Three essays in risk management in financial institutions

The choice to adopt risk-sensitive measurement approaches for operational risks: the case of Advanced Measurement Approach under Basel II New Capital Accord This paper investigates the choice of the operational risk approach under Basel II requirements and whether the adoption of advanced risk measurement approaches allows banks to save capital. Among the three possible approaches for operational risk measurement, the Advanced Measurement Approach (AMA) is the most sophisticated and requires the use of historical loss data, the application of statistical tools, and the engagement of a highly qualified staff. Our results provide evidence that the adoption of AMA is contingent on the availability of bank resources and prior experience in risk-sensitive operational risk measurement practices. Moreover, banks that choose AMA exhibit low requirements for capital and, as a result might gain a competitive advantage compared to banks that opt for less sophisticated approaches. - Internal Risk Controls and their Impact on Bank Solvency Recent cases in financial sector showed the importance of risk management controls on risk taking and firm performance. Despite advances in the design and implementation of risk management mechanisms, there is little research on their impact on behavior and performance of firms. Based on data from a sample of 88 banks covering the period between 2004 and 2010, we provide evidence that internal risk controls impact the solvency of banks. In addition, our results show that the level of internal risk controls leads to a higher degree of solvency in banks with a major shareholder in contrast to widely-held banks. However, the relationship between internal risk controls and bank solvency is negatively affected by BHC growth strategies and external restrictions on bank activities, while the higher regulatory requirements for bank capital moderates positively this relationship. - The Impact of the Sophistication of Risk Measurement Approaches under Basel II on Bank Holding Companies Value Previous research showed the importance of external regulation on banks' behavior. Some inefficient standards may accentuate risk-taking in banks and provoke a financial crisis. Despite the growing literature on the potential effects of Basel II rules, there is little empirical research on the efficiency of risk-sensitive capital measurement approaches and their impact on bank profitability and market valuation. Based on data from a sample of 66 banks covering the period between 2008 and 2010, we provide evidence that prudential ratios computed under Basel II standards predict the value of banks. However, this relation is contingent on the degree of sophistication of risk measurement approaches that banks apply. Capital ratios are effective in predicting bank market valuation when banks adopt the advanced approaches to compute the value of their risk-weighted assets.

Very high-resolution environmental predictors in species distribution models: moving beyond topography?

Recent advances in remote sensing technologies have facilitated the generation of very high resolution (VHR) environmental data. Exploratory studies suggested that, if used in species distribution models (SDMs), these data should enable modelling species' micro-habitats and allow improving predictions for fine-scale biodiversity management. In the present study, we tested the influence, in SDMs, of predictors derived from a VHR digital elevation model (DEM) by comparing the predictive power of models for 239 plant species and their assemblages fitted at six different resolutions in the Swiss Alps. We also tested whether changes of the model quality for a species is related to its functional and ecological characteristics. Refining the resolution only contributed to slight improvement of the models for more than half of the examined species, with the best results obtained at 5 m, but no significant improvement was observed, on average, across all species. Contrary to our expectations, we could not consistently correlate the changes in model performance with species characteristics such as vegetation height. Temperature, the most important variable in the SDMs across the different resolutions, did not contribute any substantial improvement. Our results suggest that improving resolution of topographic data only is not sufficient to improve SDM predictions - and therefore local management - compared to previously used resolutions (here 25 and 100 m). More effort should be dedicated now to conduct finer-scale in-situ environmental measurements (e.g. for temperature, moisture, snow) to obtain improved environmental measurements for fine-scale species mapping and management.

