Developing cultural responsiveness in environmental design students through digital storytelling and photovoice

As the Latino population in the United States grows, it will become increasingly important for undergraduate students in environmental design and related disciplines to become more culturally responsive and learn how to understand and address challenges faced by population groups, such as Latino youth. To this end, we involved environmental design undergraduate students at the University of Colorado in a service-learning class to mentor Latino youth in the creation of multimedia narratives using photovoice and digital storytelling techniques. The introduction of technology was used as a bridge between the two groups and to provide a platform for the Latino youth to reveal their community experiences. Based on focus group results, we describe the impact on the undergraduate students and provide recommendations for similar programs that can promote cultural responsiveness through the use of digital technology and prepare environmental design students to work successfully in increasingly diverse communities.

Design and flight testing of an integrated solar powered UAV and WSN for remote gas sensing

This paper describes a generic and integrated solar powered remote Unmanned Air Vehicles (UAV) and Wireless Sensor Network (WSN) gas sensing system. The system uses a generic gas sensing system for CH4 and CO2 concentrations using metal oxide (MoX) and non-dispersive infrared sensors, and a new solar cell encapsulation method to power the UASs as well as a data management platform to store, analyse and share the information with operators and external users. The system was successfully field tested at ground and low altitudes, collecting, storing and transmitting data in real time to a central node for analysis and 3D mapping. The system can be used in a wide range of outdoor applications, especially in agriculture, bushfires, mining studies, opening the way to a ubiquitous low cost environmental monitoring. A video of the bench and flight test performed can be seen in the following link https://www.youtube.com/watch?v=Bwas7stYIxQ.

Livable Housing Design : Who will take responsibility?

Current housing design and construction practices do not meet the needs of many people with disability and older people, and limits their inclusion and participation in community and family life. In spite of a decade of advocacy for regulation of access within residential environments, the Australian government has opted for a voluntary approach where the housing industry takes responsibility. Housing industry leaders have indicated that they are willing to transform their established practice, if it makes good business to do so, and if there is a demand from home buyers. To date, there has been minimal demand. In 2010, housing industry and community leaders formalised this commitment in an agreement, called Livable Housing Design, to transform housing design and construction practices, with a target of all new housing providing minimal access by 2020. This paper reports on a study which examined the assumption behind Livable Housing Design agreement; that is, individuals in the housing industry will respond voluntarily and take responsibility for the provision of inclusive housing. From interviews with developers, designers and builders in Brisbane, Queensland, the study found a complex picture of competing demands and responsibilities. Instead of changing their design and construction practices voluntarily to meet the future needs of users over the life of housing, they are more likely to focus on their immediate contractual obligations and to maintain the status quo. Contrary to the view of the government and industry leaders, participants identified that an external regulatory framework would be required if Livable Housing Design’s 2020 goal was to be met.

Treatment rationale study design for the MetLung trial : a randomized, double-blind phase III study of onartuzumab (MetMAb) in combination with erlotinib versus erlotinib alone in patients who have received standard chemotherapy for stage IIIB or IV met-positive non-small-cell lung cancer

We present the treatment rationale and study design of the MetLung phase III study. This study will investigate onartuzumab (MetMAb) in combination with erlotinib compared with erlotinib alone, as second- or third-line treatment, in patients with advanced non-small-cell lung cancer (NSCLC) who are Met-positive by immunohistochemistry. Approximately 490 patients (245 per treatment arm) will receive erlotinib (150 mg oral daily) plus onartuzumab or placebo (15 mg/kg intravenous every 3 weeks) until disease progression, unacceptable toxicity, patient or physician decision to discontinue, or death. The efficacy objectives of this study are to compare overall survival (OS) (primary endpoint), progression-free survival, and response rates between the 2 treatment arms. In addition, safety, quality of life, pharmacokinetics, and translational research will be investigated across treatment arms. If the primary objective (OS) is achieved, this study will provide robust results toward an alternative treatment option for patients with Met-positive second- or third-line NSCLC. © 2012 Elsevier Inc. All Rights Reserved.

Design thinking and management education : benefits for problem framing and problem solving

Design and design thinking are identified as making valuable contributions to business and management. The numbers of higher education programs that teach design thinking to business students and executives are growing, however to date little information about the outcomes of these initiatives has emerged. This paper presents the findings from the incorporation of design thinking and methods in one unit of an MBA program. All 90 participants from three MBA classes wholeheartedly expressed their support for this initiative. An evaluation of this experiment found positive reactions, learning, changes in behaviour and positive results for their companies. The challenges and future directions for the inclusion of design thinking and design methods in management education programs are proposed.

