Spirulina platensis: process optimization to obtain biomass

Spirulina platensis is a photoautotrophic mesophilic cyanobacterium. Its main sources of nutrients are nitrate, urea, and ammonium salts. Spirulina cultivation requires temperature, light intensity, and nutrient content control. This microalgae has been studied and used commercially due to its therapeutic and antioxidant potential. In addition, several studies have reported its ability to use CO2, its immune activity, and use as an adjuvant nutritive factor in the treatment of obesity. The objective of this study is the production of biomass of S. platensis using different rates of stirring, nitrogen source, amount of micronutrients, and luminosity. A 2(4) experimental design with the following factors: stirring (120 and 140 RPM), amount of nitrogen (1.5 and 2.5 g/L), amount of micronutrients (0,25 and 0,75 mL/L) (11 and 15 W), and luminosity was used. Fermentation was performed in a 500 mL conical flask with 250 mL of culture medium and 10% inoculum in an incubator with controlled stirring and luminosity. Fermentation was monitored using a spectrophotometer (560 nm), and each fermentation lasted 15 days. Of the parameters studied, luminosity is the one with the highest significance, followed by the amount of nitrogen and the interaction between stirring and micronutrients. Maximum production of biomass for 15 days was 2.70 g/L under the following conditions: luminosity15W; stirring, 120 RPM; source of nitrogen, 1.5 g/L; and micronutrients, 0.75 mL/L.

Salted lamb meat blanket of Petrolina-Pernambuco, Brazil: process and quality

Salted lamb meat blanket, originated from boning, salting, and drying of whole lamb carcass, was studied aiming at obtaining information that support the search for guarantees of origin for this typical regional product from the city of Petrolina-Pernambuco-Brazil. Data from three processing units were obtained, where it was observed the use of a traditional local technology that uses salting, an ancient preservation method; however, with a peculiar boning technique, resulting in a meat product with great potential for exploitation in the form of meat blanket. Based on the values of pH (6.22 ± 0.22), water activity (0.97 ± 0.02), and moisture (69.86 ± 2.26) lamb meat blanket is considered a perishable product, and consequently it requires the use of other preservation methods combined with salt, which along with the results of the microbiological analyses (absence of Salmonella sp, score <10 MPN/g of halophilic bacteria, total coliforms between 6.7 × 10³ and 5.2 × 10(6) FUC/g, and Staphylococcus from 8.1 × 10³ CFU/g at uncountable) reinforce the need of hygienic practices to ensure product safety. These results, together with the product notoriety and the organization of the sector are important factors in achieving Geographical Indication of the Salted lamb Meat blanket of Petrolina.

Tracing Innovation Practices in Seaports: the Ports of Klaipeda and Stockholm as Case Studies

This study explores variegated means through which ports have become increasingly entangled in the planning logic of neoliberal innovation-driven economy. The research topic belongs to the academic disciplines of economics and human geography. The aim of the thesis is to analyse how the notion of innovation, adopted in a variety of supranational and national port policy documents, is deployed in operational port environment in two different ports of the Baltic Sea Region: the port of Stockholm, Sweden, and the port of Klaipeda, Lithuania. This novel innovation agenda is visible in several topics I examine in the study, that is, port governance, environmental issues, and seaport – port-city interface. The gathered primary source material on port policy documents, strategies, development planning documents and reports is analysed by utilizing the qualitative content analysis research method. Moreover, the empirical part of the case study, that is, tracing innovation practices in mundane port activities is based on collected qualitative semi-structured interviews with port authorities in Klaipeda and Stockholm, researchers and other port experts. I examine the interview material by employing the theoretical reading research method. In my analysis, I have reframed port-related policy development by tracing and identifying the port transformation from “functional terminals” to “engines for growth”. My results show that this novel innovation-oriented rhetoric imprinted in the narrative “engines for growth” is often contested in daily port practices. In other words, my analysis reveals that the port authorities’ and other port actors’ attitudes towards innovations do not necessarily correspond to the new narrative of innovation and do not always “fit” within a framework of neoliberal economic thinking that glorifies the “culture of innovations”. I argue that the ability to develop innovative initiatives in the ports of Klaipeda and Stockholm is strongly predetermined by local conditions, a port’s governance model, the way port actors perceive the importance of innovations per se, demand factors and new regulations.

