1.55μm Fabry-Perot Thermo-Optical Tunable Filter with amorphous-Si as Cavity

A 1.55μm Fabry-Perot (F-P) thermo-optical tunable filter is fabricated. The cavity is made of amorphous silicon (a-Si) layer grown by electron-beam evaporation technique. Due to the excellent thermo-optical property of a-Si, the refractive index of the F-P cavity will be changed by heating; the transmittance resonant peak will therefore shift substantially. The measured tuning range is 12nm, FWHM (full-width-at-half-maximum) of the transmission peak is 9nm, and heating efficiency is 0.1K/mW. The large FWHM is mainly due to the non-ideal coating deposition and mirror undulation. Possible improvements to increase the efficiency of heating are suggested.

Spotsize Converter Integrated DFB Laser Diode Using Selective Area Growth of MOCVD

The characteristics of thickness enhancement factor and bandgap wavelength of selectively grown In-GaAsP are investigated. A high thickness enhancement factor of 2.9 is obtained. Spotsize converter integrated DFB lasers are fabricated by using the technique of SAG. The threshold current is as low as 10.8mA. The output power is 10m W at 60mA without coating and the SMSR is 35.8dB. The vertical far field angle (FWHM) is decreased from 34 °to 9 °. The tolerance of 1dBm misalignment is 3.4μm vertically.

Design of spectrometer based on volume phase grating for near infrared range

In order to design and fabricate a spectrometer for the infrared range widely used in the different applications, Volume Phase Grating (VPG) with. low Polarization Dependence Loss (PDL) and high efficiency has been adopted as the dispersion element. VPG is constructed by coating an optical substrate with a thin film of dichromated. gelatin and exposing the film to two mutually coherent laser beams to form index modulation. The diffraction efficiency for a VPG is governed by Bragg effects. The depth (d) and index modulation contrast of the grating structure control the efficiency at which the light is diffracted when the Bragg condition is satisfied. Gradient index lens with high performance and low aberration are used as collimating system instead of standard lens. The spot diagrams and MTF curve of the collimating lens are shown in the paper. The receive system is InCaAs photodiode (PD) array including 512 pixels with 25 mum pitch. The spectrum resolution of the spectrometer reaches to 0.2nm and wavelength accuracy is 40pm.

1.5 mu m DFB integrated with vertical tapered spotsize converter fabricated by selective MOVPE

1.5 mu m DFB LD butt-joint integrated with vertical tapered spotsize converter was fabricated by LP-MOVPE. The vertical far field angle (FWHM) was decreased from 34degrees to 10degrees the threshold currents was as low as 19.8mA, the output power was 9.6mw at 100mA without HR coating and the SMSR was 35.8dB. The 1-dBm misalignment tolerance was 3.2 mu m, while the counterpart of the device without SSC was 2.2 mu m.

Electrical bistability and negative differential resistance in diodes based on silver nanoparticle-poly(N-vinylcarbazole) composites

An electrically bistable device has been fabricated using nanocomposite films consisting of silver nanoparticles and a semiconducting polymer by a simple spin-coating method. The current-voltage characteristics of the as-fabricated devices exhibit an obvious electrical bistability and negative differential resistance effect. The current ratio between the high-conducting state and low-conducting state can reach more than 103 at room temperature. The electrical bistability of the device is attributed to the electric-filed-induced charge transfer between the silver nanoparticles and the polymer, and the negative differential resistance behavior is related to the charge trapping in the silver nanoparticles. The results open up a simple approach to fabricate high quality electrically bistable devices by doping metal nanoparticles into polymer.

Broadly Tunable Grating-Coupled External Cavity Laser With Quantum-Dot Active Region

A broadly tunable and high-power grating-coupled external cavity laser with a tuning range of more than 200 nm and a similar to 200-mW maximum output power was realized, by utilizing a gain device with the chirped multiple quantum-dot (QD) active layers and bent waveguide structure. The chirped QD active medium, which consists of QD layers with InGaAs strain-reducing layers different in thickness, is beneficial to the broadening of the material gain spectrum. The bent waveguide structure and facet antireflection coating are both effective for the suppression of inner-cavity lasing under large injection current.

包膜与添加抑制剂结合型尿素的控效机理

对尿素进行包膜是控制尿素溶出的有效措施，但尿素包膜不能控制尿素溶出后的土壤生物化学转化行为。为了既控制尿素的溶出行为又控制溶出后尿素的水解或水解生成NH4+的硝化过程，本研究利用流化床喷涂技术将脉酶抑制剂氢醒（HQ）和硝化抑制剂双氰胺（DCD）分别加入聚合物包膜尿素内。包膜层的化学组成和通透性抉定性地影响着尿素和抑制剂的溶出特征。尿素从聚合物包膜内溶出过程可分成4个阶段：滞后阶段、溶胀阶段、稳定阶段和衰退阶段。在土壤中，HQ和DCD从包膜内溶出的速度快于尿素。尿素和HQ的同时缓慢溶出使尿素的水解过程比较平缓，有效避免了尿素在土壤中迅速水解所造成的土壤NH4+-N激增和土壤pH剧烈增加现象，使尿素氮的NH3挥发损失大幅度降低。DCD和尿素的同时控制溶出减小了DCD淋失的可能性，延长并增强了DCD对土壤硝化作用的抑制效果，并显著降低了土壤NO3-的淋失。水稻盆栽试验、小麦一白菜复种微区试验和玉米田间小区试验的结果表明，包膜尿素中添加DCD表现出了较高的肥效。施用添加DCD的包膜尿素明显增加了土壤NH4+-N的供应，增加了作物的N累积吸收量，并且使白菜产量显著增加了31.3％（与尿素分施相比）。尽管在包膜尿素中添加HO明显降低了土壤NH3挥发损失的可能性，但施用添加HQ的包膜尿素处理仅获得了与尿素分施处理相当的作物生物性状、N累积吸收量和产量。