Designing a capstone experience for Australian legal education

Literature suggests that universities, and law schools in particular, are not engaging final year students in a genuine capstone experience which supports the development of their professional identity and their transition out of university. Students in their final year also face significant transition issues which are just as challenging as those facing first year students entering the tertiary environment (Jervis & Hartley, 2005, 314)...

The capstone experience in law

An effective capstone experience provides closure through: Supporting students to synthesise their learning in the program by building upon the knowledge, skills and capability development that has taken place over the entirety of the curriculum; Providing enhanced opportunities for students to reflect on their personal and professional development over the course of their legal education experience and how that prepares them for their future professional and personal lives; Assisting students to attain an understanding of what it means to be a graduate of the discipline and begin to develop a professional identity.

Putting the cart before the horse? Driving student engagement through first year career identity development in a large multidisciplinary creative industries cohort

It is now widely accepted that first year students benefit from pedagogies which mediate and support their transitions to university, and assist them to develop an adaptive student identity. We present an initiative which takes an alternative and additional approach to this way of viewing the first year experience. Based on research into creative industries career trajectories, this initiative focuses on the establishment of nascent career identity and professional self-concept amongst 600 first semester Bachelor of Creative Industries (BCI) students at QUT. The BCI is offered as a three year undergraduate program involving self-selection of majors, minors and electives, and also as a four year double degree with Business and Law faculties. Students engage in a scaffolded process of initial career visioning and reflective course planning, based on their own industry and careers research, guided by industry-active academic and careers staff, and drawing upon the experiences of final year students.

The history, content and evolution of The International Journal of the First Year in Higher Education

The International Journal of the First Year in Higher Education (Int J FYHE) began in 2010 with a specific FYHE focus and has published two issues per year with one issue linked to The International First Year in Higher Education Conference (FYHE Conference). This issue—Volume 6, Issue 1—is the last under this title. In 2015 the Journal will align to a new conference that has a broader focus on Students, Transitions, Achievement, Retention and Success (STARS). At this significant point and before we move on to the new journal, the journal team felt it was appropriate that the Feature in this final issue of the Int J FYHE should summarise the Journal’s activity over the years from 2010 to 2014.

The First-Year Law Experience: A New Beginning

The first-year experience at university is a "purgatorial zone”. There is the shock of the new: navigating a new campus, choosing and enrolling in courses, locating classrooms, finding new friends and establishing new social networks, buying arm loads of textbooks, making sense of subject outlines, balancing work and study, completing multiple assignments on time. But there are also the growing pains associated with intellectual development. Not only must first-year students take responsibility for their own learning; they must also accept that there are no "right" or "wrong" answers or "good" or "bad" positions, but judgements they must make and defend through analysis, reasoning and argument: ... the student [must] shift from passivity to activity; [university] is no longer an environment in which professors have the sole responsibility to teach but, rather; one in which the student has an equal responsibility to learn. They [need] . .. to becom[e] critical thinkers who are, in the words of Richard Paul and Linda Elder, "self-directed, self-disciplined, self-monitored, and self-corrective".

Pocket books of engagement : a 'just-in- time' framework for a high quality first year student experience

This paper describes a 'just-in-time' engagement framework for a high quality first year experience ('FYE'). The concept 'just-in-time' refers to a student-centered timeline for a managed learning environment based on the week-to-week experiences faced by a first year student in an Australian University semester. The engagement framework detailed in this paper consists of a series of teaching strategies embedded as part of a designed, integrated and co-ordinated first year program, expanding on the transition blueprint of Nelson, Kift, Humphreys & Harper (2006), working within a transition pedagogy (Kift, 2008) and implementing an institutional-wide program of collaborative engagement. This paper discusses the application of this framework to a first year foundational unit in the Bachelor of Laws degree at Deakin University, Victoria, Australia, implemented as part of an embedded institutional-wide transition program.

The learning experience of nursing students in a clinical setting

Analysed the experiences of nine baccalaureate degree nursing students in their final year of a School of Nursing in a small provincial acute hospital setting in New Zealand. The findings draw attention to the factors influencing the nursing student's learning experience, and create an awareness for favourable change.

