Alquilação redutiva da quitosana a partir do glutaraldeído e 3-amino-1-pr

Chitosan derivatives were prepared by reductive alkylation using glutaraldehyde and 3-amino-1-propanol. The reducing agent used was the sodium borohydride. Tests of solubility, stability and viscosity were performed in order to evaluate these parameters effects in the reaction conditions (molar ratio of the reactants and presence of nitrogen in the reaction system). The molecular structure of commercial chitosan was determined by infrared (IR) and hydrogen nuclear magnetic resonance spectroscopy (1H NMR). The intrinsic viscosity and average molecular weight of the chitosan were determined by viscosimetry in 0.3 M acetic acid aqueous solution 0.2 M sodium acetate at 25 ºC. The derivatives of chitosan soluble in aqueous acidic medium were characterized by 1H NMR. The rheological behavior of the chitosan and of the derivative of chitosan (sample QV), which presented the largest viscosity, were studied as a function of polymer concentration, temperature and ionic strength of the medium. The results of characterization of the commercial chitosan (the degree of deacetylation obtained equal 78.45 %) used in this work confirmed a sample of low molar weight (Mv = 3.57 x 104 g/mol) and low viscosity (intrinsic viscosity = 213.56 mL/g). The chemical modification of the chitosan resulted in derivatives with thickening action. The spectra of 1H NMR of the soluble derivatives in acid aqueous medium suggested the presence of hydrophobic groups grafted into chitosan in function of the chemical modification. The solubility of the derivatives of chitosan in 0.25 M acetic acid aqueous solution decreased with increase of the molar ratio of the glutaraldehyde and 3-amino-1-propanol in relation to the chitosan. The presence of nitrogen and larger amount of reducing agent in reaction system contributed to the increase of the solubility, the stability and the viscosity of the systems. The viscosity of the polymeric suspensions in function of the shear rate increased significantly with polymer concentration, suggesting the formation of strong intermolecular associations. The chitosan presented pseudoplastic behavior with the increase in polymer concentration at a low shear rate. The derivative QV presented pseudoplastic behavior at all concentrations used and in a large range of shear rate. The viscosity of chitosan in solution decreased with an increase of the temperature and with the presence of salt. However, there was an increase of the viscosity of the chitosan solution at higher temperature (65 ºC) and ionic strength of the medium which were promoted by hydrophobic associating of the acetamide groups. The solutions of the chitosan derivatives (sample QV) were significantly more viscous than chitosan solution and showed higher thermal stability in the presence of salt as a function of the hydrophobic groups grafted into chitosan backbone

Obtenção de polímeros graftizados de quitosana e estudo das propriedades físico-químicas para aplicação na indústria do petróleo

Chitosan is a biopolymer derived from the shells of crustaceans, biodegradable, inexpensive and renewable with important physical and chemical properties. Moreover, the different modifications possible in its chemical structure generate new properties, making it an attractive polysaccharide owing to its range of potential applications. Polymers have been used in oil production operations. However, growing concern over environmental constraints has prompted oil industry to search for environmentally sustainable materials. As such, this study sought to obtain chitosan derivatives grafted with hydrophilic (poly(ethylene glycol), mPEG) and/or hydrophobic groups (n-dodecyl) via a simple (one-pot) method and evaluate their physicochemical properties as a function of varying pH using rheology, small-angle Xray scattering (SAXS), dynamic light scattering (DLS) and zeta potential. The chitosan derivatives were prepared using reductive alkylation under mild reaction conditions and the chemical structure of the polymers was characterized by nuclear magnetic resonance (1H NMR) and CHN elemental analysis. Considering a constant mPEG/Chitosan molar ratio on modification of chitosan, the solubility of the polymer across a wide pH range (acidic, neutral and basic) could only be improved when some of the amino groups were submitted to reacetylation using the one-pot method. Under these conditions, solubility is maintained even with the simultaneous insertion of n-dodecyl. On the other hand, the solubility of derivatives obtained only through mPEG incorporation using the traditional methodology, or with the ndodecyl group, was similar to that of its precursor. The hydrophilic group promoted decreased viscosity of the polymer solutions at 10 g/L in acid medium. However, at basic pH, both viscosity and thermal stability increased, as well as exhibited a pronounced pseudoplastic behavior, suggesting strong intermolecular associations in the alkaline medium. The SAXS results showed a polyelectrolyte behavior with the decrease in pH for the polymer systems. DLS analyses revealed that although the dilute polymer solutions at 1 g/L and pH 3 exhibited a high density of protonated amino groups along the polymer chain, the high degree of charge contributed significantly to aggregation, promoting increased particle size with the decrease in pH. Furthermore, the hydrophobic group also contributed to increasing the size of aggregates in solution at pH 3, whereas the hydrophilic group helped reduce their size across the entire pH range. Nevertheless, the nature of aggregation was dependent on the pH of the medium. Zeta potential results indicated that its values do not depend solely on the surface charge of the particle, but are also dependent on the net charge of the medium. In this study, water soluble associative polymers exhibit properties that can be of great interest in the petroleum industry

