Complexation of 2-acetylpyridine- and 2-benzoylpyridine-derived hydrazones to copper(II) as an effective strategy for antimicrobial activity improvement

Complexes [Cu(2AcPh)Cl]center dot 2H(2)O (1), [Cu(2AcpClPh)Cl]center dot 2H(2)O (2), [Cu(2AcpNO(2)Ph)Cl] (3), [Cu(2BzPh)Cl] (4). [Cu(2BzpClPh)Cl] (5) and [Cu(2BzpNO(2)Ph)Cl] (6) were obtained with 2-acetylpyridine-phenylhydrazone (H2AcPh), 2-acetylpyridine-para-chloro-phenylhydrazone (H2AcpClPh), 2-acetylpyridine-para-nitro-phenylhydrazone (H2AcpNO(2)Ph), 2-benzoylpyridine-phenylhydrazone (H2BzPh), 2-benzoylpyridine-para-chloro-phenylhydrazone (H2BzpClPh) and 2-benzoylpyridine-para-nitro-phenylhydrazone (H2BzpNO(2)Ph). The hydrazones showed poor antibacterial effect against Staphylococcus aureus, Enterococcus faecalis and Pseudomonas aeruginosa but demonstrated significant antifungal activity against Candida albicans. Upon coordination to copper(II) the antibacterial and antifungal activities appreciably increased. H2AcpClPh, H2BzpClPh and their copper(II) complexes (2) and (5), respectively, were as active as fluconazole against C. albicans. (C) 2012 Elsevier Ltd. All rights reserved.

Influence of the type of phospholipid head and of the conformation of the polyelectrolyte on the growth of calcium carbonate thin films on LB/LbL matrices

Calcium carbonate is one of the most important biominerals, and it is the main constituent of pearls, seashells, and teeth. The in vitro crystallization of calcium carbonate using different organic matrices as templates has been reported. In this work, the growth of calcium carbonate thin films on special organic matrices consisting of layer-by-layer (LbL) polyelectrolyte films deposited on a pre-formed phospholipid Langmuir-Blodgett (LB) film has been studied. Two types of randomly coiled polyelectrolytes have been used: lambda-carrageenan and poly(acrylic acid). A precoating comprised of LB films has been prepared by employing a negatively charged phospholipid, the sodium salt of dimyristoilphosphatidyl acid (DMPA), or a zwitterionic phospholipid, namely dimyristoilphosphatidylethanolamine (DMPE). This approach resulted in the formation of particulate calcium carbonate continuous films with different morphologies, particle sizes, and roughness, as revealed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The crystalline structure of the calcium carbonate particles was analyzed by Raman spectroscopy. The randomly coiled conformation of the polyelectrolytes seems to be the main reason for the formation of continuous films rather than CaCO3 isolated crystals. (C) 2012 Elsevier B.V. All rights reserved.

The processing of polyelectrolyte-covered magnetite nanoparticles in the form of nanostructured thin films

Magnetic nanoparticles are promising for a variety of applications, such as biomedical devices, spin electronics, magnetic data storage media, to name a few. However, these goals may only be reached if stable and organized structures are fabricated. In this article, we report on a single-step synthetic route with the coprecipitation method, in which iron oxide magnetic nanoparticles (Fe3O4 NPs) were stabilized in aqueous media using the poly(diallyldimethylammonium chloride) (PDAC) polyelectrolyte. The Fe3O4 NPs had a diameter of ca. 5 nm, according to transmission electron microscopy (TEM) images, being arranged in an inverse spinel structure typical of magnetite. An investigation with infrared spectroscopy indicated that the mechanisms of stabilization in the polymer matrix were based on the interaction between quaternary amide groups from PDAC and the nanoparticle surface. The Fe3O4-PDAC NPs exhibited considerable magnetic susceptibility, with a monotonic increase in the magnetization with decreasing temperature. These Fe3O4-PDAC NPs were immobilized in layer-by-layer (LbL) films, being alternated with layers of poly(vinylsulfonic acid) (PVS). The LbL films were much rougher than typical films made with polyelectrolytes, and Fe3O4-PDAC NPs have been responsible for the high electrocatalytic activity toward H2O2 reduction, with an overpotential shift of 0.69 V. Overall, the stability, magnetic properties and film-forming ability indicate that the Fe3O4-PDAC NPs may be used for nanoelectronics and bioelectrochemical devices requiring reversible and magnetic redox materials.

