Occupational and non-occupational risk factors in bladder cancer patients in an industrialized area located in former East-Germany [Berufliche und außerberufliche Risikofaktoren für das Harnblasenkarzinom in einem ehemaligen Industriegebiet der neuen Bundesländer]

Purpose: Several occupational carcinogens are metabolized by polymorphic enzymes. The distribution of the polymorphic enzymes N-acetyltransferase 2 (NAT2; substrates: aromatic amines), glutathione S-transferase M1 (GSTM1; substrates: e.g., reactive metabolites of polycyclic aromatic hydrocarbons), and glutathione S-transferase T1 (GSTT1; substrates: small molecules with 1-2 carbon atoms) were investigated. Material and Methods: At the urological department in Lutherstadt Wittenberg, 136 patients with a histologically proven transitional cell cancer of the urinary bladder were investigated for all occupations performed for more than 6 months. Several occupational and non-occupational risk factors were asked. The genotypes of NAT2, GSTM1, and GSTT1 were determined from leucocyte DNA by PCR. Results: Compared to the general population in Middle Europe, the percentage of GSTT1 negative persons (22.1 %) was ordinary; the percentage of slow acetylators (59.6%) was in the upper normal range, while the percentage of GSTM1 negative persons (58.8%) was elevated in the entire group. Shifts in the distribution of the genotypes were observed in subgroups who had been exposed to asbestos (6/6 GSTM1 negative, 5/6 slow acetylators), rubber manufacturing (8/10 GSTM1 negative), and chlorinated solvents (9/15 GSTM1 negative). Conclusions: The overrepresentation of GSTM1 negative bladder cancer patients also in this industrialized area and more pronounced in several occupationally exposed subgroups points to an impact of the GSTM1 negative genotype in bladder carcinogenesis. [Article in German]

Interface of graphane with copper : a van der Waals density-functional study

Various forms of hydrogenated graphene have been produced to date by several groups, while the synthesis of pure graphane has not been achieved yet. The study of the interface between graphane, in all its possible hydrogenation configurations, and catalyst metal surfaces can be pivotal to assess the feasibility of direct CVD growth methods for this material. We investigated the adhesion of graphane to a Cu(111) surface by adopting the vdW-DF2-C09 exchange-correlation functional, which is able to describe dispersion forces. The results are further compared with the PBE and the LDA exchange-correlation functionals. We calculated the most stable geometrical configurations of the slab/graphane interface and evaluated how graphane's geometrical parameters are modified. We show that dispersion forces play an important role in the slab/graphane adhesion. Band structure calculations demonstrated that in the presence of the interaction with copper, the band gap of graphane is not only preserved, but also enlarged, and this increase can be attributed to the electronic charge accumulated at the interface. We calculated a substantial energy barrier at the interface, suggesting that CVD graphane films might act as reliable and stable insulating thin coatings, or also be used to form compound layers in conjunction with metals and semiconductors.

Development of fourth-grade students’ understanding of experimental and theoretical probability

Students explored variation and expectation in a probability activity at the end of the first year of a 3-year longitudinal study across grades 4-6. The activity involved experiments in tossing coins both manually and with simulation using the graphing software, TinkerPlots. Initial responses indicated that the students were aware of uncertainty, although an understanding of chance concepts appeared limited. Predicting outcomes of 10 tosses reflected an intuitive notion of equiprobability, with little awareness of variation. Understanding the relationship between experimental and theoretical probability did not emerge until multiple outcomes and representations were generated with the software.

Structuring representations of continuous data through investigations in grade 1

The study of data modelling with elementary students involves the analysis of a developmental process beginning with children’s investigations of meaningful contexts: visualising, structuring, and representing data and displaying data in simple graphs (English, 2012; Lehrer & Schauble, 2005; Makar, Bakker, & Ben-Zvi, 2011). A 3-year longitudinal study investigated young children’s data modelling, integrating mathematical and scientific investigations. One aspect of this study involved a researcher-led teaching experiment with 21 mathematically able Grade 1 students. The study aimed to describe explicit developmental features of students’ representations of continuous data...

