横截面压入时典型涂层界面的剥离行为

为发展涂层/基体界面结合性能表征方法,本文用横截面压入法对铝基喷涂Ni层(弱结合界面)和钢基电镀Cr层(强结合界面)进行对比性实验研究。结果发现,横截面压入时两种涂层都能与基体剥离,但界面裂纹形状存在明显差异。

Silicide formation and the interaction of metals with polycrystalline Si

The main factors affecting solid-phase Si-metal interactions are reported in this work. The influence of the orientation of the Si substrates and the presence of impurities in metal films and at the Si-metal interface on the formation of nickel and chromium silicides have been demonstrated. We have observed that the formation and kinetic rate of growth of nickel silicides is strongly dependent on the orientation and crystallinity of the Si substrates; a fact which, up to date, has never been seriously investigated in silicide formation. Impurity contaminations in the Cr film and at the Si-Cr interface are the most dominant influencing factors in the formation and kinetic rate of growth of CrSi₂. The potentiality and use of silicides as a diffusion barrier in metallization on silicon devices were also investigated.

Two phases, Ni₂Si and NiSi, form simultaneously in two distinct sublayers in the reaction of Ni with amorphous Si, while only the former phase was observed on other substrates. On (111) oriented Si substrates the growth rate is about 2 to 3 times less than that on <100> or polycrystalline Si. Transmission electron micrographs establish-·that silicide layers grown on different substrates have different microcrystalline structures. The concept of grain-boundary diffusion is speculated to be an important factor in silicide formation.

The composition and kinetic rate of CrSi₂ formation are not influenced by the underlying Si substrate. While the orientation of the Si substrate does not affect the formation of CrSi₂ , the purity of the Cr film and the state of Si-Cr interface become the predominant factors in the reaction process. With an interposed layer of Pd₂Si between the Cr film and the Si substrate, CrSi₂ starts to form at a much lower temperature (400°C) relative to the Si-Cr system. However, the growth rate of CrSi₂ is observed to be independent of the thickness of the Pd2Si layer. For both Si-Cr and Si-Pd₂Si-Cr samples, the growth rate is linear with time with an activation energy of 1.7 ± 0.1 ev.

A tracer technique using radioactive ³¹Si (T_1/2 = 2.26 h) was used to study the formation of CrSi₂ on Pd₂Si. It is established from this experiment that the growth of CrSi₂ takes place partly by transport of Si directly from the Si substrate and partly by breaking Pd₂Si bonds, making free Si atoms available for the growth process.

The role of CrSi₂ in Pd-Al metallization on Si was studied. It is established that a thin CrSi₂ layer can be used as a diffusion barrier to prevent Al from interacting with Pd₂Si in the Pd-Al metallization on Si.

As a generalization of what has been observed for polycrystalline-Si-Al interaction, the reactions between polycrystalline Si (poly Si) and other metals were studied. The metals investigated include Ni, Cr, Pd, Ag and Au. For Ni, Cr and Pd, annealing results in silicide formation, at temperatures similar to those observed on single crystal Si substrates. For Al, Ag and Au, which form simple eutectics with Si annealing results in erosion of the poly Si layer and growth of Si crystallites in the metal films.

Backscattering spectrometry with 2.0 and 2.3 MeV ⁴He ions was the main analytical tool used in all our investigations. Other experimental techniques include the Read camera glancing angle x-ray diffraction, scanning electron, optical and transmission electron microscopy. Details of these analytical techniques are given in Chapter II.

