Twitter como herramienta para los medios tradicionales de comunicación en Colombia: su incidencia en el cambio de las prácticas periodísticas y la interacción con su público

Las redes sociales digitales han transformado la forma de comunicarse en el Siglo XXI. Twitter es la red social más destacada para los periodistas colombianos pues según un estudio de la consultora de comunicación Burson-Marsteller, el 47% de los comunicadores colombianos utilizan esta red social para construir noticias (Burson-Marsteller, 2013). Por su popularidad, los medios de comunicación han puesto la mirada sobre esta red social pues ven en esta un nuevo espacio de información, razón por la cual se han transformado para convertir a Twitter en un nuevo conducto para la transmisión de sucesos coyunturales. En Colombia, los medios periodísticos de tradición intentan modificar su estructura y rutinas para adecuarse al nuevo molde comunicativo que propone la inclusión de las redes sociales digitales. Este artículo intenta desvelar cuáles son esos cambios que ha sufrido el periodismo colombiano, teniendo como base su relación con Twitter.

Establecimiento de un sistema para el monitoreo y control de la contaminación cruzada en el laboratorio de análisis microbiológico de alimentos durante 2009

Dentro de las actividades para el control de calidad en el laboratorio, los resultados finales de un analito en particular son considerados productos intermedios, dada la pertinencia otorgada al aseguramiento de la calidad como fin último de los programas de gestión de la calidad. Esta concepción precisa el establecimiento de instrumentos integrales para la detección de eventos como la contaminación cruzada y la adopción de medidas para evitar que se afecte la marcha analítica. Objetivo: el objetivo principal fue establecer un sistema para el monitoreo y control de la contaminación cruzada en el laboratorio de análisis microbiológico de alimentos. Materiales y métodos: la metodología empleada consistió en desarrollar diagramas de flujo para los procedimientos sobre el control de las poblaciones de mesófilos aerobios y mohos provenientes de la contaminación en los ambientes, superficies, material estéril y medios de cultivos. Dichos diagramas incluyeron un árbol de decisiones, diseñado para efectuar acciones de control con base en los intervalos de tolerancia, establecidos como herramienta objetiva hacia la toma de decisiones que normalicen los recuentos de las poblaciones microbianas en cuestión. Resultados: los límites de alerta más estrictos se obtuvieron para las poblaciones de mesófilos aerobios y mohos en los diferentes controles, excepto para el ambiente del área de preparación de medios y los correspondientes al material estéril. Conclusión: el proceso desarrollado permitió complementar el sistema de control de calidad interno en el laboratorio, al disponer de un medio objetivo para el cierre de no conformidades por contaminación cruzada.

Liderazgo de Rango Total: revisión teórica del modelo

En el ámbito organizacional es necesario interiorizar y aplicar conceptos que generen herramientas que hagan posible el adecuado funcionamiento de las empresas a efectos de generar mejores resultados, no sólo en términos monetarios sino también sociales y éticos. En la actualidad, el entendimiento de las situaciones, circunstancias y relaciones que se dan dentro de una empresa es un factor relevante para la implementación de estrategias y técnicas, en aras de aumentar la productividad y la eficiencia de las compañías. Es allí donde empieza a tomar importancia la presencia de un líder en la compañía que actúe como agente de cambio y sea considerado como un modelo a seguir capaz de enfrentar situaciones emergentes, tanto positivas como negativas y así generar un cambio, deseos de mejora, propuestas inspiradoras e innovadoras. Lo anterior con el fin de proponer nuevas estrategias que beneficien a todos los involucrados, para así lograr los objetivos proyectados, evitando al máximo los posibles riesgos en que se pueda incurrir. A lo largo de la revisión teórica se tratará el modelo del liderazgo de rango total como un tipo de liderazgo donde el líder es capaz de moldear los puntos de vista, las percepciones, las actitudes y las creencias de los seguidores. Lo anterior sin dejar a un lado los demás estilos de liderazgo que componen el modelo de liderazgo de rango total, el cual puede ser considerado e incluido como una variable interesante en la realización de estudios para analizar la existencia de la relación entre el estilo de liderazgo y los resultados organizacionales.

