Química e colorimetria da madeira de Eucalyptus grandis W. Mill ex Maiden termorretificada

A termorretificação visa melhorar as características para agregar valor à madeira através da aplicação de calor. O objetivo foi avaliar as alterações químicas e colorimétricas da madeira termorretificada de Eucalyptus grandis submetida a 170, 200 e 230 ºC por 3, 5 e 7 h. Os teores de extrativos, lignina, holocelulose, composição elementar e os parâmetros colorimétricos foram determinados. Os teores de extrativos aumentaram nos tratamentos a 170 °C e diminuíram a partir de 200 °C, enquanto o teor de lignina total aumentou e o de holocelulose diminuiu a partir de 200 °C. O teor de carbono aumentou e o de oxigênio diminuiu a 230 °C por 5 e 7 h. A termorretificação reduziu a claridade, matriz vermelho (a*) e matriz amarelo (b*) da madeira de eucalipto em todos os tratamentos.

EFFECTS OF HARVESTING ON LEAF PRODUCTION AND REPRODUCTIVE PERFORMANCE OF Copernicia prunifera (Mill.) H.E. Moore1

ABSTRACT This work aimed to evaluate the consequences of the monthly extraction of immature leaves in survival, leaf production and reproductive performance ofCopernicia prunifera H. E. Moore palm, popularly known as carnaúba. One hundred sixty reproductive adult palms were monitored for 17 months in four extractive communities located at the coast of the state of Piauí. As a result, it was observed that leaves, flowers, fruits and seeds production were reduced in the palm submitted to 50% or 75% monthly extraction. Higher levels of extraction were followed by smaller levels in seed germination. No deaths were observed even in the group subjected to 75% monthly leaves exploration. In order not to produce damage to palm trees development it is suggested that leaf extraction rate should not exceed 25% monthly as well as pausing of extractive activity preferentially during fruit maturation.

RELATIONSHIP BETWEEN CLIMATE VARIABLES, TRUNK GROWTH RATE AND WOOD DENSITY OF Eucalyptus grandis W. Mill ex Maiden TREES

ABSTRACT Climatic conditions stimulates the cambial activity of plants, and cause significant changes in trunk diameter growth and wood characteristics. The objective of this study was to evaluate the influence of climate variables in the diameter growth rate of the stem and the wood density of Eucalyptus grandis trees in different classes of the basal area. A total of 25 Eucalyptus trees at 22 months of age were selected according to the basal area distribution. Dendrometer bands were installed at the height of 1.30 meters (DBH) to monitor the diameter growth every 14 days, for 26 months. After measuring growth, the trees were felled and wood discs were removed at the DBH level to determine the radial density profile through x-ray microdensitometry and then re-scale the average values every 14 days. Climatic variables for the monitoring period were obtained and grouped every 14 days. The effect of the climate variables was determined by maximum and minimum growth periods in assessing trunk growth. These growth periods were related with precipitation, average temperature and relative air humidity. The re-scaled wood density values, calculated using the radial growth of the tree trunks measured accurately with steel dendrometers, enabled the determination of the relationship of small changes in wood density and the effect of the climatic variations and growth rate of eucalyptus tree trunks. A high sensitivity of the wood density to variation in precipitation levels was found.

Stochastic variability of output levels in a pulp mill

Quite often, in the construction of a pulp mill involves establishing the size of tanks which will accommodate the material from the various processes in which case estimating the right tank size a priori would be vital. Hence, simulation of the whole production process would be worthwhile. Therefore, there is need to develop mathematical models that would mimic the behavior of the output from the various production units of the pulp mill to work as simulators. Markov chain models, Autoregressive moving average (ARMA) model, Mean reversion models with ensemble interaction together with Markov regime switching models are proposed for that purpose.

