NT-ProBNP levels in saliva and its clinical relevance to heart failure

Background: Current blood based diagnostic assays to detect heart failure (HF) have large intra-individual and inter-individual variations which have made it difficult to determine whether the changes in the analyte levels reflect an actual change in disease activity. Human saliva mirrors the body's health and well being and similar to 20% of proteins that are present in blood are also found in saliva. Saliva has numerous advantages over blood as a diagnostic fluid which allows for a non-invasive, simple, and safe sample collection. The aim of our study was to develop an immunoassay to detect NT-proBNP in saliva and to determine if there is a correlation with blood levels. Methods: Saliva samples were collected from healthy volunteers (n = 40) who had no underlying heart conditions and HF patients (n = 45) at rest. Samples were stored at -80 degrees C until analysis. A customised homogeneous sandwich AlphaLISA((R)) immunoassay was used to quantify NT-proBNP levels in saliva. Results: Our NT-proBNP immunoassay was validated against a commercial Roche assay on plasma samples collected from HF patients (n = 37) and the correlation was r(2) = 0.78 (p<0.01, y = 1.705 x +1910.8). The median salivary NT-proBNP levels in the healthy and HF participants were <16 pg/mL and 76.8 pg/mL, respectively. The salivary NT-proBNP immunoassay showed a clinical sensitivity of 82.2% and specificity of 100%, positive predictive value of 100% and negative predictive value of 83.3%, with an overall diagnostic accuracy of 90.6%. Conclusion: We have firstly demonstrated that NT-proBNP can be detected in saliva and that the levels were higher in heart failure patients compared with healthy control subjects. Further studies will be needed to demonstrate the clinical relevance of salivary NT-proBNP in unselected, previously undiagnosed populations.

Human saliva as a tool to investigate intimate partner violence

Human saliva mirrors body’s health and well-being and many of the biomolecules present in blood or urine can also be found in salivary secretions. However, biomolecular concentrations in saliva are usually one tenth to one thousandth of the levels in blood (Pfaffe et al., 2011). Sensitive detection technology platforms are therefore required to detect biomolecules in saliva. Another road block to the advancement of salivary diagnostics is the lack of information related to healthy state saliva vs. a diseased saliva, baseline levels and reference ranges and diurnal variations. Saliva has numerous advantages over blood or urine as a diagnostic fluid: (a) the non-invasive nature of sample collection and the simple, safe, painless and cost-effective methods to collect it; (b) unskilled personnel can collect saliva samples at multiple time points; and (c) the total protein concentration is approximately a quarter of that is present in plasma, which makes it easier to investigate low abundance proteins (Pfaffe et al., 2011). Currently, saliva assays are routinely used to determine, diseases such as HIV, drugs and substances of abuse to provide information on exposure and give qualitative information on the type of illicit drug used (Kintz et al., 2009), cortisol levels for diagnosing Cushing’s syndrome (Doi et al., 2008), and use for biomonitoring of exposure to chemicals (Caporossi et al., 2010) to measure hormones (Gröschl, 2009)....

Evaluation of saliva collection devices for the analysis of proteins

Background: Human saliva mirrors the body's health and can be collected non-invasively, does not require specialized skills and is suitable for large population based screening programs. The aims were twofold: to evaluate the suitability of commercially available saliva collection devices for quantifying proteins present in saliva and to provide levels for C-reactive protein (CRP), myoglobin, and immunoglobin E (IgE) in saliva of healthy individuals as a baseline for future studies. Methods: Saliva was collected from healthy volunteers (n = 17, ages 18-33 years). The following collection methods were evaluated: drool; Salimetrics (R) Oral Swab (SOS); Salivette (R) Cotton and Synthetic (Sarstedt) and Greiner Bio-One Saliva Collection System (GBO SCS (R)). We used AlphaLISA (R) assays to measure CRP, IgE and myoglobin levels in human saliva. Results: Significant (p<0.05) differences in the salivary flow rates were observed based on the method of collection, Le. salivary flow rates were significantly lower (p<0.05) in unstimulated saliva (Le. drool and SOS), when compared with mechanically stimulated methods (p<0.05) (Salivette (R) Cotton and Synthetic) and acid stimulated method (p<0.05) (SCS (R)). Saliva collected using SOS yielded significantly (p<0.05) lower concentrations of myoglobin and CRP, whilst, saliva collected using the Salivette (R) Cotton and Synthetic swab yielded significantly (p<0.05) lower myoglobin and IgE concentrations respectively. Conclusions: The results demonstrated significantly relevant differences in analyte levels based on the collection method. Significant differences in the salivary flow rates were also observed depending on the saliva collection method. The data provide preliminary baseline values for salivary CRP, myoglobin, and IgE levels in healthy participants and based on the collection method. (C) 2012 Elsevier B.V. All rights reserved.