Strukturbildung doppelthydrophiler Blockcopolymere mit mehrwertigen organischen Gegenionen

Sowohl die Komplexierung von Polyelektrolyten mit anorganischen Salzen, als auch die mit entgegengesetzt geladenen Polymeren wurde von vielen Autoren bereits intensiv untersucht. Doch gerade mit Molekülen die zwischen diesen beiden Extremen liegen, sollte es möglich sein, durch elektrostatische Wechselwirkungen gezielt nanometergroße Teilchen definierter Struktur herzustellen. Ziel dieser Arbeit war es deshalb, die Strukturbildung doppelthydrophiler Blockcopolymere mit mehrwertigen organischen Gegenionen zu untersuchen und insbesondere Parameter für die Bildung supramolekularer Strukturen in wässriger Lösung zu finden. Als Blockcopolymer wurde dabei Polyethylenoxid-b-methacrylsäure mittels anionischer Polymerisation hergestellt und mittels Gelpermeationschromatographie (GPC) und Kernresonanzspektroskopie (NMR)charakterisiert. Die Strukturbildung des Polyelektrolyten mit mehrwertigen organischen Gegenionen wurde in pH = 6- und pH = 7-Pufferlösung mit dynamischer und statischer Lichtstreuung, Kleinwinkelneutronenstreuung und Ultrazentrifugation untersucht. Mit Diaminobenzidin als Gegenion wurden dabei sphärische Komplexe mit einem hydrodynamischen Radius um 100 nm erhalten und mit Ultrazentrifugation der Anteil des Gegenions im Komplex quantifiziert. Die schlechte Löslichkeit des Diaminobenzidins in wässrigem Medium erschwerte allerdings die Interpretation der Ergebnisse. Trotzdem deuten diese darauf hin, dass keine Kolloidbildung des Diaminobenzidins, sondern eine Komplexierung der Einzelmoleküle mit dem Copolymer vorliegt. Um Probleme mit der Löslichkeit zu vermeiden, wurden schliesslich Polyamidoamin-Dendrimere als Gegenionen verwendet. Dabei wurde in pH = 6- und pH = 7-Pufferlösung für Dendrimere der Generation 4 mit steigender Gegenionenkonzentration ein kontinuierlicher Anstieg des hydrodynamischen Radius bis zu einer Größe von 70 nm gefunden. Mit Kleinwinkelneutronenstreuung konnte eine ellipsoidale Struktur dieser Komplexe beobachtet werden. Auch die Größe der Gegenionen spielt für die Bildung supramolekularer Aggregate eine Rolle. So zeigte sich, dass für Polyamidoamin-Dendrimere der Generation 2, analog zu denen der Generation 4, ein Anstieg des hydrodynamischen Radius mit steigender Gegenionenkonzentration zu beobachten ist. Für Generation 0-Dendrimere hingegen wurde ein umgekehrter Verlauf beobachtet, welcher dem für Diaminobenzidin gleicht. Somit kann man annehmen, dass die Aggregation mit kleinen Molekülen zu einer anderen Struktur der Komplexe führt, als die mit größeren Molekülen.

