RFID-based wireless passive sensors utilizing cork materials

This paper presents the design of low-cost, conformal UHF antennas and RFID tags on two types of cork substrates: 1) natural cork and 2) agglomerate cork. Such RFID tags find an application in wine bottle and barrel identification, and in addition, they are suitable for numerous antenna-based sensing applications. This paper includes the high-frequency characterization of the selected cork substrates considering the anisotropic behavior of such materials. In addition, the variation of their permittivity values as a function of the humidity is also verified. As a proof-of-concept demonstration, three conformal RFID tags have been implemented on cork, and their performance has been evaluated using both a commercial Alien ALR8800 reader and an in-house measurement setup. The reading of all tags has been checked, and a satisfactory performance has been verified, with reading ranges spanning from 0.3 to 6 m. In addition, this paper discusses how inkjet printing can be applied to cork surfaces, and an RFID tag printed on cork is used as a humidity sensor. Its performance is tested under different humidity conditions, and a good range in excess of 3 m has been achieved, allied to a good sensitivity obtained with a shift of >5 dB in threshold power of the tag for different humid conditions.

Humidity passive sensors based on UHF RFID using cork dielectric slabs

In this paper we show the design of passive UHF RFID tag antenna on cork substrate. Due to the cork sensitivity to humidity changes, we can use the developed sensor to sense changes in the relative humidity of the environment, without the need for batteries. The antenna is built using inkjet printing technology, which allows a good accuracy of the design manufacturing. The sensor proved usable for humidity changes detection with a variation of threshold power from 11 to 15 dB between 60 and near 100% humidity levels. Presenting, therefore, reading ranges between 3 to 5 meters. © 2015 EurAAP.

Perspectiva de la tecnología de comunicaciones RFID

Gestión del conocimiento

Modelo de canal y fuente de información para un sistema de control vehicular que utilizará tecnología RFID.

Tesis (Maestría en Ciencias de la Ingeniería Eléctrica con orientación en Control Automático) UANL, 2014.

Chipless RFID Tag Using Multiple Microstrip Open Stub Resonators

A novel compact RFID tag employing open stubs in a microstrip transmission line is proposed. The prototype of the tag is fabricated on a substrate of dielectric constant 4.4 and loss tangent 0.0018. The tag consists of microstrip open stub resonators and cross polarized transmitting and receiving disc monopole antennas. A prototype of 8 bit data encoded tag is demonstrated in this communication. Method for enhancing the performance of the RFID tag is also proposed. Magnitude or group delay response can be used to decode the tag informations

Frequency Coded Chipless RFID Tag using Spurline Resonators

A novel compact chipless RFID tag using spurline resonators is discussed in this paper. The detection of the tag's ID is using the spectral signature of a spurline resonator circuit. The tag has a data capacity of 8-bits in the range 2.38 to 4.04 GHz. The tag consists of a spurline multiresonating circuit and two cross polarized antennas. The prototype of the tag is fabricated on a substrate CMET/ LK4.3 of dielectric constant 4.3 and loss tangent 0.0018. The measured results show that group delay response can also be used to decode the tag’s identity

Design and Development of Compact Chipless RFID Tags with High Data Encoding Capacity

The main objective of this thesis is to develop a compact chipless RFID tag with high data encoding capacity. The design and development of chipless RFID tag based on multiresonator and multiscatterer methods are presented first. An RFID tag using using SIR capable of 79bits is proposed. The thesis also deals with some of the properties of SIR like harmonic separation, independent control on resonant modes and the capability to change the electrical length. A chipless RFID reader working in a frequency band of 2.36GHz to 2.54GHz has been designed to show the feasibility of the RFID system. For a practical system, a new approach based on UWB Impulse Radar (UWB IR) technology is employed and the decoding methods from noisy backscattered signal are successfully demonstrated. The thesis also proposes a simple calibration procedure, which is able to decode the backscattered signal up to a distance of 80cm with 1mW output power.