Bhutanese eighth grade students' and teachers' perceptions of their classroom learning environment in relation to the new mathematics curriculum

This thesis examined how Bhutanese eighth grade students and teachers perceived their classroom learning environment in relation to a new standards-based mathematics curriculum. Data were gathered from administering surveys to a sample of 608 students and 98 teachers, followed by semi-structured interviews with selected participants. The findings of the study indicated that participants generally perceived their learning environments favorably. However, there were differences in terms of gender, school level, and school location. The study provides teachers, educational leaders, and policy-makers in Bhutan new insights into students' and teachers' perceptions of their mathematics classroom environments.

STEM learning through engineering design: fourth-grade students' investigations in aerospace

Background: Internationally, there is a growing concern for developing STEM education to prepare students for a scientifically and technologically advanced society. Despite educational bodies lobbying for an increased focus on STEM, there is limited research on how engineering might be incorporated especially in the elementary school curriculum. A framework of five comprehensive core engineering design processes (problem scoping, idea generation, design and construction, design evaluation, redesign), adapted from the literature on design thinking in young children, served as a basis for the study. We report on a qualitative study of fourth-grade students’ developments in working an aerospace problem, which took place during the first year of a 3-year longitudinal study. Students applied design processes together with their mathematics and science knowledge to the design and redesign of a 3-D model plane. Results: The study shows that through an aerospace engineering problem, students could complete initial designs and redesigns of a model plane at varying levels of sophistication. Three levels of increasing sophistication in students’ sketches were identified in their designs and redesigns. The second level was the most prevalent involving drawings or templates of planes together with an indication of how to fold the materials as well as measurements linked to the plane’s construction. The third level incorporated written instructions and calculations. Students’ engagement with each of the framework’s design processes revealed problem scoping components in their initial designs and redesigns. Furthermore, students’ recommendations for improving their launching techniques revealed an ability to apply their mathematics knowledge in conjunction with their science learning on the forces of flight. Students’ addition of context was evident together with an awareness of constraints and a consideration of what was feasible in their design creation. Interestingly, students’ application of disciplinary knowledge occurred more frequently in the last two phases of the engineering framework (i.e., design evaluation and redesign), highlighting the need for students to reach these final phases to enable the science and mathematics ideas to emerge. Conclusions: The study supports research indicating young learners’ potential for early engineering. Students can engage in design and redesign processes, applying their STEM disciplinary knowledge in doing so. An appropriate balance is needed between teacher input of new concepts and students’ application of this learning in ways they choose. For example, scaffolding by the teacher about how to improve designs for increased detail could be included in subsequent experiences. Such input could enhance students’ application of STEM disciplinary knowledge in the redesign process. We offer our framework of design processes for younger learners as one way to approach early engineering education with respect to both the creation of rich problem experiences and the analysis of their learning.

Author's reply to: Ankylosing spondylitis: evidence for a non-HLA-B*27 protective effect, Sjef Van Der Linden, Desieree Van Der Heijde

As mentioned in the letter by van der Linden and van der Heijde, Jurgen Braun’s excellent recent paper describing a survey of blood donors by questionnaire, clinical, and magnetic resonance imaging examinations revealed a prevalence of ankylosing spondylitis in B27 positive blood donors (6.4%)1-1 very similar to that reported by Gran et al(6.7%).1-2 It is probable that some of the differences in reported prevalence of ankylosing spondylitis by the various studies are because of methodological differences.

Confronting expectation in grade 4: Tossing two coins

This study focuses on the experiences of 91 Grade 4 students who had been introduced to expectation and variation through trials of tossing a single coin many times. They were then given two coins to toss simultaneously and asked to state their expectation of the chances for the possible outcomes, in a similar manner expressed for a single coin. This paper documents the journey of the students in discovering that generally their initial expectation for two coins was incorrect and that despite variation, a large number of tosses could confirm a new expectation.

Effect of ion nitriding on the microstructure and properties of Maraging steel (250 Grade)

In the present investigation, ion nitriding of Maraging steel (250 grade) has been carried out at three different temperatures i.e., at 435 degrees C, 450 degrees C and 465 degrees C for 10 h duration in order to achieve good wear resistance along with high strength required for the slat track component of aircraft. The microstructure of the base material and the nitrided layer was examined by optical and scanning electron microscope, and various phases present were determined by X-ray diffraction. Various properties, such as, hardness, case depth, tensile, impact, fatigue properties and corrosion resistance were investigated for both un-nitrided and ion-nitrided materials. It is observed that the microstructure of the core material remains unaltered and Fe4N is formed in the hardened surface layer after ion nitriding at all the three temperatures employed. Surface hardness increases substantially after ion nitriding. Surface hardness remains almost the same but case depth increases with the increase in ion nitriding temperature due to greater diffusivity at higher temperatures. Tensile strength, fatigue strength and corrosion resistance are improved but ductility and energy absorbed in impact test decrease on ion nitriding. These results are explained on the basis of microstructural observations. The properties obtained after ion nitriding at 450 degrees C for 10 h are found to be optimum when compared to the other two ion nitriding temperatures.

