The use of cost per life year gained as a measurement of cost-effectiveness in Spain: a systematic review of recent publications

The objective of this study was to evaluate the methodological characteristics of cost-effectiveness evaluations carried out in Spain, since 1990, which include LYG as an outcome to measure the incremental cost-effectiveness ratio. METHODS: A systematic review of published studies was conducted describing their characteristics and methodological quality. We analyse the cost per LYG results in relation with a commonly accepted Spanish cost-effectiveness threshold and the possible relation with the cost per quality adjusted life year (QALY) gained when they both were calculated for the same economic evaluation. RESULTS: A total of 62 economic evaluations fulfilled the selection criteria, 24 of them including the cost per QALY gained result as well. The methodological quality of the studies was good (55%) or very good (26%). A total of 124 cost per LYG results were obtained with a mean ratio of 49,529 and a median of 11,490 (standard deviation of 183,080). Since 2003, a commonly accepted Spanish threshold has been referenced by 66% of studies. A significant correlation was found between the cost per LYG and cost per QALY gained results (0.89 Spearman-Rho, 0.91 Pearson). CONCLUSIONS: There is an increasing interest for economic health care evaluations in Spain, and the quality of the studies is also improving. Although a commonly accepted threshold exists, further information is needed for decision-making as well as to identify the relationship between the costs per LYG and per QALY gained.

Cranial computed tomography findings in patients admitted to the emergency unit of Hospital Universitário Cajuru

Objective To identify and analyze the prevalence of cranial computed tomography findings in patients admitted to the emergency unit of Hospital Universitário Cajuru. Materials and Methods Cross-sectional study analyzing 200 consecutive non contrast-enhanced cranial computed tomography reports of patients admitted to the emergency unit of Hospital Universitário Cajuru. Results Alterations were observed in 76.5% of the patients. Among them, the following findings were most frequently observed: extracranial soft tissue swelling (22%), bone fracture (16.5%), subarachnoid hemorrhage (15%), nonspecific hypodensity (14.5%), paranasal sinuses opacification (11.5%), diffuse cerebral edema (10.5%), subdural hematoma (9.5%), cerebral contusion (8.5%), hydrocephalus (8%), retractable hypodensity /gliosis/ encephalomalacia (8%). Conclusion The authors recognize that the most common findings in emergency departments reported in the literature are similar to the ones described in the present study. This information is important for professionals to recognize the main changes to be identified at cranial computed tomography, and for future planning and hospital screening aiming at achieving efficiency and improvement in services.

The role of ultrasonography in the measurement of subcutaneous and visceral fat and its correlation with hepatic steatosis

Objective To evaluate the sonographic measurement of subcutaneous and visceral fat in correlation with the grade of hepatic steatosis. Materials and Methods In the period from October 2012 to January 2013, 365 patients were evaluated. The subcutaneous and visceral fat thicknesses were measured with a convex, 3–4 MHz transducer transversely placed 1 cm above the umbilical scar. The distance between the internal aspect of the abdominal rectus muscle and the posterior aortic wall in the abdominal midline was considered for measurement of the visceral fat. Increased liver echogenicity, blurring of vascular margins and increased acoustic attenuation were the parameters considered in the quantification of hepatic steatosis. Results Steatosis was found in 38% of the study sample. In the detection of moderate to severe steatosis, the area under the ROC curve was 0.96 for women and 0.99 for men, indicating cut-off values for visceral fat thickness of 9 cm and 10 cm, respectively. Conclusion The present study evidenced the correlation between steatosis and visceral fat thickness and suggested values for visceral fat thickness to allow the differentiation of normality from risk for steatohepatitis.

Le pool ou unité commune de personnel soignant

L'unité commune de personnel soignant ou pool infirmier du CHUV est un service de professionnels qualifiés, disponibles et capables de remplacer les défections du personnel régulier ou renforcer les effectifs lors de surcharge de travail occasionnel. [Table des matières] 1. Le pool: perspective historique: Origine du travail intérimaire; Le travail intérimaire en Suisse et son développement; Genèse du Pool; Développement du Pool. 2. Problématique du Pool : Perspective conceptuelle et théorique. L'hôpital, modèle d'organisation pris entre deux logiques; Marché-hiérarchie: théorie des coûts de transactions; La coordination collective des actions individuelles apport de l'économie des conventions. Concept de flexibilité. Connaissance tacite et explicite. 3. Le terrain d'observation. Annexes: Questionnaire des poolistes et résumé des commentaires; etc.

Trends in adult body-mass index in 200 countries from 1975 to 2014: a pooled analysis of 1698 population-based measurement studies with 19·2 million participants.