The swelling behaviour of polyelectrolyte networks

Being basic ingredients of numerous daily-life products with significant industrial importance as well as basic building blocks for biomaterials, charged hydrogels continue to pose a series of unanswered challenges for scientists even after decades of practical applications and intensive research efforts. Despite a rather simple internal structure it is mainly the unique combination of short- and long-range forces which render scientific investigations of their characteristic properties to be quite difficult. Hence early on computer simulations were used to link analytical theory and empirical experiments, bridging the gap between the simplifying assumptions of the models and the complexity of real world measurements. Due to the immense numerical effort, even for high performance supercomputers, system sizes and time scales were rather restricted until recently, whereas it only now has become possible to also simulate a network of charged macromolecules. This is the topic of the presented thesis which investigates one of the fundamental and at the same time highly fascinating phenomenon of polymer research: The swelling behaviour of polyelectrolyte networks. For this an extensible simulation package for the research on soft matter systems, ESPResSo for short, was created which puts a particular emphasis on mesoscopic bead-spring-models of complex systems. Highly efficient algorithms and a consistent parallelization reduced the necessary computation time for solving equations of motion even in case of long-ranged electrostatics and large number of particles, allowing to tackle even expensive calculations and applications. Nevertheless, the program has a modular and simple structure, enabling a continuous process of adding new potentials, interactions, degrees of freedom, ensembles, and integrators, while staying easily accessible for newcomers due to a Tcl-script steering level controlling the C-implemented simulation core. Numerous analysis routines provide means to investigate system properties and observables on-the-fly. Even though analytical theories agreed on the modeling of networks in the past years, our numerical MD-simulations show that even in case of simple model systems fundamental theoretical assumptions no longer apply except for a small parameter regime, prohibiting correct predictions of observables. Applying a "microscopic" analysis of the isolated contributions of individual system components, one of the particular strengths of computer simulations, it was then possible to describe the behaviour of charged polymer networks at swelling equilibrium in good solvent and close to the Theta-point by introducing appropriate model modifications. This became possible by enhancing known simple scaling arguments with components deemed crucial in our detailed study, through which a generalized model could be constructed. Herewith an agreement of the final system volume of swollen polyelectrolyte gels with results of computer simulations could be shown successfully over the entire investigated range of parameters, for different network sizes, charge fractions, and interaction strengths. In addition, the "cell under tension" was presented as a self-regulating approach for predicting the amount of swelling based on the used system parameters only. Without the need for measured observables as input, minimizing the free energy alone already allows to determine the the equilibrium behaviour. In poor solvent the shape of the network chains changes considerably, as now their hydrophobicity counteracts the repulsion of like-wise charged monomers and pursues collapsing the polyelectrolytes. Depending on the chosen parameters a fragile balance emerges, giving rise to fascinating geometrical structures such as the so-called pear-necklaces. This behaviour, known from single chain polyelectrolytes under similar environmental conditions and also theoretically predicted, could be detected for the first time for networks as well. An analysis of the total structure factors confirmed first evidences for the existence of such structures found in experimental results.

Synthesis and characterization of polyelectrolyte brushes

On the pathway to synthesizing synthetic model systems for human cartilage, macroinitiators for the ATRP of styrene sulfonate esters with different chain lengths and initiation site densities from 10 % to 100 % were synthesized. Polymer brushes from styrene sulfonate ethyl ester and styrene sulfonate dodecyl ester with varying grafting density, backbone length and side chain length were synthesized and characterized by 1H-NMR, AUC, AFM, TEM, and in the case of the ethyl esters, GPC-MALLS. Polyelectrolyte brushes from styrene sulfonate were synthesized from the corresponding esters. These brushes were characterized in solution (GPC-MALLS, static and dynamic light scattering, SANS, 1H-NMR) and on solid interfaces (AFM and TEM). It was shown that these brushes may form extended aggregates in solution. The aggregation behavior and the size and shape of the aggregates depend on the side chain length and the degree of saponification. For samples with identical backbone and side chain length, but varying degrees of ester hydrolysis, marked differences in the aggregation behavior were observed. A functionalized ATRP macroinitiator with a positively charged head group was synthesized and employed for the synthesis of a functionalized polyelectrolyte brush. These brushes were found to form complexes with negatively charged latex particles and are thus suitable as proteoglycan models in the proteoglycan-hyaluronic acid complex.