Caracterização físico-química e avaliação dos níveis de elementos-traço em sedimentos de manguezais das baías da Ilha Grande e de Sepetiba, RJ, por metodologias de digestão ácida assistidas por micro-ondas

O presente trabalho teve como objetivo principal comparar dois métodos de extração de elementos-traço em sedimentos que são assistidos por radiação micro-ondas. Foram coletadas amostras de sedimentos superficiais em um manguezal localizado na baía da Ilha Grande e em três manguezais localizados na baía de Sepetiba, RJ. As amostras de sedimentos coletadas foram secas, destorroadas e peneiradas. Sub-amostras foram submetidas a análises de caracterização física e química. Os métodos de extração de elementos-traço comparados foram o EPA-3051A e o método água régia assistido por micro-ondas. Os elementos-traço analisados foram: Cd, Cr, Cu, Ni, Pb e Zn. As concentrações dos elementos-traço nos extratos produzidos foram determinadas por FAAS (Espectrometria de absorção atômica com chama). Foram encontradas nos sedimentos dos manguezais estudados concentrações acima dos níveis estabelecidos pela Resolução CONAMA 344/2004 para os elementos-traço: Cd, Ni, Pb e Zn. Os resultados mostraram que as capacidades de extração de elementos-traço dos métodos EPA-3051A e água régia assistido por micro-ondas variam em função das características físico-químicas dos sedimentos. A análise estatística pela técnica de regressão linear simples mostrou que as duas metodologias são estatisticamente similares apenas para o Cr e os valores dos coeficientes de determinação (R2) obtidos obedeceram à seqüência: Cu > Pb > Zn > Ni > Cr > Cd. Na análise pela técnica estatística de regressão linear múltipla ocorreram melhorias estatisticamente significativas nos coeficientes de determinação quando foram incluídas as seguintes variáveis independentes: potencial redox e fósforo total para o Cd, argila para o Cr, areia para o Ni e fósforo total para o Pb e para o Zn

Comparação in vitro do desgaste dental em função da dureza de três diferentes tipos de materiais antagonistas

O objetivo deste estudo foi comparar in vitro o desgaste dental de pré-molares (PM) e molares (M) e sua relação com o valor de dureza Vickers dos materiais utilizados como antagonistas em uma máquina de abrasão simulada para provocar o desgaste nos dentes testados. Os materiais antagonistas utilizados foram VeraBond II (liga de Ni-Cr), Solidex (resina composta) e IPS Empress 2 (cerâmica). Para cada ensaio de dureza, foram preparados seis corpos-de-prova de cada material, os quais foram polidos sob refrigeração, com ciclo de 20 min para cada granulação. Num microdurômetro (HMV-2), foram realizadas três mossas por quadrante, cada uma sob carga de 19,614 N por 30 s, totalizando 12 mossas de base quadrada com ângulo de 136 entre os planos. O teste de abrasão foi realizado numa máquina simuladora de abrasão, freqüência de 265 ciclos/min e 4,4 Hz, com um percurso do antagonista de 10 mm à velocidade de 88 mm/s. Cada dente foi testado em oposição a um antagonista (foram 6 pares dente/material para cada grupo), em água deionizada, sob carga de 5 N, por 150 min, num total de 39.750 ciclos. Foram utilizados dezenove dentes 1 pré-molares, dezenove 3 molares e confeccionados doze antagonistas em cada material em forma de pastilha. Cada grupo de seis dentes foi testado em oposição a seis antagonistas do mesmo material. Ademais, um dente 1 pré-molar (PM) e um dente 3 molar (M) foram testados em oposição ao Plexiglass. Com relação ao desgaste do esmalte dentário (PM+M) segundo o material antagonista, o teste de Kruskal-Wallis evidenciou diferença significativa com p-valor < 0,001 e o teste de Mann-Whitney evidenciou diferença significativa nas comparações PM+M/resina X PM+M/metal (p-valor < 0,001), PM+M/resina X PM+M/cerâmica (p-valor < 0,001) e PM+M/metal X PM+M/cerâmica (p-valor = 0,002). A análise isolada, considerando pré-molares e molares separadamente, encontrou diferença significativa em relação ao desgaste do esmalte dentário no teste de Kruskall-Wallis, porém não detectou diferença significativa no teste de comparação múltipla Mann-Whitney quando comparou o desgaste sofrido pelo PM/metal em relação ao PM/cerâmica. Em relação à dureza Vickers detectou-se diferença significativa da dureza dos materiais no teste de Kruskall-Wallis (p-valor < 0,001) e também no teste de Mann-Whitney nas comparações múltiplas com p-valor = 0,002. Comparando-se a dureza com a perfilometria, observou-se uma correlação estatisticamente significativa (p ≤ 0,05) na correlação negativa (ρ= -0,829) entre a dureza do metal como material antagonista e o desgaste do esmalte dentário do dente molar. Os resultados sugeriram que todo material restaurador indireto estudado causou desgaste ao esmalte dentário quando submetido a forças de simulação de abrasão com carga. Embora tenha sido observada correlação entre dureza e resistência à abrasão, essa correlação foi pouco significativa.