Service-learning through multiple client-sponsored projects in an MBA marketing course

This paper outlines an approach for teaching Marketing Principles in an MBA course through service-learning to enable adult learners to connect the lectures’ marketing content to a real-world marketing project. During the course, 40 students in groups of four to five individuals were involved in eight different client-sponsored marketing projects executed simultaneously. The rationale, planning and management of this approach utilised current research on service-learning, living cases and client-sponsored projects in marketing education. The experimental curriculum design is presented in a timeline that mirrors the preparation and management of the group projects and the considerations to be taken into account when initiating and facilitating the projects. Reflections from this iteration of the service-learning design suggest the importance of: detailed project planning, the involvement of students in choosing the projects, the introduction of forms and feedback loops, the role of the instructor in facilitating the students and managing expectations, and the role of the company representative in supporting the groups.

Vertically stacked photovoltaic and thermal solar cell

According to some embodiments, the present invention provides a novel photovoltaic solar cell system from photovoltaic modules that are vertically arrayed in a stack format using thin film semiconductors selected from among org. and inorg. thin film semiconductors. The stack cells may be cells that are produced in a planar manner, then vertically oriented in an angular form, also termed herein tilted, to maximize the light capturing aspects. The use of a stack configuration system as described herein allows for the use of a variety of electrode materials, such as transparent materials or semitransparent metals. Light concn. can be achieved by using fresnel lens, parabolic mirrors or derivs. of such structures. The light capturing can be controlled by being reflected back and forth in the photovoltaic system until significant quantities of the resonant light is absorbed. Light that passes to the end and can be reflected back through the device by beveling or capping the end of the device with a different refractive index material, or alternatively using a reflective surface. The contacting between stacked cells can be done in series or parallel. According to some embodiments, the present invention uses a concentrator architecture where the light is channeled into the cells that contain thermal fluid channels (using a transparent fluid such as water) to absorb and hence reduce the thermal energy generation.

Pioneering use of narrative method in a first-year law course to provide an authentic, inquiry-based entry into the discipline of law

Law is saturated with stories. People tell their stories to lawyers; lawyers tell their client's stories to courts; and legislators develop regulation to respond to their constituent's stories of injustice or inequality. My approach to first-year legal education respects this narrative tradition. Both my curriculum design and assessment scheme in the compulsory first-year subject Australian Legal System deploy narrative methodology as the central teaching and learning device. Throughout the course, students work on resolving the problems of four hypothetical clients. Like a murder mystery, pieces of the puzzle come together as students learn more about legal institutions and the texts they produce, the process of legal research, the analysis and interpretation of primary legal sources, the steps in legal problem-solving, the genre conventions of legal writing style, the practical skills and ethical dimensions of professional practice, and critical inquiry into the normative underpinnings and impacts of the law. The assessment scheme mirrors this design. In their portfolio-based assignment, for example, students devise their own client profile, research the client's legal position and prepare a memorandum of advice.

