Study of natural ventilation for a modular façade system in wind tunnel tests

Wind tunnel tests are a reliable tool to determine the effect of natural ventilation on buildings. This paper presents results of wind tunnel tests conducted to evaluate the influence of ventilation modules positioning on a façade system. Modules positioning was modified, resulting in different façade configurations. The tests were carried out with the use of a model, varying the position of the ventilation modules in the façade configuration. The cases tested were six ventilation modules positioned below the window-sill (ventilated window-sill), and three ventilation modules positioned above and below the façade. The façade system proposed was movable and interchangeable so that the same basic model could be used to test the possibilities for ventilation. Wind speed measurements were taken inside and outside the model for the different façades configurations to evaluate the best performance in relation to natural ventilation. Singleâ sided and Cross ventilation were considered for wind speed measurements. Results show the use of six ventilation modules positioned below the window-sill, forming "a ventilated window-sill" is the best solution in terms of natural ventilation.

Solid-solid recuperation to improve the energy efficiency of tunnel kilns

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2011

Mathematical model to analyze the heat transfer in tunnel kilns for burning of ceramics

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2013

Testing the Tunnel Effect: Comparison, Age and Happiness in UK and German Panels

In contrast to previous results combining all ages we find positive effects of comparison income on happiness for the under 45s, and negative effects for those over 45. In the BHPS these coefficients are several times the magnitude of own income effects. In GSOEP they cancel to give no effect of effect of comparison income on life satisfaction in the whole sample, when controlling for fixed effects, and time-in-panel, and with flexible, age-group dummies. The residual age-happiness relationship is hump-shaped in all three countries. Results are consistent with a simple life cycle model of relative income under uncertainty.

Dorsal fractures of the triquetrum: MRI findings with an emphasis on dorsal carpal ligament injuries.

OBJECTIVE: The objective of our study was to report the MRI findings in dorsal fractures of the triquetrum, with an emphasis on dorsal carpal ligament injuries. MATERIALS AND METHODS: A total of 21 patients (16 men, five women; mean age, 41.9 years) with acute or subacute (≤ 6 weeks) dorsal triquetral fractures on radiography and MRI were included in this two-center retrospective study. MRI of the wrist was performed on 3-T units with transverse T1-weighted, coronal or transverse (or both) fat-suppressed T2weighted, transverse gadolinium-enhanced fat-suppressed T1-weighted turbo spin-echo, and 3D gadolinium-enhanced fat-suppressed T1-weighted gradient-recalled echo sequences. Three musculoskeletal radiologists evaluated the ulnar styloid process index (USPI) on radiographs and the following MRI features: fracture pattern (types 1-6), bone fragment size and displacement, bone marrow edema distribution, and dorsal carpal ligament tears. RESULTS: Eight type 1, one type 2, six type 3, five type 4, and one type 5 fractures were identified. These fractures were associated with 14 (66.7%), 17 (81.0%), and 16 (76.2%) tears of the dorsal radiocarpal, ulnotriquetral, and intercarpal ligaments, respectively. There was no correlation between bone marrow edema distribution and dorsal carpal ligament injuries (all p > 0.05). The mean (± SD) bone fragment volume and displacement were 205 ± 157 mm(3) and 1.0 ± 1.1 mm, respectively. The mean USPI was 0.21 ± 0.10. CONCLUSION: Dorsal fractures of the triquetrum are frequently associated with dorsal carpal ligament injuries. Bone marrow edema distribution is not correlated with these ligament tears.

Dorsal fractures of the Triquetrum : MRI findings with an emphasis on dorsal carpal ligament injuries

