thesis also makes a glance for the restrictions and development trends in Finnish railroads. In analyze SECU containers are moved up to the mill site for stuffing. This increases the level of unitizing in supply chain. Analyze is made for three variation of current traffic lines. Analyze shows that when idea of intermodalism is well used there is considerable cost savings to gather in pre-transportation and port operations. But also effects to mill sites and destination ports needs to be take under considering. In analyze the effects of increased axle weight for SECU container transportation in Finnish railroads is studied. When transport unit is stuffed in earliest possible point supply chain and unloaded the last possible point the savings made in chain can be considerable. In case study of this thesis almost 40% savings in total costs could be reached in pre transportation and port operations when unitizing level is increased in supply chain.

Turun seudun turvallisen ja kestävän liikkumisen suunnitelma

Turun seudun turvallisen ja kestävän liikkumisen suunnitelma on laadittu seudun kuntien ja Varsinais-Suomen ELY-keskuksen yhteistyönä. Suunnitelmassa on selvitetty liikenneturvallisuuden, liikkumisen, toimintaympäristön ja liikennejärjestelmän nykytilaa sekä kartoitettu liikenneturvallisuusongelmia erilaisten analyysien ja kyselyiden avulla. Nykytila-analyysin pohjalta on asetettu liikenneturvallisuustyön visio ja tavoitteet sekä määritetty toimenpide-ehdotukset. Tavoitteisiin pääsemistä tukevat liikenneympäristön parantamistoimenpiteiden ohjelma, liikkumisen ohjauksen toimintaohjelma sekä hallintokuntien liikenneturvallisuustyön toimenpiteistä kootut toimintasuunnitelmat. Onnettomuusanalyysin perusteella liikenneturvallisuuden tila oli Turun seudulla hieman koko Suomen keskiarvoa heikompi. Seudulla tapahtui vuosina 2001-2010 henkilövahinkoon johtaneita onnettomuuksia keskimäärin 132 / 100 000 asukasta, kun vastaava luku oli 126 koko maan osalta. Kuolemaan johtaneita onnettomuuksia tapahtui seudulla vähemmän, mutta loukkaantumiseen johtaneita onnettomuuksia koko maan keskiarvoa enemmän. Onnettomuuksissa kuoli tai loukkaantui koko maan keskiarvoa enemmän jalankulkijoita ja polkupyöräilijöitä. Lukumäärällisesti eniten onnettomuuksia tapahtui 18–19-vuotiaille, mutta henkilövahinkoon johtaneita onnettomuuksia tapahtui selvästi eniten 15–16-vuotiaille. Seudulla tapahtuneista liikenneonnettomuuksista aiheutui vuosittain keskimäärin 127,2 miljoonan euron kustannukset, josta kuntien osuus oli vuosittain noin 22,3 miljoonaa euroa. Asukkaille suunnatun kyselyn mukaan sekä työmatkat että lyhyet vapaa-ajan matkat tehtiin useimmiten henkilöautolla. Koululaisia pidettiin turvattomimpana tienkäyttäjäryhmänä, ja kävelyä sekä pyöräilyä turvattomimpina kulkutapoina. Välinpitämättömyyttä pidettiin merkittävimpänä syynä erilaisiin liikennerikkomuksiin ja tärkeimmäksi kehittämistarpeeksi nousi liikennekäyttäytyminen. Yhdyskuntarakenteen ja toimintaympäristön analyysin perusteella seudulla on hyvät edellytykset kestävien kulkumuotojen kuten joukkoliikenteen houkuttelevuuden lisäämiselle sekä kävelyn ja pyöräilyn verkoston kehittämiselle. Onnettomuusanalyysin ja valtakunnallisten tavoitteiden pohjalta Turun seudulle asetettiin liikenneturvallisuustyön tavoitteet. Tavoitelaskelman mukaan liikennekuolemien ja loukkaantuneiden määrä tulee puolittaa vuosien 2006-2010 keskiarvosta vuoteen 2020 mennessä. Tavoitteen mukaan liikenteessä kuolee enintään 6 (lähtötaso 12) ja loukkaantuu 236 (lähtötaso 471) vuonna 2020. Vaikutusarvion perusteella voidaan arvioida päästävän tavoitteeseen suunnitelmakauden aikana. Tavoitteiden saavuttaminen on kuitenkin haasteellista ja edellyttää tehokasta yhteistyötä eri tahojen välillä. Tavoitteeseen tulee pyrkiä laajaa keinovalikoimaa käyttäen. Suunnitelmatyön aikana aktivoitiin kuntien turvallisen ja kestävän liikkumisen ryhmät, joiden toiminnan tueksi laadittiin toimintasuunnitelmat sekä vuosikello työn eri vaiheista. Ryhmät vastaavat suunnitelman toteuttamisesta, toteutumisen seurannasta ja tarvittaessa päivittämisestä.