Tensid- und Interpolyelektrolytkomplexe semiflexibler Polyelektrolyte

Hochgeladene semiflexible kationische und anionische Polyelektrolyte wurden mit niedermolekularen Tensiden zu Polyelektrolyt-Tensid-Komplexen (PETK) umgesetzt und in organischen Lösungsmitteln mit Streumethoden und Rasterkraftmikroskopie charakterisiert. Die synthetisierten PETK wurden anschließend, mit dem Ziel einer strukturkontrollierten Komplexbildung, für die Bildung von Interpolyelektrolytkomplexen (IPEK) in organischen Lösungsmitteln verwendet und anhand ihres Komplexbildungsverhaltens mit wässrigen Systemen verglichen. Die Umsetzung von zylindrischen Polymerbürsten mit Poly(styrolsulfonat)-, bzw. Poly(2-vinylpyridinium)-Seitenketten mit entgegengesetzt geladenen Tensiden verlief, trotz einer Graftingdichte von eins, quantitativ. Mit Streumethoden konnte gezeigt werden, dass die gebildeten PETK in Lösung als molekulare Zylinder vorliegen. Die Synthese von pUC19-DNA-Tensidkomplexen (DNA-TK), die sich in Alkoholen gut lösen, ist nur in stark basischer Lösung gelungen. Während der Charakterisierung der DNA-TK mit Streumethoden zeigte sich eine starke Abhängigkeit des Trägheitsradius von dem Verhältnis DNA-/Salz+. Die Bildung von IPEK aus hochgeladenen Polyelektrolyt-Bürsten bzw. PETK-Bürsten wurde an verschiedenen Beispielen in Wasser und DMF durchgeführt und mit Streumethoden verfolgt. Alle Systeme zeigten ein zu der IPEK-Bildung von linearen Polyelektrolyten analoges Komplexbildungsverhalten. Bei der Komplexierung von Poly(styrolsulfonat)-Bürsten-Tensidkomplexen mit kommerziellen Polyamidoamin-G5-Dendrimeren (PAMAM) oder Poly(ethylenoxid) modifizierten Poly(ethylenimin)-Bürsten hingegen wurden über den gesamten Gewichtsbruchbereich mit Streumethoden und AFM zylindrische Aggregate gefunden, die den Dimensionen der Poly(styrolsulfonat)-Bürsten-Tensidkomplexe entsprechen. Durch statistische Höhenanalyse der AFM-Bilder wurde ein linearer Zusammenhang zwischen der Komplexhöhe und dem Gewichtsbruch an PAMAM, bzw. PEI-PEO gefunden, der auf die Zunahme der Molmasse der Komplexe durch Wachstum entlang des Zylinderdurchmessers hindeutet. Die Bildung von Aggregaten, mit mehr als einem Polyanion, wurde nicht beobachtet.

Synthesis, characterization and chemical modification of a cationic polyelectrolyte poly(methylene amine)

Polyamine polymers have attracted attention due to their ability to demonstrate pH dependent cationic nature and presence of highly reactive pendant amino groups. These amino groups make them suitable for a host of applications through cross-linking and derivatization. As a result the end use application of a polyamine is largely driven by the number of amino groups and the way they are attached to the polymer backbone. Thus, this piece of work describes the synthesis and investigation of properties of a novel aliphatic polyamine, poly(methylene amine); that carries maximum number of amino group on its backbone. The target polymer, poly(methylene amine); was synthesized via two major steps viz.1.synthesis of precursor polymers of poly(methylene amine) and 2. Hydrolysis of the precursor polymers to obtain poly(methylene amine). The precursor polymers poly (1,3-diacetylimidazole-2-one)(6) and poly(1,3-diformyldihydroimidazol-2-one)(7) were synthesized via radical polymerization of their respective monomers. The monomers were polymerized in bulk as well as in solution at different reaction conditions. The maximum molecular weights were achieved by polymerizing the monomers in bulk (Mn = 6.5 x 104 g/mol and Mw = 2.13 x 105 g/mol) of 6. The precursor polymers were hydrolyzed under strong reaction conditions in ethanol in presence of NaOH, LiCl at 170°C to yield poly(methylene amine). The process of hydrolysis was monitored by IR spectroscopy. The solution properties of poly(methylene amine) and its hydrochloride were investigated by viscosimetry and light scattering. The reduced viscosity of poly (methylene amine) hydrochloride as a function of polymer concentration demonstrated a behavior typical of cationic polyelectrolyte. With decrease in polymer concentration the reduced viscosity of poly(methylene amine) hydrochloride increased gradually. The dynamic light scattering studies also revealed behaviors of a polyelectrolyte. Poly(methylene amine) was reacted with electrophiles to yield novel materials. While the attachment of alkyl group onto the nitrogen would increase nucleophilicity, it would also impose steric hindrance. As a result the degree of substitution on poly(methylene amine) would be governed by both the factors. Therefore, few model reactions with electrophiles were performed on polvinylamine under similar reaction conditions in order to make a comparative evaluation. It was found that under similar reaction conditions the degree of substitution was higher in case of polyvinylamine in comparison with poly (methylene amine).This shows that the steric hindrance outweighs nucleophilicity while deciding degree of substitution of electrophiles on poly(methylene amine). The modification was further extended to its use as an initiator for ring opening polymerization of benzyloxy protected N-carboxyanhydride of z-Lysine. The resulting polymer had an interesting brush like architecture. The solid state morphology of this polymer was investigated by SAXS. The 2D-WAXS diffractograms revealed hexagonal morphology of peptide segments without formation of alpha helices.