Part-time employment trends for full-time undergraduate property and construction students : results of a two year sequential investigation

This paper reports on the initial findings of an investigation into the experiences and part-time work practices of undergraduates enrolled in the Bachelor of Property and Construction (BPC) and combined degree courses at the University of Melbourne. Initial data was collected from final year students during 2001 and for all four years of the course in 2002. The results suggest that students in earlier years of the course are more likely to work in non-industry (casual) related employment and work fewer hours. Students in later years of the BPC course are more likely to work in jobs in the construction industry and also to work longer hours than those in earlier years. An analysis of final year students shows that the students employed by contracting organisations work significantly more hours than students employed by other types of organisations including architectural practices. The consequences of part-time semester employment on academic performance and students' well-being are considered and proposals are put forward as to how to better manage the industry experience-University relationship.

Online peer mentoring with pre-service teachers : a learning experience

In 2010, 34 pre-service teachers at Deakin University were invited to use Web 2.0 technologies to support practicum in rural and regional schools. Students in their final year of the Bachelor of Education Primary course were given access to an online forum, a ‗ning‘, to facilitate development of mentoring relationships within a community of peers. Access to the ning was presented as an optional extra available only to students undertaking their professional experience in rural and regional settings. Based on the work of Le Cornu (2005), mentoring was framed as a collaborative and collegial arrangement through which participants could hone the interpersonal and critical reflection skills crucial to practicum. A ning was selected as it: 1) allowed the creation of a closed, protected social network with customised options, and 2) requires little technological skills and investment of time from participants in terms of setting up a profile and participating in the online community. These features seemed to make it an ideal platform for pre-service teachers to analyse and reflect on professional experience. However, the small pre-service cohort did not choose to access the site. This unexpected outcome seems to challenge contemporary discourses about the current generation‘s attitudes to web based technology. It also highlights the importance of coupling use of template-based online tools, such as the ning, with awareness of Bourdieu‘s (1977) social capital to ensure uptake. In capturing the learnings from the project and systematically reviewing relevant literature, this paper provides a set of recommendations for conceptualising and engaging pre-service teachers in the use of online forums.

Concurrent undergraduate study and industry employment - the Australian experience

Undergraduate education in Quantity Surveying (QS) and Construction Management (CM) in Australia has traditionally incorporated concurrent industry experience as an important requisite prior to graduation. This has been primarily driven by accrediting professional associations but most universities have also recognized the value of this cooperative approach to education with industry. However, in recent years many universities have become concerned about the amount of time that students are spending in industry employment to the point where, for some students, their employment takes precedence over their academic studies. Past research has shown that working long hours has a negative effect on the study patterns of undergraduate students. This paper presents the results of research undertaken to examine the amount of time that Quantity Surveying and Construction Management students actually spend engaged in paid work during semester time and the impact on their studies. The methodology for the research was based on two separate questionnaire surveys distributed to undergraduate Quantity Surveying and Construction Management students at 7 universities across Australia. The questionnaires focused on the nature and extent of their paid work while enrolled in full-time study. The results indicate that students in the early stages of their program tend to undertake casual work that is not related to their degree but move to construction industry employment in the later stages of their program. The research found that students were spending an average of 18 hours per week in industry employment with this average increasing to over 23 hours in their final year. A number of students were spending well over 30 hours per week in industry employment. The implications of the extent of this concurrent industry employment are discussed.

Influence of examiner's clinical experience on the reproducibility and accuracy of radiographic examination in detecting occlusal caries

The aim of this in vitro study was to assess the influence of varying examiner's clinical experience on the reproducibility and accuracy of radiographic examination for occlusal caries detection. Standardized bitewing radiographs were obtained from 166 permanent molars. Radiographic examination was performed by final-year dental students from two universities (A, n=5; B, n=5) and by dentists with 5 to 7 years of experience who work in two different countries (C, n=5; D, n=5). All examinations were repeated after 1-week interval. The teeth were histologically prepared and assessed for caries extension. For intraexaminer reproducibility, the unweighted kappa values were: A (0.11-0.40), B (0.12-0.33), C (0.47-0.58), and D (0.42-0.71). Interexaminer reproducibility statistics were computed based on means +/- SD of unweighted kappa values: A (0.07 +/- 0.05), B (0.12 +/- 0.09), C (0.24 +/- 0.08), and D (0.33 +/- 0.10). Sensitivity, specificity, and accuracy were calculated at D(1) and D(3) thresholds and compared by performing McNemar test (p=0.05). D(1) sensitivity ranged between 0.29 and 0.75 and specificity between 0.24 and 0.85. D(3) specificity was moderate to high (between 0.62 and 0.95) for all groups, with statistically significant difference between the dentists groups (C and D). Sensitivity was low to moderate (between 0.21 and 0.57) with statistically significant difference for groups B and D. Accuracy was similar for all groups (0.55). Spearman's correlations were: A (0.12), B (0.24), C (0.30), and D (0.38). In conclusion, the reproducibility of radiographic examination was influenced by the examiner's clinical experience, training, and dental education as well as the accuracy in detecting occlusal caries.