Estudio de la viabilidad técnica y económica del establecimiento de una terminal de contenedores automatizada en el Mediterráneo español

Esta Tesis analiza, en primer lugar, las posibilidades y condiciones de los puertos españoles de Algeciras, Valencia y Barcelona para acoger en el futuro una terminal totalmente automatizada (robotizada) de contenedores con una capacidad aproximada de 1,3-1,4 millones de contenedores/año o 2 millones de TEU/año. Entre las posibles amenazas y oportunidades que pueden afectar al actual tráfico de esos puertos, la Tesis se centra en el desvío del tráfico de contenedores de transbordo, la sustitución de los tráficos marinos por tráficos ferroviarios, la posibilidad de convertir al Mediterráneo español en la puerta de entrada de productos asiáticos, el cambio de la ruta Asia-Europa a través del Canal de Suez por la ruta Asia-Europa a través del Ártico, la posibilidad de circunvalar África para evitar el Canal de Suez y la próxima apertura de nuevo Canal de Panamá ampliado. La Tesis describe el Estado del Arte de la tecnología para las terminales de contenedores automatizadas que pudiera ser aplicada en nuestro país y desarrolla una terminal automatizada con la capacidad ya mencionada de 2 millones de TEU/año. El tema del ferrocarril en las terminales de contenedores, como futura lanzadera para la proyección de la influencia de los puertos, está desarrollado como una parte esencial de una terminal de contenedores. Se investiga, también, la automatización total o parcial en la transferencia de mercancía buque-ferrocarril La Tesis también desarrolla una metodología para desglosar los costes e ingresos de una terminal automatizada. A través de esos costes e ingresos se va desarrollando, mediante la utilización de hojas Excel relacionadas, el método para mostrar la estructuración de los hitos económicos fundamentales hasta llegar al VAN, TIR y Periodo de Retorno de la Inversión como elementos clave para la calificación de la terminal como proyecto de inversión. La Tesis realiza la misma metodología para la terminal convencional de contenedores más habitual en el Mediterráneo español: la terminal que utiliza sistemas de grúas sobre ruedas (RTG) en el patio de contenedores. Por último, la Tesis establece la comparativa entre los dos tipos de terminales analizadas: la convencional y la automatizada, basándose en el coste de la mano de obra portuaria como elemento clave para dicha comparativa. Se establece la frontera que determina en qué niveles de coste del personal portuario la terminal automatizada es mejor proyecto de inversión que la terminal convencional con RTG. Mediante la creación de la metodología descrita, la Tesis permite: - La comparativa entre diferentes tipos de terminales - La posibilidad de analizar un modelo de terminal variando sus parámetros fundamentales: costes de los estibadores, nuevas tecnologías de manipulación, diferentes rendimientos, variación de los ingresos, etc. - Descubrir el modelo más rentable de una futura terminal mediante la comparación de las diferentes tecnologías que se puedan emplear para la construcción de dicha terminal ABSTRACT This Thesis examines, first, the possibilities and conditions of the Spanish ports of Algeciras, Valencia and Barcelona to host in the future a fully automated container terminal (robotized) with a capacity of approximately 1.3-1.4 million containers/year or 2 million TEU/year. Among the potential threats and opportunities that may affect the current traffic of these ports, the thesis focuses on the diversion of container transhipment traffic, the replacing of marine traffic by rail traffic, the possibility of converting the Spanish Mediterranean in the door input of Asian products, the changing of the Asia-Europe route through the Suez Canal by the Asia-Europe route through the Arctic, the possibility of circumnavigating Africa to avoid the Suez Canal and the upcoming opening of the new expanded Canal of Panama. The Thesis describes the state-of-the-art technology for automated container terminals that could be applied in our country and develops an automated terminal with the listed capacity of 2 million TEUs / year. The use of the railway system in container terminals to be used as future shuttle to the projection of the influence of the ports is developed as an essential part of a container terminal. We also investigate the total or partial automation in transferring goods from ship to rail. The Thesis also develops a methodology to break down the costs and revenues of an automated terminal. Through these costs and revenues is developed, using linked Excel sheets, the method to show the formation of structured key economic milestones until the NPV, IRR and Period of Return of Investment as key to determining the terminal as an investment project. The Thesis takes the same methodology for the conventional container terminal more common in the Spanish Mediterranean: the terminal using rubber tyred cranes (RTG) in the container yard. Finally, the Thesis provides a comparison between the two types of analyzed terminals: conventional and automated, based on the cost of stevedores labor as a key point for that comparison. It establishes the boundary that determines what levels of stevedore costs make automated terminal to be better investment project than a conventional terminal using RTG. By creating the above methodology, the Thesis allows: - The comparison between different types of terminals - The possibility of analyzing a model of terminal varying its key parameters: stevedores costs, new technologies of container handling, different loading/unloading rates, changes in incomes and so on - Unveil the most profitable model for a future terminal by comparing the different technologies that can be employed for the construction of that terminal

