La palabra: transformación de la experiencia en aprendizaje (el sofá)

El presente documento se articula con el objetivo principal del Grupo de Investigación en Perdurabilidad Empresarial (GIPE), ya que este va encaminado a comprender el fenómeno de la vida empresarial mediante la utilización de testimonios con el fin de generar conocimiento para la dirección y la gerencia. De esta forma, el presente proyecto se constituye como un aporte a un proceso investigativo más profundo que está siendo elaborado por Andrés Mira. Dicho documento se pretende entregar a la Escuela de Administración de la Universidad del Rosario generando aportes académicos que integren los procesos investigativos con la innovación educativa para el desarrollo de una realidad empresarial perdurable.

Beneficios y desventajas para la industria textil colombiana, específicamente en el sub sector de algodón, ante la eventual firma y ratificación de un tratado de libre comercio entre Colombia e India

Este proyecto realiza un estudio sobre las principales características de los sub sectores de producción de algodón en India y en Colombia. Ello, debido a que a pesar de no existir ningún acuerdo comercial en la materia entre ambos países, la hipótesis de que este llegase a presentarse resulta atractiva. En este sentido, las características del cultivo, producción y comercialización tanto de India como de Colombia, ofrecen un panorama que invita a reflexionar sobre los beneficios y desventajas para el sub sector de algodón, frente a la eventual firma de un Tratado de Libre Comercio. En este orden de ideas, en este trabajo se observan elementos tales como los distintos pormenores de cada proceso de producción, además de las estrategias de comercialización y las políticas gubernamentales de cada país con relación al cultivo de algodón. Asimismo, se da una mirada a la actualidad del sub sector de algodón en Colombia e India a través la balanza comercial de estos países. De este modo, se proponen una serie de estrategias para contrarrestar las desventajas que podrían presentarse, como a su vez plantear los beneficios que también tendrían lugar y las políticas a implementar.

Epidemiología y perdurabilidad empresarial en Colombia: Grupo Éxito

La muerte empresarial es un proceso que se ha venido presentando en compañías de las diferentes industrias a nivel nacional. La causa son los diferentes factores externos que impactan directamente las operaciones y estructura de estas. Con base en lo anterior es importante resaltar que existen diferentes tipos de muerte empresarial que para efectos de este trabajo se encontraron importante referenciar, pues son el marco del análisis de caso sobre Almacenes Éxito S.A. perteneciente al sector retail, donde se buscaba determinar cuál fue el tipo de cesión que tuvo, como consecuencia de la venta de acciones a la Compañía Francesa Casino Guichard-Perrachon S.A. Además del marco teórico empleado, se encontró importante realizar una reseña histórica de las diferentes empresas que han integrado el sector con el fin de entender posibles generalidades que se han venido replicando y que han llevado a la muerte empresarial de importantes compañías. Este trabajo permite la comprensión de las diferentes transformaciones que pueden tener los entes económicos a lo largo de su vida empresarial, no solo con lo que puede entenderse como el cese de operaciones sino también como apertura a nuevas estrategias de crecimiento y expansión.

Effect of Oxalate Desensitizer on the Durability of Resin-Bonded Interfaces

Potassium oxalate desensitizers were previously shown to effectively reduce the immediate permeability of resin-bonded dentin. The current study evaluated whether the effect of the combined application of oxalate with etch-and-rinse adhesives interferes with the durability of resin-dentin bonds when using etch-and-rinse adhesives. The bond strength of resin-bonded dentin specimens composed of two-step or three-step etch-and-rinse adhesives (Single Bond, One-Step and Scotchbond Multi-Purpose, respectively) was tested immediately (24 hours) and after 12 months of water storage. The adhesives were used either according to the manufacturers` instructions (control groups) or after treating acid-etched dentin with a potassium oxalate gel (BisBlock, BISCO, Inc). The treatment of dentin with potassium oxalate was shown to negatively affect the baseline bond strength of resin-bonded dentin specimens, regardless of the adhesive used (p<0.05). After storage, the bond strength of the resin-bonded interfaces was significantly reduced for all the tested groups (p<0.001). Nevertheless, the rate of decreasing bond strength was significantly lower for oxalate-treated specimens than for the controls (p<0.05).