The collapse of linear polyelectrolyte chains in a poor solvent: When does a collapsing polyelectrolyte collect its counter ions?

The collapse of linear polyelectrolyte chains in a poor solvent: When does a collapsing polyelectrolyte collect its counter ions? The collapse of polyions in a poor solvent is a complex system and is an active research subject in the theoretical polyelectrolyte community. The complexity is due to the subtle interplay between hydrophobic effects, electrostatic interactions, entropy elasticity, intrinsic excluded volume as well as specific counter-ion and co-ion properties. Long range Coulomb forces can obscure single molecule properties. The here presented approach is to use just a small amount of screening salt in combination with a very high sample dilution in order to screen intermolecular interaction whereas keeping intramolecular interaction as much as possible (polyelectrolyte concentration cp ≤ 12 mg/L, salt concentration; Cs = 10^-5 mol/L). This is so far not described in literature. During collapse, the polyion is subject to a drastic change in size along with strong reduction of free counterions in solution. Therefore light scattering was utilized to obtain the size of the polyion whereas a conductivity setup was developed to monitor the proceeding of counterion collection by the polyion. Partially quaternized PVP’s below and above the Manning limit were investigated and compared to the collapse of their uncharged precursor. The collapses were induced by an isorefractive solvent/non-solvent mixture consisting of 1-propanol and 2-pentanone, with nearly constant dielectric constant. The solvent quality for the uncharged polyion could be quantified which, for the first time, allowed the experimental investigation of the effect of electrostatic interaction prior and during polyion collapse. Given that the Manning parameter M for QPVP4.3 is as low as lB / c = 0.6 (lB the Bjerrum length and c the mean contour distance between two charges), no counterion binding should occur. However the Walden product reduces with first addition of non solvent and accelerates when the structural collapse sets in. Since the dielectric constant of the solvent remains virtually constant during the chain collapse, the counterion binding is entirely caused by the reduction in the polyion chain dimension. The collapse is shifted to lower wns with higher degrees of quaternization as the samples QPVP20 and QPVP35 show (M = 2.8 respectively 4.9). The combination of light scattering and conductivity measurement revealed for the first time that polyion chains already collect their counter ions well above the theta-dimension when the dimensions start to shrink. Due to only small amounts of screening salt, strong electrostatic interactions bias dynamic as well as static light scattering measurements. An extended Zimm formula was derived to account for this interaction and to obtain the real chain dimensions. The effective degree of dissociation g could be obtained semi quantitatively using this extrapolated static in combination with conductivity measurements. One can conclude the expansion factor a and the effective degree of ionization of the polyion to be mutually dependent. In the good solvent regime g of QPVP4.3, QPVP20 and QPVP35 exhibited a decreasing value in the order 1 > g4.3 > g20 > g35. The low values of g for QPVP20 and QPVP35 are assumed to be responsible for the prior collapse of the higher quaternized samples. Collapse theory predicts dipole-dipole attraction to increase accordingly and even predicts a collapse in the good solvent regime. This could be exactly observed for the QPVP35 sample. The experimental results were compared to a newly developed theory of uniform spherical collapse induced by concomitant counterion binding developed by M. Muthukumar and A. Kundagrami. The theory agrees qualitatively with the location of the phase boundary as well as the trend of an increasing expansion with an increase of the degree of quaternization. However experimental determined g for the samples QPVP4.3, QPVP20 and QPVP35 decreases linearly with the degree of quaternization whereas this theory predicts an almost constant value.

