Poverty and the Environment : Investment Poverty and the Role of Assets in Generating Welfare for Farmer Households in the Province of Herrera, Panama

Köyhiä maanviljelijöitä on usein syytetty kehitysmaiden ympäristöongelmista. On väitetty, että eloonjäämistaistelu pakottaa heidät käyttämään maata ja muita luonnonvaroja lyhytnäköisesti. Harva asiaa koskeva tutkimus on kuitenkaan tukenut tätä väitettä; perheiden köyhyyden astetta ja heidän aiheuttamaansa ympäristövaikutusta ei ole kyetty kytkemään toisiinsa. Selkeyttääkseen köyhyys-ympäristö –keskustelua, Thomas Reardon ja Steven Vosti kehittivät investointiköyhyyden käsitteen. Se tunnistaa sen kenties suuren joukon maanviljelijäperheitä, jotka eivät ole köyhiä perinteisten köyhyysmittareiden mukaan, mutta joiden hyvinvointi ei ole riittävästi köyhyysrajojen yläpuolella salliakseen perheen investoida kestävämpään maankäyttöön. Reardon ja Vosti korostivat myös omaisuuden vaikutusta perheiden hyvinvointiin, ja uskoivat sen vaikuttavan tuotanto- ja investointipäätöksiin. Tässä tutkimuksessa pyritään vastaamaan kahteen kysymykseen: Miten investointiköyhyyttä voidaan ymmärtää ja mitata? Ja, mikä on viljelijäperheiden omaisuuden hyvinvointia lisäävä vaikutus? Tätä tutkimusta varten haastateltiin 402 maanviljelijäperhettä Väli-Amerikassa, Panaman tasavallan Herreran läänissä. Näiden perheiden hyvinvointia mitattiin heidän kulutuksensa mukaan, ja paikalliset köyhyysrajat laskettiin paikallisen ruoan hinnan mukaan. Herrerassa ihminen tarvitsee keskimäärin 494 dollaria vuodessa saadakseen riittävän ravinnon, tai 876 dollaria vuodessa voidakseen ravinnon lisäksi kattaa muitakin välttämättömiä menoja. Ruoka- eli äärimmäisen köyhyyden rajan alle jäi 15,4% tutkituista perheistä, ja 33,6% oli jokseenkin köyhiä, eli saavutti kyllä riittävän ravitsemuksen, muttei kyennyt kustantamaan muita perustarpeitaan. Molempien köyhyysrajojen yläpuolelle ylsi siis 51% tutkituista perheistä. Näiden köyhyysryhmien välillä on merkittäviä eroavaisuuksia ei vain perheiden varallisuuden, tulojen ja investointistrategioiden välillä, mutta myös perheiden rakenteessa, elinympäristössä ja mahdollisuuksissa saada palveluja. Investointiköyhyyden mittaaminen osoittautui haastavaksi. Herrerassa viljelijät eivät tee investointeja puhtaasti ympäristönsuojeluun, eikä maankäytön kestävyyttä muutenkaan pystytty yhdistämään perheiden hyvinvoinnin tasoon. Siksi investointiköyhyyttä etsittiin sellaisena hyvinvoinnin tasona, jonka alapuolella elävien perheiden parissa tuottavat maanparannusinvestoinnit eivät enää ole suorassa suhteessa hyvinvointiin. Tällaisia investointeja ovat mm. istutetut aidat, lannoitus ja paranneltujen laiduntyyppien viljely. Havaittiin, että jos perheen hyvinvointi putoaa alle 1000 dollarin/henkilö/vuosi, tällaiset tuottavat maanparannusinvestoinnit muuttuvat erittäin harvinaisiksi. Investointiköyhyyden raja on siis noin kaksi kertaa riittävän ravitsemuksen hinta, ja sen ylitti 42,3% tutkituista perheistä. Heille on tyypillistä, että molemmat puolisot käyvät työssä, ovat korkeasti koulutettuja ja yhteisössään aktiivisia, maatila tuottaa paremmin, tilalla kasvatetaan vaativampia kasveja, ja että he ovat kerryttäneet enemmän omaisuutta kuin investointi-köyhyyden rajan alla elävät perheet. Tässä tutkimuksessa kyseenalaistettiin yleinen oletus, että omaisuudesta olisi poikkeuksetta hyötyä viljelijäperheelle. Niinpä omaisuuden vaikutusta perheiden hyvinvointiin tutkittiin selvittämällä, mitä reittejä pitkin perheiden omistama maa, karja, koulutus ja työikäiset perheenjäsenet voisivat lisätä perheen hyvinvointia. Näiden hyvinvointi-mekanismien ajateltiin myös riippuvan monista väliin tulevista tekijöistä. Esimerkiksi koulutus voisi lisätä hyvinvointia, jos sen avulla saataisiin paremmin palkattuja töitä tai perustettaisiin yritys; mutta näihin mekanismeihin saattaa vaikuttaa vaikkapa etäisyys kaupungeista tai se, omistaako perhe ajoneuvon. Köyhimpien perheiden parissa nimenomaan koulutus olikin ainoa tutkittu omaisuuden muoto, joka edisti perheen hyvinvointia, kun taas maasta, karjasta tai työvoimasta ei ollut apua köyhyydestä nousemiseen. Varakkaampien perheiden parissa sen sijaan korkeampaa hyvinvointia tuottivat koulutuksen lisäksi myös maa ja työvoima, joskin monesta väliin tulevasta muuttujasta, kuten tuotantopanoksista riippuen. Ei siis ole automaatiota, jolla omaisuus parantaisi perheiden hyvinvointia. Vaikka rikkailla onkin yleensä enemmän karjaa kuin köyhemmillä, ei tässä aineistossa löydetty yhtään mekanismia, jota kautta karjan määrä tuottaisi korkeampaa hyvinvointia viljelijäperheille. Omaisuuden keräämisen ja hyödyntämisen strategiat myös muuttuvat hyvinvoinnin kasvaessa ja niihin vaikuttavat monet ulkoiset tekijät. Ympäristön ja köyhyyden suhde on siis edelleen epäselvä. Köyhyyden voittaminen vaatii pitkällä tähtäimellä sitä, että viljelijäperheet nousisivat investointiköyhyyden rajan yläpuolelle. Näin heillä olisi varaa alkaa kartuttaa omaisuutta ja investoida kestävämpään maankäyttöön. Tällä hetkellä kuitenkin isolle osalle herreralaisia perheitä tuo raja on kaukana tavoittamattomissa. Miten päästä yli tuhannen dollarin kulutukseen perheenjäsentä kohden, mikäli elintaso ei yllä edes riittävään ravitsemukseen? Ja sittenkin, vaikka hyvinvointi kohenisi, ei ympäristön kannalta parannuksia ole välttämättä odotettavissa, mikäli karjalaumat kasvavat ja eroosioalttiit laitumet leviävät.