Anàlisi polifàsica de soques de "Pseudomonas fluorescens" potencials agents de biocontrol de malalties de fruiters

Molts bacteris del grup fluorescent del gènere Pseudomonas són capaços de controlar malalties de les plantes causades per fongs i bacteris fitopatògens (ACBs) o mostren activitat com a bacteris promotors del creixement de les plantes (BPCPs). S'han descrit diversos metabòlits que intervenen de manera important en la seva activitat com a ACBs i BPCPs entre els quals en destaquen el 2,4-diacetilfloroglucinol (Phl), àcid fenazin-1-carboxílic (PCA), Pirrolnitrina (Prn), àcid cianhídric (HCN), àcid 3-indolacètic (IAA), sideròfors i quitinases. L'objectiu principal del nostre treball ha estat la comparació de les característiques d'un grup de Pseudomonas del grup fluorescent utilitzant una aproximació polifàsica amb la finalitat d'establir possibles relacions entre algunes de les característiques i la capacitat d'actuar com a ACB o BPCP. Atesa la importància en el biocontrol de la producció de metabòlits com Phl, PCA i Prn, l'objectiu preliminar ha estat la recerca i obtenció de soques productores d'aquests metabòlits. Per assolir aquest objectiu s'ha emprat una aproximació molecular basada en la detecció dels gens biosintètics implicats en la seva producció en lloc de la detecció directa dels metabòlits per evitar els efectes que poden tenir les condicions de cultiu en la inducció o repressió de la seva síntesi. S'han realitzat diferents protocols basats (i) en la cerca assistida de productors mitjançant l'ús de marcadors fenotípics i posterior confirmació per PCR i, (ii) en l'ús de la PCR per a la detecció dels gens directament dels extractes bacterians, d'enriquiments d'aquests extractes i la realització de la hibridació en colònies per al posterior aïllament. La cerca assistida de productors de Phl mitjançant marcadors fenotípics i posteriorment la utilització de tècniques moleculars (amplificació per PCR del gen phlD), ha estat el millor mètode en el tipus de mostres processades en el nostre treball, on la proporció de productors és relativament baixa. En total s'han aïllat a partir de diversos ambients 4 soques portadores dels gens de la síntesi de PCA, 15 de Phl i 1 de Prn. S'ha constituït una col·lecció de 72 soques de Pseudomonas del grup fluorescent que inclou 18 aïllats propis portadors dels gens biosintètics necessaris per la producció de Phl PCA i Prn; 6 soques de referència procedents de col·leccions de cultius tipus, 14 soques productores dels diferents antibiòtics cedides per altres investigadors i una selecció de 34 soques procedents d'un treball previ realitzat en el nostre grup de recerca. A la col·lecció s'hi troben soques candidates a ACB i BPCP de diverses malalties i plantes. Les 72 soques s'han caracteritzat fenotípica i genotípicament. La caracterització fenotípica s'ha portat a terme mitjançant la identificació a nivell d'espècie amb galeries API 20NE i proves bioquímiques específiques; la producció de metabòlits com PCA, Phl, Prn, IAA, HCN, quitinases i sideròfors mitjançant l'ús de diferents tècniques; antagonisme in vitro en diversos medis enfront dos fongs (Stemphylium vesicarium i Penicillium expansum) i tres bacteris fitopatògens (Erwinia amylovora, Pseudomonas syringae pv. syringae i Xanthomonas arboricola pv. juglandis); l'eficàcia de la inhibició de la infecció en bioassaigs in vivo sobre material vegetal enfront els fongs P. expansum en poma i S. vesicarium en fulles de perera i enfront el bacteri E. amylovora en fruits immadurs de perera i, finalment, en assaigs de promoció de creixement en dos portaempelts comercials de Prunus. Cal destacar que P. expansum causa la