Electrostatically self-assembled nanoparticles based on biomolecules

In this work, two different systems were investigated to develop fundamental understanding of the self-assembly behavior of polyelectrolytes and small organic counterions with a certain geometry. Complexes formed were characterized by light scattering in solution, as well as UV-Vis spectroscopy, analytical ultracentrifugation, gel electrophoresis, zeta potential and IR spectroscopy. The morphologies of the aggregates were observed by AFM in dried state on surface. The charge ratio, the valence and the structure of the counterion were shown to represent key parameters in the complexation. The influence of polyelectrolyte type and molecular weights was also determined for the structure formed.rnrnOne system was mainly focused on the association of double-strand DNA with non-intercalating divalent and tetravalent organic counterions. The other model system involved linear NaPSS and oligolysines. In addition, various influences on the morphology of the charged self-assembly complexes in AFM studies were discussed. It was shown that electrostatic self-assembly of DNA and non-intercalating counterions as well as of a linear synthetic polyelectrolyte with oligolysine counterions that can build mutual hydrogen bonds can yield supramolecular aggregates of a defined size. Various morphologies (flower-like, rod-like, toroidal and spherical) of the assemblies were obtained for different combinations of polyelectrolyte and counterions. Results presented in this work are of importance for the fundamental understanding of the association behavior of various polyelectrolytes and organic counterions. The selection of biopolymers for the study may give an opportunity to transfer the basic research results into biological applications, such as gene therapy or drug delivery.rn

Topologisch kontrollierte Interpolyelektrolytkomplexe aus kettensteifen Polyelektrolyten

Interpolyelektrolytkomplexe bilden sich spontan bei Mischung von Lösungen entgegengesetzt geladener Polyelektrolyte. Dabei sind die Haupttriebkräfte der Entropiegewinn durch die Freisetzung von niedermolekularen Gegenionen sowie die elektrostatischen Wechselwirkungen. In der letzten Zeit sind sie aufgrund ihrer zahlreichen biologischen und technischen Anwendungen in den Fokus des wissenschaftlichen Interesses gerückt. Vor allem die Anwendung von Komplexen aus DNA und kationischen Polyelektrolyten in der nonviralen Gentherapie wird vielfältig diskutiert. rnIn dieser Arbeit wird eine Polystyrolsulfonat-Bürste mit einer Pfropfdichte von 100 % mit einem kationischen Tensid komplexiert und der Komplex in verschiedenen organischen Lösungsmitteln charakterisiert. Dabei zeigt sich eine signifikante Abhängigkeit des Lösungsverhaltens von der Art und der Konzentration zugesetzter Salze. Dieser Polyelektrolyt-Tensid-Komplex wird anschließend als vereinfachtes Modellsystem für die Komplexierung von DNA verwendet. Als kationische Komponente dient zunächst ein kommerzielles PAMAM-Dendrimer der 5. Generation. Dabei steht die Erhaltung der zylindrischen Topologie der anionischen Polyelektrolytbürste in den gebildeten Komplexen im Vordergrund. Durch Variation des Lösungsmittels und des Protonierungsgleichgewichts werden die experimentellen Bedingungen eingegrenzt, bei denen eine solche topologische Kontrolle möglich ist. Es zeigt sich, dass durch die Verwendung von aprotischen organischen Lösungsmitteln gute Erfolge erzielt werden können. Des Weiteren wird das Komplexierungsverhalten stark durch den Zusatz einer Säure oder einer Base beeinflusst, sodass eine topologische Kontrolle mit einem großen Überschuss einer organischen Base auch in protischen Lösungsmitteln wie Wasser und Methanol möglich wird. Anschließend wird das gleiche Polyanion noch mit einer geschützten Polylysin-Bürste in DMF komplexiert, was zur Bildung von kinetisch kontrollierten Aggregaten führt. Die Bildung dieser Aggregate kann durch den Zusatz eines großen Überschusses an Base verhindert werden und es werden zylindrische Komplexe erhalten, die nur aus einer Polylysin-Bürste bestehen. rn

Hydrodynamics and solid dosage form disintegration/dissolution : immediate release tablets and novel in situ polyelectrolyte gastroretentive drug delivery systems