A reference business process for ecological niche modelling

Ecological niche modelling combines species occurrence points with environmental raster layers in order to obtain models for describing the probabilistic distribution of species. The process to generate an ecological niche model is complex. It requires dealing with a large amount of data, use of different software packages for data conversion, for model generation and for different types of processing and analyses, among other functionalities. A software platform that integrates all requirements under a single and seamless interface would be very helpful for users. Furthermore, since biodiversity modelling is constantly evolving, new requirements are constantly being added in terms of functions, algorithms and data formats. This evolution must be accompanied by any software intended to be used in this area. In this scenario, a Service-Oriented Architecture (SOA) is an appropriate choice for designing such systems. According to SOA best practices and methodologies, the design of a reference business process must be performed prior to the architecture definition. The purpose is to understand the complexities of the process (business process in this context refers to the ecological niche modelling problem) and to design an architecture able to offer a comprehensive solution, called a reference architecture, that can be further detailed when implementing specific systems. This paper presents a reference business process for ecological niche modelling, as part of a major work focused on the definition of a reference architecture based on SOA concepts that will be used to evolve the openModeller software package for species modelling. The basic steps that are performed while developing a model are described, highlighting important aspects, based on the knowledge of modelling experts. In order to illustrate the steps defined for the process, an experiment was developed, modelling the distribution of Ouratea spectabilis (Mart.) Engl. (Ochnaceae) using openModeller. As a consequence of the knowledge gained with this work, many desirable improvements on the modelling software packages have been identified and are presented. Also, a discussion on the potential for large-scale experimentation in ecological niche modelling is provided, highlighting opportunities for research. The results obtained are very important for those involved in the development of modelling tools and systems, for requirement analysis and to provide insight on new features and trends for this category of systems. They can also be very helpful for beginners in modelling research, who can use the process and the experiment example as a guide to this complex activity. (c) 2008 Elsevier B.V. All rights reserved.

On compliance of business processes with business contracts

This paper addresses the problem of ensuring compliance of business processes, implemented within and across organisational boundaries, with the constraints stated in related business contracts. In order to deal with the complexity of this problem we propose two solutions that allow for a systematic and increasingly automated support for addressing two specific compliance issues. One solution provides a set of guidelines for progressively transforming contract conditions into business processes that are consistent with contract conditions thus avoiding violation of the rules in contract. Another solution compares rules in business contracts and rules in business processes to check for possible inconsistencies. Both approaches rely on a computer interpretable representation of contract conditions that embodies contract semantics. This semantics is described in terms of a logic based formalism allowing for the description of obligations, prohibitions, permissions and violations conditions in contracts. This semantics was based on an analysis of typical building blocks of many commercial, financial and government contracts. The study proved that our contract formalism provides a good foundation for describing key types of conditions in contracts, and has also given several insights into valuable transformation techniques and formalisms needed to establish better alignment between these two, traditionally separate areas of research and endeavour. The study also revealed a number of new areas of research, some of which we intend to address in near future.

Major Issues in Business Process Management: An Expert Perspective

The results presented in this report form a part of a larger global study on the major issues in BPM. Only one part of the larger study is reported here, viz. interviews with BPM experts. Interviews of BPM tool vendors together with focus groups involving user organizations, are continuing in parallel and will set the groundwork for the identification of BPM issues on a global scale via a survey (including a Delphi study). Through this multi-method approach, we identify four distinct sets of outcomes. First, as is the focus of this report, we identify the BPM issues as perceived by BPM experts. Second, the research design allows us to gain insight into the opinions of organisations deploying BPM solutions. Third, an understanding of organizations’ misconceptions of BPM technologies, as confronted by BPM tool vendors is obtained. Last, we seek to gain an understanding of BPM issues on a global scale, together with knowledge of matters of concern. This final outcome is aimed to produce an industry driven research agenda which will inform practitioners and in particular, the research community world-wide on issues and challenges that are prevalent or emerging in BPM and related areas.

Modeling control objectives for business process compliance

Business process design is primarily driven by process improvement objectives. However, the role of control objectives stemming from regulations and standards is becoming increasingly important for businesses in light of recent events that led to some of the largest scandals in corporate history. As organizations strive to meet compliance agendas, there is an evident need to provide systematic approaches that assist in the understanding of the interplay between (often conflicting) business and control objectives during business process design. In this paper, our objective is twofold. We will firstly present a research agenda in the space of business process compliance, identifying major technical and organizational challenges. We then tackle a part of the overall problem space, which deals with the effective modeling of control objectives and subsequently their propagation onto business process models. Control objective modeling is proposed through a specialized modal logic based on normative systems theory, and the visualization of control objectives on business process models is achieved procedurally. The proposed approach is demonstrated in the context of a purchase-to-pay scenario.

Compliance aware business process design

Historically, business process design has been driven by business objectives, specifically process improvement. However this cannot come at the price of control objectives which stem from various legislative, standard and business partnership sources. Ensuring the compliance to regulations and industrial standards is an increasingly important issue in the design of business processes. In this paper, we advocate that control objectives should be addressed at an early stage, i.e., design time, so as to minimize the problems of runtime compliance checking and consequent violations and penalties. To this aim, we propose supporting mechanisms for business process designers. This paper specifically presents a support method which allows the process designer to quantitatively measure the compliance degree of a given process model against a set of control objectives. This will allow process designers to comparatively assess the compliance degree of their design as well as be better informed on the cost of non-compliance.