BACKGROUND: Underweight and severe and morbid obesity are associated with highly elevated risks of adverse health outcomes. We estimated trends in mean body-mass index (BMI), which characterises its population distribution, and in the prevalences of a complete set of BMI categories for adults in all countries. METHODS: We analysed, with use of a consistent protocol, population-based studies that had measured height and weight in adults aged 18 years and older. We applied a Bayesian hierarchical model to these data to estimate trends from 1975 to 2014 in mean BMI and in the prevalences of BMI categories (<18·5 kg/m(2) [underweight], 18·5 kg/m(2) to <20 kg/m(2), 20 kg/m(2) to <25 kg/m(2), 25 kg/m(2) to <30 kg/m(2), 30 kg/m(2) to <35 kg/m(2), 35 kg/m(2) to <40 kg/m(2), ≥40 kg/m(2) [morbid obesity]), by sex in 200 countries and territories, organised in 21 regions. We calculated the posterior probability of meeting the target of halting by 2025 the rise in obesity at its 2010 levels, if post-2000 trends continue. FINDINGS: We used 1698 population-based data sources, with more than 19·2 million adult participants (9·9 million men and 9·3 million women) in 186 of 200 countries for which estimates were made. Global age-standardised mean BMI increased from 21·7 kg/m(2) (95% credible interval 21·3-22·1) in 1975 to 24·2 kg/m(2) (24·0-24·4) in 2014 in men, and from 22·1 kg/m(2) (21·7-22·5) in 1975 to 24·4 kg/m(2) (24·2-24·6) in 2014 in women. Regional mean BMIs in 2014 for men ranged from 21·4 kg/m(2) in central Africa and south Asia to 29·2 kg/m(2) (28·6-29·8) in Polynesia and Micronesia; for women the range was from 21·8 kg/m(2) (21·4-22·3) in south Asia to 32·2 kg/m(2) (31·5-32·8) in Polynesia and Micronesia. Over these four decades, age-standardised global prevalence of underweight decreased from 13·8% (10·5-17·4) to 8·8% (7·4-10·3) in men and from 14·6% (11·6-17·9) to 9·7% (8·3-11·1) in women. South Asia had the highest prevalence of underweight in 2014, 23·4% (17·8-29·2) in men and 24·0% (18·9-29·3) in women. Age-standardised prevalence of obesity increased from 3·2% (2·4-4·1) in 1975 to 10·8% (9·7-12·0) in 2014 in men, and from 6·4% (5·1-7·8) to 14·9% (13·6-16·1) in women. 2·3% (2·0-2·7) of the world's men and 5·0% (4·4-5·6) of women were severely obese (ie, have BMI ≥35 kg/m(2)). Globally, prevalence of morbid obesity was 0·64% (0·46-0·86) in men and 1·6% (1·3-1·9) in women. INTERPRETATION: If post-2000 trends continue, the probability of meeting the global obesity target is virtually zero. Rather, if these trends continue, by 2025, global obesity prevalence will reach 18% in men and surpass 21% in women; severe obesity will surpass 6% in men and 9% in women. Nonetheless, underweight remains prevalent in the world's poorest regions, especially in south Asia. FUNDING: Wellcome Trust, Grand Challenges Canada.

A nonparametric method for the measurement of size diversity with emphasis on data standardization

The most suitable method for estimation of size diversity is investigated. Size diversity is computed on the basis of the Shannon diversity expression adapted for continuous variables, such as size. It takes the form of an integral involving the probability density function (pdf) of the size of the individuals. Different approaches for the estimation of pdf are compared: parametric methods, assuming that data come from a determinate family of pdfs, and nonparametric methods, where pdf is estimated using some kind of local evaluation. Exponential, generalized Pareto, normal, and log-normal distributions have been used to generate simulated samples using estimated parameters from real samples. Nonparametric methods include discrete computation of data histograms based on size intervals and continuous kernel estimation of pdf. Kernel approach gives accurate estimation of size diversity, whilst parametric methods are only useful when the reference distribution have similar shape to the real one. Special attention is given for data standardization. The division of data by the sample geometric mean is proposedas the most suitable standardization method, which shows additional advantages: the same size diversity value is obtained when using original size or log-transformed data, and size measurements with different dimensionality (longitudes, areas, volumes or biomasses) may be immediately compared with the simple addition of ln k where kis the dimensionality (1, 2, or 3, respectively). Thus, the kernel estimation, after data standardization by division of sample geometric mean, arises as the most reliable and generalizable method of size diversity evaluation

