951 resultados para Cheese factories
Resumo:
The aim of this study was to investigate the effects of numerous milk compositional factors on milk coagulation properties using Partial Least Squares (PLS). Milk from herds of Jersey and Holstein- Friesian cattle was collected across the year and blended (n=55), to maximise variation in composition and coagulation. The milk was analysed for casein, protein, fat, titratable acidity, lactose, Ca2+, urea content, micelles size, fat globule size, somatic cell count and pH. Milk coagulation properties were defined as coagulation time, curd firmness and curd firmness rate measured by a controlled strain rheometer. The models derived from PLS had higher predictive power than previous models demonstrating the value of measuring more milk components. In addition to the well-established relationships with casein and protein levels, CMS and fat globule size were found to have as strong impact on all of the three models. The study also found a positive impact of fat on milk coagulation properties and a strong relationship between lactose and curd firmness, and urea and curd firmness rate, all of which warrant further investigation due to current lack of knowledge of the underlying mechanism. These findings demonstrate the importance of using a wider range of milk compositional variables for the prediction of the milk coagulation properties, and hence as indicators of milk suitability for cheese making.
Jersey milk suitability for Cheddar cheese production: process, yield, quality and financial impacts
Resumo:
The aim of this study was to first evaluate the benefits of including Jersey milk into Holstein-Friesian milk on the Cheddar cheese making process and secondly, using the data gathered, identify the effects and relative importance of a wide range of milk components on milk coagulation properties and the cheese making process. Blending Jersey and Holstein-Friesian milk led to quadratic trends on the size of casein micelle and fat globule and on coagulation properties. However this was not found to affect the cheese making process. Including Jersey milk was found, on a pilot scale, to increase cheese yield (up to + 35 %) but it did not affect cheese quality, which was defined as compliance with the legal requirements of cheese composition, cheese texture, colour and grading scores. Profitability increased linearly with the inclusion of Jersey milk (up to 11.18 p£ L-1 of milk). The commercial trials supported the pilot plant findings, demonstrating that including Jersey milk increased cheese yield without having a negative impact on cheese quality, despite the inherent challenges of scaling up such a process commercially. The successful use of a large array of milk components to model the cheese making process challenged the commonly accepted view that fat, protein and casein content and protein to fat ratio are the main contributors to the cheese making process as other components such as the size of casein micelle and fat globule were found to also play a key role with small casein micelle and large fat globule reducing coagulation time, improving curd firmness, fat recovery and influencing cheese moisture and fat content. The findings of this thesis indicated that milk suitability for Cheddar making could be improved by the inclusion of Jersey milk and that more compositional factors need to be taken into account when judging milk suitability.
Resumo:
Partial budgeting was used to estimate the net benefit of blending Jersey milk in Holstein-Friesian milk for Cheddar cheese production. Jersey milk increases Cheddar cheese yield. However, the cost of Jersey milk is also higher; thus, determining the balance of profitability is necessary, including consideration of seasonal effects. Input variables were based on a pilot plant experiment run from 2012 to 2013 and industry milk and cheese prices during this period. When Jersey milk was used at an increasing rate with Holstein-Friesian milk (25, 50, 75, and 100% Jersey milk), it resulted in an increase of average net profit of 3.41, 6.44, 8.57, and 11.18 pence per kilogram of milk, respectively, and this additional profit was constant throughout the year. Sensitivity analysis showed that the most influential input on additional profit was cheese yield, whereas cheese price and milk price had a small effect. The minimum increase in yield, which was necessary for the use of Jersey milk to be profitable, was 2.63, 7.28, 9.95, and 12.37% at 25, 50, 75, and 100% Jersey milk, respectively. Including Jersey milk did not affect the quantity of whey butter and powder produced. Althoug further research is needed to ascertain the amount of additional profit that would be found on a commercial scale, the results indicate that using Jersey milk for Cheddar cheese making would lead to an improvement in profit for the cheese makers, especially at higher inclusion rates.
Resumo:
In the present study, 24 samples of Minas Frescal cheese and 24 samples of Minas Padrao cheese produced in the North-east region of the state of Sao Paulo, Brazil, were analysed for aflatoxin M1 (AFM1) by high-performance liquid chromatography (HPLC) between March and August 2008. AFM1 was detected in 13 (27.1%) samples at concentrations ranging from 0.037 to 0.313 ng g-1. The mean concentrations of AFM1 in positive samples of Minas Frescal and Minas Padrao cheese were 0.142 +/- 0.118 and 0.118 +/- 0.054 ng g-1, respectively. It is concluded that the incidence of AFM1 in Minas cheese may contribute to an increase in the overall ingestion of aflatoxins in the diet, hence indicating the need for the adoption of a tolerance limit for AFM1 in cheese in Brazil.
Resumo:
The incidence of Listeria monocytogenes in three cheese manufacturing plants from the northeastern region of Sao Paulo, Brazil, was evaluated from October 2008 to September 2009. L. monocytogenes was found in samples from two plants, at percentages of 13.3% (n = 128) and 9.6% (n = 114). Samples of raw and pasteurized milk, water, and Minas Frescal cheese were negative for L. monocyto genes, although the pathogen was isolated from the surface of Prato cheese and in brine from one of the plants evaluated. L. monocytogenes was also isolated from different sites of the facilities, mainly in non food contact surfaces such as drains, floors, and platforms. Serotype 4b was the most predominant in the plants studied. The results of this study indicate the need for control strategies to prevent the dispersion of L. monocytogenes in the environment of cheese manufacturing plants.