Dissolução redutiva de minério de ferro por Acidithiobacillus ferrooxidans para a recuperação de metais de interesse econômico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Variabilidade de goethita e hematita via dissolução redutiva em solos de região tropical e subtropical

Dezenove amostras de horizontes B latossólicos, uma de B plíntico, uma de B incipiente e uma de horizonte Cr foram submetidas a dissoluções seletivas da goethita e da hematita por ditionito-citratro-bicarbonato de sódio a 20 ºC em intervalos de tempo entre 5 e 3.840 minutos. O diâmetro médio do cristal (DMC), área superficial específica (ASE) e substituição do ferro por Al (substituição por Al3+) da goethita e da hematita nas amostras foram estimados, por difratometria de raios X (DRX), em subamostras não tratadas e em subamostras tratadas selecionadas ao longo das dissoluções seletivas. O controle das fases de goethita e hematita que persistiram após cada etapa da dissolução seletiva foi realizado pelo método da difratometria diferencial de raios X (DDRX). A cinética dissolutiva dos cristais foi descrita por meio da segmentação das curvas de dissolução do ferro no tempo em intervalos em que o comportamento dissolutivo foi linear. As taxas de dissolução nos diferentes segmentos lineares foram estimadas a partir do coeficiente angular da reta relativa a cada segmento. Em amostras goethíticas latossólicas, a metodologia discriminou diferentes fases de goethita (populações heterogêneas) quanto à substituição por Al3+, DMC e ASE e ofereceu condições para classificar o grau de estabilidade da goethita em baixa, média, alta e muito alta estabilidade. Amostras goethíticas oriundas de ambientes pedogênicos jovens e amostras hematíticas latossólicas caracterizaram-se pela maior homogeneidade de seus cristais, classificados como de baixa e média estabilidade. Nas amostras goethíticas, a proporção de cristais com maior estabilidade (alta substituição por Al3+ e cristalinidade) em cada população mostrou associação positiva com a proporção de gibbsita em relação a caulinita nas amostras. A hematita apresentou menor resistência à dissolução por redução em relação à goethita, exceto quando a última combinou baixa substituição por Al3+ e alta ASE. A caracterização de populações heterogêneas de goethita pode ampliar a utilização deste óxido como indicador de processos pedogênicos em solos poligenéticos, bem como contribuir para um melhor entendimento do comportamento químico e físico desses solos.

Pilarização de esmectita brasileira para fins catalíticos. Emprego de argila pilarizada na alquilação de benzeno com 1-dodeceno

Al-pillared clay was prepared with a Brazilian bentonite from the Campina Grande region (Paraíba, BRAZIL). It was intercalated at 298 K, during 48 hours, with a solution containing [Al3+] = 0.10 mol/L and molar ratio OH/Al = 2.0 prepared at 333 K, and was calcined at 773K. The catalytic activity was evaluated by alkylation of benzene with 1-dodecene. The characterization methods were: X-ray fluorescence and diffraction analysis; 27Al, 29Si and 23Na MAS NMR and textural analysis by N2 adsorption. The thermal stability of the natural clay was improved by the pillaring procedure, as well as the catalytic activity. The intercalated clay presented the highest initial rate of reaction among the systems tested.

Síntese e emprego do ciclometalado [Pd(dmba)(N3)(PPh3)] em processos catalíticos envolvendo a n-carbonilação redutiva de nitroarenos a carbamatos e na síntese de derivados da uréia

This work deals with the use of the cyclometallated compound [Pd(dmba)(N3)(PPh3)] in homogeneous catalytic processes comprising the reductive N-carbonylation of nitrobenzene and p-nitrotoluene to ethyl-phenylcarbamate and ethyl-4-methylphenylcarbamate, respectively. The cyclopalladated compound was also employed in the synthesis of urea derivatives by reacting p-nitrotoluene and m-nitrotoluene, respectively, with p-toluidine and and m-chloroaniline.

Descoloração redutiva de corantes azo e o efeito de mediadores redox na presença do aceptor de elétrons sulfato

We investigated the impact of sulphate and the redox mediator Anthraquinone-2,6-disulfonate (AQDS) on the decolorization of the azo dyes Congo Red (CR) and Reactive Black 5 (RB5). In anaerobic reactors free of extra sulphate dosage, the color removal efficiency decreased drastically when the external electron donor ethanol was removed. In presence of an extra dosage of sulphate, CR decolourisations were 47.8% (free of AQDS) and 96.5% (supplemented with AQDS). The decolourisations achieved in both reactors with RB5 were lower than the ones found with CR. Finally, the biogenic sulphide contribution on azo dye reduction was negligiable.