Factors affecting farmland prices in Finland

The purpose of the study was to analyse factors affecting the differences in land prices between regions. The key issue was to find out the policy effects on farmland prices. In addition to comprehensive literature review, a theoretical analysis as well as modern panel and spatial econometric techniques were utilized. The study clearly pointed out the importance of taking into account the possible spatial dependence. The data were exceptionally large, comprising more than 6 000 observations. Thus, it allowed a thorough econometric estimation including the possibility to take into account the spatial nature of the data. This study supports the view that there are many other factors that affect farmland prices besides pure agricultural returns. It was also found that the support clearly affects land prices. However, rather than assuming the discount rates for support and market returns to be similar, the rough analysis refers to the discount rate for support being a little lower. If this were true it would indicate that farmers rely more on support income than market returns. The results support the view presented in literature that land values are more responsive to government payments when these payments are perceived to be permanent. An important result of this study is that the structural differences between regions and the structural change in agriculture seemed to have a considerable role in affecting land prices. Firstly, the present structure affects the competition in the land market: the more dense farms are in the region the more there are potential buyers, and the land price increases. Secondly, the change in farm structure (especially in animal husbandry) connected to the policy changes that increase area-based support affects land prices. The effect comes from two sources. Growing farms need more land for the manure, and the proportion of retiring farmers may be lower. The introduction of the manure density variable proved to be an efficient way to aggregate the otherwise very difficult task of taking into account the environmental pressure caused by structural change in animal husbandry. Finally, infrastructure also has a very important role in determining the price level of agricultural land. If other industries are prospering in the surrounding area, agricultural viability also seems to improve. The non-farm opportunities offered to farm families make continuing and developing farming more tempting.

Determinants of farmer retirement and farm succession in Finland

In the past decade, the Finnish agricultural sector has undergone rapid structural changes. The number of farms has decreased and the average farm size has increased when the number of farms transferred to new entrants has decreased. Part of the structural change in agriculture is manifested in early retirement programmes. In studying farmers exit behaviour in different countries, institutional differences, incentive programmes and constraints are found to matter. In Finland, farmers early retirement programmes were first introduced in 1974 and, during the last ten years, they have been carried out within the European Union framework for these programmes. The early retirement benefits are farmer specific and de-pend on the level of pension insurance the farmer has paid over his active farming years. In order to predict the future development of the agricultural sector, farmers have been frequently asked about their future plans and their plans for succession. However, the plans the farmers made for succession have been found to be time inconsistent. This study estimates the value of farmers stated succession plans in predicting revealed succession decisions. A stated succession plan exists when a farmer answers in a survey questionnaire that the farm is going to be transferred to a new entrant within a five-year period. The succession is revealed when the farm is transferred to a suc-cessor. Stated and revealed behaviour was estimated as a recursive Binomial Probit Model, which accounts for the censoring of the decision variables and controls for a potential correlation between the two equations. The results suggest that the succession plans, as stated by elderly farmers in the questionnaires, do not provide information that is significant and valuable in predicting true, com-pleted successions. Therefore, farmer exit should be analysed based on observed behaviour rather than on stated plans and intentions. As farm retirement plays a crucial role in determining the characteristics of structural change in agriculture, it is important to establish the factors which determine an exit from farming among eld-erly farmers and how off-farm income and income losses affect their exit choices. In this study, the observed choice of pension scheme by elderly farmers was analysed by a bivariate probit model. Despite some variations in significance and the effects of each factor, the ages of the farmer and spouse, the age and number of potential successors, farm size, income loss when retiring and the location of the farm together with the production line were found to be the most important determi-nants of early retirement and the transfer or closure of farms. Recently, the labour status of the spouse has been found to contribute significantly to individual retirement decisions. In this study, the effect of spousal retirement and economic incentives related to the timing of a farming couple s early retirement decision were analysed with a duration model. The results suggest that an expected pension in particular advances farm transfers. It was found that on farms operated by a couple, both early retirement and farm succession took place more often than on farms operated by a single person. However, the existence of a spouse delayed the timing of early retirement. Farming couples were found to co-ordinate their early retirement decisions when they both exit through agricultural retirement programmes, but such a co-ordination did not exist when one of the spouses retired under other pension schemes. Besides changes in the agricultural structure, the share and amount of off-farm income of a farm family s total income has also increased. In the study, the effect of off-farm income on farmers retirement decisions, in addition to other financial factors, was analysed. The unknown parameters were first estimated by a switching-type multivariate probit model and then by the simulated maxi-mum likelihood (SML) method, controlling for farmer specific fixed effects and serial correlation of the errors. The results suggest that elderly farmers off-farm income is a significant determinant in a farmer s choice to exit and close down the farm. However, off-farm income only has a short term effect on structural changes in agriculture since it does not significantly contribute to the timing of farm successions.