podridura blava en pomes i peres en postcollita, S. vesicarium la taca bruna de la perera i E. amylovora el foc bacterià de les rosàcies. El nombre de soques de Pseudomonas, sobre el total de les 72 estudiades, productores d'IAA (4) i quitinases (6) és baix, mentre que és elevat en el cas del HCN (32), que a més està associat a la producció de Phl. Els resultats obtinguts en l'antagonisme in vitro han mostrat en el cas dels bacteris que és dependent del patogen indicador i del medi de cultiu. La presència o absència de ferro no sembla ser un factor que potencií l'antagonisme. En el cas dels fongs no s'ha observat però, influència del medi de cultiu emprat. En el total de 72 soques s'ha observat un percentatge baix de soques que manifesten antagonisme en tots els medis assajats vers 3 o 4 dels patògens (7). Solament 2 d'aquestes 7 soques han mostrat ser també efectives en bioassaigs d'inhibició de les infeccions causades per 2 dels 3 patògens assajats. Algunes de les soques efectives en els bioassaigs no són antagonistes in vitro en cap dels medis assajats enfront el mateix patogen. En el cas de la promoció del creixement, s'han observat més soques promotores del creixement del portaempelts de prunera Marianna 2624 que no en l'híbrid de presseguer-ametller GF677 i les eficàcies assolides són també majors en el cas de Marianna 2624, detectant una elevada especificitat soca/portaempelts La caracterització genotípica s'ha realitzat mitjançant l'anàlisi dels polimorfismes en la longitud dels fragments de restricció de DNA ribosomal (RFLP-rDNA) i l'anàlisi dels polimorfismes en la longitud dels fragments de macrorestricció genòmica de DNA cromosòmic separats per electroforesi en camp polsant (MRFLP-PFGE). Ambdues anàlisis van mostrar una gran heterogeneïtat genètica entre les soques caracteritzades i no s'ha pogut relacionar les agrupacions obtingudes amb les característiques fenotípiques o capacitat d'actuar com a ACB o BPCP. Els patrons de macrorestricció genòmica (MRFLP-PFGE) del bacteri model P. fluorescens EPS288 són estables en el temps i independents de les condicions de cultiu assajades al laboratori o en mostres naturals, mostrant ser una tècnica eficaç en la identificació de reaïllats de mostres naturals inoculades prèviament amb el bacteri. Una selecció de soques que comparteixen el fet de produir floroglucinol s'han caracteritzat mitjançant RFLP i seqüenciació del gen phlD. S'ha establert una relació entre les agrupacions obtingudes en les anàlisis RFLP-rDNA, RFLP-phlD i les seqüències del gen. En l'anàlisi filogenètica de les seqüències del gen phlD s'ha observat un elevat grau de polimorfisme obtenint-se 3 agrupacions principals. Les agrupacions semblen relacionar-se amb els patrons de producció de metabòlits (Phl, HCN i Prn en una primera agrupació; Phl i HCN en la segona i solament Phl en la tercera), però aquestes no s'han pogut relacionar amb l'origen geogràfic de les soques o la seva activitat com a ACBs i/o BPCP. Amb les dades obtingudes de la caracterització fenotípica i genotípica s'ha realitzat una anàlisi multivariant (correspondències, correlacions d'Spearman i de freqüències amb variables categòriques). S'ha demostrat la importància de disposar d'una tècnica que permeti depurar una col·lecció de soques descartant les soques genèticament idèntiques, ja que influeixen en els resultats de les anàlisis. Pels tres patògens assajats com a indicadors i els dos portaempelts emprats, no s'ha observat cap correlació entre la inhibició de la infecció o la promoció del creixement amb les característiques fenotípiques i genotípiques de les soques que fos significatiu i consistent en les tres tècniques emprades.