Estudos teóricos da reação de alquilação desracemizante em enaminas quirais

Utilizando métodos ab initio no nível RHF/6-311G**, combinado com conceitos do Princípio de Curtin-Hammett e da lei de distribuição de Maxwell-Boltzmann, este trabalho teve como objetivo elucidar os mecanismos implicados na reação de Michael assimétrica via o equilíbrio tautomérico imina/enamina quirais, também conhecida como alquilação desracemizante. Estão descritos novas abordagens e metodologias para uma extensiva Análise Conformacional e Análise dos Estados de Transição para moléculas com razoável número de átomos, envolvendo um alto número de graus de liberdade. Essas novas abordagens e metodologias envolvendo o Estado de Transição, proporcionaram gerar resultados com desvio de apenas 10,1% para o valor do excesso diastereoisomérico dos produtos Re/Si envolvendo a enamina (R,R) 5; consideramos ainda neste caso, contribuições de entropia e entalpia (ZPE) para a energia livre absoluta de ativação. Tais resultados obtidos evidenciaram a importância da consideração de um maior número de confôrmeros na obtenção de geometrias no estado de transição, para a correta descrição dos processos cinéticos envolvidos nas reações químicas.

Síntese e emprego do ciclometalado [Pd(dmba)(N3)(PPh3)] em processos catalíticos envolvendo a n-carbonilação redutiva de nitroarenos a carbamatos e na síntese de derivados da uréia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dissolução redutiva de minério de ferro por Acidithiobacillus ferrooxidans para a recuperação de metais de interesse econômico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Alquilação de tolueno com propeno, através de complexo ferro (II) ᵦ- diimina homogêneo e heterogeneizado em MCM-41, Al-MCM-41 e SBA-15

This work describes the synthesis and aplication of homogeneous and heterogenized iron catalysts in the alkylation reaction of toluene with propene, empolying experimental design. The homogenous complex was obtained trough the synthesis of the organic ligand folowed by the complexation of the iron(II) chloride. As to the heterogenized complexes, first were synthetized the inorganic supports (SBA-15, MCM-41 and Al-MCM-41). Then, it was synthetized the ligand again, that through funcionalization with chloropropyltrimethoxysilane (CPTMS), was anchored on the support previously calcinated. To these anchored ligands, was complexed the iron(II) chloride, previously solubilizated in tetrahydrofuran (THF). The organic ligand characterization was accomplished trough nuclear magnetic resonance (NMR) and Infrared spectroscopy (IV). The supports were characterized with x-ray diffraction (DRX), texture analysis with nitrogen adsorption/desorption (before and after the anchoring), termogravimetric analysis (TG) and infrared (IV). The metalic content was quantified trough the atomic absorption spectrophotometry (AAS). The complexes were tested in catalytic reactions emolying ethylaluminium sesquichloride (EASC) as co-catalyst in steel reactor, under mecanic stirring. The reaction conditions ranged from 4 to 36 ◦C, with many aluminum/iron ratios. The catalysts were actives in homogeneous and heterogenized ways. The homogenous catalytic complex showed a maximum turnover frequency (TOF) of 8.63 ×103 · h −1 , while, in some conditions, the anchored complexes showed better results, with TOF of until 8.08 ×103 · h −1 . Aditionally, it was possible to determine an equation, to the homogenous catalyst, that describes the product quantity in function of reacional temperature and aluminum/iron ratio.

Contribuição para o estudo da hidrólise enzimática acelerada da b-lactoglobulina por meio de ultra-sons

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade nova de Lisboa para obtenção do grau de Mestre em Tecnologia e Segurança Alimentar área de especialização Segurança Alimentar

A síntese de um furano-guiano

A síntese de lactonas sesquiterpênicas do tipo guaiano é de interesse devido as atividades biológicas associadas às estruturas complexas deste grupo de produtos naturais. Planejou-se a sua síntese a partir de monoterpenos abundantes isolados de óleos essenciais brasileiros. Assim p-ment-l-eno foi transformado em 2-bromo-6-isopropil-3-metil-ciclohept-2-enona por adição de dibromocarbeno, expansão de anel com rearranjo usado AgNO3, e finalmente oxidação com clorocromato de piridinio. Redução quimioseletiva do bromo com zinco em ácido acético e alquilação termodinâmica em α,β-insaturada. Tratamento com ácido sulfúrico concentrado efetuou hidrólise e desidratação a um furano anelado a um ciclohepteno de estrutura de um oxa-guaiano.

Synthesis of iminosugars through diastereo/enantioselective diels-alder cycloaddition

Tese de Doutoramento em Ciências (Especialidade em Química)

Synthesis and biological evaluation of mono and bis-naphthalimide derivatives against SH-SY5Y, human brain cancer cells

Dissertação de mestrado em Medicinal Chemistry