固氮菌突变种DJ35钼铁蛋白和UW3细菌铁蛋白的纯化、特性、晶体生长及鉴定

一、棕色固氮菌突变种DJ35固氮酶钼铁蛋白的纯化、体外重组及结晶研究 　　棕色固氮菌(Azotobacter vinelandii Lipmann)突变种DJ35的菌体破碎后，所得的未经加热的粗提物经DEAE Cellulose 52柱层析后得到部分纯的钼铁蛋白（ΔnifE Av1）和铁蛋白(Av2)。部分纯的ΔnifE Av1再经Sephacryl S-300和Q-Sepharose Fast Flow柱层析进一步纯化，便首次得到SDS凝胶电泳检测为基本纯的ΔnifE Av1。SDS-PAGE及Western blotting的结果表明，ΔnifE Av1具有与野生型棕色固氮菌钼铁蛋白(OP Av1)相同的亚基种类和组成（α2β2）。质子还原活性测定表明，在与Av2进行活性互补时ΔnifE Av1不具有明显的质子还原活性，而与从OP Av1抽提出的FeMoco抽提液保温后便可与Av2实现活性互补。这表明，ΔnifE Av1是一种缺失FeMoco的钼铁蛋白。 　　将ΔnifE Av1用过量的邻菲啰啉(o-phenanthroline)厌氧处理并经Sephadex G-25柱层析分离后，便得到部分丢失Fe的ΔnifE Av1©。在同时存在Av2和MgATP发生系统的条件下，ΔnifE Av1©, 而不是处理前的ΔnifE Av1，可为由KMnO4或Na2CrO4、高柠檬酸铁、Na2S、Na2S2O4 和二硫苏糖醇组成的含Mn或含Cr重组液(RS-Mn或RS-Cr)显著激活，但在缺少MgATP或Av2的条件下，RS-Mn和RS-Cr则不能激活ΔnifE Av1©。这就表明，RS-Mn和RS-Cr对ΔnifE Av1©的激活都需要邻菲啰啉的预处理及Av2和MgATP的同时存在。从分别缺失nifZ和nifB点突变的固氮菌突变种DJ194和UW45中纯化得到的钼铁蛋白，ΔnifZ Av1和NifB- Av1，经邻菲啰啉厌氧处理并经Sephadex G-25柱层析分离后，也分别得到部分丢失Fe的ΔnifZ Av1©和NifB- Av1©。与ΔnifE Av1©一样，这两种蛋白在Av2和MgATP同时存在时也可被RS-Cr和含Mo重组液（RS-Mo）明显激活。 　　为获得可供X-射线衍射的ΔnifE Av1的大单晶，对组成蛋白质沉淀剂的各种化合物的种类和浓度、缓冲液的pH值、结晶方法及蛋白样品的批次、浓度等结晶条件进行了大量优化研究。首次获得了ΔnifE Av1的深棕色短斜四棱柱晶体，并对其蛋白组成进行了鉴定。 二、铬铁蛋白中残存的棕色固氮菌细菌铁蛋白的晶体生长及鉴定 　　从无钼、无氨而含铬的固氮培养基中生长的棕色固氮菌突变种UW3中纯化得到了部分纯的CrFe蛋白。在试图培养CrFe蛋白大晶体时发现，棕色晶体和砖红色晶体可同时或单独出现。SDS-和厌氧天然-PAGE皆表明，棕色晶体主要由与Av1类似大小的亚基（~60 kD）组成，而砖红色晶体则主要由~20 kD亚基组成。Western-blotting表明只有~60 kD亚基可与OP Av1的抗体发生反应，而~20 kD亚基则无这种反应。在部分纯的CrFe蛋白中，~20 kD的蛋白含量远低于~60 kD蛋白的含量，表明由这种小亚基组成的蛋白只是CrFe蛋白中的一种污染蛋白。用3,5-二氨基苯甲酸染色的天然电泳表明，形成砖红色和棕色晶体的蛋白是迁移率不同的两种含铁蛋白。质谱分析表明，该晶体蛋白为棕色固氮菌的细菌铁蛋白（AvBF）。分辨率为2.34 Å的X-射线衍射结果也表明，砖红色晶体属于H3空间群，晶胞参数为a = 124.965 Å, b= 124.965 Å 和 c = 287.406 Å。首次完成的结构解析也表明，这种砖红色晶体确为24聚体的AvBF。 关键词：棕色固氮菌突变种DJ35和UW3; ΔnifE Av1; 铬铁蛋白; 细菌铁蛋白; 纯化和特性; 体外激活组装; 晶体生长及组成鉴定