Building Environmental Management System for Laboratory Products Manufacturing Company according ISO 14001-standard

Tutkielman tavoitteena on rakentaa toimiva ympäristöjärjestelmä Thermo Fisher Scientific Oy:lle. Tutkimuksen tarkoituksena on myös löytää kahdelle täysin erilaiselle toiminnalle yhtenäinen ympäristöjärjestelmä, jonka avulla pystytään ottamaan huomioon molempien toimipaikkojen hieman erilaiset vaatimukset. Lisäksi tavoitteena on muodostaa ympäristöjärjestelmälle oma organisaatio, jonka avulla ympäristöjärjestelmän integrointi yrityksen prosesseihin voidaan suorittaa sujuvasti. Aluksi tutkimusongelmaa lähestytään teoreettisesta näkökulmasta,jossa tarkastellaan ympäristöjärjestelmän historiaa, rakennetta, etuja sekä ISO 14001–standardin rakennetta ja sen etenemistä ympäristöjärjestelmän rakentamisen yhteydessä aina kolmannen osapuolen sertifiointiin asti. Empiria osa alkaa alustavalla ympäristökatselmuksella, jossa selvitetään ympäristöasioiden hoidon nykytaso ja luodaan pohja koko ympäristöjärjestelmän luomiselle, jonka vankimpana perustana on ympäristöpolitiikka. Johdon hyväksymä ympäristöpolitiikka varmistaa johdon sitoutumisen järjestelmään. Ympäristöjärjestelmän toimintarakenteen muodostaminen kahdelle erilaiselle toiminnalle onnistui tutkimuksessa kiitettävästi. Se miten ympäristöjärjestelmä toimii todellisuudessa, tullaan näkemään käytännön kokemuksien yhteydessä.

Logistics Management in China's Development Zones - Finnish Metal Industry Perspective

Alikehittynyt infrastruktuuri, tiukat säädökset ja säädösten tulkitseminen, sekä monimutkaiset verotuskäytännöt ovat aiheuttaneet ongelmia suomalaisille Alikehittynyt infrastruktuuri, tiukat säädökset ja säädösten tulkitseminen, sekä monimutkaiset verotuskäytännöt ovat aiheuttaneet ongelmia suomalaisille yrityksille Kiinassa. Tutkimuksen perusteella yritykset eivät pysty vaikuttamaan infrastruktuurin kehittymiseen tai säädösten implementointiin, mutta ylläpitämällä suhteita ja valitsemalla oikeat partnerit yritykset pystyvät hallitsemaan ongelma-alueitaan. Etenkin ulkomaalaisille yrityksille oikean logistiikkaoperaattorin valinta on tärkeätä ja huomioon ottaen palvelutason, kulttuuritaustan sekä kansainväliset operaatiot on ulkomaalaisten yritysten tehokkaampaa käyttää kansainvälisiä operaattoreita kuin paikallisia toimijoita, jotkaovat usein halvempia, mutta eivät pysty toimimaan kansainvälisellä tasolla. Vientiin keskittyneiden yritysten tulisi sijoittua vapaakauppa-alueille tai vientiin painottuneille teollisuusalueille. Kyseisillä alueilla liiketoiminta mannermaahan on rajoitettu, eivätkä alueet täten sovellu yrityksille, jotka ovat keskittyneet Kiinan markkinoille. Paikallisesti operoivien yritysten tulisi sijoittua normaaleihin teollisuuspuistoihin ja käyttää tullin valvomia varastoja tukemaan kansainvälisiä toimintojaan.Tulisi myös muistaa etteivät kiinalaiset teollisuuspuistot täytä kansainvälisiä kriteerejä, joten säädöksiin on tärkeätä tutustua huolella jamielipiteitä kerätä toisilta yrityksiltä. Kiinassa merkittävimmät logistiikkaongelmat ilmenevät tuonnin ja viennin yhteydessä, jolloin säädökset ja toimintamallit ovat kontrolloidumpia. Etenkin tullaus- ja arvonlisävero ongelmat liittyvät kiinteästi tuonti- ja vientiprosessiin. Tutkimuksen tulokset osoittivat, että tullausprosessi tehostuu yhteistyön ja koulutuksen kautta, mutta arvonlisäverosta aiheutuvien kustannusten minimointi vaatii logistiikkapuistojen käyttöä. Mikäli asiakas haluaa tehdä tullauksen kotiprovinssissaan tai yritys tekee kauppaa ALV -vapautettujen yritysten kanssa, tulisi logistiikkapuistojen käyttöä lisätä. Käytettäessä logistiikkapuistoja yritykset välttävät tuotteiden kuljetukset Hongkongiin jatakaisin säästäen huomattavasti kustannuksissa ja toimitusajoissa. Logistiikkapuistoja on myös mahdollista käyttää ratkaisuna kasvaviin ja viivästyviin ALV palautuksiin. Tutkimuksen tulosten mukaan toimintaympäristö ja vientipainotteinen valmistus ohjaavat 3PL yritysten valintaa ja vaihtoehtoisten logistiikkapalvelujen implementointia. Etabloiduttaessavapaakauppa-alueille vientiin ja tuontiin liittyvät ongelmatekijät vahvistuvat sekä rajoitukset kiinan liiketoimintaan kasvavat, mikä tekee yhteistyönkansainvälisten logistiikkaoperaattoreiden kanssa välttämättömäksi ja kannustaa hyödyntämään logistiikkapuistoja.