Palvelukonsernin Iiiketoimintayksikön suorituskyvyn mittaaminen

Kiristyvät markkinat ajavat yritykset tehostamaan toimintaansa. Suorituskyvyn mittaaminen on jo olennainen osa suomalaista yrityskulttuuria. Mittaamisen päätehtävä on tuottaa yritysjohdolle relevanttia informaatiota yrityksen tilasta ja auttaa valvomaan ja kehittämään toimintaa. Tämän tutkimuksen kohteena on palvelukonsernin Iiiketoimintayksikön suorituskyvyn mittaaminen. Tutkimuksen päätavoitteina on 1. valita palvelukonsernin liiketoimintayksikölle sopiva suorituskyvyn mittausjärjestelmä, 2. valita käytännöllinen implementointimalli sekä 3. laatia suorituskykymittaristo palvelukonsernin liiketoimintayksikölle. Tämä tutkimus jakautuu kahteen vaiheeseen. Ensimmäisessä vaiheessa tutkimuksen kohteena on suorituskyvyn teoria ja neljä erilaista mittausmenetelmää, joista valitaan yksi Iiiketoimintayksikön suorituskyvyn mittausjärjestelmäksi sekä syvempää tarkastelua varten. Tutkimuksen toisessa vaiheessa tutkitaan valitun mittausjärjestelmän ominaisuuksia strategisena johtamisjärjestelmänä sekä sen implementointimalleja. Toisen vaiheen keskeisin tutkimusosuus on suorituskykymittausjärjestelmän laadinta. Työn lopputuloksena syntyy palvelukonsernin Iiiketoimintayksikön suorituskyvyn mittausjärjestelmä sekä jatkotoimenpide-ehdotus Balanced Scorecardin laajentamiseksi Iiiketoimialan ohjausjärjestelmäksi.

Development of tender information process by business intelligence in a global company unit

The purpose of this Thesis was to study what is the present situation of Business Intelligence of the company unit. This means how efficiently unit uses possibilities of modern information management systems. The aim was to resolve how operative informa-tion management of unit’s tender process could be improved by modern information technology applications. This makes it possible that tender processes could be faster and more efficiency. At the beginning it was essential to acquaint oneself with written literature of Business Intelligence. Based on Business Intelligence theory is was relatively easy but challenging to search and discern how tender business could be improved by methods of Busi-ness Intelligence. The empirical phase of this study was executed as qualitative research method. This phase includes theme and natural interviews on the company. Problems and challenges of tender process were clarified in a part an empirical phase. Group of challenges were founded when studying information management of company unit. Based on theory and interviews, group of improvements were listed which company could possible do in the future when developing its operative processes.

Capillary thermal desorption unit for near real-time analysis of VOCs at sub-trace levels. Application to the analysis of environmental air contamination and breath samples

A capillary microtrap thermal desorption module is developed for near real-time analysis of volatile organic compounds (VOCs) at sub-ppbv levels in air samples. The device allows the direct injection of the thermally desorbed VOCs into a chromatographic column. It does not use a second cryotrap to focalize the adsorbed compounds before entering the separation column so reducing the formation of artifacts. The connection of the microtrap to a GC–MS allows the quantitative determination of VOCs in less than 40 min with detection limits of between 5 and 10 pptv (25 °C and 760 mmHg), which correspond to 19–43 ng m−3, using sampling volumes of 775 cm3. The microtrap is applied to the analysis of environmental air contamination in different laboratories of our faculty. The results obtained indicate that most volatile compounds are easily diffused through the air and that they also may contaminate the surrounding areas when the habitual safety precautions (e.g., working under fume hoods) are used during the manipulation of solvents. The application of the microtrap to the analysis of VOCs in breath samples suggest that 2,5-dimethylfuran may be a strong indicator of a person's smoking status