含铬或锰的新型固氮酶的纯化, 特性和结晶—棕色固氮菌突变种UW3中CrFe蛋白和MnFe蛋白的研究

以含MnSO4或Na2CrO4的无钼无氨的修改Burk’s培养基， 培养不能合成含钼固氮酶体系的棕色固氮菌 (Azotobacter vinelandii Lipmann) 突变种UW3， 发现在一定浓度范围内， MnSO4或Na2CrO4的加入有助于促进其生长。 菌体生长和C2H2还原活性曲线测定结果表明， 这种促进作用很可能是通过Mn或Cr取代Mo， 参与组装固氮酶中心原子簇， 从而影响固氮活性而实现的。 利用阴离子交换 (DEAE-52和Q-Sepharose FF) 和凝胶过滤 (Sephacryl S-200) 柱层析从两种菌体中纯化得到固氮酶组分Ⅰ蛋白 (分别命名为MnFe蛋白和CrFe蛋白)， 并对其进行了特性研究。 厌氧天然聚丙烯酰胺凝胶电泳 (PAGE) 和SDS-PAGE结果显示， 两种蛋白均为两种亚基组成的四聚体。 亚基可以与OP MoFe蛋白抗体发生免疫反应， 分子量分别略小于野生种OP MoFe蛋白的α和β亚基。 CrFe蛋白的C2H2还原活性， Ar下放氢活性和固氮活性分别相当于OP MoFe蛋白的36%， 38%和43%， 而MnFe蛋白活性相当于OP MoFe蛋白的50%左右， 并且两种蛋白与OP MoFe蛋白具有相似的固氮电子利用率。 对两种蛋白金属含量的测定证实其中分别含有Mn和Cr， 但仍存在少量Mo污染。 与OP MoFe蛋白相比，这两种蛋白圆二色谱的摩尔椭圆率 ([θ]) 除在450nm较接近外，在可见光区的其它波长处均显著降低。 与DT还原OP MoFe蛋白相似， CrFe蛋白和MnFe蛋白具有g≈4。3、3。7和2。0的特征EPR信号， 但各处信号强度比例不同。 在对污染Mo可能引起的信号进行校正后，CrFe蛋白的三个信号强度分别相当于DT还原OP MoFe蛋白的20%， 0%和10%， 而MnFe蛋白则分别相当于112%， 49%和65%。 上述结果表明， CrFe蛋白和MnFe蛋白与OP MoFe蛋白金属原子簇的主要差异很可能在于FeMco (M=Cr， Mn或Mo)的M种类， 而P-cluster结构和组成均未见大的差异。 利用气相扩散悬滴法对MnFe蛋白和CrFe蛋白结晶条件进行了筛选和初步优化， 确定了以Tris/Hepes， NaCl， MgCl2和PEG 8000为主要变量的沉淀剂体系， 寻找各组分对于晶体生长的最适浓度。 以此为基础探讨了应用气相扩散坐滴法和液-液扩散法对两种蛋白结晶条件的优化。 在一定条件下， 两种蛋白分别通过液-液扩散法获得了优质大单晶。 对从CrFe蛋白和MnFe蛋白制备物中培养出的蛋白质晶体的SDS-PAGE鉴定显示， 晶体由与OP MoFe蛋白相似的两种亚基组成。 通过 “神舟三号” 飞船搭载实验探讨了空间微重力对于厌氧蛋白质结晶的影响， 结果表明， 微重力有助于避免孪晶形成， 并具有长期培养后获得适于进行X-射线衍射分析的优质大单晶的潜在前景。 结合空间科学使固氮酶结构与功能研究得以发展， 这项工作是有意义并且可行的。

