Incidence of Clostridium perfrigens in fishes

Fish collected from local landing centres and also from local markets were examined for the presence and enumeration of Clostridium perfringens. A medium described by Beerens et al. (1982) was used for the detection and enumeration of C. perfringens. C. perfringens occurs in low numbers in fishes compared to prawns. Proper handling of fishes after landing can reduce the chance of any public health hazard by C. perfringens.

Incidence of arthropods in dried fish products

Arthropods have been recorded from various types of insect infested dried fish products stored in the laboratory. They have been identified as Suidesia nesbetti Hughes (Acaridae) infesting dried anchovies and dried mussel, Dermestes ater Dermestidae coleoptera) attacking wet cured sardines and smoked catfish and Stegobium panicium infesting smoked catfish and dried mussel. Incidences of Stegobium panicium in dry fish products and Suidesia nesbetti in dried mussel has been recorded for the first time.

Incidence and low temperature survival of coagulase positive staphylococci in fishery products

Coagulase-positive staphylococci was found to be absent in all the frozen samples of lobsters, cuttle fish, cat fish, seer fish and red snapper examined. Coagulase-positive staphylococci were present in 38% of the cooked frozen shrimps and only 16% of the samples had staphylococci count more than 100/g. In the case of headless, peeled and deveined, peeled undeveined shrimps, the incidence of the organism was 6, 12 and 16% respectively. The study indicated that the incidence of coagulase-positive staphylococci is not a serious problem in frozen fishery products processed in this country. There was remarkable difference in the rate of destruction of coagulase-positive staphylococci in raw and cooked shrimps during freezing and frozen storage.

Incidence and low temperature survival of Salmonella in fishery products

Salmonella was isolated from 12% of PD shrimps, 10% of HL shrimps, 14% of PUD shrimps, 17% of lobsters, 14% of cuttle fish, 25% of cat fish and 20% of seer fish (all frozen) tested. One percent of the fish meal, 4% of dried non-penaeid prawn and 23% of sea beach sand showed incidence of the organism. Salmonella was also isolated from 2 and 4% of the swab samples of utensil surfaces and the floor surface of the processing hall respectively as well as from 1% of the process water tested. All the serotypes of Salmonella tested were resistant to freezing at -40°C, but during subsequent storage at -20°C, there was some difference between the serotypes with regard to their viability, S. paratyphi B being the most resistant which survived up to 9 months while S. saintpaul the least resistant having survival up to 5 months only.

THE SENSITIVITY OF 2D COMPRESSOR INCIDENCE RANGE TO IN-SERVICE GEOMETRIC VARIATION

The loss mechanisms which control 2D incidence range are discussed with an emphasis on determining which real in-service geometric variations will have the largest impact. For the majority of engine compressor blades (Minlet>0.55) both the negative and positive incidence limits are controlled by supersonic patches. It is shown that these patches are highly sensitive to the geometric variations close to, and around the leading edge. The variations used in this study were measured from newly manufactured as well as ex-service blades. Over most the high pressure compressor considered, it was shown that manufacture variations dominated. The first part of the paper shows that, despite large geometric variations (~10% of leading edge thickness), the incidence range responded in a linear way. The result of this is that the geometric variations have little effect on the mean incidence range of a row of blades. In the second part of the paper a region of the design space is identified where non-linear behavior can result in a 10% reduction in positive incidence range. The mechanism for this is reported and design guidelines for its avoidance offered. In the final part of the paper, the linear behavior at negative incidence and the transonic nature of the flow is exploited to design a robust asymmetric leading edge with a 5% increase in incidence range.

Microstructure and strain analysis of GaN epitaxial films using in-plane grazing incidence x-ray diffraction

This paper investigates the major structural parameters, such as crystal quality and strain state of (001)-oriented GaN thin films grown on sapphire substrates by metalorganic chemical vapour deposition, using an in-plane grazing incidence x-ray diffraction technique. The results are analysed and compared with a complementary out-of-plane x-ray diffraction technique. The twist of the GaN mosaic structure is determined through the direct grazing incidence measurement of (100) reflection which agrees well with the result obtained by extrapolation method. The method for directly determining the in-plane lattice parameters of the GaN layers is also presented. Combined with the biaxial strain model, it derives the lattice parameters corresponding to fully relaxed GaN films. The GaN epilayers show an increasing residual compressive stress with increasing layer thickness when the two dimensional growth stage is established, reaching to a maximum level of -0.89 GPa.