Vinegar rice (Oryza sativa L.) produced by a submerged fermentation process from alcoholic fermented rice

Considering the limited availability of technology for the production of rice vinegar and also due to the potential consumer product market, this study aimed to use alcoholic fermented rice (rice wine (Oryza sativa L.)) for vinegar production. An alcoholic solution with 6.28% (w/v) ethanol was oxidized by a submerged fermentation process to produce vinegar. The process of acetic acid fermentation occurred at 30 ± 0.3°C in a FRINGS® Acetator (Germany) for the production of vinegar and was followed through 10 cycles. The vinegar had a total acidity of 6.85% (w/v), 0.17% alcohol (w/v), 1.26% (w/v) minerals and 1.78% (w/v) dry extract. The composition of organic acids present in rice vinegar was: cis-aconitic acid (6 mg/L), maleic acid (3 mg/L), trans-aconitic acid (3 mg/L), shikimic + succinic acid (4 mg/L), lactic acid (300 mg/L), formic acid (180 mg/L), oxalic acid (3 mg/L), fumaric acid (3 mg/L) and itaconic acid (1 mg/L).

Optimization of the extraction process of polyphenols from cashew apple agro-industrial residues

The goal of this study was to determine the chemical composition of cashew apples agro-industrial residue and optimize the process of polyphenols extraction in this residue. The extraction process conditions were defined using a 24-1 fractional factorial experimental design using acetone and methanol as solvents. The independent variables were: time (30 to 90 min), temperature (30 to 50 °C), solvent concentrations (50% to 90%), agitation speed (100 to 300 rpm); the dependent variables were: total phenolic content and DPPH scavenging capacity. The optimized process was carried out by applying the Central Composite Rotational Design (CCRD) considering the results obtained with the 24-1 fractional factorial experimental design. The residue presented bioactive compounds in its composition, with emphasis on the content of total phenolic compounds (1975.64 mg/ 100 g). The extraction process was not affected by methanol; however, acetone affected the amounts of extracted phytochemicals. Extracts with high levels of polyphenols and strong DPPH scavenging capacity (> 80%) were obtained using 55% acetone, 30 minutes, 30 °C, and 150 rpm. The results showed that cashew apple residue is a potential natural source of bioactive compounds with strong antioxidant capacity. These compounds could be used partially or totally to replace synthetic antioxidants.

Influence of the moisture at harvest and drying process of the grains on the level of carotenoids in maize (Zea mays)

AbstractMaize is considered a source of carotenoids; however, these compounds are highly unstable, degraded by high temperatures, exposure to light and presence of oxygen. The objective of this work was to evaluate the influence of the moisture and type of drying applied to grains on the level of carotenoids in yellow maize. The experiment was conducted in a completely randomized design (2 × 4 factorial), two levels of initial moisture at the harvest (22 and 19%) and three types of drying (in the sun; in the shade and in a dryer) and control (no drying). The samples of grains after drying with 12% of final moisture were analyzed by concentration of total carotenoids, carotenes (α-carotene + β-carotene), monohydroxilated carotenoids (β-cryptoxanthin), and xanthophylls (lutein + zeaxanthin). Initial moisture, type of drying and the interaction between moisture versus drying influence (p≤0.05) the levels of carotenoids in grains. This is the first report about the drying conditions and harvest’s initial moisture as influence on the profile and content of carotenoids in maize grains. Based on the results, this work suggested that the harvest be carried out preferably when the grains present 22% humidity, with drying in a dryer or in shade for further use or storage.

Effects of gutting process on the shelf life of cultured meagre (Argyrosomus regius ASSO, 1801) stored at 4 ± 1 °C

Abstract The aim of this study was to determine chemical, nutritional and microbiological evaluation of whole or gutted meagre stored at 4 ± 1 oC. Whole ungutted (Group A), eviscerated (Group B), beheaded-eviscerated fish (Group C) and fillets (Group D) groups were created for this study. According to fatty acid analysis, it was determined that meagre is rich in PUFA content and the n3/n6 ratio is within the ideal limits. In all 4 groups, obtained from fillets values were the highest in general, quality parameters were found within acceptable limits. Psychrophilic and mesophilic aerobic bacteria counts exceeded the standards for fillet groups on 7th days of storage. According to microbiological analysis, ungutted, beheaded, eviscerated samples were not exceeded limit values on 9th day. In conclusion, whole or gutted (headed and eviscerated) storage of meagre is found to be more advantageous compared to fillets for storage at 4 ± 1 oC.