耐硫水煤气变换反应NiO-MoO_3-K_2CO_3/r-Al_2O_3催化剂研究

在本工作中，制备了一系列催化剂样品，其中有K、Ni、Mo单组份催化剂，K-Ni、K-Mo、Ni-Mo双组份催化剂及不同活性组份含量的K-Ni-Mo三组份催化剂。针对水煤气变换反应，对上述催化剂进行反应活性考察，得出如下结果：①催化剂各活性组份的最佳含量大致是NiO(3%), MoO_3(13%), K_2CO_3(6%)；②催化剂制备中的最佳焙烧温度在400 ℃左右；③催化剂使用前用H_2S/H_2的混和气进行预处理其效果最佳；④催化剂的催化活性与催化剂表面硫的含量有关，当催化剂表面处于严重缺硫状态时其活性下降；⑤反应的最佳汽:气 = 0.5-1.5；⑥加压有利于催化剂活性的提高，在加压情况下催化剂的活性随着反应温度的增加通过一极大值（在约200 ℃左右），不加压的反应催化剂活性随着反应温度的提高而增加。在催化剂的表征部分，利用XPS、XRD、紫外可见温反射光谱、SEM、ESR、比表面、TPR、酸度测定、TPD、TPS、TPS-TPR等实验对我们所制备的催化剂进行了研究。最后，我们用ESR和XRD实验技术研究了MoO_3、M_2CO_3 (M = Li、Na、K、Cs)-MoO_3加热过程中的固相反应，知道MoO_3在空气中焙烧时可以失去晶格氧，使晶体中的一些Mo~(6+)变成Mo~(5+)。在焙烧过程中，Li、Cs~+的加入将阻止MoO_3晶格氧向气相氧的转变，对Mo~(5+)的生成有抑制作用。加入一定量Na~+、K~+的MoO_3在焙烧过程中，其晶格氧被活化更易失去它们对Mo~(5+)的生成有促进作用，这种作用的大小是Na~+ > K~+。