Ultrafiltration of pulp mill bleaching effluents

Main objective of this research was to find suitable polymeric ultrafiltration membranes with high retentions, good capacities and low fouling tendencies for the E2- and EP-effluent ultrafiltration. Purpose was to treat alkaline bleaching effluents with ultrafiltration in a way that permeates of the filtrations could be recycled back to process and the consumption of fresh water in the pulp mill could be reduced significantly. In the theoretical part of this work the challenges set by the pulp and paper indus-try processes for membranes were examined. An overview of the membrane tech-nology in the pulp industry was also provided. In addition process conditions in the chemical pulp bleaching and properties of bleaching effluents were discussed in literature study. In experimental part the E2- and EP-stage bleaching effluents from Stora Enso Imatra kraft pulp mill were ultrafiltered with CR250- and CR200-filters. Suitable membranes for ultrafiltration were chosen after screening experiments. Concentra-tion experiment was made for the E2-effluent in order to estimate water saving potential. The E2-effluent was finally ultrafiltered in the pulp mill in order to test the feasibility of ultrafiltration in a real industrial environment. Good membrane for the EP-effluent ultrafiltration based on the EP-screening ex-periments was polyethersulfone membrane UP020 with cut-off value of 20 000 Da. Polysulfone membrane UFX05 with cut-off value of 5 000 Da was promising membrane for the ultrafiltration of the E2-effluent. Based on the concentration filtration of the E2-effluent with UFX05 membrane the water saving potential could be 2.2 m3/Adt for the industrial scale ultrafiltration process. Retention re-sults, such as average COD retention of 60 %, from the trial filtration at the pulp mill with UFX05 membrane were modest compared to the screening experiments, where average COD retention was 75 %. Therefore tighter ultrafiltration mem-branes should be tested for the ultrafiltration of the E2-effluent. The UP020 mem-brane seemed to be suitable for the ultrafiltration of the EP-effluent however con-centration and pilot scale ultrafiltration experiments are needed to verify this.

Tal af John Stuart Mill

14 x 23 cm

Family-based dietary intervention in the STRIP study – influences on diet and diet-related attitudes

The focus of this dissertation was to investigate the effects of family-based dietary intervention during childhood and adolescence. The participants comprised of children and parents who participated in a longitudinal, randomised atherosclerosis prevention trial (STRIP study). The intervention families (n=540) took part in a dietary intervention since the child’s age of 8- months. The control group (n=522) did not receive any tailored dietary intervention. The main focus of the intervention was to improve the quality of dietary fat. The diet of children and parents was evaluated by daily food records and dietrelated attitudes by a questionnaire. The dietary intervention influenced, favourably, the dietary fat quality in children and parents. Fat quality improved mainly by the decrease of saturated fat intake. Some minor effects of the intervention were also observed in children’s fruit and vegetable (F&V) consumption although the F&V consumption was very low. The intervention increased parental interest in healthy eating, but there was no difference in interest in natural products or in attitudes towards hedonic eating attitudes between the intervention and control parents. Parents’ interest in healthy eating associated with parents’ and children’s high fruit and vegetable consumption but not with their fat quality ratio. On the other hand, dietary fat quality improved at every level of interest in healthy eating. It seems that the main target of the intervention, the dietary fat quality of the children, was promoted effectively. In the future, more emphasis should be given on increasing unsaturated fat intake and on elevating F&V consumption in children. Children’s diet, especially F&V consumption, associated with diet-related attitudes of the parents. Therefore, co-operation with parents and family-based premises for working should be capitalized upon when promoting healthy eating in children and adolescents.