Exploring accuracy factors in cost estimating practice towards implementing Building Information Modelling (BIM)

Cost estimating has been acknowledged as a crucial component of construction projects. Depending on available information and project requirements, cost estimates evolve in tandem with project lifecycle stages; conceptualisation, design development, execution and facility management. The premium placed on the accuracy of cost estimates is crucial to producing project tenders and eventually in budget management. Notwithstanding the initial slow pace of its adoption, Building Information Modelling (BIM) has successfully addressed a number of challenges previously characteristic of traditional approaches in the AEC, including poor communication, the prevalence of islands of information and frequent reworks. Therefore, it is conceivable that BIM can be leveraged to address specific shortcomings of cost estimation. The impetus for leveraging BIM models for accurate cost estimation is to align budgeted and actual cost. This paper hypothesises that the accuracy of BIM-based estimation, as more efficient, process-mirrors of traditional cost estimation methods, can be enhanced by simulating traditional cost estimation factors variables. Through literature reviews and preliminary expert interviews, this paper explores the factors that could potentially lead to more accurate cost estimates for construction projects. The findings show numerous factors that affect the cost estimates ranging from project information and its characteristic, project team, clients, contractual matters, and other external influences. This paper will make a particular contribution to the early phase of BIM-based project estimation.

Integration of Geospatial and Built Environment - National Data Policy

Digital technology offers enormous benefits (economic, quality of design and efficiency in use) if adopted to implement integrated ways of representing the physical world in a digital form. When applied across the full extent of the built and natural world, it is referred to as the Digital Built Environment (DBE) and encompasses a wide range of approaches and technology initiatives, all aimed at the same end goal: the development of a virtual world that sufficiently mirrors the real world to form the basis for the smart cities of the present and future, enable efficient infrastructure design and programmed maintenance, and create a new foundation for economic growth and social well-being through evidence-based analysis. The creation of a National Data Policy for the DBE will facilitate the creation of additional high technology industries in Australia; provide Governments, industries and citizens with greater knowledge of the environments they occupy and plan; and offer citizen-driven innovations for the future. Australia has slipped behind other nations in the adoption and execution of Building Information Modelling (BIM) and the principal concern is that the gap is widening. Data driven innovation added $67 billion to the Australian economy in 20131. Strong open data policy equates to $16 billion in new value2. Australian Government initiatives such as the Digital Earth inspired “National Map” offer a platform and pathway to embrace the concept of a “BIM Globe”, while also leveraging unprecedented growth in open source / open data collaboration. Australia must address the challenges by learning from international experiences—most notably the UK and NZ—and mandate the use of BIM across Government, extending the Framework for Spatial Data Foundation to include the Built Environment as a theme and engaging collaboration through a “BIM globe” metaphor. This proposed DBE strategy will modernise the Australian urban planning and the construction industry. It will change the way we develop our cities by fundamentally altering the dynamics and behaviours of the supply chains and unlocking new and more efficient ways of collaborating at all stages of the project life-cycle. There are currently two major modelling approaches that contribute to the challenge of delivering the DBE. Though these collectively encompass many (often competing) approaches or proprietary software systems, all can be categorised as either: a spatial modelling approach, where the focus is generally on representing the elements that make up the world within their geographic context; and a construction modelling approach, where the focus is on models that support the life cycle management of the built environment. These two approaches have tended to evolve independently, addressing two broad industry sectors: the one concerned with understanding and managing global and regional aspects of the world that we inhabit, including disciplines concerned with climate, earth sciences, land ownership, urban and regional planning and infrastructure management; the other is concerned with planning, design, construction and operation of built facilities and includes architectural and engineering design, product manufacturing, construction, facility management and related disciplines (a process/technology commonly known as Building Information Modelling, BIM). The spatial industries have a strong voice in the development of public policy in Australia, while the construction sector, which in 2014 accounted for around 8.5% of Australia’s GDP3, has no single voice and because of its diversity, is struggling to adapt to and take advantage of the opportunity presented by these digital technologies. The experience in the UK over the past few years has demonstrated that government leadership is very effective in stimulating industry adoption of digital technologies by, on the one hand, mandating the use of BIM on public procurement projects while at the same time, providing comparatively modest funding to address the common issues that confront the industry in adopting that way of working across the supply chain. The reported result has been savings of £840m in construction costs in 2013/14 according to UK Cabinet Office figures4. There is worldwide recognition of the value of bringing these two modelling technologies together. Australia has the expertise to exercise leadership in this work, but it requires a commitment by government to recognise the importance of BIM as a companion methodology to the spatial technologies so that these two disciplinary domains can cooperate in the development of data policies and information exchange standards to smooth out common workflows. buildingSMART Australasia, SIBA and their academic partners have initiated this dialogue in Australia and wish to work collaboratively, with government support and leadership, to explore the opportunities open to us as we develop an Australasian Digital Built Environment. As part of that programme, we must develop and implement a strategy to accelerate the adoption of BIM processes across the Australian construction sector while at the same time, developing an integrated approach in concert with the spatial sector that will position Australia at the forefront of international best practice in this area. Australia and New Zealand cannot afford to be on the back foot as we face the challenges of rapid urbanisation and change in the global environment. Although we can identify some exemplary initiatives in this area, particularly in New Zealand in response to the need for more resilient urban development in the face of earthquake threats, there is still much that needs to be done. We are well situated in the Asian region to take a lead in this challenge, but we are at imminent risk of losing the initiative if we do not take action now. Strategic collaboration between Governments, Industry and Academia will create new jobs and wealth, with the potential, for example, to save around 20% on the delivery costs of new built assets, based on recent UK estimates.