环状有机磷化合物和一些过渡金属络合物的质谱研究

本文对两类新的含磷杂环化合物和几种过渡金属络合物进行了质谱研究。本文对两类有机磷化合物的EI谱和CI谱进行了研究。根据B/E， B~2/E联合扫描的亚稳测定和高分辨精确质量测量数据，以及质量选择的离子动能谱（MIKES）和碰撞诱导解离技术（CID）的结果，得出下述结论。1、4，5-二氧代-2-硫代-1，3，2，4-二氮二磷杂环戊烷的衍生物具有相似的质谱特征。它们的EI谱中均显示失去巯基的重要特性，[M-HS]~+离子为基峰离子。失巯基反应具有立体选择性，利用[M-HS]~+/[M]~+ （丰度tu）可区别该类化合物的异构体。它们的CI谱中基峰离子为质子化的准分子离子（甲烷为反应气）。2、4，5-二氧代-2-硫代-1，3，2，4-二氮二磷杂环戊烷的衍生物和4，5-二氧代-2-硫代-1，3，2，4-二氮二磷杂环戊烷的衍生物的质谱行为存在较大差异。它们的共性是都能失去中性异腈酸酯而使环开裂。3、1，3，2-二氮二磷杂环戊烷的衍生物EI谱中基峰离子均为失去2位磷上环外取代基的产物离子。它们的EI谱中存在较多的重排反应。其中包括氢重排和骨架重排。CI谱中只有含有P=S键的化合物准分子离子为基峰离子。本文对不同配体的Ni, Pd, Mo， W过渡金属络合物的研究结果表明：对于单核络合物，FAB谱显示分子离子峰（M~+）或[M+H-nCL]~+离子峰；双核络合物的FAB谱中显示[M+2H-CL]~+离子峰。含羰基和卤素CL配体的络合物，FAB谱以失去系列CO或CL为重要特征。

以金属为缓冲层在Si（111）上分子束外延GaN及其表征

用电子束蒸发方法在Si（111）衬底上蒸发了Au/Cr和Au/Ti/Al/Ti两种金属缓冲层,然后在金属缓冲层上用气源分子束外延（GSMBE）生长GaN.两种缓冲层的表面都比较平整和均匀,都是具有Au（111）面择优取向的立方相Au层.在Au/Cr/Si（111）上MBE生长的GaN,生长结束后出现剥离.在Au/Ti/Al/Ti/Si（111）上无AlN缓冲层直接生长GaN,得到的是多晶GaN;先在800℃生长一层AlN缓冲层,然后在710℃生长GaN,得到的是沿GaN（0001）面择优取向的六方相GaN.将Au/Ti/Al/Ti/Si（111）在800℃下退火20min,金属层收缩为网状结构,并且成为多晶,不再具有Au（111）方向择优取向.

Catalytic Activation of Mg-Doped GaN by Hydrogen Desorption Using Different Metal Thin Layers

The annealing of Mg-doped GaN with Pt and Mo layers has been found to effectively improve the hole concentration of such material by more than 2 times as high as those in the same material without metal. Compared with the Ni and Mo catalysts, Pt showed good activation effect for hydrogen desorption and ohmic contact to the Ni/Au electrode. Despite the weak hydrogen desorption, Mo did not diffuse into the GaNepilayer in the annealing process, thus suppressing the carrier compensation phenomenon with respect to Ni and Pt depositions, which resulted in the high activation of Mg acceptors. For the GaN activated with the Ni, Pt, and Mo layers, the blue emission became dominant, followed by a clear peak redshift and the degradation of photoluminescence signal when compared with that of GaN without metal.

鞍山铁矿区无土排岩场植物修复试验研究

针对鞍山大孤山排岩场由大小不一的石砾组成、无任何土壤、保水性能差、植物所需的营养成分极其贫乏、含有限制植物生长的有毒有害物质等特殊的立地条件，以营养成分丰富的城市污泥、粉煤灰等固体废弃物配制的人工土壤做为修复基质，通过室内模拟试验从人工土壤的保水性能、肥力水平和重金属含量及其活动性等方面研究粉煤灰钝化污泥用做无土排岩场植被再建的可行性，并进行了现场验证试验，结果表明： 采用当地城市生活污泥、粉煤灰以及铁矿尾砂为原料进行合理配比的人工土壤具有较好的持水保水性能；而且该人工土壤中有机质和速效氮、磷、钾的含量都极其丰富，处于高肥力水平；人工土壤的重金属含量符合国家农用标准。因此将这种养分含量较高的粉煤灰钝化污泥人工土壤用做无土排岩场生态修复的基质从理论上是可行的。 人工土壤熟化过程中对地下水的潜在影响研究表明：粉煤灰的加入有效抑制了污泥中氮素硝化作用的发生，同时也降低了钝化污泥人工土壤中SO42-、Cl-的浓度；人工土壤溶液中Cd、Pb、Cu、Zn、Ni、Cr、Mn平衡浓度均显著低于水质中重金属含量的毒害临界水平。因此，将该人工土壤用于鞍山大孤山排岩场植被再建，其土壤浸提溶液不会对地下水造成潜在威胁。 现场试验研究表明，钝化污泥人工土壤用做陡坡无土排岩场的修复基质适宜于乔木刺槐的生长，具有较好的植被成活率及生长势，该修复模式用于陡坡无土排岩场植被再建是可行的。