Puutarhakasvien talvehtiminen Manner-Suomen ilmastossa - nyt ja tulevaisuudessa

Tämä työ käsittelee Suomen ilmastoa puutarhakasvien näkökulmasta painopisteen ollessa lämpöilmastollisissa piirteissä ja kasvien talvehtimiseen liittyvissä tekijöissä. Työssä esitellään puutarhakasvien, erityisesti monivuotisten puuvartisten kasvien selviytymiseen vaikuttavia tekijöitä, ja näiden pohjalta kartoitetaan ilmastollisia olosuhteita eri puolilla Suomea viimeisen noin viiden vuosikymmenen ajalta. Lisäksi pyritään arvioimaan tuleville vuosikymmenille ennustetun lämpenemisen aiheuttamia muutoksia Suomen puutarhatuotannon menestymismahdollisuuksissa. Nykyilmaston osalta tarkastelu perustuu vuosien 1960-2006 päivittäisiin lumi- ja lämpötilahavaintoihin kymmenellä havaintopaikalla lounaisrannikolta Koillismaalle. Puutarhakasvien kannalta hyödyllisiä ja haitallisia ilmaston piirteitä pyrittiin kuvaamaan erilaisilla indekseillä, ns. kynnystapahtumien ajankohdilla ja erinäisten raja-arvojen ylittymisillä. Tulevaisuuden jaksojen 2010-39 ja 2040-69 osalta tilannetta tarkasteltiin A2- ja B1-skenaariossa. Työssä käytettiin ns. delta-menetelmää, missä 19 ilmastomallin keskiarvona saadut arviot kuukausikeskilämpötilojen noususta lisättiin havaintopaikkojen päivittäisiin vuosien 1971-2000 lämpötilahavaintoihin. Olosuhteet puutarhakasvien menestymiselle vaihtelevat paljon tarkastelussa olleella kolmelle kasvimaantieteelliselle vyöhykkeelle sijoittuvalla alueella. 1990-luvun alusta lisääntyneet leudot talvet näkyvät hyvin talvehtimisoloja kuvaavissa muuttujissa. Toisaalta havaintopaikkojen pienilmastolliset tekijät korostuvat erityisesti alueiden hallatilanteita tarkasteltaessa. Tulevaisuuden osalta monien puutarhakasvien talven selviytymisedellytyksiin vaikuttavien tekijöiden voidaan odottaa yleisesti parantuvan ilmaston lämmetessä, tosin Suomen ilmastossa pakkasvahinkojen riski on silti olemassa. Toisaalta entisestään leudontuvat talvet lämpöjaksoineen tulevat lisäämään mahdollisuutta kasvien kylmänkestävyyden heikkenemisestä aiheutuville ongelmille. Myöhäisten hallojen esiintymisen aiheuttamat vahingot riippuvat niitä edeltäneen ajan kasvuolosuhteista. Tällöin kasvukauden alun ajankohdassa, sen alkupuolen lämpimyydessä ja hallojen esiintymisen ajankohdassa tapahtuvien muutosten nettovaikutus ratkaisee myöhäisten hallatilanteiden kukinnalle muodostavan riskin tulevaisuudessa. Tästä ei saatu yksiselitteisiä tuloksia tämän tutkimuksen puitteissa, sillä hallariskiä kuvaavan indeksin käyttäytyminen oli varsin epämääräistä.

Suomessa esiintyvien lämpötilan ääriarvojen mallintaminen yksidimensioisilla ilmakehämalleilla

Tässä Pro Gradu -tutkielmassa oli tarkoitus määrittää ne lämpötilan ääriarvojen maksimi ja minimi arvot, jotka ovat vielä fysikaalisesti mahdollisia Suomen ilmastossa. Työssä käytettiin hyväksi kahta eri yksidimensioista ilmakehämallia, 1D-H634 sekä 1D-RCA3. Ensiksi mainittu pohjaa HIRLAM 6.3.4- malliin. Jälkimmäisessä mallissa HIRLAMin pintaprosessit on korvattu ruotsalaisen Rossby-keskuksen RCA3 -mallin fysiikalla. Tutkimukseen otettiin mukaan kaikki kolme luotausasemaa Suomesta (Jokioinen, Jyväskylä ja Sodankylä). Työ aloitettiin poimimalla Ilmatieteen laitoksen ilmastotietokannasta ne ajankohdat, joina kahden metrin lämpötila on ylittänyt kesällä +30°C ja alittanut talvella -35°C. Seuraavaksi etsittiin näitä ajanjaksoja vastaavat luotaustiedot. Luotauksia tutkimalla pyrittiin selvittämään mitkä tekijät vaikuttivat äärilämpötilojen esiintymiseen. Tämän jälkeen nämä luotaustiedot interpoloitiin vastaamaan mallin 40 vertikaalitasoa. Nämä tiedot syötettiin malleille yhdessä päivämäärän, kellonajan sekä koordinaattien kanssa ja tulokseksi saatiin vuorokauden kahden metrin lämpötilakäyrät. Koska yksidimensioiset mallit eivät ota huomioon lämmön advektiota, laskettiin Euroopan keskipitkien sääennusteiden keskuksen (ECMWF) ERA40-uusanalyysien pohjalta kyseisiä ajanhetkiä vastaavat lämmön advektiot. Lisäksi laskettiin keskimääräiset advektion vuorokausirytmit kesällä (kesä-heinä-elo) ja talvella (tammi-helmi). Suomesta saatujen luotaustietojen pohjalta tehtyjen ajojen kahden metrin lämpötilat eivät kesätilanteessa kyenneet ylittämään Turussa vuonna 1914 mitattua lämpötilaennätystä +35,9°C. Verrattaessa kuitenkin malliajojen tuloksia tehtyihin havaintoihin, voitiin kesätilanteissa todeta mallin antavan jopa 5°C lämpimämpiä arvoja kuin kyseisissä tilanteissa on mitattu. Lopuksi päätettiin tehdä malliajo, jossa luotaus otettiin Tallinnan lentoasemalta elokuulta 1992. Tämän luotaustiedon pohjalta tehdyn ajon tulos (+36,4°C) ylitti Suomessa havaitun lämpötilaennätyksen. Talvitilanteissa 1D-H634-malli ei puolestaan kyennyt saavuttamaan Suomen pakkasennätystä (-51,5°C), joka mitattiin Kittilässä vuonna 1999. Mallitetut pakkaslukemat olivat kuitenkin suurimmassa osassa ajoja kireämpiä kuin mitä kyseisten tilanteiden havainnot kertovat. Käytettäessä 1D-RCA3-mallia päästiin pakkasissa -53,8°C:seen ja pakkaslukemat olivat muutenkin paljon alhaisempia verrattuna 1D-H634- mallin tuloksiin.