Project controlling and risk management in German machine and plant engineering industry

Tutkielman tavoitteena on määritellä projektikontrolloinnin ja - riskijohtamisen roolit ja toiminnot saksalaisissa kone- ja tehdassuunnitteluteollisuusyrityksissä. Tämä on kvalitatiivinen tutkielma, jossa käytetään voimakkaasti kuvailevia metodeita. Materiaali tutkimuksen empiiriseen osaan kerättiin kyselykaavakkeen avulla. Kyselykaavakkeiden tulokset käsiteltiin Microsoft Office Access- ohjelmalla ja analysoitiin Microsoft Office Excel- ohjelmalla ja Pivot table- työkalun avulla. Tutkimustulokset osoittavat, että asianmukaisessa projektikontrollointi- ja riskijohtamismetodien käytössä ja käyttötiheydessä esiintyy puutteita saksalaisissa kone- ja tehdassuunnitteluteollisuusyrityksissä. Tehostamalla ja keskittymällä enemmän projektikontrollointi- ja riskijohtamismetodeihin ja prosesseihin sekä projektien että yritysten suorituskyky paranisi.

Small business management in English

The goal was to define how growth creates problems in small companies with a staff of uner 20, and how the problems are solved. It is not about fast growing companies, but about smoothly or even slowly growing companies. The growth is started through the turnover and the main motive is to have a economic stability. Almost all the companies felt that the main reason for this strate-gic growth was to increase the competitivety. Growth was mainly from the domestic market, and new products and new markets. The biggest problem with this growth was providing capital and also a lack of reas-surance. In additinon to this it was dificult to find suitable personnel and there was a lack of time needed to plan and develop the operation. The lack of product develop-ment, was found to be a problem to some extent, particulary in smaller companies. The follow-up of the finances take place mainly through the profit and loss account, income statement and balance sheets. Apart from that they find the follow up by pro-duct was important. Another important element was to have company tailor-made consulting/sparring in order to develop the operation.

Sales lead management in a global enterprise

Many companies today struggle with problems they face around sales lead management. They are suffering from inconsistent quality of leads, they miss clear sales opportunities and even cannot handle well their internal marketing lists. Meanwhile customers are better and better equipped with means to easily initiate contact via internet, via call centers etc. Investing in lead generation activities that are built on a bad process is not a good idea. Better than asking how to get more leads, companies should ask how to get better quality leads and invest in improving lead management. This study looks sales lead management as a multi step process where a company generates leads in controlled environment, qualifies them and hands over to the sales cycle. As a final step, organization needs to analyze the incomes and successes of different lead sources. Most often in sales lead management a process improvement requires setting up additional controls to enable proper tracking of all leads. A sales lead management process model for the case company is built based on the findings. Implementing the new model involves changes and improvements in some key areas of current process. Starting from the very beginning, these include redefining a bit the lead definition and revising the criteria set for qualified lead. There are some improvements to be done in the system side to enable the proposed model. Lastly a setting for responsible roles is presented.