Risk management measures for REACH registered intermediate substances in pulp mill

Tämän työn tavoitteena on antaa kuvaus riskinhallintamenetelmistä viidelle välituotekemikaalille, joita käytetään Stora Enson Imatran tehtailla. Välituotekemikaalit ovat mustalipeä, viherlipeä, valkolipeä, natriumbisulfiitti ja natriumsulfiitti. Nämä kemikaalit ovat jo rekisteröityjä ECHA:an ja rekisteröintiin liittyen ECHA:an on toimitettava myös kuvaus riskinhallintamenetelmistä. Työn alussa kuvaillaan työn kannalta olennaiset säädökset ja viranomaiset, jotka valvovat kemikaalien käyttöä ja valmistusta Euroopan Unionin alueella. Tämän jälkeen kerrotaan yleisesti välituotekemikaalien rekisteröintikriteereistä. Työn loppuosa käsittää kuvauksen riskinhallintamenetelmistä jokaiselle kemikaalille. Riskinhallintamenetelmät sisältävät eristyksen teknisin keinoin, menettelytapa- ja valvontatekniikat, johtamistavat ja henkilökunnan koulutuksen ja välituotekemikaalien kuljetuksen. Myös jokaisen kemikaalin ominaisuudet on kuvattu ja lyhyt prosessikuvaus kemikaalien valmistuksesta ja käytöstä on esitetty helpottamaan ymmärtämistä.

Electro-Oxidation Treatment of Pulp and Paper Mill Circulating Waters and Wastewaters

Interest in water treatment by electrochemical methods has grown in recent years. Electrochemical oxidation has been applied particularly successfully to degrade different organic pollutants and disinfect drinking water. This study summarizes the effectiveness of the electrochemical oxidation technique in inactivating different primary biofilm forming paper mill bacteria as well as sulphide and organic material in pulp and paper mill wastewater in laboratory scale batch experiments. Three different electrodes, borondoped diamond (BDD), mixed metal oxide (MMO) and PbO2, were employed as anodes. The impact on inactivation efficiency of parameters such as current density and initial pH or chloride concentration of synthetic paper machine water was studied. The electrochemical behaviour of the electrodes was investigated by cyclic voltammetry with MMO, BDD and PbO2 electrodes in synthetic paper mill water as also with MMO and stainless steel electrodes with biocides. Some suggestions on the formation of different oxidants and oxidation mechanisms were also presented during the treatment. Aerobic paper mill bacteria species (Deinococcus geothermalis, Pseudoxanthomonas taiwanensis and Meiothermus silvanus) were inactivated effectively (>2 log) at MMO electrodes by current density of 50 mA/cm2 and the time taken three minutes. Increasing current density and initial chloride concentration of paper mill water increased the inactivation rate of Deinococcus geothermalis. The inactivation order of different bacteria species was Meiothermus silvanus > Pseudoxanthomonas taiwanensis > Deinococcus geothermalis. It was observed that inactivation was mainly due to the electrochemically generated chlorine/hypochlorite from chloride present in the water and also residual disinfection by chlorine/hypochlorite occurred. In real paper mill effluent treatment sulphide oxidation was effective with all the different initial concentrations (almost 100% reduction, current density 42.9 mA/cm2) and also anaerobic bacteria inactivation was observed (almost 90% reduction by chloride concentration of 164 mg/L and current density of 42.9 mA/cm2 in five minutes). Organic material removal was not as effective when comparing with other tested techniques, probably due to the relatively low treatment times. Cyclic voltammograms in synthetic paper mill water with stainless steel electrode showed that H2O2 could be degraded to radicals during the cathodic runs. This emphasises strong potential of combined electrochemical treatment with this biocide in bacteria inactivation in paper mill environments.

Tertiary Treatment and Re-use of Kraft Pulp Mill Effluent

The efficient use of materials and natural recourses, for ecological and economic reasons, has become more and more important in all industries. In the forest industries this means higher levels of closure in the material circulations of the mills. One possibility to reduce wastewater discharge is to re-use part of the 2nd clarifier effluent as process water. The main target of this thesis was to evaluate the technical suitability of several mechanical and chemical tertiary treatment methods for water re-use. Some of the tested methods seemed to have high potential for the removal of some specific constituents from the wastewater. Tertiary treatment is needed because higher levels of closure may cause problems with increasing amounts of non-process elements in different points of kraft pulp process. The aspect of sustainable development was taken into account by evaluating positive and negative environmental effects of the treatment processes. Environmental benefits can be gained by using some of the tertiary treatment methods tested. These methods should still be researched more for system optimization.