Regio- and stereoselectivity of oxidative coupling reactions of phenols : Spirodienones as construction units in lignin

Dimeric phenolic compounds lignans and dilignols form in the so-called oxidative coupling reaction of phenols. Enzymes such as peroxidases and lac-cases catalyze the reaction using hydrogen peroxide or oxygen respectively as oxidant generating phenoxy radicals which couple together according to certain rules. In this thesis, the effects of the structures of starting materials mono-lignols and the effects of reaction conditions such as pH and solvent system on this coupling mechanism and on its regio- and stereoselectivity have been studied. After the primary coupling of two phenoxy radicals a very reactive quinone me-thide intermediate is formed. This intermediate reacts quickly with a suitable nucleophile which can be, for example, an intramolecular hydroxyl group or another nucleophile such as water, methanol, or a phenolic compound in the reaction system. This reaction is catalyzed by acids. After the nucleophilic addi-tion to the quinone methide, other hydrolytic reactions, rearrangements, and elimination reactions occur leading finally to stable dimeric structures called lignans or dilignols. Similar reactions occur also in the so-called lignification process when monolignol (or dilignol) reacts with the growing lignin polymer. New kinds of structures have been observed in this thesis. The dimeric com-pounds with so-called spirodienone structure have been observed to form both in the dehydrodimerization of methyl sinapate and in the beta-1-type cross-coupling reaction of two different monolignols. This beta-1-type dilignol with a spirodienone structure was the first synthetized and published dilignol model compound, and at present, it has been observed to exist as a fundamental construction unit in lignins. The enantioselectivity of the oxidative coupling reaction was also studied for obtaining enantiopure lignans and dilignols. A rather good enantioselectivity was obtained in the oxidative coupling reaction of two monolignols with chiral auxiliary substituents using peroxidase/H2O2 as an oxidation system. This observation was published as one of the first enantioselective oxidative coupling reaction of phenols. Pure enantiomers of lignans were also obtained by using chiral cryogenic chromatography as a chiral resolution technique. This technique was shown to be an alternative route to prepare enantiopure lignans or lignin model compounds in a preparative scale.

Titanium Complexes for the Polymerisation of Ethene and Caprolactone

The literature part of the thesis mainly reviews the results of the use of titanium catalysts for ethene and caprolactone polymerisation. The behaviour of titanium catalysts bearing phenoxy-imino ligands has been the focus of more detailed investigations in ethene polymerisation. Reasons for the production of multimodal polyethene for a range of catalysts are also given. The experimental part of the thesis is divided into two sections based on the monomers used in the polymerisations: Part A (ethene) and part B (caprolactone). Part A: Titanium(IV) complexes bearing phenoxy-imino ligands are known to possess high ethene polymerisation activities after MAO activation. Depending on the ligand, the activities of the catalysts in polymerisation can vary between 1 and 44000 kgPE/(mol*cat*h*bar). Depending on the polymerisation temperature and the electronic and steric properties of the catalyst ligands, low to high molar mass values and uni- and multimodal polydispersity values can been observed. In order to discover the reasons for these differences, 22 titanium(IV) complexes containing differently substituted phenoxy-imino derivatives as di- and tetradentate ligands were synthesised with high yields and used as homogeneous catalysts in ethene polymerisations. Computational methods were used to predict the geometry of the synthesised complexes and their configuration after activation. Based on the results obtained, the geometry of the catalyst together with the ligand substituents seem to play a major role in defining the catalytic activity. Novel titanium(IV) complexes bearing malonate ligands were also synthesised. Malonates are considered to be suitable ligand pre-cursors since they can be produced by the simple reaction of any primary or secondary alcohol with malonylchloride, and thus they are easily modifiable. After treatment with MAO these complexes had polymerisation activities between 10 and 50 kgPE/(mol*cat*h*bar) and surprisingly low polydispersity values when compared with similar types of catalysts bearing the O?O chelate ligand. Part B: One of the synthesis routes in the preparation of the above mentioned phenoxy-imino titanium dichloride complexes involved the use of Ti(NMe2)4 with a range of salicylaldimine type compounds. On reaction, these two compounds formed an intermediate product selectively and quantitatively which was active in the ring-opening polymerisation of caprolactone. Several mono-anionic alcoholates were also combined with Ti(NMe2)4 in different molar ratios and used as catalysts. Full conversion of the monomer was achieved within 15 minutes with catalysts having a co-ordination number of 4 while after 22 hours full conversion was achieved with catalysts having a co-ordination number of 6.

Cavity-enhanced laser spectroscopic studies of vibrational overtones of acetylene

This thesis contains five experimental spectroscopic studies that probe the vibration-rotation energy level structure of acetylene and some of its isotopologues. The emphasis is on the development of laser spectroscopic methods for high-resolution molecular spectroscopy. Three of the experiments use cavity ringdown spectroscopy. One is a standard setup that employs a non-frequency stabilised continuous wave laser as a source. In the other two experiments, the same laser is actively frequency stabilised to the ringdown cavity. This development allows for increased repetition rate of the experimental signal and thus the spectroscopic sensitivity of the method is improved. These setups are applied to the recording of several vibration-rotation overtone bands of both H(12)C(12)CH and H(13)C(13)CH. An intra-cavity laser absorption spectroscopy setup that uses a commercial continuous wave ring laser and a Fourier transform interferometer is presented. The configuration of the laser is found to be sub-optimal for high-sensitivity work but the spectroscopic results are good and show the viability of this type of approach. Several ro-vibrational bands of carbon-13 substituted acetylenes are recorded and analysed. Compared with earlier work, the signal-to-noise ratio of a laser-induced dispersed infrared fluorescence experiment is enhanced by more than one order of magnitude by exploiting the geometric characteristics of the setup. The higher sensitivity of the spectrometer leads to the observation of two new symmetric vibrational states of H(12)C(12)CH. The precision of the spectroscopic parameters of some previously published symmetric states is also improved. An interesting collisional energy transfer process is observed for the excited vibrational states and this phenomenon is explained by a simple step-down model.