Nanosuodatuskalvojen alkalikestävyys

Tässä diplomityössä tutkittiin nanosuodatuskalvojen puhdistusta ja kestävyyttä alkalipesuissa. Työn kirjallisuusosassa käsitellään kalvojen likaantumista ja eri puhdistusmenetelmiä, sekä vertaillaan kolmen nanosuodatuskalvon erotusominaisuuksia. Kokeellisessa osassa tutkittiin emäksisten pesukemikaalien vaikutusta kirjallisuusosassa esitettyihin kalvoihin. Käytetyt suodatuskalvot olivat Dow FilmTecTM NF-270, GE Osmonics Desal-5 DL ja Trisep XN45. Kalvojen puhdistukseen käytettiin Ecolabin P3-ultasil 110 ja 112 alkalipesukemikaaleja. Suodatuskokeet tehtiin laboratoriomittakaavan tasokalvojen suodatinlaitteistolla. Alkalikäsittelyitä tehtiin sekä liottamalla kalvoja säilytysastiassa että altistamalla näitä virtauksen ja paineen alaisuudessa. Vaihdettuja muuttujia oliat: pesuainekonsentraatio, lämpötila ja vaikutusaika. Kalvoissa tapahtuneita muutoksia arvioitiin mittaamalla permeabiliteettia sekä magnesiumsulfaatti- ja glukoosiretentioita. Suodatuslämpötilan nostaminen kasvatti lineaarisesti permeabiliteettia ja vastaavasti laski lineaarisesti retentiota. Kalvojen välillä ei ollut eroja permeabiliteettien lämpötilariippuvuuksissa. DL:n retentio laski vähiten lämpötilaa nostettaessa. Liotuskokeiden perusteella kestävät DL- ja NF-270-kalvot noin 1 % P3-ultrasil 110 liuoksia, sekä XN-kalvo 1,2–1,5 %:sia liuoksia, kun lämpötilana on 44 ºC ja vaikutusaikana 50 vrk. Käytettyjen pesukemikaalien välillä ei havaittu eroja. Pienen paineen ja virtauksen alla suoritetuissa käsittelyissä havaittiin alkalihajoamisen noudattavan likimain ensimmäisen kertaluvun reaktiokinetiikkaa ja käyttäytyvän likimain Arrheniuksen yhtälön ennustamalla tavalla. Myös näissä kokeissa XN45 osoittautui kestävimmäksi. Retentioiden heikkenemistä ei pystytty luotettavasti ennustamaan permeabiliteetin perusteella. Työssä osoitettiin että kalvojen muutoksia alkalipesuissa ajan funktiona voidaan ennustaa ja näin teollisuudessa voidaan ennakoida kalvojen vaihtotarvetta.

Tehtaan alueella tapahtuvan välivarastoinnin laadunvarmistus

Sisälogistiikassa on monissa eri vaiheissa varastointia. Raaka-aineita, keskeneräisiä ja valmiita tuotteita joudutaan varastoimaan yrityksen tiloissa. Varastoinnin laatuun tulee kiinnittää huomiota kaikissa vaiheissa. Varastoinnin laadunhallintaan voidaan käyttää standardin ISO 9000 mukaista laadunhallinta järjestelmää, johon kuuluu osa-alueina johdon vastuu, resurssien hallinta tuotteen toteuttaminen sekä mittaus, analysointi ja parantaminen. Logistiikan ja varastoinnin laadun tärkein mittari on asiakastyytyväisyys. Asiakkaat päättävät loppukädessä onko tuote tai palvelu vaatimusten mukainen, joten asiakkaan määrittelemien vaatimusten täyttäminen on ensiarvoisen tärkeää. Muita varastoinnin mittareita ovat suorituskyvyn mittarit sisältäen laatu- ja kustannusmittarit sekä uudistumiskyky. Työn empiriaosassa on kartoitettu Metso Paper Oy:n Rautpohjan yksikön välivarastoinnin mahdollisia laatupuutteita erilaisilla mittareilla. Tuloksien perusteella on kehitetty toimintamalli, kartoitettu ohjeistusta vaativat tahot sekä ehdotus seurannan järjestämisestä. Työssä on myös tarkasteltu vastuun jakautumista välivarastoinnin osalta.

Radio Frequency Measurement Method for Detecting Bearing Currents in Induction Motors

Induction motors are widely used in industry, and they are generally considered very reliable. They often have a critical role in industrial processes, and their failure can lead to significant losses as a result of shutdown times. Typical failures of induction motors can be classified into stator, rotor, and bearing failures. One of the reasons for a bearing damage and eventually a bearing failure is bearing currents. Bearing currents in induction motors can be divided into two main categories; classical bearing currents and inverter-induced bearing currents. A bearing damage caused by bearing currents results, for instance, from electrical discharges that take place through the lubricant film between the raceways of the inner and the outer ring and the rolling elements of a bearing. This phenomenon can be considered similar to the one of electrical discharge machining, where material is removed by a series of rapidly recurring electrical arcing discharges between an electrode and a workpiece. This thesis concentrates on bearing currents with a special reference to bearing current detection in induction motors. A bearing current detection method based on radio frequency impulse reception and detection is studied. The thesis describes how a motor can work as a “spark gap” transmitter and discusses a discharge in a bearing as a source of radio frequency impulse. It is shown that a discharge, occurring due to bearing currents, can be detected at a distance of several meters from the motor. The issues of interference, detection, and location techniques are discussed. The applicability of the method is shown with a series of measurements with a specially constructed test motor and an unmodified frequency-converter-driven motor. The radio frequency method studied provides a nonintrusive method to detect harmful bearing currents in the drive system. If bearing current mitigation techniques are applied, their effectiveness can be immediately verified with the proposed method. The method also gives a tool to estimate the harmfulness of the bearing currents by making it possible to detect and locate individual discharges inside the bearings of electric motors.