Improving the Supply Chain Performance Management System in a Finnish paper mill

This Master’s Thesis studies performance management system and its benefits, risks and costs. Objective of the thesis is to describe and evaluate currently used supply chain performance management system (SCPMS) in a Finnish paper mill and its interfaces with its business unit’s SCPMS. As a result, the host company has improvement road map for improving its SCPMS. Used SCPMS in the host company and its interfaces to business unit’s SCPMS are described based on interviews held in the host company and the business unit. Evaluation of the host company’s SCPMS is based on literature study. For improvement road map, three areas in need of improvements are chosen. The study shows the need of high level top management commitment in successful performance management system implementation and usage, especially when the system is deployed to lower levels in the organization.

Controle químico de plantas daninhas na semeadura direta de tomate (Lycopersicon esculentum Mill.)

Em dois ensaios, um conduzido em Viçosa, MG, e outro em Domingos Martins, ES, estudou-se o comportamento dos herbicidas metribuzin, chloramben, napropamide, diphenamid, pebulate e trifluralin, nas doses de 0,36; 2,40; 2,50; 2,00; 3,60 e 0,67 kg/ha, respectivamente, e a combinação de 0,35 kg/ha de metribuzin com cada um dos demais, nas mesmas doses, no controle de plantas daninhas e na tolerância da cultura do tomate semeado diretamente no local definitivo. Num terceiro ensaio, conduzido em Viçosa, fez-se o mesmo estudo, combinando pebulate, nas doses 4,32 e 5,76 kg/ha, com chloramben, napropamide, diphenamid e metribuzin, nas doses de 3,40; 3,00; 5,00 e 0,70 kg/ha, respectivamente, e também os mesmos compostos, isoladamente, nas mesmas doses. Todos os herbicidas avaliados exerceram controle sobre as plantas daninhas; entretanto, a eficiência de cada um foi muito influenciada pela espécie presente. Apenas pebulate apresentou eficiente controle da tiririca (Cyperus rotundus L.). Chloramben, napropamide, diphenamid e trifluralin controlaram eficientemente capim-marmelada (Brachiaria plantaginea (Link.) Hitch.) e capim-colchão (Digitaria Sanguinalis (L.) Scop.). Metribuzin apresentou excelente controle de picão-preto (Bidens pilosa L.) e botão-de-ouro (Galin-soga parviflora Cav.). As misturas demetribuzin ou de pebulate com os demais herbicidas aumentaram a eficiência de controle e o número de espécies controladas. Nenhum dos herbicidas, nas doses estudadas, causou danos à cultura e os maiores pesos de matéria verde da parte aérea das plantas de tomate foram obtidos nos tratamentos que proporcionaram maior controle de plantas daninhas.

Efeitos alelopaticos de alguns extratos vegetais na germinação do tomateiro (Lycopersicon esculentum Mill. cv. Santa Cruz)

O presente trabalho teve por finalidade avaliar os possíveis efeitos alelopáticos de três plantas daninhas (Cyperus rotundus, Sorghum halepense e Cynodon dactylon), uma leguminosa (Canavalia ensiformis) e colza (Brassica napus), na germinação das sementes do tomateiro (Lycopersicon esculentum cv. Santa Cruz) utilizado como indicador. Tubérculos de tiririca, rizomas de capim massambará, o sistema radicular de grama seda, além de folhas e raízes de feijão-de-porco e colza, foram homogeneizados em solução aquosa, submetidos a filtração e centrifugação. A aplicação do sobrenadante no substrato de germinação das sementes de tomateiro mostrou afetar o processo germinativo e o desenvolvimento da radícula e do hipocótilo. C. rotundus, S. halepense e raízes de C. ensiformis possuem substâncias altamente inibitórias à germinação do tomateiro 'Santa Cruz'', sendo que a planta indicadora também mostrou-se sensível às substâncias presentes nas folhas de B. napus e em C. dactylon.