Spatiotemporal Aspects of Environmental Monitoring in the Complex Coastal Region of Southwest Finland

The management and conservation of coastal waters in the Baltic is challenged by a number of complex environmental problems, including eutrophication and habitat degradation. Demands for a more holistic, integrated and adaptive framework of ecosystem-based management emphasize the importance of appropriate information on the status and changes of the aquatic ecosystems. The thesis focuses on the spatiotemporal aspects of environmental monitoring in the extensive and geomorphologically complex coastal region of SW Finland, where the acquisition of spatially and temporally representative monitoring data is inherently challenging. Furthermore, the region is subject to multiple human interests and uses. A holistic geographical approach is emphasized, as it is ultimately the physical conditions that set the frame for any human activity. Characteristics of the coastal environment were examined using water quality data from the database of the Finnish environmental administration and Landsat TM/ETM+ images. A basic feature of the complex aquatic environment in the Archipelago Sea is its high spatial and temporal variability; this foregrounds the importance of geographical information as a basis of environmental assessments. While evidence of a consistent water turbidity pattern was observed, the coastal hydrodynamic realm is also characterized by high spatial and temporal variability. It is therefore also crucial to consider the spatial and temporal representativeness of field monitoring data. Remote sensing may facilitate evaluation of hydrodynamic conditions in the coastal region and the spatial extrapolation of in situ data despite their restrictions. Additionally, remotely sensed images can be used in the mapping of many of those coastal habitats that need to be considered in environmental management. With regard to surface water monitoring, only a small fraction of the currently available data stored in the Hertta-PIVET register can be used effectively in scientific studies and environmental assessments. Long-term consistent data collection from established sampling stations should be emphasized but research-type seasonal assessments producing abundant data should also be encouraged. Thus a more comprehensive coordination of field work efforts is called for. The integration of remote sensing and various field measurement techniques would be especially useful in the complex coastal waters. The integration and development of monitoring system in Finnish coastal areas also requires further scientific assesement of monitoring practices. A holistic approach to the gathering and management of environmental monitoring data could be a cost-effective way of serving a multitude of information needs, and would fit the holistic, ecosystem-based management regimes that are currently being strongly promoted in Europe.