An automatic tuning strategy for local fuzzy logic ramp metering algorithm using Particle Swarm Optimization (PSO)

Freeway systems are becoming more congested each day. One contribution to freeway traffic congestion comprises platoons of on-ramp traffic merging into freeway mainlines. As a relatively low-cost countermeasure to the problem, ramp meters are being deployed in both directions of an 11-mile section of I-95 in Miami-Dade County, Florida. The local Fuzzy Logic (FL) ramp metering algorithm implemented in Seattle, Washington, has been selected for deployment. The FL ramp metering algorithm is powered by the Fuzzy Logic Controller (FLC). The FLC depends on a series of parameters that can significantly alter the behavior of the controller, thus affecting the performance of ramp meters. However, the most suitable values for these parameters are often difficult to determine, as they vary with current traffic conditions. Thus, for optimum performance, the parameter values must be fine-tuned. This research presents a new method of fine tuning the FLC parameters using Particle Swarm Optimization (PSO). PSO attempts to optimize several important parameters of the FLC. The objective function of the optimization model incorporates the METANET macroscopic traffic flow model to minimize delay time, subject to the constraints of reasonable ranges of ramp metering rates and FLC parameters. To further improve the performance, a short-term traffic forecasting module using a discrete Kalman filter was incorporated to predict the downstream freeway mainline occupancy. This helps to detect the presence of downstream bottlenecks. The CORSIM microscopic simulation model was selected as the platform to evaluate the performance of the proposed PSO tuning strategy. The ramp-metering algorithm incorporating the tuning strategy was implemented using CORSIM's run-time extension (RTE) and was tested on the aforementioned I-95 corridor. The performance of the FLC with PSO tuning was compared with the performance of the existing FLC without PSO tuning. The results show that the FLC with PSO tuning outperforms the existing FL metering, fixed-time metering, and existing conditions without metering in terms of total travel time savings, average speed, and system-wide throughput.