Savory peptides present in Moromi obtained from soy sauce fermentation of yellow soybean

The presence of savory peptides in moromi has been investigated. Moromi was prepared by fermenting yellow soybean using Aspergillus oryzae as the starter at the first step (mold fermentation) and 20% brine solution at the next step (brine fermentation). The moromi was then ultrafiltered stepwise using membranes with MW cut-offs of 10,000, 3,000, and 500 Da, respectively. The fraction with MW < 500 Da was chromatographed using Sephadex G-25 SF to yield four fractions, 1-4. Analysis of soluble peptides, NaCl content, alpha-amino nitrogen, amino acid composition, peptide profile using CE coupled with DAD, taste profile and free glutamic acid content, were performed for each fraction. Fraction 2 contained a relatively high total glutamic acid content, but a relatively low free glutamic acid content and had the highest umami taste. This fraction also had more peptides containing non-aromatic amino acids than the other fractions. The peptides present in fraction 2 may play a role, at least in part, in its intense umami taste.

An unstructured CVFEM and moving interface algorithm for non-Newtonian Hele-Shaw flows in injection molding

Purpose - The purpose of this paper is to develop a novel unstructured simulation approach for injection molding processes described by the Hele-Shaw model. Design/methodology/approach - The scheme involves dual dynamic meshes with active and inactive cells determined from an initial background pointset. The quasi-static pressure solution in each timestep for this evolving unstructured mesh system is approximated using a control volume finite element method formulation coupled to a corresponding modified volume of fluid method. The flow is considered to be isothermal and non-Newtonian. Findings - Supporting numerical tests and performance studies for polystyrene described by Carreau, Cross, Ellis and Power-law fluid models are conducted. Results for the present method are shown to be comparable to those from other methods for both Newtonian fluid and polystyrene fluid injected in different mold geometries. Research limitations/implications - With respect to the methodology, the background pointset infers a mesh that is dynamically reconstructed here, and there are a number of efficiency issues and improvements that would be relevant to industrial applications. For instance, one can use the pointset to construct special bases and invoke a so-called ""meshless"" scheme using the basis. This would require some interesting strategies to deal with the dynamic point enrichment of the moving front that could benefit from the present front treatment strategy. There are also issues related to mass conservation and fill-time errors that might be addressed by introducing suitable projections. The general question of ""rate of convergence"" of these schemes requires analysis. Numerical results here suggest first-order accuracy and are consistent with the approximations made, but theoretical results are not available yet for these methods. Originality/value - This novel unstructured simulation approach involves dual meshes with active and inactive cells determined from an initial background pointset: local active dual patches are constructed ""on-the-fly"" for each ""active point"" to form a dynamic virtual mesh of active elements that evolves with the moving interface.

Effect of Pre-Heating Resin Composite and Light-Curing Units on Monomer Conversion

The purpose of this study was to evaluate the effect of pre-heating resin composite photo-cured with light-curing units (LCU) by FT-IR. Twenty specimens were made in a metallic mold (4 mm diameter x 2 mm thick) from composite resin-Tetric Ceram (R) (Ivoclar/Vivadent) at room temperature (25 degrees C) and pre heated to 37, 54, and 60 degrees C. The specimens were cured with halogen curing light (QTH) and light emitted by diodes (LED) during 40 s. Then, the specimens were pulverized, pressed with KBr and analyzed with FT-IR. The data were submitted to statistical analysis of variance and Kruskal-Wallis test. Study data showed no statistically significant difference to the degree of conversion for the different light curing units (QTH and LED) (p > 0.05). With the increase of temperature there was significant increase in the degree of conversion (p < 0.05). In this study were not found evidence that the light curing unit and temperature influenced the degree of conversion.

Influence of different light sources and photo-activation methods on degree of conversion and polymerization shrinkage of a nanocomposite resin

The purpose of this study was to evaluate the influence of different light sources and photo-activation methods on degree of conversion (DC%) and polymerization shrinkage (PS) of a nanocomposite resin (Filtek (TM) Supreme XT, 3M/ESPE). Two light-curing units (LCUs), one halogen-lamp (QTH) and one light-emitting-diode (LED), and two different photo-activation methods (continuous and gradual) were investigated in this study. The specimens were divided in four groups: group 1-power density (PD) of 570 mW/cm(2) for 20 s (QTH); group 2-PD 0 at 570 mW/cm(2) for 10 s + 10 s at 570 mW/cm(2) (QTH); group 3-PD 860 mW/cm(2) for 20 s (LED), and group 4-PD 125 mW/cm(2) for 10 s + 10 s at 860 mW/cm(2) (LED). A testing machine EMIC with rectangular steel bases (6 x 1 x 2 mm) was used to record the polymerization shrinkage forces (MPa) for a period that started with the photo-activation and ended after two minutes of measurement. For each group, ten repetitions (n = 40) were performed. For DC% measurements, five specimens (n = 20) for each group were made in a metallic mold (2 mm thickness and 4 mm diameter, ISO 4049) and them pulverized, pressed with bromide potassium (KBr) and analyzed with FT-IR spectroscopy. The data of PS were analyzed by Analysis of Variance (ANOVA) with Welch`s correction and Tamhane`s test. The PS means (MPa) were: 0.60 (G1); 0.47 (G2); 0.52 (G3) and 0.45 (G4), showing significant differences between two photo-activation methods, regardless of the light source used. The continuous method provided the highest values for PS. The data of DC% were analyzed by Analysis of Variance (ANOVA) and shows significant differences for QTH LCUs, regardless of the photo-activation method used. The QTH provided the lowest values for DC%. The gradual method provides lower polymerization contraction, either with halogen lamp or LED. Degree of conversion (%) for continuous or gradual photo-activation method was influenced by the LCUs. Thus, the presented results suggest that gradual method photo-activation with LED LCU would suffice to ensure adequate degree of conversion and minimum polymerization shrinkage.