Influence of examiner's clinical experience on the reproducibility and accuracy of radiographic examination in detecting occlusal caries

The aim of this in vitro study was to assess the influence of varying examiner's clinical experience on the reproducibility and accuracy of radiographic examination for occlusal caries detection. Standardized bitewing radiographs were obtained from 166 permanent molars. Radiographic examination was performed by final-year dental students from two universities (A, n = 5; B, n = 5) and by dentists with 5 to 7 years of experience who work in two different countries (C, n = 5; D, n = 5). All examinations were repeated after 1-week interval. The teeth were histologically prepared and assessed for caries extension. For intraexaminer reproducibility, the unweighted kappa values were: A (0.11-0.40), B (0.12-0.33), C (0.47-0.58), and D (0.42-0.71). Interexaminer reproducibility statistics were computed based on means ± SD of unweighted kappa values: A (0.07 ± 0.05), B (0.12 ± 0.09), C (0.24 ± 0.08), and D (0.33 ± 0.10). Sensitivity, specificity, and accuracy were calculated at D(1) and D(3) thresholds and compared by performing McNemar test (p = 0.05). D(1) sensitivity ranged between 0.29 and 0.75 and specificity between 0.24 and 0.85. D(3) specificity was moderate to high (between 0.62 and 0.95) for all groups, with statistically significant difference between the dentists groups (C and D). Sensitivity was low to moderate (between 0.21 and 0.57) with statistically significant difference for groups B and D. Accuracy was similar for all groups (0.55). Spearman's correlations were: A (0.12), B (0.24), C (0.30), and D (0.38). In conclusion, the reproducibility of radiographic examination was influenced by the examiner's clinical experience, training, and dental education as well as the accuracy in detecting occlusal caries.

Measuring the benefits of a psychology placement year

Placement programmes are considered to provide students with an induction into the work environment and a valuable learning experience. Aston University maintains one of the highest success rates of any UK university for graduate employment and it is thought that the placement year plays a large role in this success. However, the benefits of placements in theoretical subjects like Psychology are often less obvious than those for practical subjects like Optometry or Engineering. Here we compared Psychology students on the 3-year vs. the 4-year sandwich course on a number of attributes using both quantitative and qualitative methodologies. Final year students who had taken a placement year achieved significantly higher marks in their final year (F 1,407=31.52, p<0.001) and were rated more favourably by academic staff on a measure of transferable skills (F1,43= 11.08, p<0.005). In addition, post-graduation, students who had taken a placement year reported a better idea of their career direction and could be argued to be further on in terms of their career progression and pay levels. Qualitatively, focus groups of placement and non-placement students suggested a number of benefits of taking a placement year, including better time management, confidence and responsibility. Whether the benefits of a sandwich placement in a psychology degree outweigh the costs to students and their families, and the need for further research to identify the scope and longevity of possible early career benefits are discussed. © 2006 Taylor & Francis.

Peer mentoring in higher education:a multidimensional approach to conceptualising the role of peer mentoring programmes in enhancing the first year undergraduate experience

Across the literature researchers agree that the concept of mentoring results in positive outcomes for both mentors and mentees alike (Enrich et al, 2004). From a pedagogical perspective, student focused mentoring activities in Higher Education are generally perceived to comprise dyadic or triadic relationships that encapsulate a diverse range of learning strategies and/or support mechanisms. Whilst there exists a significant amount of literature regarding the wider value of Peer Mentoring in Higher Education, there remains a notable gap in knowledge about the value of such programmes in enhancing the first year undergraduate experience and thus promoting a smooth transition to University. Using the emergent study findings of a large international project, a multidimensional conceptual framework bringing together the theoretical, conceptual and contextual determinants of Peer Mentoring is proposed. This framework makes a distinctive contribution to current pedagogical theory and practice – particularly in relation to the first year experience.