Molecular Modelling of Estrogen-Producing Enzymes CYP450 Aromatase and 17beta-Hydroxysteroid Dehydrogenase Type 1

Breast cancer is the most common cancer in women in the western countries. Approximately two-thirds of breast cancer tumours are hormone dependent, requiring estrogens to grow. Estrogens are formed in the human body via a multistep route starting from cholesterol. The final steps in the biosynthesis include the CYP450 aromatase enzyme, converting the male hormones androgens (preferred substrate androstenedione ASD) into estrogens(estrone E1), and the 17beta-HSD1 enzyme, converting the biologically less active E1 into the active hormone 17beta-hydroxyestradiol E2. E2 is bound to the nuclear estrogen receptors causing a cascade of biochemical reactions leading to cell proliferation in normal tissue, and to tumour growth in cancer tissue. Aromatase and 17beta-HSD1 are expressed in or near the breast tumour, locally providing the tissue with estrogens. One approach in treating hormone dependent breast tumours is to block the local estrogen production by inhibiting these two enzymes. Aromatase inhibitors are already on the market in treating breast cancer, despite the lack of an experimentally solved structure. The structure of 17beta-HSD1, on the other hand, has been solved, but no commercial drugs have emerged from the drug discovery projects reported in the literature. Computer-assisted molecular modelling is an invaluable tool in modern drug design projects. Modelling techniques can be used to generate a model of the target protein and to design novel inhibitors for them even if the target protein structure is unknown. Molecular modelling has applications in predicting the activities of theoretical inhibitors and in finding possible active inhibitors from a compound database. Inhibitor binding at atomic level can also be studied with molecular modelling. To clarify the interactions between the aromatase enzyme and its substrate and inhibitors, we generated a homology model based on a mammalian CYP450 enzyme, rabbit progesterone 21-hydroxylase CYP2C5. The model was carefully validated using molecular dynamics simulations (MDS) with and without the natural substrate ASD. Binding orientation of the inhibitors was based on the hypothesis that the inhibitors coordinate to the heme iron, and were studied using MDS. The inhibitors were dietary phytoestrogens, which have been shown to reduce the risk for breast cancer. To further validate the model, the interactions of a commercial breast cancer drug were studied with MDS and ligand–protein docking. In the case of 17beta-HSD1, a 3D QSAR model was generated on the basis of MDS of an enzyme complex with active inhibitor and ligand–protein docking, employing a compound library synthesised in our laboratory. Furthermore, four pharmacophore hypotheses with and without a bound substrate or an inhibitor were developed and used in screening a commercial database of drug-like compounds. The homology model of aromatase showed stable behaviour in MDS and was capable of explaining most of the results from mutagenesis studies. We were able to identify the active site residues contributing to the inhibitor binding, and explain differences in coordination geometry corresponding to the inhibitory activity. Interactions between the inhibitors and aromatase were in agreement with the mutagenesis studies reported for aromatase. Simulations of 17beta-HSD1 with inhibitors revealed an inhibitor binding mode with hydrogen bond interactions previously not reported, and a hydrophobic pocket capable of accommodating a bulky side chain. Pharmacophore hypothesis generation, followed by virtual screening, was able to identify several compounds that can be used in lead compound generation. The visualisation of the interaction fields from the QSAR model and the pharmacophores provided us with novel ideas for inhibitor development in our drug discovery project.

Sexual reproduction in chydorid cladocerans (Anomopoda, Chydoridae) in southern Finland - implications for paleolimnology

The relationship between sexual reproduction of littoral chydorid cladocerans (Anomopoda, Chydoridae) and environmental factors in aquatic ecosystems has been rarely studied, although the sexual behavior of some planktonic cladocerans is well documented. Ecological monitoring was used to study the relationship between climate-related and non-climatic environmental factors and chydorid sexual reproduction patterns in nine environmentally different lakes that were closely situated to each other in southern Finland. Furthermore, paleolimnological ephippium analysis was used to clarify how current sexual reproduction is reflected in surface sediments of the same nine lakes. Additionally, short sediment cores from two of the lakes were studied with ephippium analysis to examine how recent climate-related and non-climatic environmental changes were reflected in chydorid sexual reproduction. Ephippium analysis uses the subfossil shells of asexual individuals to represent asexual reproduction and the shells of sexual females, i.e. ephippia, to represent sexual reproduction. The relative proportion of ephippia of all chydorid species, i.e. total chydorid ephippia (TCE) indicates the relative proportion of sexual reproduction during the open-water season. This thesis is part of the EPHIPPIUM-project which aims to develop ephippium analysis towards a quantitative climate reconstruction tool. To be able to develop a valid climate model, the influence of the environmental stressors other than climate on contemporary sexual reproduction and its reflection in sediment assemblages must be clarified so they can be eliminated from the model. During contemporary monitoring a few sexual individuals were observed during summer, apparently forced to sexual reproduction by non-climatic local environmental factors, such as crowding or invertebrate predation. Monitoring also revealed that the autumnal chydorid sexual reproduction period was consistent between the different lakes and climate-related factors appeared to act as the main inducers and regulators of autumnal sexual reproduction. However, during autumn, chydorid species and populations among the lakes exhibited a wide variation in the intensity, induction time, and length of autumnal sexual reproduction. These variations apparently act as mechanisms for local adaptations due to the genetic variability provided by sexual reproduction that enhance the ecological flexibility of chydorid species, allowing them to inhabit a wide range of environments. A large variation was also detected in the abundance of parthenogenetic and gamogenetic individuals during the open-water season among the lakes. On the basis of surface sediment samples, the general level of the TCE is ca. 3-4% in southern Finland, reflecting an average proportion of sexual reproduction in this specific climate. The variation in the TCE was much lower than could be expected on the basis of the monitoring results. This suggests that some of the variation detected by monitoring may derive from differences between sampling sites and years smoothed out in the sediment samples, providing an average of the entire lake area and several years. The TCE is always connected to various ecological interactions in lake ecosystems and therefore is always lake-specific. Hypothetically, deterioration of climate conditions can be detected in the TCE as an increase in ephippia of all chydorid species, since a shortening open-water season is reflected in the relative proportions of the two reproduction modes. Such an increase was clearly detected for the time period of the Little Ice Age in a sediment core. The paleolimnological results also indicated that TCE can suddenly increase due to ephippia of one or two species, which suggests that at least some chydorids can somehow increase the production of resting eggs under local environmental stress. Thus, some environmental factors may act as species-specific environmental stressors. The actual mechanism of the increased sexual reproduction seen in sediments has been unknown but the present study suggests that the mechanism is probably the increased intensity of gamogenesis, i.e. that a larger proportion of individuals in autumnal populations reproduce sexually, which results in a larger proportion of ephippia in sediments and a higher TCE. The results of this thesis demonstrate the utility of ephippium analysis as a paleoclimatological method which may also detect paleolimnological changes by identifying species-specific environmental stressors. For a quantitative TCE-based climate reconstruction model, the natural variation in the TCE of surface sediments in different climates must be clarified with more extensive studies. In addition, it is important to recognize the lakes where the TCE is not only a reflection of the length of the open-water season, but is also non-climatically forced. The results of ephippium analysis should always be interpreted in a lake-specific manner and in the context of other paleoecological proxies.