MHD Flow of a 2nd Grade Fluid in an Orthogonal Rheometer

The magnetohydrodynamics (MHD) flow of a conducting, homogeneous incompressible Rivlin-Ericksen fluid of second grade contained between two infinite, parallel, insulated disks rotating with the same angular velocity about two noncoincident axes, under the application of a uniform transverse magnetic field, is investigated. This model represents the MHD flow of the fluid in the instrument called an orthogonal rheometer, except for the fact that in the rheometer the rotating plates are necessarily finite. An exact solution of the governing equations of motion is presented. The force components in the x and y directions on the disks are calculated. The effects of magnetic field and the viscoelastic parameter on the forces are discussed in detail.

Die Personennamen und Titel der mittelmongolischen Dokumente : Eine lexikalische Untersuchung

The present research is an investigation into the corpus of personal names and titles that are found in sources from the Middle Mongolian period, that is the time from the 13th to the beginning of the 15th century. The entry for every name or title has been divided into three parts: occurence(s) of a given name in Middle Mongolian sources (primary sources), etymology, and occurence(s) in sources other than Middle Mongolian (secondary sources). Culturally and lingistically the corpus can be divided into six sub-groups: Mongolian, Turkic (Old, Middle and Modern), Arabo-Persian (Islamic), Indo-Iranian and Tibetan (Buddhist), as well as Chinese. Among these, the largest group is formed by Mongolian and Turkic, followed by Chinese (mostly titles), Indo-Iranian, Arabo-Persian and Tibetan. With regard to the primary and secondary occurences the research is based mainly on primary sources including text-publications and dictionaries. Every name or title is documented as completely as possible within a Central Asian framework. However, due to the divergency of the sources available as well as diachronical importance, each sub-group has been dealt with slightly differently, but consistently. The corpus of investigated names and titles gives a fairly correct picture of the multi-ethnical composition of the Mongolian world-empire. It also shows the foreign influences on Mongolian names and titles, being in this respect a mirror of the influences that are visible in other parts of the Middle Mongolian culture too. Furthermore, the investigated corpus reflects the transitory stage of the 13th to 15th century in Central Asian history, and includes thus material from the past (Indo-Iranian, Old and Middle Turkic), and material that points to the future (Arabo-Persian, Tibetan, Modern Turkic).

Die Eigenschaften der Benennungen und ihr Einfluss auf deren Verwendung am Beispiel der Euro-Währung : Eine quantitative und kontrastive Analyse der Terminologie im Finnischen und im Deutschen

This dissertation deals with the terminology of the Euro currency. Its aims are to determine the characteristics of the designations in a certain LSP and to discover whether the recommendations and rules that have been given to the formation of designations and 'ideal' designations have any influence on the usage of the designations. The characteristics analysed include length of the designation, part of speech, form, formation method, constancy, monosemy, suitability to a concept system and degree of specialty. The study analyses the actual usage of the designations in texts and the implementation of the designations. The study is an adaptation of a terminometric survey and uses concept analysis and quantitative analysis as its basic methods. The frequency of each characteristic is measured in terms of statistics. It is assumed that the 'ideality' of a designation influences its usage, for example that if a designation is short, it is used more than its longer rivals (synonyms). The results are analysed in a corpus consisting of a compilation of different texts concerning the Euro. The corpus is divided according to three features: year (1998-2003), genre (judicial texts, annual reports and brochures) and language (Finnish and German). Each analysis is performed according to each of these features and compared with the others. The results indicate that some of the characteristics of the designations indeed seem to have an influence on the usage of the designations. For example, monosemy and suitability to the concept system often lead to the implementation of the designation having the ideal or certain value in these characteristics in the analysed Finnish material. In German material, an 'ideal' value in the characteristics leads to the implementation of the designations more often than in Finnish. The contrastive study indicates that, for example, suitability to a concept system leads to implementation of a designation in judicial texts more often than in other genres. The recommendations given to an 'ideal' designation are thus often acceptable, but they cannot be generalized for all languages in the same extent.