Improving work and life balance : building a multilevel model of work-life balance focusing on group structure and relational job design

One in five Australian workers believes that work doesn’t fit well with their family and social commitments. Concurrently, organisations are recognising that to stay competitive they need policies and practices that support the multiple aspects of employees’ lives. Many employees work in group environments yet there is currently little group level work-life balance research. This paper proposes a new theoretical framework developed to understand the design of work groups to better facilitate work-life balance. This new framework focuses on task and relational job designs, group structures and processes and workplace culture.

The potential of combining phenomenography, variation theory and threshold concepts to inform curriculum design in higher education

This chapter describes an innovative method of curriculum design that is based on combining phenomenographic research, and the associated variation theory of learning, with the notion of disciplinary threshold concepts to focus specialised design attention on the most significant and difficult parts of the curriculum. The method involves three primary stages: (i) identification of disciplinary concepts worthy of intensive curriculum design attention, using the criteria for threshold concepts; (ii) action research into variation in students’ understandings/misunderstandings of those concepts, using phenomenography as the research approach; (iii) design of learning activities to address the poorer understandings identified in the second stage, using variation theory as a guiding framework. The curriculum design method is inherently theory and evidence based. It was developed and trialed during a two-year project funded by the Australian Learning and Teaching Council, using physics and law disciplines as case studies. Disciplinary teachers’ perceptions of the impact of the method on their teaching and understanding of student learning were profound. Attempts to measure the impact on student learning were less conclusive; teachers often unintentionally deviated from the design when putting it into practice for the first time. Suggestions for improved implementation of the method are discussed.

A novel T-DNA vector design for selection of transgenic lines with simple transgene integration and stable transgene expression

Plants transformed with Agrobacterium frequently contain T-DNA concatamers with direct-repeat (d/r) or inverted-repeat (i/r) transgene integrations, and these repetitive T-DNA insertions are often associated with transgene silencing. To facilitate the selection of transgenic lines with simple T-DNA insertions, we constructed a binary vector (pSIV) based on the principle of hairpin RNA (hpRNA)-induced gene silencing. The vector is designed so that any transformed cells that contain more than one insertion per locus should generate hpRNA against the selective marker gene, leading to its silencing. These cells should, therefore, be sensitive to the selective agent and less likely to regenerate. Results from Arabidopsis and tobacco transformation showed that pSIV gave considerably fewer transgenic lines with repetitive insertions than did a conventional T-DNA vector (pCON). Furthermore, the transgene was more stably expressed in the pSIV plants than in the pCON plants. Rescue of plant DNA flanking sequences from pSIV plants was significantly more frequent than from pCON plants, suggesting that pSIV is potentially useful for T-DNA tagging. Our results revealed a perfect correlation between the presence of tail-to-tail inverted repeats and transgene silencing, supporting the view that read-through hpRNA transcript derived from i/r T-DNA insertions is a primary inducer of transgene silencing in plants. © CSIRO 2005.

Construct design for efficient, effective and high-throughput gene silencing in plants

Post-transcriptional silencing of plant genes using anti-sense or co-suppression constructs usually results in only a modest proportion of silenced individuals. Recent work has demonstrated the potential for constructs encoding self-complementary 'hairpin' RNA (hpRNA) to efficiently silence genes. In this study we examine design rules for efficient gene silencing, in terms of both the proportion of independent transgenic plants showing silencing, and the degree of silencing. Using hpRNA constructs containing sense/anti-sense arms ranging from 98 to 853 nt gave efficient silencing in a wide range of plant species, and inclusion of an intron in these constructs had a consistently enhancing effect. Intron-containing constructs (ihpRNA) generally gave 90-100% of independent transgenic plants showing silencing. The degree of silencing with these constructs was much greater than that obtained using either co-suppression or anti-sense constructs. We have made a generic vector, pHANNIBAL, that allows a simple, single PCR product from a gene of interest to be easily converted into a highly effective ihpRNA silencing construct. We have also created a high-throughput vector, pHELLSGATE, that should facilitate the cloning of gene libraries or large numbers of defined genes, such as those in EST collections, using an in vitro recombinase system. This system may facilitate the large-scale determination and discovery of plant gene functions in the same way as RNAi is being used to examine gene function in Caenorhabditis elegans.