Utilizing analytic modelling process in industrial retail context

Nykypäivän monimutkaisessa ja epävakaassa liiketoimintaympäristössä yritykset, jotka kykenevät muuttamaan tuottamansa operatiivisen datan tietovarastoiksi, voivat saavuttaa merkittävää kilpailuetua. Ennustavan analytiikan hyödyntäminen tulevien trendien ennakointiin mahdollistaa yritysten tunnistavan avaintekijöitä, joiden avulla he pystyvät erottumaan kilpailijoistaan. Ennustavan analytiikan hyödyntäminen osana päätöksentekoprosessia mahdollistaa ketterämmän, reaaliaikaisen päätöksenteon. Tämän diplomityön tarkoituksena on koota teoreettinen viitekehys analytiikan mallintamisesta liike-elämän loppukäyttäjän näkökulmasta ja hyödyntää tätä mallinnusprosessia diplomityön tapaustutkimuksen yritykseen. Teoreettista mallia hyödynnettiin asiakkuuksien mallintamisessa sekä tunnistamalla ennakoivia tekijöitä myynnin ennustamiseen. Työ suoritettiin suomalaiseen teollisten suodattimien tukkukauppaan, jolla on liiketoimintaa Suomessa, Venäjällä ja Balteissa. Tämä tutkimus on määrällinen tapaustutkimus, jossa tärkeimpänä tiedonkeruumenetelmänä käytettiin tapausyrityksen transaktiodataa. Data työhön saatiin yrityksen toiminnanohjausjärjestelmästä.

Separation of lignin in Pulp Mill process and its effect on sodium sulphur balance

The aim of this thesis is to define effects of lignin separation process on Pulp mill chemical balance especially on sodium/sulphur-balance. The objective is to develop a simulation model with WinGEMS Process Simulator and use that model to simulate the chemical balances and process changes. The literature part explains what lignin is and how kraft pulp is produced. It also introduces to the methods that can be used to extract lignin from black liquor stream and how those methods affect the pulping process. In experimental part seven different cases are simulated with the created simulation model. The simulations are based on selected reference mill that produces 500 000 tons of bleached air-dried (90 %) pulp per year. The simulations include the chemical balance calculation and the estimated production increase. Based on the simulations the heat load of the recovery boiler can be reduced and the pulp production increased when lignin is extracted. The simulations showed that decreasing the waste acid stream intake from the chlorine dioxide plant is an effective method to control the sulphidity level when about 10 % of lignin is extracted. With higher lignin removal rates the in-mill sulphuric acid production has been discovered to be a better alternative to the sulphidity control.

Reengineering and modelling of a product certification process

Työn teoriaosuudessa tutkittiin prosessien uudelleen suunnittelua, prosessien mallintamista sekä prosessimittariston rakentamista. Työn tavoitteena oli uudelleen suunnitella organisaation sertifiointiprosessi. Tämän tavoitteen saavuttamiseksi piti mallintaa nykyinen ja uusi prosessi sekä rakentaa mittaristo, joka antaisi organisaatiolle arvokasta tietoa siitä, kuinka tehokkaasti uusi prosessi toimii. Työ suoritettiin osallistuvana toimintatutkimuksena. Diplomityön tekijä oli toiminut kohdeorganisaatiossa työntekijänä jo useita vuosia ja pystyi näinollen hyödyntämään omaa tietämystään sekä nykyisen prosessin mallintamisessa, että uuden prosessin suunnittelussa. Työn tuloksena syntyi uusi sertifiointiprosessi, joka on karsitumpi ja tehokkaampi kuin edeltäjänsä. Uusi mittaristojärjestelmä rakennettiin, jota organisaation johto kykenisi seuraamaan prosessin sidosryhmien tehokkuutta sekä tuotteiden laadun kehitystä. Sivutuotteena organisaatio sai käyttöönsä yksityiskohtaiset prosessikuvaukset, joita voidaan hyödyntää koulutusmateriaalina uutta henkilöstöä rekrytoitaessa sekä informatiivisena työkaluna esiteltäessä prosessia virallisille sertifiointitahoille.

Analysis of the Change Management Process in a Multinational Company

The purpose of this thesis was to study change management and find out how the theory applies to practise with the help of studying an organizational change process. The goal was to investigate the different ways of the change management and how those could be utilized in practise. The purpose was also to see what kind of tools and information packages for change management the company involved has developed and taken in to use and check if these could have been utilized in the change process studied in this thesis. This thesis was established by studying the theory of change management and interviewing the people involved in the organizational change and the stakeholders. The questions were formed in line with the change management theory. The main theory used was John P. Kotter’s Eight Steps of Change. The study revealed valuable details about change processes in real life and concrete improvement ideas were recognized from the interviews. Overall the people were quite happy with the outcome of the change process. There were also some failures identified in this change process. Most probably those can be avoided in the future if people planning the change are familiar with the company’s new information packages and tools for change management. Change management is a complex area that is still today quite often forgotten by companies. Effective change management can give a huge competitive advantage for a company. Acknowledging that change process is always complex and not easy is already a good step forward in handling change processes. All changes need change management and understanding the way people react on change. A good and efficient change management is the key to make the change process smooth and easier for the people involved.