Spatial variation of climate and the impact of disturbances on local climate and forest recovery in northern Finland

The structure and function of northern ecosystems are strongly influenced by climate change and variability and by human-induced disturbances. The projected global change is likely to have a pronounced effect on the distribution and productivity of different species, generating large changes in the equilibrium at the tree-line. In turn, movement of the tree-line and the redistribution of species produce feedback to both the local and the regional climate. This research was initiated with the objective of examining the influence of natural conditions on the small-scale spatial variation of climate in Finnish Lapland, and to study the interaction and feedback mechanisms in the climate-disturbances-vegetation system near the climatological border of boreal forest. The high (1 km) resolution spatial variation of climate parameters over northern Finland was determined by applying the Kriging interpolation method that takes into account the effect of external forcing variables, i.e., geographical coordinates, elevation, sea and lake coverage. Of all the natural factors shaping the climate, the geographical position, local topography and altitude proved to be the determining ones. Spatial analyses of temperature- and precipitation-derived parameters based on a 30-year dataset (1971-2000) provide a detailed description of the local climate. Maps of the mean, maximum and minimum temperatures, the frost-free period and the growing season indicate that the most favourable thermal conditions exist in the south-western part of Lapland, around large water bodies and in the Kemijoki basin, while the coldest regions are in highland and fell Lapland. The distribution of precipitation is predominantly longitudinally dependent but with the definite influence of local features. The impact of human-induced disturbances, i.e., forest fires, on local climate and its implication for forest recovery near the northern timberline was evaluated in the Tuntsa area of eastern Lapland, damaged by a widespread forest fire in 1960 and suffering repeatedly-failed vegetation recovery since that. Direct measurements of the local climate and simulated heat and water fluxes indicated the development of a more severe climate and physical conditions on the fire-disturbed site. Removal of the original, predominantly Norway spruce and downy birch vegetation and its substitution by tundra vegetation has generated increased wind velocity and reduced snow accumulation, associated with a large variation in soil temperature and moisture and deep soil frost. The changed structural parameters of the canopy have determined changes in energy fluxes by reducing the latter over the tundra vegetation. The altered surface and soil conditions, as well as the evolved severe local climate, have negatively affected seedling growth and survival, leading to more unfavourable conditions for the reproduction of boreal vegetation and thereby causing deviations in the regional position of the timberline. However it should be noted that other factors, such as an inadequate seed source or seedbed, the poor quality of the soil and the intensive logging of damaged trees could also exacerbate the poor tree regeneration. In spite of the failed forest recovery at Tunsta, the position and composition of the timberline and tree-line in Finnish Lapland may also benefit from present and future changes in climate. The already-observed and the projected increase in temperature, the prolonged growing season, as well as changes in the precipitation regime foster tree growth and new regeneration, resulting in an advance of the timberline and tree-line northward and upward. This shift in the distribution of vegetation might be decelerated or even halted by local topoclimatic conditions and by the expected increase in the frequency of disturbances.

Traditionally Protected Forests and Sacred Forests of Zigua and Gweno Ethnic Groups in Tanzania

In Tanzania, indigenous forests can still be found whose existence is based on the management systems of precolonial society. This study covers material from over 900 forests. There are similar types of forests elsewhere in Africa, and similar forests can also be found in indigenous cultures on every continent. In this study they are called traditionally protected forests (TPFs). They have a high level of endemism and a rich biodiversity. The field study was carried out during the years 1997-2003 using participatory methods. An active debate is going on concerning the capacity of local communities to manage their environment. The role of indigenous people and their institutions in the development of the physical environment is a central issue in the debate. This study discusses the opportunities that the local people have had to decide on how to conserve, maintain, utilise, and manage their environment during different political periods. The study explains what kinds of changes have taken place in these forests and institutions in northeastern Tanzania among the matrilinear Zigua and patrilinear Gweno ethnic groups. About 2% of the land area of the communities was still protected by the precolonial structures. The communities have established their protection systems for different reasons, not only because of their beliefs but also because of different secular and clearly environmentally motivated reasons. There are different TPF types. Less than half of them are directly related to spirituality, and more than half are not. In earlier research elsewhere, it has been commonly understood that spiritual reasons played the main role in the protection of these environments. This study is also part of the postcolonial geographical discussion on the precolonial landscape and environmental management which was started by Carl Sauer. In the Zigua case study villages, only two out of five first comer clans have performed rain rituals in the past 30 years. Many of the most respected sacred sites do not have a ritual maker or even a person who knows how to perform rituals any longer. The same is happening with male initiation rites. In all case study villages there have been illegal cuts in the TPFs, but variations can be seen between the communities. The number of those who neither respect indigenous regulations nor accept indigenous penalties is growing. Positive developments have also taken place. Nowadays, the Forest Act of 2002 is in effect, which works as a cornerstone of community-based land ownership and also allows elders to protect TPFs, and by-laws are created with the support of different projects. Moreover, during the field study it was found that many young people are ignorant about their village's TPF sites, but interested in learning about their history and values.