Collaborative Management of Intermodal Mobility

Part 21: Mobility and Logistics

Logistics Development in Finnish and Swedish Companies with Respect of Russia and Four Asian Countries: Traffic Flow and Warehousing Analysis from Current Situation and Likely Development Trends

On selvää, että tänä päivänä maailmankaupan painopiste on hiljalleen siirtymässä Aasiaan ja varsinkin Kiina on ollut huomion keskipisteessä. Erityisesti valmistavien yritysten perspektiivistä muutos on ollut merkittävä ja tämä tosiasia kasvattaa yrityksissä paineita luoda kustannustehokkaita toimitusketjuratkaisuja,joiden vasteaika on mahdollisimman lyhyt. Samaan aikaan kun tarkastellaan kuljetusvirtoja, huomattaan että maanosien välillä on suuri epätasapaino. Tämä on enimmäkseen seurausta suurten globaalisti toimivien yritysten toimitusketjustrategioista. Useimmat näistä toimijoista optimoivat verkostonsa turvautumalla 'paikalliseen hankintaan', jotta he voisivat paremmin hallita toimitusketjujaan ja saada näitä reagointiherkimmiksi. Valmistusyksiköillä onkin monesti Euroopassa pakko käyttää kalliita raaka-aineita ja puolivalmisteita. Kriittisiksi tekijöiksi osoittautuvat kuljetus- ja varastointikustannukset sekä näiden seurauksena hukka-aika, joka aiheutuu viivästyksistä. Voidakseen saavuttaa optimiratkaisun, on tehtävä päätös miten tuotteet varastoidaan: keskitetysti tai hajautetusti ja integroida tämä valinta sopivien kuljetusmuotojen kanssa. Aasiasta Pohjois-Eurooppaan on halpaa käyttää merikuljetusta, mutta operaatio kestää hyvin pitkään - joissain tapauksessa jopa kahdeksan viikkoa. Toisaalta lentokuljetus on sekä kallis että rajoittaa siirrettävien tuotteiden eräkokoa.On olemassa kolmaskin vaihtoehto, josta voisi olla ratkaisuksi: rautatiekuljetus on halvempi kuin lentokuljetus ja vasteajat ovat lyhyemmät kuin merikuljetuksissa. Tässä tutkimuksessa tilannetta selvitetään kyselyllä, joka suunnattiin Suomessa ja Ruotsissa toimiville yrityksille. Tuloksien perusteella teemme johtopäätökset siitä, mitkä kuljetusmuotojen markkinaosuudet tulevat olemaan tulevaisuudessa sekä luomme kuvan kuljetusvirroista Euroopan, Venäjän, Etelä-Korea, Intian, Kiinan ja Japanin välillä. Samalla on tarkoitus ennakoida sitä, miten tarkastelun kohteena olevat yritykset aikovat kehittää kuljetuksiaan ja varastointiaan tulevien vuosien aikana. Tulosten perusteella näyttää siltä, että seuraavan viiden vuoden kuluessa kuljetuskustannukset eivät merkittävissä määrin tule muuttuman ja meri- sekä kumipyöräkuljetukset pysyvät suosituimpina vaihtoehtoina.Kuitenkin lentokuljetusten osuus laskee hiukan, kun taas rautatiekuljetusten painotus kasvaa. Tulokset paljastavat, että Kiinassa ja Venäjällä kuljetettava konttimäärä kasvaa; Intiassa tulos on saman suuntainen, joskaan ei niin voimakas. Analyysimme mukaan kuljetusvirtoihin liittyvä epätasapaino säilyy Venäjän kuljetusten suhteen: yritykset jatkavat tulevaisuudessakin vientiperusteista strategiaansa. Varastoinnin puolella tunnistamme pienemmän muutoksen, jonka mukaan pienikokoisten varastojen määrät todennäköisesti vähenevät tulevaisuudessa ja kiinnostus isoja varastoja kohtaan lisääntyy. Tässä kohtaa on mainittava, että suomalaisilla yrityksillä on enemmän varastoja Keski- ja Itä-Euroopassa verrattuna ruotsalaisiin toimijoihin, jotka keskittyvät selkeämmin Länsi-Euroopan maihin. Varastoja yrityksillä on molemmissa tapaukissa paljolti kotimaassaan. Valitessaan varastojensa sijoituskohteita yritykset painottavat seuraavia kriteereitä: alhaiset jakelukustannukset, kokoamispaikan/valmistustehtaan läheisyys, saapuvan logistiikan integroitavuus ja saatavilla olevat logistiikkapalvelut. Tutkimuksemme lopussa päädymme siihen, että varastojen sijoituspaikat eivät muutu satamien rakenteen ja liikenneyhteyksien takia kovinkaan nopeasti.