Criminal histories of crash and non-crash involved Queensland speeding offenders: Evidence supporting the idea that we drive as we live

Evidence increasingly suggests that our behaviour on the road mirrors our behaviour across other aspects of our life. The idea that we drive as we live, described by Tillman and Hobbs more than 65 years ago when examining off-road behaviours of taxi drivers (1949), is the focus of the current paper. As part of a larger study examining the impact of penalty changes on a large cohort of Queensland speeding offenders, criminal (lifetime) and crash history (10 year period) data for a sub-sample of 1000 offenders were obtained. Based on the ‘drive as we live’ maxim, it was hypothesised that crash-involved speeding offenders would be more likely to have a criminal history than non-crash involved offenders. Overall, only 30% of speeding offenders had a criminal history. However, crash-involved offenders were significantly more likely to have a criminal history (49.4%) than non-crash involved offenders (28.6%), supporting the hypothesis. Furthermore, those deemed ‘most at fault’ in a crash were the group most likely to have at least one criminal offence (52.2%). When compared to the non-crash involved offenders, those deemed ‘not most at fault’ in a crash were also more likely to have had at least one criminal offence (46.5%). Therefore, when compared to non-crash involved speeding offenders, those offenders involved in a crash were more likely to have been convicted of at least one criminal offence, irrespective of whether they were deemed ‘most at fault’ in that crash. Implications for traffic offender management and policing are discussed.

Phoenix activity: Regulatory challenges and the law

Remedying the mischief of phoenix activity is of practical importance. The benefits include continued confidence in our economy, law that inspires best practice among directors, and law that is articulated in a manner such that penalties act as a sufficient deterrent and the regulatory system is able to detect offenders and bring them to account. Any further reforms must accommodate and tolerate legal phoenix activity. Phoenix activity pushes tolerance of entrepreneurial activity to its absolute limits. The wisest approach would be to front end the reforms so as to alleviate the considerable detection and enforcement burden upon regulatory bodies. There is little doubt that breach of the existing law is difficult and expensive to detect; and this is a significant burden when regulators have shrinking budgets and are rapidly losing feet on the ground. This front end approach may need to include restrictions on access to limited liability. The more limited liability is misused, the stronger the argument to limit access to limited liability. This paper proposes that such an approach is a legitimate next step for a robust and mature capitalist economy.