Normal incidence p-i-n Ge heterojunction photodiodes on Si substrate grown by ultrahigh vacuum chemical vapor deposition

We report on normal incidence p-i-n heterojunction photodiodes operating in the near-infrared region and realized in pure germanium on planar silicon substrate. The diodes were fabricated by ultrahigh vacuum chemical vapor deposition at 600 degrees C without thermal annealing and allowing the integration with standard silicon processes. Due to the 0.14% residual tensile strain generated by the thermal expansion mismatch between Ge and Si, an efficiency enhancement of nearly 3-fold at 1.55 mu m and the absorption edge shifting to longer wavelength of about 40 nm are achieved in the epitaxial Ge films. The diode with a responsivity of 0.23 A/W at 1.55 mu m wavelength and a bulk dark current density of 10 mA/cm(2) is demonstrated. These diodes with high performances and full compatibility with the CMOS processes enable monolithically integrating microphotonics and microelectronics on the same chip.

Using Fourier transform infrared grazing incidence reflectivity to study local vibrational modes in GaN

Both Fourier transform infrared (FTIR) grazing incidence reflectivity and FTIR transmission methods have been used to study GaN films grown on alpha-Al2O3 (0001) substrates by atmospheric pressure metal-organic chemical vapor deposition and low pressure metal-organic chemical vapor deposition. The results show that in the frequency range from 400 to 3500 cm(-1) the signal-to-noise ratio of the FTIR grazing incidence measurement is far higher than that of the FTIR transmission measurement. Some new vibrational structures appearing in the former measurement have been discussed. The features around 1460 and 1300 cm(-1) are tentatively assigned to scissoring and wagging local vibrational modes of CH2 in GaN, respectively. (C) 1999 American Institute of Physics. [S0021-8979(99)06509-3].

Normal-incidence intersubband (In, Ga)As/GaAs quantum dot infrared photodetectors

We report the device performance of normal-incidence (In, Ga)As/GaAs quantum dot intersubband infrared photodetectors. A primary intersubband transition peak is observed at the wavelength of 13 mu m (E-0 --> E-1) and a secondary peak at 11 mu m (E-0 --> E-2). The measured energy spacing in the conduction band of the quantum dots is in good agreement with low temperature photoluminescence measurement and calculations. A peak detectivity of 1 x 10(10) cm Hz(1/2)/W at 13 mu m was achieved at 40 K for these devices. (C) 1998 American Institute of Physics. [S0003-6951(98)01440-5].

Incidence of diverse integrons and beta-lactamase genes in environmental Enterobacteriaceae isolates from Jiaozhou Bay, China

Environmental microbiology investigation was performed to determine the molecular diversity of beta-lactamase genes among ampicillin-resistant bacteria from Jiaozhou Bay. beta-lactamase genes were detected in 93.8% of the bacterial isolates identified as Enterobacteriaceae. The most frequently detected gene was bla(TEM), followed by bla(SHV), bla(OAX-1), bla(MOX) and bla(CMY). Most of the isolates (68.8%) were positive for the intI1 integrase gene, and two isolates were also found for the intI2 gene. The dfr and aadA gene cassettes were predominant. Anthropogenic contamination from onshore sewage processing plants might contribute predominantly to the beta-lactamase gene reservoir in the studied coastal waters. Environmental antibiotic-resistant bacteria and resistance genes may serve as bioindicators of coastal environmental quality or biotracers of the potential contamination sources. This is the first report of the prevalence and characterization of beta-lactamase genes and integrons in coastal Enterobacteriaceae from China.

Internal structure of copper(II)-phthalocyanine thin films on SiO2/Si substrates investigated by grazing incidence x-ray reflectometry

Jenkins, Tudor; Brieva, A.C.; Jones, D.G.; Evans, D.A., (2006) 'Internal structure of copper(II)-phthalocyanine thin films on SiO2/Si substrates investigated by grazing incidence x-ray reflectometry', Journal of Applied Physics 99 pp.73504 RAE2008