Resumo:
An alternative method for determination of total trans fatty acids expressed as elaidic acid by capillary zone electrophoresis (CZE) under indirect UV detection at 224 nm within an analysis time of 7.5 min was developed. The optimized running electrolyte includes 15.0 mmol L(-1) KH(2)PO(4)/Na(2)HPO(4) buffer (pH similar to 7.0), 4.0 mmol L(-1) SDBS, 8.0 mmol L(-1) Brij35, 45%v/v ACN, 8% methanol, and 1.5% v/v n-octanol. Baseline separation of the critical pair C18-9cis/C18:1-9t: with a resolution higher than 1.5 was achieved using C15:0 as the internal standard. The optimum capillary electrophoresis (CE) conditions for the background electrolyte were established with the aid of Raman spectroscopy and experiments of a 3(2) factorial design. After response factor (R(F)) calculations, the CE method was applied to total trans fatty acid (TTFA) analysis in a hydrogenated vegetable fat (HVF) sample, and compared with the American Oil Chemists` Society (AOCS) official method by gas chromatography (GC). The methods were compared with an independent sample t test, and no significant difference was found between CE and GC methods within the 95% confidence interval for six genuine replicates of TTFA analysis (p-value > 0.05). The CE method was applied to TTFA analysis in a spreadable cheese sample. Satisfactory results were obtained, indicating that the optimized methodology can be used for trans fatty acid determination for these samples.
Resumo:
Trilha sonora componente do jogo “Armas e Barões (http://www.loa.sead.ufscar.br/armasebaroes.html)” desenvolvido pela equipe do Laboratório de Objetos de Aprendizagem da Universidade Federal de São Carlos (LOA/UFSCar).
Resumo:
The aim of this work was to identify the degradation compounds produced during irradiation of multilayer polyamide 6 (PA-6) films and to study their migration into water and 95% ethanol food simulant. After irradiation of multilayer PA-6 films at 3, 7 and 12 kGy, degradation compounds were extracted using solid-phase microextraction, for which the time and temperature of extraction and stirring were optimized, and identified by gas chromatography-mass spectrometry. Caprolactam, 2-cyclopentylcyclopentanone and aldehydes, among other compounds, were identified in the headspace of the films. Polydimethylsiloxane was considered the best fiber for extraction. The optimum conditions of time, temperature and stirring to extract the compounds were 20 min, 80 degrees C and 225 rpm. For validation purposes, the compounds were quantified in water and 95% ethanol and the results showed high sensitivity, good precision and accuracy. Migration of compounds from irradiated and non-irradiated multilayer PA-6 films into water and 95% ethanol food simulants was carried out at 40 degrees C for 10 days. The method was efficient for the quantification of decaldehyde, 2-cyclopentylcyclopentanone and caprolactam that migrated from multilayer PA-6 films into food simulants.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Pesquisou-se a ocorrência de Escherichia coli toxigênica, em queijo produzido com leite não pasteurizado, na Região Centro Oeste do Brazil. Foram utilizados 50 queijos adquiridos em diferentes supermercados. As amostras isoladas foram classificadas por sorogrupo, avaliadas em relação à sensibilidade para 13 agentes antimicrobianos e submetidas à reação em cadeia da polimerase para a presença de genes característicos de E. coli verotoxigênica (VTEC) e enterotoxigênica (ETEC). E. coli foi recuperada em 48(96,0%) dos queijos. Foram identificados os sorogrupos O125 (6,0%), O111 (4,0%), O55 (2,0%) e O119 (2,0%). Três (6,0%) amostras de E. coli foram classificadas como VTEC e uma (2,0%) como ETEC. Os maiores índices de resistência foram verificados para: cefalotina (60,0%), ácido nalidíxico (40,0%), doxiciclina (33,0%), tetraciclina (31,0%) e ampicilina (29,0%).
Resumo:
The aim of this study was analyze the (co)variance components and genetic and phenotypic relationships in the following traits: accumulated milk yield at 270 days (MY270,), observed until 305 days of lactation; accumulated milk yield at 270 days (MY270/A) and at 305 days (MY305), observed until 335 days of lactation; mozzarella cheese yield (MCY) and fat (FP) and protein (PP) percentage, observed until 335 days of lactation. The (co)variance components were estimated by Restricted Maximum Likelihood methodology in analyses single, two and three-traits using animal models. Heritability estimated for MY270, MY270/A, MY305, MCY, FP and PP were 0.22; 0.24, 0.25, 0.14, 0.29 and 0.40 respectively. The genetic correlations between MCY and the variables MY270, MY270/A, MY305, PP and FP was: 0.85; 1.00; 0.89; 0.14 and 0.06, respectively. This way, the selection for the production of milk in long period should increase MCY. However, in the search of animals that produce milk with quality, the genetic parameters suggest that another index should be composed allying these studied traits.