Measurement of shrinkage of composite resin by laser speckle contrast analysis

The aim of this study was to evaluate the shrinkage of a microhybrid dental composite resin photo-activated by one LED with different power densities by means of speckle technique. The dental composite resin Filtek (TM) Z-250 (3M/ESPE) at color A(2) was used for the samples preparation. Uncured composite was packed in a metallic mold and irradiated during 20 s from 100 to 1000 mW cm(-2). For the photo-activation of the samples, it was used a LED prototype (Light Emission Diode) with wavelength centered at 470 nm and adjustable power density until 1 W cm(-2). The speckle patterns obtained from the bottom composite surfaces were monitored using a CCD camera without lens. The speckle field is recorded in a digital picture and stored by CCD camera as the carrier of information on the displacement of the tested surface. The calculated values were obtained for each pair of adjacent patterns and the changes in speckle contrast as a function of time were obtained from six repeated measurements. The speckle contrasts obtained from the bottom surface with 100 mW cm(-1) were smaller than those than the other power densities. The higher power densities provided the higher shrinkage.

Changes on degree of conversion of dual-cure luting light-cured with blue LED

The indirect adhesive procedures constitute recently a substantial portion of contemporary esthetic restorative treatments. The resin cements have been used to bond tooth substrate and restorative materials. Due to recently introduction of the self-bonding resin luting cement based on a new monomer, filler and initiation technology has become important to study the degree of conversion of these new materials. In the present work the polymerization reaction and the filler content of dual-cured dental resin cements were studied by means of infra-red spectroscopy (FT-IR) and thermogravimetry (TG). Twenty specimens were made in a metallic mold (8 mm diameter x 1 mm thick) from each of 2 cements, PanaviaA (R) F2.0 (Kuraray) and RelyX (TM) Unicem Applicap (3M/ESPE). Each specimen was cured with blue LED with power density of 500 mW/cm(2) for 30 s. Immediately after curing, 24 and 48 h, and 7 days DC was determined. For each time interval 5 specimens were pulverized, pressed with KBr and analyzed with FT-IR. The TG measurements were performed in Netzsch TG 209 under oxygen atmosphere and heating rate of 10A degrees C/min from 25 to 700A degrees C. A two-way ANOVA showed DC (%) mean values statistically significance differences between two cements (p < 0.05). The Tukey`s test showed no significant difference only for the 24 and 48 h after light irradiation for both resin cements (p > 0.05). The Relx-Y (TM) Unicem mean values were significantly higher than PanaviaA (R) F 2.0. The degree of conversion means values increasing with the storage time and the filler content showed similar for both resin cements.

Changes in the temperature of a dental light-cured composite resin by different light-curing units

The purpose of this study was to evaluate the temperature increase during the polymerization process through the use of three different light-curing units with different irradiation times. One argon laser (Innova, Coherent), one halogen (Optilight 501, Demetron), and one blue LED (LEC 1000, MM Optics) LCU with 500 mW/cm(2) during 5, 10, 20, 30, 40, 50, and 60 s of irradiation times were used in this study. The composite resin used was a microhybrid Filtek Z-250 (3M/ESPE) at color A(2). The samples were made in a metallic mold 2 mm in thickness and 4 mm in diameter and previously light-cured during 40 s. A thermocouple (Model 120-202 EAJ, Fenwal Electronic, Milford, MA, USA) was introduced in the composite resin to measure the temperature increase during the curing process. The highest temperature increase was recorded with a Curing Light 2500 halogen LCU (5 and 31 degrees C after 5 and 60 s, respectively), while the lowest temperature increase was recorded for the Innova LCU based on an argon laser (2 and 11 degrees C after 5 and 60 s, respectively). The temperature recorded for LCU based on a blue LED was 3 and 22 degrees C after 5 and 60 s, respectively. There was a quantifiable amount of heat generated during the visible light curing of a composite resin. The amount of heat generated was influenced by the characteristics of the light-curing units used and the irradiation times.