A modular traffic sampling architecture for flexible network measurements

Dissertação de Mestrado (Programa Doutoral em Informática)

Liability and Traffic Control Considerations for Low Water Stream Crossings, HR-218, 1981

The current shortage of highway funds precludes the immediate replacement of most of the bridges that have been evaluated as structurally deficient or functionally obsolete or both. A low water stream crossing (LWSC) affords an economical alternative to the replacement of a bridge with another bridge in many instances. However, the potential liability that might be incurred from the use of LWSCs has served as a deterrent to their use. Nor have guidelines for traffic control devices been developed for specific application to LWSCs. This research addressed the problems of liability and traffic control associated with the use of LWSCs. Input to the findings from this research was provided by several persons contacted by telephone plus 189 persons who responded to a questionnaire concerning their experience with LWSCs. It was concluded from this research that a significant potential for accidents and liability claims could result from the use of LWSCs. However, it was also concluded that this liability could be reduced to within acceptable limits if adequate warning of the presence of an LWSC were afforded to road users. The potential for accidents and liability could further be reduced if vehicular passage over an LWSC were precluded during periods when the road was flooded. Under these conditions, it is believed, the potential for liability from the use of an LWSC on an unpaved, rural road would be even less than that resulting from the continuing use of an inadequate bridge. The signs recommended for use in advance of an LWSC include two warning signs and one regulatory sign with legends as follows: FLOOD AREA AHEAD, IMPASSABLE DURING HIGH WATER, DO NOT ENTER WHEN FLOODED. Use of the regulatory sign would require an appropriate resolution by the Board of Supervisors having responsibility for a county road. Other recommendations include the optional use of either a supple mental distance advisory plate or an advisory speed plate, or both, under circumstances where these may be needed. It was also recommended HR-218 Liability & Traffic Control Considerations for Low Water Stream Crossings that LWSCs be used only on unpaved roads and that they not be used in locations where flooding of an LWSC would deprive dwelling places of emergency ground access.

Automated Traffic/Truck Weight Monitoring Equipment (Weigh-in-Motion), HR-282, 1988

This report documents work undertaken in the demonstration of a low-cost Automatic Weight and Classification System (AWACS). An AWACS procurement specification and details of the results of the project are also included. The intent of the project is to support and encourage transferring research knowledge to state and local agencies and manufacturers through field demonstrations. Presently available, Weigh-in-Motion and Classification Systems are typically too expensive to permit the wide deployment necessary to obtain representative vehicle data. Piezo electric technology has been used in the United Kingdom and Europe and is believed to be the basic element in a low-cost AWACS. Low-cost systems have been installed at two sites, one in Portland Cement Concrete (PCC) pavement in Iowa and the other in Asphaltic Cement Concrete (ACC) pavement in Minnesota to provide experience with both types of pavement. The systems provide axle weights, gross vehicle weight, axle spacing, vehicle classification, vehicle speed, vehicle count, and time of arrival. In addition, system self-calibration and a method to predict contact tire pressure is included in the system design. The study has shown that in the PCC pavement, the AWACS is capable of meeting the needs of state and federal highway agencies, producing accuracies comparable to many current commercial WIM devices. This is being achieved at a procurement cost of substantially less than currently available equipment. In the ACC pavement the accuracies were less than those observed in the PCC pavement which is concluded to result from a low pavement rigidity at this site. Further work is needed to assess the AWACS performance at a range of sites in ACC pavements.