Il mundus muliebris nelle fonti latine e nei contesti Pompeiani

The subject of the study is the classical Latin concept 'mundus muliebris', usually translated simply as women’s toiletry items. The task of the research is, on one hand, to find a more accurate and comprehensive literary definition for the concept as used in the early Imperial period, and on the other, to examine whether it is possible to find corresponding groupings of material objects among the finds from Pompeian houses destroyed by the eruption of Mount Vesuvius in AD 79. The study is based on two different bodies of evidence, literary and material, and consequently uses two independent methods of research. In the philological part of the study, all occurrences of the concept 'mundus muliebris' in classical Latin texts were identified and analysed in their proper literary context, paying special attention to information about the nature of the objects included (name, owner, quantity, value, location in the house). On the basis of this analysis, mirrors were chosen as the key elements of the archaeological research, being ̶ hypothetically ̶ the most probable objects to be found among any extant 'mundus muliebris' contexts in Pompeian houses. In the archaeological part of the study, all mirrors deposited in the Archaeological Storerooms of Pompeii, mostly unpublished, were examined, together with their original find contexts. For more detailed documentation, classification, as well as quantitative and functional analysis, the fifty-nine best preserved household or shop contexts were chosen. Among these contexts, only a few ‘ideal’ groups closely corresponding to the literary definitions were found. However, in most cases a functional artifact pattern of toiletry items could indeed be found grouped together with the mirror. The arrangement of the contexts in the domestic space also revealed a clear pattern. Firstly, the contexts consistently seem to be found in the place of storage, inside locked boxes, not in the place of use. Secondly, they show that for the storage of such objects small closed rooms flanking the main entrance of the house were preferred. Culturally, 'mundus muliebris' can be described as a very complex multi-layered concept intimately interrelated with the female gender, an instrument of its bodily creation and a symbol of its nature. Concretely, it has at its core mirrors and instruments for the care of skin and hair, and includes, in more technical definitions, washing equipment as well. In the Roman domus, lacking specific women’s quarters, this box containing toiletries and other personal objects could be defined as the true, although mobile, private space of the household’s female members.

The North in the Old English Orosius : A Geographical Narrative in Context

This doctoral dissertation examines the description of the North as it appears in the Old English Orosius (OE Or.) in the form of the travel accounts by Ohthere and Wulfstan and a catalogue of peoples of Germania. The description is discussed in the context of ancient and early medieval textual and cartographic descriptions of the North, with a special emphasis on Anglo-Saxon sources and the intellectual context of the reign of King Alfred (871-899). This is the first time that these sources, a multidisciplinary approach and secondary literature, also from Scandinavia and Finland, have been brought together. The discussion is source-based, and archaeological theories and geographical ideas are used to support the primary evidence. This study belongs to the disciplines of early medieval literature and (cultural) history, Anglo-Saxon studies, English philology, and historical geography. The OE Or. was probably part of Alfred s educational campaign, which conveyed royal ideology to the contemporary elite. The accounts and catalogue are original interpolations which represent a unique historical source for the Viking Age. They contain unparalleled information about peoples and places in Fennoscandia and the southern Baltic and sailing voyages to the White Sea, the Danish lands, and the Lower Vistula. The historical-philological analysis reveals an emphasis on wealth and property, rank, luxury goods, settlement patterns, and territorial divisions. Trade is strongly implied by the mentions of central places and northern products, such as walrus ivory. The references to such peoples as the Finnas, the Cwenas, and the Beormas appear in connection with information about geography and subsistence in the far North. Many of the topics in the accounts relate to Anglo-Saxon aristocratic culture and interests. The accounts focus on the areas associated with the Northmen, the Danes and the Este. These areas resonated in the Anglo-Saxon geographical imagination: they were curious about the northern margin of the world, their own continental ancestry and the geography of their homeland of Angeln, and they had an interest in the Goths and their connection with the southern Baltic in mythogeography. The non-judgemental representation of the North as generally peaceful and relatively normal place is related to Alfredian and Orosian ideas about the unity and spreading of Christendom, and to desires for unity among the Germani and for peace with the Vikings, who were settling in England. These intellectual contexts reflect the innovative and organizational forces of Alfred s reign. The description of the North in the OE Or. can be located in the context of the Anglo-Saxon worldview and geographical mindset. It mirrors the geographical curiosity expressed in other Anglo-Saxon sources, such as the poem Widsith and the Anglo-Saxon mappa mundi. The northern section of this early eleventh-century world map is analyzed in detail here for the first time. It is suggested that the section depicts the North Atlantic and the Scandinavian Peninsula. The survey of ancient and early medieval sources provides a comparative context for the OE Or. In this material, produced by such authors as Strabo, Pliny, Tacitus, Jordanes, and Rimbert, the significance of the North was related to the search for and definition of the northern edge of the world, universal accounts of the world, the northern homeland in the origin stories of the gentes, and Carolingian expansion and missionary activity. These frameworks were transmitted to Anglo-Saxon literary culture, where the North occurs in the context of the definition of Britain s place in the world.