Postglacial climate changes and vegetation responses in northern Europe

Postglacial climate changes and vegetation responses were studied using a combination of biological and physical indicators preserved in lake sediments. Low-frequency trends, high-frequency events and rapid shifts in temperature and moisture balance were probed using pollen-based quantitative temperature reconstructions and oxygen-isotopes from authigenic carbonate and aquatic cellulose, respectively. Pollen and plant macrofossils were employed to shed light on the presence and response rates of plant populations in response to climate changes, particularly focusing on common boreal and temperate tree species. Additional geochemical and isotopic tracers facilitated the interpretation of pollen- and oxygen-isotope data. The results show that the common boreal trees were present in the Baltic region (~55°N) during the Lateglacial, which contrasts with the traditional view of species refuge locations in the south-European peninsulas during the glacial/interglacial cycles. The findings of this work are in agreement with recent paleoecological and genetic evidence suggesting that scattered populations of tree species persisted at higher latitudes, and that these taxa were likely limited to boreal trees. Moreover, the results demonstrate that stepwise changes in plant communities took place in concert with major climate fluctuations of the glacial/interglacial transition. Postglacial climate trends in northern Europe were characterized by rise, maxima and fall in temperatures and related changes in moisture balance. Following the deglaciation of the Northern Hemisphere and the early Holocene reorganization of the ice-ocean-atmosphere system, the long-term temperature trends followed gradually decreasing summer insolation. The early Holocene (~11,700-8000 cal yr BP) was overall cool, moist and oceanic, although the earliest Holocene effective humidity may have been low particularly in the eastern part of northern Europe. The gradual warming trend was interrupted by a cold event ~8200 cal yr BP. The maximum temperatures, ~1.5-3.0°C above modern values, were attained ~8000-4000 cal yr BP. This mid-Holocene peak warmth was coupled with low lake levels, low effective humidity and summertime drought. The late Holocene (~4000 cal yr BP-present) was characterized by gradually decreasing temperatures, higher lake levels and higher effective humidity. Moreover, the gradual trends of the late Holocene were probably superimposed by higher-frequency variability. The spatial variability of the Holocene temperature and moisture balance patterns were tentatively attributed to the differing heat capacities of continents and oceans, changes in atmospheric circulation modes and position of sites and subregions with respect to large water bodies and topographic barriers. The combination of physical and biological proxy archives is a pivotal aspect of this work, because non-climatic factors, such as postglacial migration, disturbances and competitive interactions, can influence reshuffling of vegetation and hence, pollen-based climate reconstructions. The oxygen-isotope records and other physical proxies presented in this work manifest that postglacial climate changes were the main driver of the establishment and expansion of temperate and boreal tree populations, and hence, large-scale and long-term vegetation patterns were in dynamic equilibrium with climate. A notable exception to this pattern may be the postglacial invasion of Norway spruce and the related suppression of mid-Holocene temperate forest. This salient step in north-European vegetation history, the development of the modern boreal ecosystem, cannot be unambiguously explained by current evidence of postglacial climate changes. The results of this work highlight that plant populations, including long-lived trees, may be able to respond strikingly rapidly to changes in climate. Moreover, interannual and seasonal variation and extreme events can exert an important influence on vegetation reshuffling. Importantly, the studies imply that the presence of diffuse refuge populations or local stands among the prevailing vegetation may have provided the means for extraordinarily rapid vegetation responses. Hence, if scattered populations are not provided and tree populations are to migrate long distances, their capacity to keep up with predicted rates of future climate change may be lower than previously thought.

Precipitation-induced runoff and leaching from milled peat mining mires by peat types : a comparative method for estimating the loading of water bodies during peat pruduction