Design and Development of Spectral Signature Based Chipless RFID Tags

The main objective of this thesis is to design and develop spectral signature based chipless RFID tags Multiresonators are essential component of spectral signature based chipless tags. To enhance the data coding capacity in spectral signature based tags require large number of resonances in a limited bandwidth. The frequency of the resonators have to be close to each other. To achieve this condition, the quality factor of each resonance needs to be high. The thesis discusses about various types of multiresonators, their practical implementation and how they can be used in design. Encoding of data into spectral domain is another challenge in chipless tag design. Here, the technique used is the presence or absence encoding technique. The presence of a resonance is used to encode Logic 1 and absence of a speci c resonance is used to encode Logic 0. Di erent types of multiresonators such as open stub multiresonators, coupled bunch hairpin resonators and shorted slot ground ring resonator are proposed in this thesis.

Controlling und RFID - konzeptionelle Grundlagen, Nutzenpotenziale und empirische Analyse drahtloser Funkchips im Rahmen der Managementunterstützung

Die bereits seit einigen Jahren stark in der wissenschaftlichen Literatur diskutierte RFID-Technologie ermöglicht es, Informationen (echt-)zeitnah, detailliert und mit einer höheren Objektivität bereitzustellen. Der Fokus vieler Arbeiten lag dabei vor allem auf RFID-spezifischen Einsatzmöglichkeiten in den Bereichen des Supply Chain- und des Customer Relationship Managements. Aber auch für ein modernes Controlling bzw. für die Managementunterstützung sind Innovationen in der Informationstechnik – hier die Besonderheiten und Eigenschaften von RFID-Daten – von sehr hoher Bedeutung. Dieses Forschungsfeld hat bisher jedoch kaum Beachtung gefunden. Mit der vorliegenden Dissertationsschrift wird versucht, diese Forschungslücke sowohl konzeptionell als auch empirisch zu schließen. Sie gliedert sich zu diesem Zweck in vier Kapitel. Nach einer Einleitung werden im zweiten Kapitel die konzeptionellen Grundlagen geschaffen. Dazu werden verschiedene Controllingkonzeptionen vorgestellt und anhand ausgewählter Kriterien dahingehend überprüft, ob diese dazu geeignet sind, die RFID-Nutzenpotenziale im Controlling darzustellen. Der kontributionsorientierte Ansatz nach Link erweist sich hierbei als zweckmäßiger Controllingansatz. Im zweiten Grundlagenkapitel werden u. a. die Funktionsweise sowie verschiedene Vorteile der RFID-Technologie vorgestellt. Im Hauptkapitel wird zunächst der Stand der Controllingforschung in Bezug auf RFID sowie dessen Einordnung in das Controlling gezeigt. Im Anschluss daran folgt die Arbeit dem systematischen Aufbau des kontributionsorientierten Ansatzes wie folgt: - Harmonisation: RFID auf der Ebene der Unternehmensleitung - Harmonisationsunterstützung: RFID auf der Ebene des Controlling • RFID-Einfluss auf das Zielsystem: Sachziele, Formalziele und Sozialziele • RFID und Vorsteuerung • Der RFID-Beitrag zur Umsetzung der Controllingprinzipien: Entscheidungsfundierung, Koordinationsentlastung und Entscheidungsreflexion Da mit dem RFID-Beitrag zur Vorsteuerung die „Kernleistung“ eines modernen Controlling behandelt wurde, besitzt dieser Punkt eine besonders hohe Relevanz. Den Abschluss der Dissertationsschrift bildet eine empirische Untersuchung (Kapitel vier) zum Status Quo der Nutzung von RFID-Daten bzw. -Informationen im Controlling. Darüber hinaus wurden mögliche Problemfelder der RFID-Nutzung im Controlling respektive der Managementunterstützung offengelegt. Die Diskrepanz zwischen den im theoretischen Teil der Arbeit herausgearbeiteten vielfältigen Nutzenpotenzialen von RFID im Controlling und der tatsächlichen Nutzung von RFID-Daten im Controlling deutscher Unternehmen ist dabei ein wesentliches Ergebnis. Die Arbeit schließt mit einer Zusammenfassung der Ergebnisse und einem Ausblick auf den weiteren Forschungsbedarf (Kapitel fünf) ab.