Contexte et but de l'étude: Les fractures du triquetrum sont les deuxièmes fractures des os du carpe en fréquence, après celles du scaphoïde. Elles représentent environ 3.5% de toutes les lésions traumatiques du poignet, et résultent le plus souvent d'une chute de sa hauteur avec réception sur le poignet en hyper-extension. Leur mécanisme physiopathologique reste débattu. La première théorie fut celle de l'avulsion ligamentaire d'un fragment osseux dorsal. Puis, Levy et coll. ainsi que Garcia-Elias ont successivement suggéré que ces fractures résultaient plutôt d'une impaction ulno-carpienne. De nombreux ligaments (intrinsèques et extrinsèques du carpe) s'insèrent sur les versants palmaires et dorsaux du triquetrum. Ces ligaments jouent un rôle essentiel dans le maintien de la stabilité du carpe. Bien que l'arthro-IRM du poignet soit l'examen de référence pour évaluer ces ligaments, Shahabpour et coll. ont récemment démontré leur visibilité en IRM tridimensionnelle (volumique) après injection iv. de produit de contraste (Gadolinium). L'atteinte ligamentaire associée aux fractures dorsales du triquetrum n'a jusqu'à présent jamais été évalué. Ces lésions pourraient avoir un impact sur l'évolution et la prise en charge de ces fractures. Les objectifs de l'étude étaient donc les suivants: premièrement, déterminer l'ensemble des caractéristiques des fractures dorsales du triquetrum en IRM, en mettant l'accent sur les lésions ligamentaires extrinsèques associées; secondairement, discuter les différents mécanismes physiopathologiques (i.e. avulsion ligamentaire ou impaction ulno-carpienne) de ces fractures d'après nos résultats en IRM. Patients et méthodes: Ceci est une étude rétrospective multicentrique (CHUV, Lausanne; Hôpital Cochin, AP-HP, Paris) d'examens IRM et radiographies conventionnelles du poignet. A partir de janvier 2008, nous avons recherché dans les bases de données institutionnelles les patients présentant une fracture du triquetrum et ayant bénéficié d'une IRM volumique du poignet dans un délai de six semaines entre le traumatisme et l'IRM. Les examens IRM ont été effectués sur deux machines à haut champ magnétique (3 Tesla) avec une antenne dédiée et un protocole d'acquisition incluant une séquence tridimensionnelle isotropique (« 3D VIBE ») après injection iv. de produit de contraste (Gadolinium). Ces examens ont été analysés par deux radiologues ostéo-articulaires expérimentés. Les mesures ont été effectuées par un troisième radiologue ostéo-articulaire. En ce qui concerne l'analyse qualitative, le type de fracture du triquetrum (selon la classification de Garcia-Elias), la distribution de l'oedème osseux post- traumatique, ainsi que le nombre et la distribution des lésions ligamentaires extrinsèques associées ont été évalués. Pour l'analyse quantitative, l'index du processus de la styloïde ulnaire (selon la formule de Garcia-Elias), le volume du fragment osseux détaché du triquetrum, et la distance séparant ce fragment osseux du triquetrum ont été mesurés.

Structural and functional characterization of (110)-oriented epitaxial La2/3Ca1/3MnO3 electrodes and SrTiO3 tunnel barriers

La2/3Ca1/3MnO3 (LCMO) films have been deposited on (110)-oriented SrTiO3 (STO) substrates. X-ray diffraction and high-resolution electron microscopy reveal that the (110) LCMO films are epitaxial and anisotropically in-plane strained, with higher relaxation along the [1¿10] direction than along the [001] direction; x-ray absorption spectroscopy data signaled the existence of a single intermediate Mn3+/4+ 3d-state at the film surface. Their magnetic properties are compared to those of (001) LCMO films grown simultaneously on (001) STO substrates It is found that (110) LCMO films present a higher Curie temperature (TC) and a weaker decay of magnetization when approaching TC than their (001) LCMO counterparts. These improved films have been subsequently covered by nanometric STO layers. Conducting atomic-force experiments have shown that STO layers, as thin as 0.8 nm, grown on top of the (110) LCMO electrode, display good insulating properties. We will show that the electric conductance across (110) STO layers, exponentially depending on the barrier thickness, is tunnel-like. The barrier height in STO (110) is found to be similar to that of STO (001). These results show that the (110) LCMO electrodes can be better electrodes than (001) LCMO for magnetic tunnel junctions, and that (110) STO are suitable insulating barriers.

Spin filtering through ferromagnetic BiMnO3 tunnel barriers

We report on experiments of spin filtering through ultrathin single-crystal layers of the insulating and ferromagnetic oxide BiMnO3 (BMO). The spin polarization of the electrons tunneling from a gold electrode through BMO is analyzed with a counterelectrode of the half-metallic oxide La2/3Sr1/3MnO3 (LSMO). At 3 K we find a 50% change of the tunnel resistances according to whether the magnetizations of BMO and LSMO are parallel or opposite. This effect corresponds to a spin-filtering efficiency of up to 22%. Our results thus show the potential of complex ferromagnetic insulating oxides for spin filtering and injection.

SrRuO3/SrTiO3/SrRuO3 heterostructures for magnetic tunnel junctions

We report on the growth and characterization of SrRuO3 single layers and SrRuO3/SrTiO3/SrRuO3 heterostructures grown on SrTiO3(100) substrates. The thickness dependence of the coercivity was determined for these single layers. Heterostructures with barrier thickness tb=1, 2.5, and 4 nm were fabricated, with electrodes having thickness ranging from 10 to 100 nm. The hysteresis loops of heterostructures with tb=2.5¿nm, 4 nm reveal uncoupled magnetic switching of the electrodes. Therefore, these heterostructures can be used for the fabrication of magnetic tunneling junctions.