Precipitation-induced runoff and leaching from milled peat mining mires by peat types: a comparative method for estimating the loading of water bodies during peat production. This research project in environmental geology has arisen out of an observed need to be able to predict more accurately the loading of watercourses with detrimental organic substances and nutrients from already existing and planned peat production areas, since the authorities capacity for insisting on such predictions covering the whole duration of peat production in connection with evaluations of environmental impact is at present highly limited. National and international decisions regarding monitoring of the condition of watercourses and their improvement and restoration require more sophisticated evaluation methods in order to be able to forecast watercourse loading and its environmental impacts at the stage of land-use planning and preparations for peat production.The present project thus set out from the premise that it would be possible on the basis of existing mire and peat data properties to construct estimates for the typical loading from production mires over the whole duration of their exploitation. Finland has some 10 million hectares of peatland, accounting for almost a third of its total area. Macroclimatic conditions have varied in the course of the Holocene growth and development of this peatland, and with them the habitats of the peat-forming plants. Temperatures and moisture conditions have played a significant role in determining the dominant species of mire plants growing there at any particular time, the resulting mire types and the accumulation and deposition of plant remains to form the peat. The above climatic, environmental and mire development factors, together with ditching, have contributed, and continue to contribute, to the existence of peat horizons that differ in their physical and chemical properties, leading to differences in material transport between peatlands in a natural state and mires that have been ditched or prepared for forestry and peat production. Watercourse loading from the ditching of mires or their use for peat production can have detrimental effects on river and lake environments and their recreational use, especially where oxygen-consuming organic solids and soluble organic substances and nutrients are concerned. It has not previously been possible, however, to estimate in advance the watercourse loading likely to arise from ditching and peat production on the basis of the characteristics of the peat in a mire, although earlier observations have indicated that watercourse loading from peat production can vary greatly and it has been suggested that differences in peat properties may be of significance in this. Sprinkling is used here in combination with simulations of conditions in a milled peat production area to determine the influence of the physical and chemical properties of milled peats in production mires on surface runoff into the drainage ditches and the concentrations of material in the runoff water. Sprinkling and extraction experiments were carried out on 25 samples of milled Carex (C) and Sphagnum (S) peat of humification grades H 2.5 8.5 with moisture content in the range 23.4 89% on commencement of the first sprinkling, which was followed by a second sprinkling 24 hours later. The water retention capacity of the peat was best, and surface runoff lowest, with Sphagnum and Carex peat samples of humification grades H 2.5 6 in the moisture content class 56 75%. On account of the hydrophobicity of dry peat, runoff increased in a fairly regular manner with drying of the sample from 55% to 24 30%. Runoff from the samples with an original moisture content over 55% increased by 63% in the second round of sprinkling relative to the first, as they had practically reached saturation point on the first occasion, while those with an original moisture content below 55% retained their high runoff in the second round, due to continued hydrophobicity. The well-humified samples (H 6.5 8.5) with a moisture content over 80% showed a low water retention capacity and high runoff in both rounds of sprinkling. Loading of the runoff water with suspended solids, total phosphorus and total nitrogen, and also the chemical oxygen demand (CODMn O2), varied greatly in the sprinkling experiment, depending on the peat type and degree of humification, but concentrations of the same substances in the two sprinklings were closely or moderately closely correlated and these correlations were significant. The concentrations of suspended solids in the runoff water observed in the simulations of a peat production area and the direct surface runoff from it into the drainage ditch system in response to rain (sprinkling intensity 1.27 mm/min) varied c. 60-fold between the degrees of humification in the case of the Carex peats and c. 150-fold for the Sphagnum peats, while chemical oxygen demand varied c. 30-fold and c. 50-fold, respectively, total phosphorus c. 60-fold and c. 66-fold, total nitrogen c. 65-fold and c. 195-fold and ammonium nitrogen c. 90-fold and c. 30-fold. The increases in concentrations in the runoff water were very closely correlated with increases in humification of the peat. The correlations of the concentrations measured in extraction experiments (48 h) with peat type and degree of humification corresponded to those observed in the sprinkler experiments. The resulting figures for the surface runoff from a peat production area into the drainage ditches simulated by means of sprinkling and material concentrations in the runoff water were combined with statistics on the mean extent of daily rainfall (0 67 mm) during the frost-free period of the year (May October) over an observation period of 30 years to yield typical annual loading figures (kg/ha) for suspended solids (SS), chemical oxygen demand of organic matter (CODmn O2), total phosphorus (tot. P) and total nitrogen (tot. N) entering the ditches with respect to milled Carex (C) and Sphagnum (S) peats of humification grades H 2.5 8.5. In order to calculate the loading of drainage ditches from a milled peat production mire with the aid of these annual comparative values (in kg/ha), information is required on the properties of the intended production mire and its peat. Once data are available on the area of the mire, its peat depth, peat types and their degrees of humification, dry matter content, calorific value and corresponding energy content, it is possible to produce mutually comparable estimates for individual mires with respect to the annual loading of the drainage ditch system and the surrounding watercourse for the whole service life of the production area, the duration of this service life, determinations of energy content and the amount of loading per unit of energy generated (kg/MWh). In the 8 mires in the Köyhäjoki basin, Central Ostrobothnia, taken as an example, the loading of suspended solids (SS) in the drainage ditch networks calculated on the basis of the typical values obtained here and existing mire and peat data and expressed per unit of energy generated varied between the mires and horizons in the range 0.9 16.5 kg/MWh. One of the aims of this work was to develop means of making better use of existing mire and peat data and the results of corings and other field investigations. In this respect combination of the typical loading values (kg/ha) obtained here for S, SC, CS and C peats and the various degrees of humification (H 2.5 8.5) with the above mire and peat data by means of a computer program for the acquisition and handling of such data would enable all the information currently available and that deposited in the system in the future to be used for defining watercourse loading estimates for mires and comparing them with the corresponding estimates of energy content. The intention behind this work has been to respond to the challenge facing the energy generation industry to find larger peat production areas that exert less loading on the environment and to that facing the environmental authorities to improve the means available for estimating watercourse loading from peat production and its environmental impacts in advance. The results conform well to the initial hypothesis and to the goals laid down for the research and should enable watercourse loading from existing and planned peat production to be evaluated better in the future and the resulting impacts to be taken into account when planning land use and energy generation. The advance loading information available in this way would be of value in the selection of individual peat production areas, the planning of their exploitation, the introduction of water protection measures and the planning of loading inspections, in order to achieve controlled peat production that pays due attention to environmental considerations.

Controls on trace metals in urban stream sediments : implications for pollution monitoring using sediment chemistry data

Contamination of urban streams is a rising topic worldwide, but the assessment and investigation of stormwater induced contamination is limited by the high amount of water quality data needed to obtain reliable results. In this study, stream bed sediments were studied to determine their contamination degree and their applicability in monitoring aquatic metal contamination in urban areas. The interpretation of sedimentary metal concentrations is, however, not straightforward, since the concentrations commonly show spatial and temporal variations as a response to natural processes. The variations of and controls on metal concentrations were examined at different scales to increase the understanding of the usefulness of sediment metal concentrations in detecting anthropogenic metal contamination patterns. The acid extractable concentrations of Zn, Cu, Pb and Cd were determined from the surface sediments and water of small streams in the Helsinki Metropolitan region, southern Finland. The data consists of two datasets: sediment samples from 53 sites located in the catchment of the Stream Gräsanoja and sediment and water samples from 67 independent catchments scattered around the metropolitan region. Moreover, the sediment samples were analyzed for their physical and chemical composition (e.g. total organic carbon, clay-%, Al, Li, Fe, Mn) and the speciation of metals (in the dataset of the Stream Gräsanoja). The metal concentrations revealed that the stream sediments were moderately contaminated and caused no immediate threat to the biota. However, at some sites the sediments appeared to be polluted with Cu or Zn. The metal concentrations increased with increasing intensity of urbanization, but site specific factors, such as point sources, were responsible for the occurrence of the highest metal concentrations. The sediment analyses revealed, thus a need for more detailed studies on the processes and factors that cause the hot spot metal concentrations. The sediment composition and metal speciation analyses indicated that organic matter is a very strong indirect control on metal concentrations, and it should be accounted for when studying anthropogenic metal contamination patterns. The fine-scale spatial and temporal variations of metal concentrations were low enough to allow meaningful interpretation of substantial metal concentration differences between sites. Furthermore, the metal concentrations in the stream bed sediments were correlated with the urbanization of the catchment better than the total metal concentrations in the water phase. These results suggest that stream sediments show true potential for wider use in detecting the spatial differences in metal contamination of urban streams. Consequently, using the sediment approach regional estimates of the stormwater related metal contamination could be obtained fairly cost-effectively, and the stability and reliability of results would be higher compared to analyses of single water samples. Nevertheless, water samples are essential in analysing the dissolved concentrations of metals, momentary discharges from point sources in particular.