Anisotropic gaussian beams

Anisotropic gaussian beams are obtained as exact solutions to the parabolic wave equation. These beams have a quadratic phase front whose principal radii of curvature are non-degenerate everywhere. It is shown that, for the lowest order beams, there exists a plane normal to the beam axis where the intensity distribution is rotationally symmetric about the beam axis. A possible application of these beams as normal modes of laser cavities with astigmatic mirrors is noted.

Arkeen pudonnut sibylla : Modernin naisen identiteetin rakentuminen Marja-Liisa Vartion romaanissa Kaikki naiset näkevät unia

A Sibyl fallen into everyday life. The enfolding of the identity of modern woman in Marja- Liisa Vartio s novel Kaikki naiset näkevät unia ( All Women Have Dreams ). --- Marja-Liisa Vartio played a remarkable part in renewing Finnish literature. My thesis examines her novel Kaikki naiset näkevät unia (1960), which describes the life of a middle-aged housewife, Mrs. Pyy ( Mrs. Hazel Hen ). She has moved from country to city and lives now in a suburb, in the Helsinki of the 1950 s. In Finnish literature, the novel is the first significant description of a modern city woman accomplished by modernistic means. My research examines the identity of a woman in the Finland of the 50 s, an epoch marked by the inevitable transition into modernity. My aim is to look into the ways in which the female identity enfolds in Kaikki naiset näkevät unia, how it takes its form, how it is described and commented. The primary method is contextual close reading; the novel is seen in the social, cultural and historical context of the time it was published. Essential elements in this study are literary motifs and images in the novel, and particularly transtextual relations as defined by Gérald Genette. The focus is on hypertextuality, intertextuality and paratextuality. Kaikki naiset näkevät unia emerges as a modern version of Madame Bovary by Gustave Flaubert. A woman s life spent in illusive dreaming is transferred from a 1900th century bourgeois town in France to a middle class Finnish suburb in the 1950 s. Vartio s novel is a variant of an ancient Finnish ballad I, a bird without a nest , making it into a modern narration of transition. The inner, mental journey from country to city is of great length, and the liminal life in a suburb does not make the passage any easier. Like the lyrical voices in the poetry of Edith Södergran, also Mrs. Pyy finds it hard to discover any values of sisterhood or those of ideal femininity in modern times. In earlier studies of Marja-Liisa Vartio s prose, stress has been laid on the discourse of her narrators and characters, as well as on its modern literary form. In this research, however, urgent allusions to paintings, old and new, are taken into account, since Mrs. Pyy mirrors herself against art, both classical and modern. Principal images in this context are Michelangelo s Sibyls in the ceiling of the Sistine Chapel, and a modern painting, which remains unidentified. Mrs. Pyy turns out to be a tragicomic character, who has magnanimous illusions about herself, but is compelled to accept the fact the she is only a mediocre person. She is nothing more than a first generation city dweller; she is not a modern, aloof outsider but a mere dilettante, who desperately tries to live out modern city life. Kaikki naiset näkevät unia is a striking picture of the 1950 s, a picture that is construed in the consciousness of Mrs. Pyy. We are shown everyday life growing more and more modern after the war and woman s role growing more and more subject to increasing pressure for change.