Analysis of space-time environmental data in complex regions

This thesis develops a comprehensive and a flexible statistical framework for the analysis and detection of space, time and space-time clusters of environmental point data. The developed clustering methods were applied in both simulated datasets and real-world environmental phenomena; however, only the cases of forest fires in Canton of Ticino (Switzerland) and in Portugal are expounded in this document. Normally, environmental phenomena can be modelled as stochastic point processes where each event, e.g. the forest fire ignition point, is characterised by its spatial location and occurrence in time. Additionally, information such as burned area, ignition causes, landuse, topographic, climatic and meteorological features, etc., can also be used to characterise the studied phenomenon. Thereby, the space-time pattern characterisa- tion represents a powerful tool to understand the distribution and behaviour of the events and their correlation with underlying processes, for instance, socio-economic, environmental and meteorological factors. Consequently, we propose a methodology based on the adaptation and application of statistical and fractal point process measures for both global (e.g. the Morisita Index, the Box-counting fractal method, the multifractal formalism and the Ripley's K-function) and local (e.g. Scan Statistics) analysis. Many measures describing the space-time distribution of environmental phenomena have been proposed in a wide variety of disciplines; nevertheless, most of these measures are of global character and do not consider complex spatial constraints, high variability and multivariate nature of the events. Therefore, we proposed an statistical framework that takes into account the complexities of the geographical space, where phenomena take place, by introducing the Validity Domain concept and carrying out clustering analyses in data with different constrained geographical spaces, hence, assessing the relative degree of clustering of the real distribution. Moreover, exclusively to the forest fire case, this research proposes two new methodologies to defining and mapping both the Wildland-Urban Interface (WUI) described as the interaction zone between burnable vegetation and anthropogenic infrastructures, and the prediction of fire ignition susceptibility. In this regard, the main objective of this Thesis was to carry out a basic statistical/- geospatial research with a strong application part to analyse and to describe complex phenomena as well as to overcome unsolved methodological problems in the characterisation of space-time patterns, in particular, the forest fire occurrences. Thus, this Thesis provides a response to the increasing demand for both environmental monitoring and management tools for the assessment of natural and anthropogenic hazards and risks, sustainable development, retrospective success analysis, etc. The major contributions of this work were presented at national and international conferences and published in 5 scientific journals. National and international collaborations were also established and successfully accomplished. -- Cette thèse développe une méthodologie statistique complète et flexible pour l'analyse et la détection des structures spatiales, temporelles et spatio-temporelles de données environnementales représentées comme de semis de points. Les méthodes ici développées ont été appliquées aux jeux de données simulées autant qu'A des phénomènes environnementaux réels; nonobstant, seulement le cas des feux forestiers dans le Canton du Tessin (la Suisse) et celui de Portugal sont expliqués dans ce document. Normalement, les phénomènes environnementaux peuvent être modélisés comme des processus ponctuels stochastiques ou chaque événement, par ex. les point d'ignition des feux forestiers, est déterminé par son emplacement spatial et son occurrence dans le temps. De plus, des informations tels que la surface bru^lée, les causes d'ignition, l'utilisation du sol, les caractéristiques topographiques, climatiques et météorologiques, etc., peuvent aussi être utilisées pour caractériser le phénomène étudié. Par conséquent, la définition de la structure spatio-temporelle représente un outil puissant pour compren- dre la distribution du phénomène et sa corrélation avec des processus sous-jacents tels que les facteurs socio-économiques, environnementaux et météorologiques. De ce fait, nous proposons une méthodologie basée sur l'adaptation et l'application de mesures statistiques et fractales des processus ponctuels d'analyse global (par ex. l'indice de Morisita, la dimension fractale par comptage de boîtes, le formalisme multifractal et la fonction K de Ripley) et local (par ex. la statistique de scan). Des nombreuses mesures décrivant les structures spatio-temporelles de phénomènes environnementaux peuvent être trouvées dans la littérature. Néanmoins, la plupart de ces mesures sont de caractère global et ne considèrent pas de contraintes spatiales com- plexes, ainsi que la haute variabilité et la nature multivariée des événements. A cet effet, la méthodologie ici proposée prend en compte les complexités de l'espace géographique ou le phénomène a lieu, à travers de l'introduction du concept de Domaine de Validité et l'application des mesures d'analyse spatiale dans des données en présentant différentes contraintes géographiques. Cela permet l'évaluation du degré relatif d'agrégation spatiale/temporelle des structures du phénomène observé. En plus, exclusif au cas de feux forestiers, cette recherche propose aussi deux nouvelles méthodologies pour la définition et la cartographie des zones périurbaines, décrites comme des espaces anthropogéniques à proximité de la végétation sauvage ou de la forêt, et de la prédiction de la susceptibilité à l'ignition de feu. A cet égard, l'objectif principal de cette Thèse a été d'effectuer une recherche statistique/géospatiale avec une forte application dans des cas réels, pour analyser et décrire des phénomènes environnementaux complexes aussi bien que surmonter des problèmes méthodologiques non résolus relatifs à la caractérisation des structures spatio-temporelles, particulièrement, celles des occurrences de feux forestières. Ainsi, cette Thèse fournit une réponse à la demande croissante de la gestion et du monitoring environnemental pour le déploiement d'outils d'évaluation des risques et des dangers naturels et anthro- pogéniques. Les majeures contributions de ce travail ont été présentées aux conférences nationales et internationales, et ont été aussi publiées dans 5 revues internationales avec comité de lecture. Des collaborations nationales et internationales ont été aussi établies et accomplies avec succès.

Supply Risk Management in Pharmaceutical

Fast development in the operating environment and fierce competition have driven companies to pursue efficiency and success through lean and global supply chains. At the same time overall uncertainty has increased in the business environment and supply chains have become a priority in risk management since their vulnerability may endanger business continuity. Although risk management should start at procurement strategy development phase, proactive contingency planning is also essential because it enables correct reaction and fast changes in process execution in the case of risk realization. This thesis is a case study conducted in the pharmaceutical industry where purchasing and materials management organizations face a number of challenges and limitations that have to be considered in supply risk management. The goal of the study was to discuss the operating environment, and identify and analyze supply risks and potential risk management practices. The study was concluded with suggestions for purchasing strategy development that take risk management considerations into account. This copy is the public version of the thesis.