Global Gene Expression Analysis during Germination in the Chytridiomycete Blastocladiella emersonii

Blastocladiella emersonii is an aquatic fungus of the Chytridiomycete class. During germination, the zoospore, a motile nongrowing cell, goes through a cascade of morphological changes that culminates with its differentiation into the germling cell, capable of coenocytic vegetative growth. Transcriptome analyses of B. emersonii cells were carried out during germination induced under various environmental conditions. Microarray data analyzing 3,563 distinct B. emersonii genes revealed that 26% of them are differentially expressed during germination in nutrient medium at at least one of the time points investigated. Over 500 genes are upregulated during the time course of germination under those conditions, most being related to cell growth, including genes involved in protein biosynthesis, DNA transcription, energetic metabolism, carbohydrate and oligopeptide transport, and cell cycle control. On the other hand, several transcripts stored in the zoospores are downregulated during germination in nutrient medium, such as genes involved in signal transduction, amino acid transport, and chromosome organization. In addition, germination induced in the presence of nutrients was compared with that triggered either by adenine or potassium ions in inorganic salt solution. Several genes involved in cell growth, induced during germination in nutrient medium, do not show increased expression when B. emersonii zoospores germinate in inorganic solution, suggesting that nutrients exert a positive effect on gene transcription. The transcriptome data also revealed that most genes involved in cell signaling show the same expression pattern irrespective of the initial germination stimulus.

Global Gene Expression Analysis during Sporulation of the Aquatic Fungus Blastocladiella emersonii

The Blastocladiella emersonii life cycle presents a number of drastic biochemical and morphological changes, mainly during two cell differentiation stages: germination and sporulation. To investigate the transcriptional changes taking place during the sporulation phase, which culminates with the production of the zoospores, motile cells responsible for the dispersal of the fungus, microarray experiments were performed. Among the 3,773 distinct genes investigated, a total of 1,207 were classified as differentially expressed, relative to time zero of sporulation, at at least one of the time points analyzed. These results indicate that accurate transcriptional control takes place during sporulation, as well as indicating the necessity for distinct molecular functions throughout this differentiation process. The main functional categories overrepresented among upregulated genes were those involving the microtubule, the cytoskeleton, signal transduction involving Ca(2+), and chromosome organization. On the other hand, protein biosynthesis, central carbon metabolism, and protein degradation were the most represented functional categories among downregulated genes. Gene expression changes were also analyzed in cells sporulating in the presence of subinhibitory concentrations of glucose or tryptophan. Data obtained revealed overexpression of microtubule and cytoskeleton transcripts in the presence of glucose, probably causing the shape and motility problems observed in the zoospores produced under this condition. In contrast, the presence of tryptophan during sporulation led to upregulation of genes involved in oxidative stress, proteolysis, and protein folding. These results indicate that distinct physiological pathways are involved in the inhibition of sporulation due to these two classes of nutrient sources.

Development of a new stir bar sorptive extraction coating and its application for the determination of six pesticides in sugarcane juice

In this article, a novel polydimethylsiloxane/activated carbon (PDMS-ACB) material is proposed as a new polymeric phase for stir bar sorptive extraction (SBSE). The PDMS-ACB stir bar, assembled using a simple Teflon (R)/glass capillary mold, demonstrated remarkable stability and resistance to organic solvents for more than 150 extractions. The SBSE bar has a diameter of 2.36 mm and a length of 2.2 cm and is prepared to contain 92 mu L of polymer coating. This new PDMS-ACB bar was evaluated for its ability to determine the quantity of pesticides in sugarcane juice samples by performing liquid desorption (LD) in 200 mu L of ethyl acetate and analyzing the solvent through gas chromatography coupled with mass spectrometry (GC-MS). A fractional factorial design was used to evaluate the main parameters involved in the extraction procedure. Then, a central composite design with a star configuration was used to optimize the significant extraction parameters. The method used demonstrated a limit of quantification (LOQ) of 0.5-40 mu g/L, depending on the analyte detected; the amount of recovery varied from 0.18 to 49.50%, and the intraday precision ranged from 0.072 to 8.40%. The method was used in the analysis of real sugarcane juice samples commercially available in local markets.

Inserção comercial do Brasil na américa do sul: um estudo sobre os efeitos da China na região

Texto preparado para o Programa de Fomento à Pesquisa em Desenvolvimento Econômico (PDE) do BNDES, em cooperação com a ANPEC. Este texto é baseado, em parte, em um background paper escrito com Eliana Cardoso para o Projeto da OCDE “Shifting Wealth: Implications for Policy Managers and Governance”. Na versão do texto para a OCDE os autores agradecem os valiosos comentários e sugestões de Andrew Mold e John Whalley. ‡ Professor da Escola de Economia de São Paulo, Fundação Getulio Vargas (FGV-EESP), e Pesquisador CNPq. E-mail: marcio.holland@fgv.br. O autor agradece o apoio generoso no âmbito do Convênio PDE/BNDES-ANPEC e ao CNPq pelo apoio a pesquisa na forma da bolsa de produtividade em pesquisa.