Solid oral dosage form disintegration in the human stomach is a highly complex process dependent on physicochemical properties of the stomach contents as well as on physical variables such as hydrodynamics and mechanical stress. Understanding the role of hydrodynamics and forces in disintegration of oral solid dosage forms can help to improve in vitro disintegration testing and the predictive power of the in vitro test. The aim of this work was to obtain a deep understanding of the influence of changing hydrodynamic conditions on solid oral dosage form performance. Therefore, the hydrodynamic conditions and forces present in the compendial PhEur/USP disintegration test device were characterized using a computational fluid dynamics (CFD) approach. Furthermore, a modified device was developed and the hydrodynamic conditions present were simulated using CFD. This modified device was applied in two case studies comprising immediate release (IR) tablets and gastroretentive drug delivery systems (GRDDS). Due to the description of movement provided in the PhEur, the movement velocity of the basket-rack assembly follows a sinusoidal profile. Therefore, hydrodynamic conditions are changing continually throughout the movement cycle. CFD simulations revealed that the dosage form is exposed to a wide range of fluid velocities and shear forces during the test. The hydrodynamic conditions in the compendial device are highly variable and cannot be controlled. A new, modified disintegration test device based on computerized numerical control (CNC) technique was developed. The modified device can be moved in all three dimensions and radial movement is also possible. Simple and complex moving profiles can be developed and the influence of the hydrodynamic conditions on oral solid dosage form performance can be evaluated. Furthermore, a modified basket was designed that allows two-sided fluid flow. CFD simulations of the hydrodynamics and forces in the modified device revealed significant differences in the fluid flow field and forces when compared to the compendial device. Due to the CNC technique moving velocity and direction are arbitrary and hydrodynamics become controllable. The modified disintegration test device was utilized to examine the influence of moving velocity on disintegration times of IR tablets. Insights into the influence of moving speed, medium viscosity and basket design on disintegration times were obtained. An exponential relationship between moving velocity of the modified basket and disintegration times was established in simulated gastric fluid. The same relationship was found between the disintegration times and the CFD predicted average shear stress on the tablet surface. Furthermore, a GRDDS was developed based on the approach of an in situ polyelectrolyte complex (PEC). Different complexes composed of different grades of chitosan and carrageenan and different ratios of those were investigated for their swelling behavior, mechanical stability, and in vitro drug release. With an optimized formulation the influence of changing hydrodynamic conditions on the swelling behavior and the drug release profile was demonstrated using the modified disintegration test device. Both, swelling behavior and drug release, were largely dependent on the hydrodynamic conditions. Concluding, it has been shown within this thesis that the application of the modified disintegration test device allows for detailed insights into the influence of hydrodynamic conditions on solid oral dosage form disintegration and dissolution. By the application of appropriate test conditions, the predictive power of in vitro disintegration testing can be improved using the modified disintegration test device. Furthermore, CFD has proven a powerful tool to examine the hydrodynamics and forces in the compendial as well as in the modified disintegration test device. rn

Trends in lipoplex physical properties dependent on cationic lipid structure, vehicle and complexation procedure do not correlate with biological activity

Using a group of structurally related cytofectins, the effects of different vehicle constituents and mixing techniques on the physical properties and biological activity of lipoplexes were systematically examined. Physical properties were examined using a combination of dye accessibility assays, centrifugation, gel electrophoresis and dynamic light scattering. Biological activity was examined using in vitro transfection. Lipoplexes were formulated using two injection vehicles commonly used for in vivo delivery (PBS pH 7.2 and 0.9% saline), and a sodium phosphate vehicle previously shown to enhance the biological activity of naked pDNA and lipoplex formulations. Phosphate was found to be unique in its effect on lipoplexes. Specifically, the accessible pDNA in lipoplexes formulated with cytofectins containing a γ-amine substitution in the headgroup was dependent on alkyl side chain length and sodium phosphate concentration, but the same effects were not observed when using cytofectins containing a β-OH headgroup substitution. The physicochemical features of the phosphate anion, which give rise to this effect in γ-amine cytofectins, were deduced using a series of phosphate analogs. The effects of the formulation vehicle on transfection were found to be cell type-dependent; however, of the formulation variables examined, the liposome/pDNA mixing method had the greatest effect on transgene expression in vitro. Thus, though predictive physical structure relationships involving the vehicle and cytofectin components of the lipoplex were uncovered, they did not extrapolate to trends in biological activity.