International Partner Management in the Software Industry

The purpose of this research is to describe how the scope of internationalization affects partner management in software companies. The effects are analyzed separately for small and large companies. Partner management is described from three perspectives: who should manage partnerships, how they should be managed and how does the context affect the choice of management style. Inductive case study is selected as research design. Eventually four case companies are chosen. The findings reveal that the size of the company affects the volume whereas the scope of internationalization affects the choice of partner management activities. Companies with high scope of internationalization required a more formal yet flexible management system whereas companies with low scope of internationalization relied more on the informal relations and personal management.

Working capital management in the value chain of automotive industry

The objective of this Master’s thesis is to examine working capital management in the automotive industry in years 2006-2008. The study is conducted by the analysis of financial statements. The sample consists of 65 companies that represent different stages in the value chain of automotive industry beginning from raw material suppliers and ending to car dealers. Working capital management is studied by the cash conversion cycle (CCC). The results show that the average CCC of the value chain is 67 days. Car manufacturers had the longest CCC, 106 days, whereas the CCC of oil companies was the shortest, 22 days. The findings suggest that the cycle time of working capital usually follows the cycle time of inventories, since the changes in cycle times of accounts receivable and payable compensate each other. Improvements in working capital management could be achieved by sharing more accurate information in the chain for example about inventory levels and order points of customer. It could also be discussed within the automotive industry, if the long credit periods, which tie up working capital, are really needed. New technologies enable faster payments, which would reduce the cash conversion cycles, improve the profitability of companies, and increase the competitiveness of the value chain. Working capital should not be reduced at the expense of value chain partners, because nowadays the competition is rather between the value chains than between the companies. Similar research design is applied earlier to study working capital management in the value chain of pulp and paper industry. Even if the industries and the structures of the chains differ from each other, results were surprisingly similar. In future research, working capital management in other industries’ value chains could still be studied and compared to previous studies. ICT industry, for example, could be an interesting object.

Military crisis management in the next decade (2020-2030) : inducing consent or relying on compliance?

The most outstanding conceptual challenge of modern crisis management is the principle of consent. It is not a problem only at the operational level - it challenges the entire decision-making structures of crisis management operations. In post-cold war times and especially in the 21st century, there has been a transition from peacekeeping with limited size and scope towards large and complex peace operations. This shift has presented peace operations with a dilemma. How to balance between maintaining consent for peace operations, whilst being able to use military force to coerce those attempting to wreck peace processes? To address such a dilemma, this research aims to promote understanding, on what can be achieved by military crisis management operations (peace support operations) in the next decade. The research concentrates on the focal research question: Should military components induce consent or rely on the compliance of conflicting parties in crisis management operations of the next decade (2020 – 2030)? The focus is on military – political strategic level considerations, and especially on the time before political decisions to commit to a crisis management operation. This study does not focus on which actor or organisation should intervene. The framework of this thesis derives from the so called ‘peacebuilding space’, the scope of peace operations and spoiler theory. Feasibility of both peace enforcement and peacekeeping in countering future risk conditions are analysed in this framework. This future-orientated qualitative research uses the Delphi-method with a panel of national and international experts. Citation analysis supports identification of relevant reference material, which consists of contemporary literature, the Delphi-questionnaires and interviews. The research process followed three main stages. In the first stage, plausible future scenarios and risk conditions were identified with the Delphi-panel. In the second stage, operating environments for peace support operations were described and consequent hypotheses formulated. In the third stage, these hypotheses were tested on the Delphi-panel. The Delphi-panel is sufficiently wide and diverse to produce plausible yet different insights. The research design utilised specifically military crisis management and peace operations theories. This produced various and relevant normative considerations. Therefore, one may argue that this research; which is based on accepted contemporary theory, hypotheses derived thereof and utilising an expert panel, contributes to the realm of peace support operations. This research finds that some degree of peace enforcement will be feasible and necessary in at least the following risk conditions: failed governance; potential spillover of ethnic, religious, ideological conflict; vulnerability of strategic chokepoints and infrastructures in ungoverned spaces; as well as in territorial and extra-territorial border disputes. In addition, some form of peace enforcement is probably necessary in risk conditions pertaining to: extremism of marginalised groups; potential disputes over previously uninhabited and resource-rich territories; and interstate rivalry. Furthermore, this research finds that peacekeeping measures will be feasible and necessary in at least risk conditions pertaining to: potential spillover of ethnic, religious, ideological conflict; uncontrolled migration; consequences from environmental catastrophes or changes; territorial and extra-territorial border disputes; and potential disputes over previously uninhabited and resource-rich territories. These findings are all subject to both generic and case specific preconditions that must exist for a peace support operation. Some deductions could be derived from the research findings. Although some risk conditions may appear illogical, understanding the underlying logic of a conflict is fundamental to understanding transition in crisis management. Practitioners of crisis management should possess cognizance of such transition. They must understand how transition should occur from threat to safety, from conflict to stability – and so forth. Understanding transition is imperative for managing the dynamic evolution of preconditions, which begins at the outset of a peace support operation. Furthermore, it is pertinent that spoilers are defined from a peace process point of view. If spoilers are defined otherwise, it changes the nature of an operation towards war, where the logic is breaking the will of an enemy - and surrender. In peace support operations, the logic is different: actions towards spoilers are intended to cause transition towards consent - not defeat. Notwithstanding future developments, history continues to provide strategic education. However, the distinction is that the risk conditions occur in novel futures. Hence, lessons learned from the past should be fitted to the case at hand. This research shows compelling evidence that swaying between intervention optimism and pessimism is not substantiated. Both peace enforcement and peacekeeping are sine qua non for successful military crisis management in the next decade.