Tecnología RFID en Colombia, un negocio con muchas oportunidades

Este trabajo busca identificar y definir porque la tecnología RFID puede ser un buen negocio de oportunidad en el mercado Colombiano, cada vez esté, está más enfocado en generar procesos de mejora continua que produzcan eficiencia al interior de las organizaciones, actualmente el uso de la tecnología es una herramienta clave para que las organizaciones se mantengan a la vanguardia. Con base en el estudio vemos que la tecnología RFID, genera eficiencia en el flujo de la información, mejora el control de inventarios y genera seguridad en estos, además de la disminución en los procesos y operaciones, e incrementa la velocidad en la toma de decisiones, por otro lado existe un mercado a explotar que es el de los hoteles, en la medida en que estos pueden controlar sus inventarios de objetos como sabanas, cobijas, etc. Evitando perder estos productos por robos. Un problema de esta tecnología son los altos costos, que impiden que empresas medianas y pequeñas puedan invertir en estos procesos.

How could construction supply chain benefit from RFID/GPS integration: a knowledge management perspective

Construction materials and equipment are essential building blocks of every construction project and may account for 50-60 per cent of the total cost of construction. The rate of their utilization, on the other hand, is the element that most directly relates to a project progress. A growing concern in the industry that inadequate efficiency hinders its success could thus be accommodated by turning construction into a logistic process. Although mostly limited, recent attempts and studies show that Radio Frequency IDentification (RFID) applications have significant potentials in construction. However, the aim of this research is to show that the technology itself should not only be used for automation and tracking to overcome the supply chain complexity but also as a tool to generate, record and exchange process-related knowledge among the supply chain stakeholders. This would enable all involved parties to identify and understand consequences of any forthcoming difficulties and react accordingly before they cause major disruptions in the construction process. In order to achieve this aim the study focuses on a number of methods. First of all it develops a generic understanding of how RFID technology has been used in logistic processes in industrial supply chain management. Secondly, it investigates recent applications of RFID as an information and communication technology support facility in construction logistics for the management of construction supply chain. Based on these the study develops an improved concept of a construction logistics architecture that explicitly relies on integrating RFID with the Global Positioning System (GPS). The developed conceptual model architecture shows that categorisation provided through RFID and traceability as a result of RFID/GPS integration could be used as a tool to identify, record and share potential problems and thus vastly improve knowledge management processes within the entire supply chain. The findings thus clearly show a need for future research in this area.

An analysis of security and privacy issues relating to RFID enabled ePassports

The European Union sees the introduction of the ePassport as a step towards rendering passports more secure against forgery while facilitating more reliable border controls. In this paper we take an interdisciplinary approach to the key security and privacy issues arising from the use of ePassports. We further anallyse how European data protection legislation must be respected and what additional security measures must be integrated in order to safeguard the privacy of the EU ePassport holder.

Elementary Petri net inside RFID distributed database (PNRD)

Usually, a Petri net is applied as an RFID model tool. This paper, otherwise, presents another approach to the Petri net concerning RFID systems. This approach, called elementary Petri net inside an RFID distributed database, or PNRD, is the first step to improve RFID and control systems integration, based on a formal data structure to identify and update the product state in real-time process execution, allowing automatic discovery of unexpected events during tag data capture. There are two main features in this approach: to use RFID tags as the object process expected database and last product state identification; and to apply Petri net analysis to automatically update the last product state registry during reader data capture. RFID reader data capture can be viewed, in Petri nets, as a direct analysis of locality for a specific transition that holds in a specific workflow. Following this direction, RFID readers storage Petri net control vector list related to each tag id is expected to be perceived. This paper presents PNRD cornerstones and a PNRD implementation example in software called DEMIS Distributed Environment in Manufacturing Information Systems.

RFID-based real-time smart waste management system

In an environmental context, the use of RFID (radio frequency identification) and load cell sensor technology can be employed for not only bringing down waste management costs, but also to facilitate automating and streamlining waste (e.g., garbage, recycling, and green) identification and weight measurement processes for designing smart waste management systems. In this paper, we outline a RFID and sensor model for designing a system in real-time waste management. An application of the architecture is described in the area of RFID and sensor based automatic waste identity, weight, and stolen bins identification system (WIWSBIS).