The Effective and The Evocative : A Spectrum of Creative Practice Research

In the expanding literature on creative practice research, art and design are often described as a unified field. They are bracketed together (art-and-design), referred to as interchangeable terms (art/design), and nested together, as if the practices of one domain encompass the other. However it is possible to establish substantial differences in research approaches. In this chapter we argue that core distinctions arise out of the goals of the research, intentions invested in the resulting “artefacts” (creative works, products, events), and the knowledge claims made for the research outcomes. Moreover, these fundamental differences give rise to a number of contingent attributes of the research such as the forming contexts, methodological approaches, and ways of evidencing and reporting new knowledge. We do not strictly ascribe these differences to disciplinary contexts. Rather, we use the terms effective practice research and evocative practice research to describe the spirit of the two distinctive research paradigms we identify. In short, effective practice research (often pursued in design fields) seeks a solution (or resolution) to a problem identified with a particular community, and it produces an artefact that addresses this problem by effecting change (making a situation, product or process more efficient or effective in some way). On the other hand, evocative practice research (often pursued by creative arts fields) is driven by individual pre-occupations, cultural concerns or human experience more broadly. It produces artefacts that evoke affect and resonance, and are poetically irreducible in meaning. We cite recent examples of creative research projects that illustrate the distinctions we identify. We then go on to describe projects that integrate these modes of research. In this way, we map out a creative research spectrum, with distinct poles as well as multiple hybrid possibilities. The hybrid projects we reference are not presented as evidence an undifferentiated field. Instead, we argue that they integrate research modes in deliberate, purposeful and distinctive ways: employing effective practice research methods in the production of evocative artefacts or harnessing evocative (as well as effective) research paradigms to effect change.

Editorial : Global 21st century professionals : developing capability to work with Indigenous and other traditionally-oriented peoples

International agreement on the framework for protecting the rights of Indigenous populations within nation states has occurred alongside unprecedented levels of globalisation of other previously nation-based activities such as economic and social provision and planning. As the idea of the postcolonial democratic state emerges, this collection undertakes an international and comparative examination of the role of higher education in educating globally aware professionals who are able to work effectively and in cultural safety with Indigenous Peoples...

μAV - Design and implementation of an open source micro quadrotor

This paper presents the design of μAV, a palm size open source micro quadrotor constructed on a single Printed Circuit Board. The aim of the micro quadrotor is to provide a lightweight (approximately 86g) and cheap robotic research platform that can be used for a range of robotic applications. One possible application could be a cheap test bed for robotic swarm research. The goal of this paper is to give an overview of the design and capabilities of the micro quadrotor. The micro quadrotor is complete with a 9 Degree of Freedom Inertial Measurement Unit, a Gumstix Overo® Computer-On-Module which can run the widely used Robot Operating System (ROS) for use with other research algorithms.

Design and ethics in digital mental health promotion

This chapter presents a case study of Participatory Design as a design framework for developing interactive digital tools for promoting children’s resilience. The author argues for a participatory methodology as an ethical approach that involves children as co-designers in the process from which they are traditionally excluded, namely the creative design process and the process of mental health promotion.

Design, synthesis and spectroscopic characterisation of a focused library based on the polyandrocarpamine natural product scaffold

A focused library based on the marine natural products polyandrocarpamines A (1) and B (2) has been designed and synthesised using parallel solution-phase chemistry. In silico physicochemical property calculations were performed on synthetic candidates in order to optimise the library for drug discovery and chemical biology. A library of ten 2-aminoimidazolone products (3–12) was prepared by coupling glycocyamidine and a variety of aldehydes using a one-step stereoselective aldol condensation reaction under microwave conditions. All analogues were characterised by NMR, UV, IR and MS. The library was evaluated for cytotoxicity towards the prostate cancer cell lines, LNCaP, PC-3 and 22Rv1.

The role of the non-government organisation (NGO) in practicing editorial photography in a globalised media environment

The news media industry has changed dramatically in the last 10 to 20 years into a global business with ever increasing attention being devoted to entertainment and celebrity. There is also a growing reliance on images produced by citizens (citizen photojournalism) by media outlets and publishers. It is widely acknowledged this has shrunk publication opportunities for professional photographers undertaking editorial projects. As a result, photographers are increasingly relying on non-government organisations (NGOs) to gain access to photographing issues and events in developing countries and to expand their economic and portfolio opportunities. This increase of photographers working for and alongside NGOs has given rise to a new genre of editorial photography I call NGO Reportage. By way of a case study, an exploration of this new genre reveals important issues for photographers working alongside NGO’s and examines the constructed narratives of images contained within these emerging practices.