利用多重示踪技术研究正常鼠和肿瘤鼠的微量元素代谢(英文)

利用25 MeV/u40Ar +Se中能重离子核反应,制备包含24种元素在内的多重示踪剂,通过对元素γ谱的分析,研究了正常鼠和肿瘤鼠体内微量元素的分布及代谢。Mg,Sr, Ga, As,Sc, V, Cr, Mo, Co,Fe, Y,Zr, Nb和Ru等元素在肿瘤鼠的粪便和尿液中的排泄时间与正常鼠不同。肿瘤鼠与正常鼠相比,Na, Mn,Fe和Co的排泄变化较大,肿瘤鼠的排泄率较正常鼠高;而Ca, Y,Zr和Mo的排泄率肿瘤鼠则较正常鼠低;在正常鼠脏器、组织和血液样品中测出了Na,Rb,Ga,Sc, As,Zn, V,Cr, Mn,Co,Fe、Y,Zr, Tc, Ru, Ag和In等17种元素,肿瘤鼠检测出了除Zn和As之外的其它15种元素。几乎所有的元素在正常鼠中的吸收均比肿瘤鼠高。大部分元素分布在肝、肾和毛皮以及实体瘤中,而Fe和Na在肿瘤组织则没有检测到。

Experimental study of the beta-delayed proton decays of Er-145,Er-147

The beta-delayed proton decays of Er-145,Er-147 have been studied experimentally using the Ni-58 + Mo-92 reaction at beam energy of 383 MeV. On the basis of a He-jet apparatus coupled with a tape transport system, the beta-delayed proton radioactivities both from the nu s(1/2) ground state and the nu h(11/2) isomer in Er-145,Er-147 were observed by proton-gamma coincidence measurements. By analyzing the time distributions of the 4(+) -> 2(gamma)(+) transitions in the granddaughter nuclei Dy-144,Dy-146, the half-lives of 1.0 +/- 0.3 s and 1.6 +/- 0.2 s have been deduced for the nu h(11/2) isomers in Er-145,Er-147, respectively.

Properties of the beta-Delayed Proton Decay of Er-147

The beta-delayed proton decay of Er-147 is studied experimentally using the Ni-58+Mo-92 reaction at a beam energy of 383 MeV. Based on a He-jet apparatus coupled with a tape transport system, the beta-delayed proton radioactivities both from the nu s(1/2) ground state and the nu h(11/2) isomer in Er-147 are identified by proton-gamma coincidence measurements. By analyzing the time distribution of the 4(+) -> 2(+) gamma transition in the grand-daughter nucleus Dy-146, a half-life of 1.6 +/- 0.2 s is determined for the nu h(11/2) isomer in Er-147. The half-life for the ground state of Er-147 is estimated to be 3.2 +/- 1.2 s.

粉煤灰对钝化污泥重金属有效性影响

通过添加不同比例的粉煤灰对城市生活污泥进行钝化,系统的研究了粉煤灰对钝化污泥中金属元素Cd、Pb、Cu、Zn、Ni、Cr、Mn、Fe含量及其有效化的影响。结果表明:粉煤灰对污泥中有效态Cd、Pb、Ni、Cr、Mn、Fe具有钝化作用,其中对Cd和Fe的钝化效果最明显;但对Cu却有促进其向有效态转化的作用;总体上看钝化污泥人工土壤中重金属含量符合国家农用标准,而其中有效态Cd、Pb、Ni、C r的含量均远远低于对植物体造成毒害的临界水平。