Working capital management in the small and medium-sized enterprises Case: Project-based business environment in Flowrox Oy

This Master´s thesis illustrates how growing a business ties up the company´s working capital and what the cost of committed capital. In order to manage a company´s working capital in rapid business growth phase, the thesis suggests that by monitoring and managing the operating and cash conversion cycles of customers´ projects, a company can find ways to secure the required amount of capital. The research method of this thesis was based on literature reviews and case study research. The theoretical review presents the concepts of working capital and provides the background for understanding how to improve working capital management. The company in subject is a global small and medium-sized enterprise that manufactures pumps and valves for demanding process conditions. The company is expanding, which creates lots of challenges. This thesis concentrates to the company´s working capital management and its efficiency through the supply chain and value chain perspective. The main elements of working capital management are inventory management, accounts receivable management and accounts payable management. Prepayments also play a significant role, particularly in project-based businesses. Developing companies´ working capital management requires knowledge from different kind of key operations´ in the company, like purchasing, production, sales, logistics and financing. The perspective to develop and describe working capital management is an operational. After literature reviews the thesis present pilot projects that formed the basis of a model to monitor working capital in the case company. Based on analysis and pilot projects, the thesis introduces a rough model for monitoring capital commitments in short time period. With the model the company can more efficiently monitor and manage their customer projects.

Improving Product Information Management in Global Project Based Manufacturing

The transition of project based manufacturing business, even more into global networks, sets up challenges for companies to manage their business in this new operating environment. One way to tackle these challenges is the successful management of product information through an extended product’s lifecycle. Thus, one objective of this research is to find ways how product information management in global project based manufacturing can be improved. Another objective is to find a solution how the target company can improve its product information management in the offer-to-procurement business process. Due to the nature of the topic, the study follows constructive research methodology with qualitative methods. By combining literature related to this topic a framework is created to improve product information management in global project based manufacturing. The improvement process in this framework is based on a systematic approach from the current state towards target state. A general aim for improvements should be the integrated product and project lifecycle information management through Lean approach. This introduced framework is applied to the target company through two case projects. Data for building view of current state and analysis is collected mostly by theme interviews and also utilizing other material from the target company. Used tools help to analyzing was the BPMN and the Trace matrix for business chains. Results of the improvement process are collected in a solution proposal which contain the strategic target state as well as long and short term objectives. The strategic target state is defined as controlled customization. Also during the improvement process are created the Information requirements chart in the offer-to-procurement business process, and the Project related initial information questionnaire to customer.