Untersuchungen zur Fachsprache der Ökologie und des Umweltschutzes im Deutschen und Finnischen : Bezeichnungsvarianten unter einem geschichtlichen, lexikographischen, morphologischen und linguistisch-pragmatischen Aspekt

The work integrates research in the language and terminology of various fields with lexicography, etymology, semantics, word formation, and pragmatics. Additionally, examination of German and Finnish provides the work with perspective of contrastive linguistics and the translation of texts in specialized fields. The work is an attempt to chart the language, vocabulary, different textual types, and essential communication-connected features of this special field. The study is primary concerned with internal communication within the field of ecology, but it also provides a comparison of the public discussion of environmental issues in Germany and Finland. The work attempts to use textual signs to provide a picture of the literary communication used on the different vertical levels in the central text types within the field. The dictionaries in the fields of environmental issues and ecology for the individual text types are examined primarily from the perspective of their quantity and diversity. One central point of the work is to clarify and collect all of the dictionaries in the field that have been compiled thus far in which German and/or Finnish ware included. Ecology and environmental protection are closely linked not only to each other but also to many other scientific fields. Consequently, the language of the environmental field has acquired an abundance of influences and vocabulary from the language of the special fields close to it as well as from that of politics and various areas of public administration. The work also demonstrates how the popularization of environmental terminology often leads to semantic distortion. Traditionally, scientific texts have used the smallest number of expressions, the purpose of which is to appeal to or influence the behavior of the text recipient. Particularly in Germany, those who support or oppose measures to protect the environment have long been making concerted efforts to represent their own views in the language that they use. When discussing controversial issues competing designations for the same referent or concept are used in accordance with the interest group to which the speaker belongs. One of the objectives of the study is to sensitize recipients of texts to notice the euphemistic expressions that occur in German and Finnish texts dealing with issues that are sensitive from the standpoint of environmental policy. One particular feature of the field is the wealth and large number of variants designating the same entry or concept. The terminological doublets formed by words of foreign origin and their German or Finnish language equivalents are quite typical of the field. Methods of corpus linguistics are used to determine the reasons for the large number of variant designations as well as their functionality.

Zur Sättigung der Valenz in den Kleinen Meldungen des Typus Notiz : Eine pragmatisch fundierte Analyse

Valency Realization in Short Excerpts of News Text. A Pragmatics-funded analysis This dissertation is a study of the so-called pragmatic valency. The aim of the study is to examine the phenomenon both theoretically by discussing the research literature and empirically based on evidence from a text corpus consisting of 218 short excerpts of news text from the German newspaper Frankfurter Allgemeine Zeitung. In the theoretical part of the study, the central concepts of the valency and the pragmatic valency are discussed. In the research literature, the valency denotes the relation among the verb and its obligatory and optional complements. The pragmatic valency can be defined as modification of the so-called system valency in the parole, including non-realization of an obligatory complement, non- realization of an optional complement and realization of an optional complement. Furthermore, the investigation of the pragmatic valency includes the role of the adjuncts, elements that are not defined by the valency, in the concrete valency realization. The corpus study investigates the valency behaviour of German verbs in a corpus of about 1500 sentences combining the methodology and concepts of valency theory, semantics and text linguistics. The analysis is focused on the about 600 sentences which show deviations from the system valency, providing over 800 examples for the modification of the system valency as codified in the (valency) dictionaries. The study attempts to answer the following primary question: Why is the system valency modified in the parole? To answer the question, the concept of modification types is entered. The modification types are recognized using distinctive feature bundles in which each feature with a negative or a positive value refers to one reason for the modification treated in the research literature. For example, the features of irrelevance and relevance, focus, world and text type knowledge, text theme, theme-rheme structure and cohesive chains are applied. The valency approach appears in a new light when explored through corpus-based investigation; both the optionality of complements and the distinction between complements and adjuncts as defined in the present valency approach seem in some respects defective. Furthermore, the analysis indicates that the adjuncts outside the valency domain play a central role in the concrete realization of the valency. Finally, the study suggests a definition of pragmatic valency, based on the modification types introduced in the study and tested in the corpus analysis.