Evaluation of Racial Differences in Seat Belt and Child Restraint Use: A Review of Current Literature, 2004

This report presents the results of a literature review conducted to evaluate differences in seat belt use by race. A literature review was conducted to evaluate overall seat belt use, racial differences in seat belt use, overall child restraint use, racial differences in child restraint use, and information about seat belt and child restraint use specific to Iowa. A number of national studies and regional studies were found and are presented. Mixed results were found as to whether racial differences exist in both seat belt use and child restraint use. However, in the course of the literature review, several items that are of interest to safety in Iowa have emerged, although little data specific to Iowa was encountered. First, national seat belt use appears to be lower among African-Americans than for Caucasians or Hispanics. Second, national crash rates among Hispanics appear to be higher than those for Caucasians, particularly when population and lower vehicle miles traveled (VMT) are considered. One issue that should be considered throughout this literature review is that the Hispanic population may be higher than reported due to large numbers of undocumented persons who do not appear in population estimates, driver’s license, or other databases.

Remote Sensing Change Analysis Methodology to Support Traffic Monitoring Programs: Phase 2, 2004

The Center for Transportation Research and Education (CTRE) issued a report in July 2003, based on a sample study of the application of remote sensed image land use change detection to the methodology of traffic monitoring in Blackhawk County, Iowa. In summary, the results indicated a strong correlation and a statistically significant regression coefficient between the identification of built-up land use change areas from remote sensed data and corresponding changes in traffic patterns, expressed as vehicle miles traveled (VMT). Based on these results, the Iowa Department of Transportation (Iowa DOT) requested that CTRE expand the study area to five counties in the southwest quadrant of the state. These counties are scheduled for traffic counts in 2004, and the Iowa DOT desired the data to 1) evaluate the current methodology used to place the devices; 2) potentially influence the placement of traffic counting devices in areas of high built-up land use change; and 3) determine if opportunities exist to reduce the frequency and/or density of monitoring activity in lower trafficked rural areas of the state. This project is focused on the practical application of built-up land use change data for placement of traffic count data recording devices in five southwest Iowa counties.

Traffic Control in Work Zones with Edge Drop-Offs, 2002

Pavement and shoulder edge drop-offs commonly occur in work zones as the result of overlays, pavement replacement, or shoulder construction. The depth of these elevation differentials can vary from approximately one inch when a flexible pavement overlay is applied to several feet where major reconstruction is undertaken. The potential hazards associated with pavement edge differentials depend on several factors including depth of the drop-off, shape of the pavement edge, distance from traveled way, vehicle speed, traffic mix, volume, and other factors. This research was undertaken to review current practices in other states for temporary traffic control strategies addressing lane edge differentials and to analyze crash data and resultant litigation related to edge drop-offs. An objective was to identify cost-effective practices that would minimize the potential for and impacts of edge drop crashes in work zones. Considerable variation in addressing temporary traffic control in work zones with edge drop-off exposure was found among the states surveyed. Crashes related to pavement edge drop-offs in work zones do not commonly occur in the state of Iowa, but some have resulted in significant tort claims and settlements. The use of benefit/cost analysis may provide guidance in selection of an appropriate mitigation and protection of edge drop-off conditions. Development and adoption of guidelines for design of appropriate traffic control for work zones that include edge drop-off exposure, particularly identifying effective use of temporary barrier rail, may be beneficial in Iowa.

Are traffic violators criminals? Searching for answers in experiences of European countries

The connection between road traffic safety and criminal behavior has recently become a topic of interest in the literature, although little emphasis placed on the relationship with road accidents. Evidence worldwide shows that people who commit other offences characteristic of antisocial attitudes, are more prone to suffer road traffic accidents and infringe traffic laws. Here we examine the records of the 28 current member states of the European Union over the period 1999 - 2010. Our aim is to test the hypothesis that crime rates (and specifically, motor vehicle-related crimes) may be considered as predictors of fatal road traffic accidents. If they may, this could justify, at least prima facie, the tendency in several countries to consider traffic offences as crimes in their penal codes and to toughen the punishment imposed on those who commit them. We also analyze the effect of the severity of the legal system applied to traffic offences. Our results reveal that road traffic fatality rates are higher in countries whose inhabitants have more aggressive behavior, while the rates are lower in countries with more severe penal systems.